r 600 used for sale

Machine type MIG/MAG inverter welding system Make RILAND Type MIG 180PGDM Supply voltage 1 x 230 volts Adjustment range 15 – 180 amperes Duty cycle 20 % ED at 180 amps 60% ED at 110 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Portable assembly system version Wire feed gearbox 2-roller gearbox Fuse 16 Ampere Dimensions L x W x H 386 x 170 x 300 mm Special accessories TIG welding DC without HF E-welding Weight 8 kg Age 2 years As good as new Scope of delivery welding system with the following accessories: 1 piece welding torch MB 24, 2 mtr. Long 1 piece pressure reducer argon 1 piece ground cable 3 mtr. long, 16 sq m 1 piece electric welding cable 3 mtr. long, 16 sq m 1 piece of aluminum equipment 3 power nozzles aluminum, 1.0 mm Ø 3 pieces of current nozzles stee ...

Auslaugungsvorrichtung. Sehr guter Zustand. Sprechen Sie mich gerne an.

Donutpfanne Riehle gebraucht

Control cabinet, distribution cabinet, control cabinet TS modular cabinet, profile door -Profile door KTS for: refrigerator -TS8 1200 x 2200 -Price: per piece -Number: 2 pieces -Dimensions: 2240/680/H280 mm -Weight: 66 kg

Teigschlagmaschine verwendet. Die Maschine ist nach einer Generalüberholung betriebsbereit. Enthält zwei Stangen und zwei Kessel. Für weitere Informationen kontaktieren Sie mich bitte.

Industrial Ethernet Switch, Netzwerk Switch, Lan- Switch, Rail Switch -Hirschmann: RS20 Rail Switch -Abmessungen: 125/70/H130 mm -Gewicht: 0,4 kg

Inv. Num. : 6445 Type: BF 74 Producer: CDM ROVELLA Generated: 2008 Parameters: Workpiece length: 800 mm Workpiece width: 550 mm travel length of the X-axis: 700 mm Travel length of the Y-axis: 400 mm Travel length of the Z-axis: 350 mm Maximum table load: 2000 kg Maximum electrode weight: 90 kg Tank dimensions: 1200 x 750 x 505 mm Weight: 4400 kg

Gear motor, electric motor, electric gear motor, angular gear motor, automatic band saw -Manufacturer: Ruhr gear, angular gear motor -Type: NDK 8760 -Speed: 3000 rpm -Voltage: 200 V/0.15 A -Shaft: Ø 10 x 30 mm -Accessories: V-belt attachment incl. -Dimensions: 245/160/H155 mm -Weight: 4.5 kg

The power plant, based on a 5 MW gas turbine CENTRAX 501 KB7 is complete with all needed equipment, allowing a steam output of 20 tons per hour at 20 bar. From ZERO hours until the last working day all maintenance was performed by Centrax under full maintenance contract.

Belt rounder for rye bread. Used in good working condition

transformer -Marcus: M3785OT 80C RISE -VA: 1000 VA -Frequency: 60 Hz -Voltage: 230/120 V -Price: per piece -Number: 2 pieces available -Dimensions: 160/130/H110 mm -Weight: 11.3 kg

Rego Herlitzius Rotec 350 circular knife bread slicer Type: Rotec 350 - Circular knife - Year of construction 2010 - Cutting width: 3 – 25mm - completely made of stainless steel - for breads max 3250mm length - on wheels - tested and cleaned External dimensions: 83x70x107cm (WxDxH)

Belt moulder for rye bread used good working condition

Control cabinet, distribution cabinet, control cabinet, TS modular cabinet -Mounting plate for: control cabinet -Dimensions: 1895/500/22 mm -Weight: 28 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 40 mm -Piston diameter: 32 mm -Piston rod: 12 mm -Price: per piece -Number: 2 pieces -Dimensions: 85/56/H45 mm -Weight: 0.35 kg/piece

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 500 mm -Piston diameter: 25 mm -Piston rod: 10 mm -Dimensions: 640/28/H28 mm -Weight: 0.95 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 50 mm -Piston diameter: 50 mm -Piston rod: 18 mm -Thread intake: M16 -Air inlet and outlet: adjustable -Price: per piece -Number: 2 pieces -Dimensions: 233/65/H65 mm -Weight: 2.35 kg/piece

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 150 mm -Piston diameter: 63 mm -Piston rod: 20 mm -Thread intake: M16 -Air inlet and outlet: adjustable -Price: per piece -Number: 2 pieces -Dimensions: 405/75/H75 mm -Weight: 3.6 kg/piece

Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Stroke travel: 50 mm -Piston diameter: 50 mm -Piston rod: 16 mm -Price: per piece -Quantity: 2 pieces -Dimensions: 104/66/H73 mm -Weight: 0.8 kg/piece

pressure: 100 t table length: 2000 mm table width: 1580 mm stroke: mm pressing speed: mm/sec voltage: 400 V return capacity: t max. table loading capacity: 10.000 / 20.000 kg total power requirement: 18 kW weight of the machine ca.: 22 t dimensions of the machine ca.: 5,65 x 2,95 x 5,85 m Serial no: 03.246.00 max. Distance between columns (width) 1620 mm max.load upper table no swiveling 10t / swiveling 6t max.load lower table 22t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

-Year 1990, Jogger with air press roller -Max paper size 1450x1130 mms. -Blowing plane -Folding squares on both sides -Height of introduction 16.5 cm -Max operating pressure 6-7 bar -380 V power supply

Metal detector Safeline V4-wheel Mettler Toledo - Model: V4-RAD - Metal detection - Voltage voltage: 100.240 Vac - Frequency: 50 /60 Hz - Power: 340 W (Max.)

Forklift motor with gearbox, electric motor, DC motor, traction motor, drive motor -Voltage: 23 volts -Power: 3 kW -Speed: 1705 rpm -Drive motor for: Steinbock forklifts -Dimensions: 375/230/H200 mm -Weight: 25 kg

Rheon VX is a series of stress free dividers, which can divide most of doughs - even extremely moist. From rye tin bread to italian ciabatta flat bread (see photos for examples and our test products). The machine has been fully renovated in 2020 and is ready for work! Weight range: One row: 100 - 2000 gr two rows: 30 - 1500 gr Length range: 75 - 999 mm Max. cutting speed per row: 20 cuts per minute. If you find the machine interesting, let me know via phone, mail or whatsapp!

Rheon KN-171 encrusting machine The new Cornucopia® KN-171 was designed to specialize in confectionery. Even more compact than former models, the KN-171 boasts versatility and adaptability. And the possibilities keep expanding. Flexible product weight, filling/dough ratio and length Description: Output: 1200~max. 6000 pcs./h At conveyor’s up and down mechanism: 3600 pcs./h (differs according to product weight), Capacity: max. 180 kg/h Product Length Range (cylindrical) no limitation Product Weight Range (spherical) 10~90 g Dimensions:1516x874x1360 mm. Call and make an appointment for the Machine show!

working length: 2451 mm Working width: 2170 mm Working height: 800-1000 mm Haberkorn return conveyor approx. 2,451 mm x 2,170 mm ---------------------------------------------- base frame - Steel tube frame 50 x 50 x 2 mm - Height-adjustable trestles (approx. 800mm - 1000mm) - Conveyor system for wood lengths from 300mm to 4200mm - Conveyor system for wood widths up to 240mm Roller conveyor - infeed - Continuously driven roller conveyor approx. 5 - 25m/min - Drive via gear motor 0.37kW, vertical shaft and PU round belt - Roll diameter 50mm, 240mm roll jacket length with PVC jacket - Transfer to cross conveyor by lifting - lowering the roller conveyor - Roller cover according to HBG cross conveyor - Cross conveyor with 6 traverses - Conveyor belts PVC coated (green) 50mm wide, guided in plastic tracks - Continuously driven cross conveyor approx. 5 - 20m/min - Drive via geared motor 0.37kW  ...

Fan filter, fan array, air cooler, control cabinet fan, filter fan -Rittal: SK 3241.100 filter fan -Filter: 230 V/40 W -Price: per piece -Quantity: 8 pieces -Dimensions: 255/255/H120 mm -Weight: 1.7 kg/piece

Rademaker / Rondo ‘salmon en croute’ line Rademaker block processor with Rondo make up line. Has been producing ‘Salmon en croute’ for major UK supermarkets. Whole line is in lovely condition and can obviously be easily adapted to run other products like pasties, sausage rolls etc. Mainly used seasonally so only 11,800 running hours.

Face plate, face plate chuck, four-jaw chuck -Chuck size: Ø 355 mm -Admission thread pitch: 4 mm -Rezess: Ø 70 mm -Weight: 35 kg

Rupes HE900 Turbine High Vacuum Suction Note: Rupes Type: HE900 Year of construction: 2009 Net worth: 7,5 PK turbine - direkt aangedreven Drive: 5,5KW / 7,5PK electric motor Dust-air separation: cycloon Suction line: ø 80mm Capacity: 6 to 8 werkplekken Air volume: 530 m3/hour Vacuum: 28.4 kPa Cleaning: Automatic filter reiniging met perslucht Perslucht: 6 bar Noise: 71 dB(A) Dimensions: Filter box: 1.000.551.50 meters

Three-jaw chuck, three-jaw lathe chuck -Chuck size: 240 mm -Mounting flange: M80 x 6 mm -without: interchangeable jaws -Weight: 26 kg

Code: 0046 Brand: OMS Model: FC 300 RAP - CE Standard Crosscutting machine with suction base for cutting frames, furniture, window frames, Pvc, aluminium - CE Standard Technical data Blade diameter mm 300 Motor Watt 2800 three-phase - Rpm 3000 Swivelling head Base with suction unit Overall dimensions mm 500 x 400 x 1500 h Weight kg 80

pile turner Rachner RD 800 P; condition outdated; Format 600x900; Load capacity 800kg; new tilting cylinder; upper cylinder overhauled; pump and tank cleaned; new tilt valve. Pile turner Rachner RD 800 P; condition rebuilt; size 600x900mm; lifting capacity 800kg; new turning cylinder; upper cylinder rebuilt; pump and tank cleaned; new turning valve.

Combi sheeter Seewer Rondo SKO68 Seewer Rondo SKO 68 Sheeter - Seewer Rondo dough sheeter - with 2 bands - right left rotation -left strap extendable -Hinged straps - mobile on wheels - Machine is functionally tested and cleaned

rotary table dia.: . mm max. dia. of grinding wheel: . mm with manual ongoing: . 0 manually feed: . 0 0.4 KW The technical Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

approx. 24 pieces frame SSI Schaefer R3000, depth 30cm - used - : Price per piece: only 30.- € (net), packed and loaded from location! Manufacturer: SSI Schaefer Type: R3000 Year of construction: unknown Frame height: approx. 2.28m Frame depth: 30cm Condition: good Available: as of now Location. Frankenberg / Saxony

approx. 870 shelves SSI Schaefer R3000, shelves approx. 1,m x 0,40m - used - : Price per piece: only 8,50 € (net), packed and loaded ex location! Minimum order 1 pallet (approx. 180 pieces) Manufacturer: SSI Schaefer Type: R3000 Year of construction: unknown Dimensions: approx. 1m x 0,40cm 870 shelves Payload per floor: min. 100kg Condition: good Available: as of now Location. Frankenberg / Saxony

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 200 mm -Recess: Ø 160 mm -Bolt circle: Ø 180 mm -Passage: Ø 55 mm -Weight: 14 kg

Lawn building machine Sembdner RS 60 R, working width 60 cm, drive F&S 2-stroke petrol engine. Reversing gearbox for forward and reverse travel. Equipment: smooth roller with scrapers at the front, hedgehog with cleaning cage in the middle, smooth roller with scrapers (water-fillable) at the rear, seed container with brush shaft and dosing slide. Technically good condition, but with flash rust and engine without ignition sparks - does not start. Branded product from Munich (Germany). Shipping optionally possible.

Knife sharpening machine clamping length 820mm V 380 kW 0.75

Tetra Pak TCAP/21 1000 ml ReCap 3 applicator We offer: Tetra Pak TCAP/21 ReCap 3 applicator for 1000 ml Tetra Pak beverage cartons, Year of construction 2004 - in very good condition - optimally maintained Subject to prior sale

Tetra Pak TCAP/21 1000 ml ReCap 3 Applicator We offer: Tetra Pak TCAP/21 ReCap 3 Applicator for 1000 ml Tetra Pak beverage cartons, manufacturing year 2004 - in very good condition - excellent serviced Available from stock Prior sales reserved

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 320 mm -Piston diameter: 25 mm -Piston rod: 10 mm -Price: per piece -Number: 3 pieces -Dimensions: 462/28/H28 mm -Weight: 0.7 kg/piece

Pneumatic material feed Feed length: 800 mm (multiple stroke possible, max. 2,400 mm) saw blade diameter: 500 mm Cuts between 45° and 90° possible Saw blade speed: 2850 rpm Infinitely adjustable saw feed Minimum quantity spraying device Piece counter with automatic switch-off Weight: 600 kg

NH fuse switch disconnector -Current: max. 160 A -Size: 00 -3-pin -Number: 9x NH fuse switch disconnectors available -Price: per piece -Dimensions: 230/120/H140 mm -Weight: 1 kg

RASKIN RT 64-2 punching machine manufactured in Switzerland in 1981, is designed for precise punching of holes in workpieces made of e.g. stainless steel, with a force of 30 tonnes. Technical parameters of the RASKIN RT 64-2 punching machine - maximum press force: 30 t - CNC control - number of strokes: 400/min - power supply of machine RT 64: 3x 380 V; 50 Hz

Centrifugal pump, water pump -Delivery rate: 18 m³/h -Motor power: 1.1 kW -Connection: 380 V -Speed: 1400 rpm -Pipe connection inlet: DN Ø 64 mm -Pipe connection outlet: DN Ø 49 mm -Dimensions: 410/250/H300 mm -Weight: 34 kg

C-shaped screw clamp, screw clamps, steel construction clamps, clamps, clamping tools -Span width: approx. 500 mm -Clamping depth: approx. 200 mm -Dimensions: 650/290/H40 mm -Weight: 5.7 kg

REGO-Schläger. Nach einer Generalsanierung - voll funktionsfähig. Wir können den Film in privaten Nachrichten verschicken. Bitte kontaktieren Sie mich, wenn Sie interessiert sind.

PLC control, machine control, module -Manufacturer number: 1125 -Serial number: 109-178-4201 -Dimensions: 190/130/H30 mm -Weight: 0.3 kg