r 37 k used for sale

Brotschneidemaschine REX Gebrauchte - in Backereizustand - Technisch Gut - ab Lager - Preis auf Anfrage

SPECIFICATIONS: Max. machining width: 800mm Working height: 150mm Installed power Kw: 3.0 2 brushing units consisting of 4 counter-rotating brushes Ø250mm x 220 mm Transport carpet with speed control Controller

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: 40 mm -Piston rod: Ø 20 mm -Stroke: 150 mm -universally applicable: -Number: 1x available -Price: per piece -Dimensions: Ø 50/H445 mm -Weight: 6 kg

Hydraulic pump, oil pump, gear pump -Power: 0.8 kW 1370 rpm -Protection class: -Dimensions: Ø 154/H485 mm -Weight: 26 kg

Board cutter - board shear Make Robust Model 1400 Year 1980's Cutting length 140 cm Details Iron cast table 100 cm, front lay+small cut device, back lay Available Direct

Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump -Connection: volts -Power kW - Delivery rate: 100 l / min -Dimensions: O 250 / H330 mm -Weight: 20 kg

Used steam boiler made by Roucka, capacity 2.5 tons of steam per hour and pressure 9.2 bar. New 1994. Oil burner, control cabinet, fittings.

Make : Regal Model : 9000 YoM: 2004 Refurbished in 2018 Current Cup Dimensions: 71 mm ( This can be changed on request) Speed : 2400 Cups per Hour Stations : Cup Dispenser- Filler - Aluminium Lid - Sealing - Outfeed conveyor Controls : Very Good condition Available : Immediately after service Location : Dairy Machinery UK

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 125 mm -without: interchangeable jaws -Passage: Ø 32 mm -Number: 1x feed available -Price: per piece -Weight: 5.4 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 80 mm -without: interchangeable jaws -Flange: 175 mm -Passage: Ø 19 mm -Dimensions: Ø 175 x 250 mm -Weight: 8.9 kg

Ross Industries A10 Tray sealer Serial: 406 2011, stainless tray sealer, modified atmosphere or seal only, up to 10 trays per min, seals two tray at a time, tray dims 200mm x 160mm, adjustable temp and timer controls, 3Ph

Electric motor with hydraulic pump for sale. Engine characteristics: Type: 280S/M-4 Power: 85kW n: 1780 1/min Pump characteristics: n: 1760 1/min Pressure 450 bar Other hydraulic accessories available.

It is a used, reconditioned Rego stirring and beating machine SM 2 (20 liters) for sale. The speed of the machine is infinitely adjustable. With automatic running of the timer, bowl height adjustment by crank revolution. Electrical conversion from beating to stirring, real deflection due to stationary shaft. The machine has a new stirring head, has been completely re-mounted and painted. It is in very good condition and runs very smoothly. External dimensions: width: 60cm, depth: 50cm, height: 140cm Incl. bowl, stirring tool, beating tool. Price on request.

4 pieces of hydraulic pump flanged to electric motor complete with accessories on Euro plate for sale. Characteristics pump Rexroth A10VSO 28 DR / 31 R Vg: 26cm3 DR: 240 Bar n: 1750 1/min Engine characteristics: Hatlapa 180M -4 Power: 21kW Other accessories: - 1 piece Blitz pressure vessel 40 liters / 16 bar - 2 Hydac filters, 25 bar - 2 pieces hydraulic pump - see photos for more

Teaching or test bench for hydraulic components with all accessories for sale.

Rotary indexing table with 12 stations Automatic ejector three pressing stages Pressure capacity 1,000 KN Stroke 12-120 mm Stroke rate 30-60 1/min Plunger adjustment 80 mm Total weight 9,500 kg

Swivel bending machine, edge bench, gutters, roof gutters, beading machine, beading machine -Max. Working width: 1280 mm -Max. Sheet thickness: 1.75 mm -Opening width: 180 mm -Clamping via: threaded spindle -Bending angle adjustable via: stop -Dimensions: 1850/600/H1240 mm -Weight: 380 kg

RYOBI 754P , 2x2 PLATE RUNNING 765 X 545 PLATE MAX 78 X 60 Year 2007 Imp 30 Mio Perfecting - Automatic Automatic Rubber And Color Washers Autoplate IR-dryer Material thickness 0,04 - 0,6 mm No Damages On Cylinders And Gears

Horizontal milling machine Reckermann EW 900 Pony TNC 135 380 V 32 A 12,35 KW X 720 mm Y 370 mm Z 350 mm ISO 40 Weight 4 tons Vogel central lubrication Grooves 18 mm Speed range 40 - 2000 rpm Feed in all axes Data

Ryobi 522HE year 2008 Impressions 22 mil Semi-Automatic plate change, Technotrans Refrigeration, Automatic Blanket Cylinders & Inking Rollers washing devices Powder spray, Double Sheet & Side lay Detector Numbering and Perforating unit

Dough filling and dosing machine Rheon KN 200 Cornucopia used Rheon KN 200 dough filling and dosing machine.The machine has been tested for function, can be viewed and tested in the warehouse in Bielefeld. We will be happy to send you further pictures and information on request. - Dough pieces: 10-300 gr. - Output : 10-60 pieces/min -digital control - Stainless steel cladding - rollable on wheels - used Rheon KN 200 for bakery confectionery

HUSKY HPETL230E-RSE95D-95 + 48 CAV HOT RUNNER + AUX inc CHILLER DEC 2015 Mold: INCLUDED (HUSKY) ATTENTION NO COLD HALF INCLUDED Cycle time : 9 sec Including accessories 1.Dehumidifying dryer 2.Chiller 3.Hopper 4.Robot 5.Dew condensation prevention device FAST DELIVERY LOCATED IN ASIA FREQ BOTH 50 AND 60HZ

Size: 570 x 330 x 60 mm, speed: 1.600 c/h, 8 clamps, hotmelt spine gluing unit, hotmelt side gluing unit, milling and roughening station, cover station, pressing station, delivery

diameter: 250 mm diameter: 250 mm numer of jaw: 4 Stück numer of jaw: 4 Stück bore: Ø 75 mm bore: Ø 75 mm thickness of jaw: 23 mm thickness of jaw: 23 mm : 41 mm : 41 mm tool adaptor: KK6 DIN 55027 tool adaptor: KK6 DIN 55027 weight: 32 kg - Serial-No.: 01330 - Flat spiral chuck - Jaws centrically clamping and individually adjustable - with chuck key The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Extraction system / briquetting press Extraction system 11 KW Briquetting press 7 KW

Perfector 1/5 and 6/0, RCI CCI Comand Table, SAPC Semi Autoplate Change, Rolandmatic Dampening with Technotrans Refrigerator, Auto-Wash, Double Size Impression Cylinders, Roland Mabeg Jet Feeder, Steel Plate on Overlap, High Pile Delivery, Autosize, IR Dryer and UV Dryer, Standard Accessories

Diameter: 630 mm. The 4-jaw mini lathe chuck body is made of cast iron, Bayonet cone 8.

Sachman RP3 milling machine :::SPECIFICATIONS::: CNC Model: Heidenhain CNC version: TNC 426 Head type: Manual bi-rotary head Tool connection: iso 50 Spindle power: 15Kw Number of spindle revolutions: 3000 X Shaft Stroke: 2500mm Y-axis stroke: 800mm Z Axis Stroke: 950mm Table dimensions: 2700 x730mm Guides: flat Type of cutter: fixed bench Mechanical range change: yes :::D IMENSIONS AND WEIGHT::: Length: 4500mm Width: 3736mm Height: 2775mm Weight: 12500Kg

Gear grinder REISHAUER OZA with change gears.

Glue application machine with 2 rollers Mod. SC2R-1300 Year: 2006 Production: FIN s.r.l. Italy Main technical specification: Width of machining: 1300mm Maximum passage between rollers: 120 mm Diameter of rollers: 185mm Progress speed: 19m/min Net weight 390 kg Overall dimensions: 64 x 210 x 136cm Overall dimensions with case: 73 x 222 x 153cm 400 V, 50 Hz, 037 Kw Accurate and uniform application with any type of adhesive, excellent technical characteristics, For the high practicality, functionality and safety for the operator, set it at the at the top of the 2-roll glue application machines. Coating roller covered with acid-resistant rubber, ground and grooved, hard-wearing as they are Built with a rational layer of rubber, it is therefore possible to carry out 6-7 grinds. It is easy and quick to disassemble. Distribute, precisely and evenly on one or both sides ...

Unused Bosch Rexroth axial piston pump. See photos !

Unused Rexroth MCR5H565ZZ33A0M1L01SO533C hydraulic drive

P311 - used approx. 110 m³ / 110,000 L GF-UP tank, standing on stand frame or horizontal, with chemical protective layer. Technical details: Capacity: approx. 110 m³ / 110,000 litres Material: glass fibre reinforced plastic, GF-UP Manafacture: Reich-Tank Year of construction: 2005 DIBT bauaufsichtl. Approval: Z-40-11-117 Specific gravity: min. 1.06 kg/L Dimensions: Ø approx. 3.00 m × H total approx. 19.05 m Other: Used tank made of glass fibre reinforced plastic / GF-UP, with inner chemical protective layer, professionally cleaned and in good condition. Standing, above-ground storage container on stand frame, incl. ladder and roof platform, dome on the side of the tank and on top of the roof, several inlets and outlets. Former silo for the storage of biogas and 9% sulphuric acid, including container statics and expert opinion to prove suitability according to §19 g/h WH ...

3 to 5-Roll calender Buzuluk Number of rolls: 4 pcs. Roll diameter: 150 mm Roll length: 400 mm

Key data: 525 , 700 , 400

525 kW Tuthill Coppus condensing steam turbine RLHA24 from 1999 in good condition used for sale. Manufacturer: TUTHILL Coppus Model: RLHA 24 Type: Steam Condensation Serial Number: 99H5046 Performance mech. [kW]: 525 Pressure inlet [bar]: 16 Temperature inlet [°C] 350 Pressure outlet [bar]: 0,70 Year of construction: 1999 Weight [kg]: 5700 Dimensions LxWxH [cm]: - More information here: stromerzeuger-discount.de/angebote/dampfturbinen/tuthill-coppus-rlha24 /

Tie rod cylinders, hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder comes from: a Hitachi Seiki HC400 machining center -Piston: Ø approx. 35 mm -Piston rod: Ø 16 mm -Stroke: 440 mm -Dimensions: 44/44/H610 mm -Weight: 3.6 kg

Machine vice, stable vice, drill vice -Back width: 110 x 30 mm -Tension depth: max 132 mm -Tension: centric -Dimensions: 345/135/H95 mm -Weight: 11.7 kg

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Chuck size: Ø 250 mm -Throughout: Ø 80 mm -Weight: 19 kg

Thread cutting dies, replacement dies, thread cutting heads with chasers, thread cutting stock, thread cutting machine, pipe thread cutter -various: thread cutting sizes -Price: complete -Weight: 12 kg

- Eirich RV 19 granulation / mixing plant, mixer, feed hopper, riser plate completely refurbished. Incl. -Steel construction - Screw conveyors - Input silo approx. 30 m3 - Steep conveyor

Radial saw MAGH-OMGA RADIAL 700, engine hp 3 , reach 700mm Not to CE standards, for export

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Chuck size: Ø 200 mm -Passage: Ø 55 mm -Weight: 12 kg

Cooling capacity: 401 kw (7/12 - 45°C) Options: Split Year of manufacture: 2015 Heat exchanger: Plate Type of refrigerant: R134A Refrigerant circuit: 2 pcs. Compressors: 2 pcs. Trane (screw) Number of fans: 4 pcs. Working hours: 25318/24124 h. Dimensions: 3,7 x 1,3 x 2 m. + 2,4 x 3,8 x 2,9 m. Weight: 2 621 kg +1 000 kg Condition: Excellent

Recycling machine trade AGICOM-Pedergnana OG:The JMC 200 has a mechanically adjustable counter holder. The scissor head is operated with a foot pedal for single cuts or continuous cutting. The scissor head is protected with a safety cage. Overall dimensions: L 1100 x W 600 x H 1400 mm Total weight: approx. 550 kg Knife length: 203 mm Max. knife opening: 140 mm Cutting force: 52 tons Cutting capacity: round bar 38 mm diameter (ST 37) Main drive: 3 phases: 4 kW Cutting strokes p/min.: up to 20 / min

x-travel: 500 mm y-travel: 400 mm z-travel: 330 mm Control: FANUC 31i-B5 Tools changer: 14 pos. table-size: 850 x 410 mm number of spindle speeds: 24.000 U/min/rpm rapid traverse feeds: 48 m/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Agitator 0.37 KW 910 rpm and 4-leaf folding stirrer 50 / 150 mm for drums With crossbeam made of aluminum profiles 45 45 800 mm. Electric motor, 3 x 230/400 volts, 0.37 kW, IP55, 6 poles 910 rpm, With motor protection plug and shielded supply cable. Placed at an angle on truss. Stainless steel shaft D20, length 800 mm, diameter 20 mm, material 1.4571. With rigid coupling, bare, material stainless steel 1.4571 Impeller: Four-bladed folding stirrer, diameter 150 mm unfolded, 50 mm folded, for drums, material stainless steel 1.4571

ATTENTION : The system is currently in operation and can only be purchased AT the END of the year. This is only advertised now in order to find possible interested parties to date. for sale is the central extraction system of a medium-sized company. Extraction volume : 8,33m³/s > approx., 50,000m³/h Power : 37 kW In addition, there are: A fan that sucks in the air Type: DFDG SEE 225S4 Power : 37kW rpm : 1483 Power : 400/690 V Amperage : 65 / 37.5 A Frequency : 50 Hz Ingress protection : IP 55

I sell a heavy briquetting press RUF RB400. Year of construction 11/2012 Engine power 22kW Productivity Number 400 pcs. Wood briquettes / hour Wood briquette RUF 150 x 60 x 40-110mm (Depends on material) Material moisture up to 15% Nominal pressure 14200 N/cm2 Oil cooler included. Dimensions: 3000 x 1800 x 2000 mm Combined weight 3000kg Equipment on the right - right entrance box. Condition after full remont/500Mtstd warranty as new. Available right away. With full documentation and CE.

CCM turret bearing / Slewing bearing Drawing: 190.40.4140.000.41.1502 Dimensions / Dimensions: 4405 / 3886 x 222 mm

amount: 1 STK weight: 25 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.