r 37 k used for sale

Semitrailer tractor, manufacturer Renault Trucks, YOC 2005, Hbz. Premium, zul. total mass 18000 kg, Displacement in cm³ 10837, Diesel, 522'tkm, IR 2006

Specifications: - Grinding wheel diameter approx. 500 mm - Grinding wheel width approx. 50 mm - Grinding wheel bore approx. 127 mm - Disc speed 950 rpm - Drive 400 V / 3.3 kW - Working height approx. 800 mm - Working depth / protective depth adjustable - Connections for suction pipe 100 mm - Space requirement approx. W 1250 x H 1150 x D 650 mm - Weight approx. 350 kg

Rühle Tumbler MGR 400, with vacuum, container size 400 liters, filling max. 300 liters, intelligent touch PC control, direct cooling by powerful cooling unit, infinitely variable arm drive allows up to 25 revolutions per minute, feeding for loading and unloading

Deburring pipes, rods, profiles and sheets after separation is a must. But only the right system enables cost-effective, safe and flawless deburring – namely the optimal adaptation of the machine concept and the high-performance brush to the workpiece properties and material quality.

technical details of the dressing planer: - Planing width: 310 mm - Total length of the planing tables: 1,400 mm - Diameter of the knife block: 70 mm - TERSA planing knife shaft - Number of knives: 3 - Knife dimensions: 310 x 25 x 3 mm - Rotation speed of the knife shaft: 5,500 rpm - Dimensions of the dressing stop: 1,300 x 150 mm - Swivel range of the dressing stop: 90° - 45° - Maximum cutting depth: 4 mm technical details of the thickness planer: - Dimensions of the thickness planer table: 430 x 310 mm - Capacity height of the thickness planer: 230 mm - Diameter of feed rollers: 30 mm - Maximum cutting depth: 4 mm - Feed speed: 6m/min - Handwheel with analog display for height adjustment - Diameter connection dust extraction: 100 mm - Weight: 280 kg Engine data: - Voltage: 400 V - Engine power: 3.72 kW / 5 hp Transport dimensions (W x D x H): 1,590 x 85 ...

Multi-stand drill Prior sale reserved - errors possible Internal Reference Number: D-1143-1

Agitator 0.12 KW with used gear motor Bauer 27 rpm and 2-wing Inclined blade stirrer 244 mm With traverse made of aluminum profiles 45 45 mm. Gear motor: Used gear motor Bauer, 3 x 230/400 volts, 0.12 kW, n1 = 1350 rpm, n2 = 27 rpm, M2 = 24.5 Nm, IP 54, weight approx. 8 kg. With motor protection plug. Shaft: precision stainless steel shaft D14, length 500 mm, diameter 14 mm, Material stainless steel 1.4301. With rigid coupling made of stainless steel 1.4571 Very slow-running, high-torque agitator for use in attachment tanks or cooking kettles.

Agitator 0.12 KW with gear motor SEVA 89 rpm and 2-wing Inclined blade stirrer 244 mm With traverse made of aluminum profiles 45 45 mm. Gear motor: worm gear motor SEVA, 3 x 230/400 Volt, 0.18 kW, n1 = 1340 rpm, n2 = 89 rpm (i = 15), IP 55, weight approx. 8 kg. With motor protection plug. Shaft: precision stainless steel shaft D20, length 1000 mm, diameter 20 mm, Material stainless steel 1.4571. With rigid coupling made of stainless steel 1.4571

Agitator 0.12 KW with gear motor Bauer and 2-wing Inclined blade stirrer 244 mm With traverse made of aluminum profiles 45 45 mm. Gear motor: Bauer worm gear motor, 3 x 230/400 volts, 0.12 kW, n1 = 2700 rpm, n2 = 180 rpm (i= 15), IP 55, weight approx. 8 kg. With motor protection plug. Shaft: precision stainless steel shaft D20, length 1000 mm, diameter 20 mm, Material stainless steel 1.4571. With rigid coupling made of stainless steel 1.4571 Very slow-running, high-torque agitator for use in attachment tanks or cooking kettles.

Good working conditions

Biopsy device for removal of tissue during mammography As good as new. - Mammography

Machine Details Warehouse number 1105-03578 Machine Type Machining Center - Vertical StAMA ROBODRILL brand Type MC 010 Year of construction 1990 Control type CNC Storage location HAGUENAU Country of origin JAPAN Delivery time IMMEDIATELY Freight base from stock Technical details x-travel 500 mm y-travel 380 mm z-travel 300 mm Spindle holder ISO 30 sk sa Clamping surface 650 x 380 mm Tool magazine with 10 seats Tool change time 5 sec workpiece weight 200 kg Speeds - autom. switchable 60 - 8000 rpm Feed speed 1 - 4095 mm/min Feed force 400 kp (X, Y) Feed force 1000 kp (Z) Rapid traverse speed 36 m/min (X, Y) Rapid traverse speed 30 m/min (Z) Information Equipped with/ Equipped with: - FANUC 0 M Control - 10-fold tool changer SK 30 - Coolant system / cooling attachment - 4 T-slots / 4 T-slots TOOLS SK 30

0: 4000,5000 mm Working height: 120 mm 0: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 3.700mm, 5.100mm, 6.100mm mm Working height: 160 mm 0: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 3.700mm, 5.100mm, 6.100mm mm Working height: 160 mm 0: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

REF-2034 RISCO CONTINUOUS VACUUM SAUSAGE STUFFER Continuous vacuum sausage filling machine Manufacturer: RISCO Model: RS-4003-320SC Year: 1998 Power: 4.5kW Voltage: 400V. 50Hz. Three-phase Weight: 560kg Overall dimensions: 1,000mm width, 800mm length, 1,970mm height

Shell sealer Rühle VR1, built in 2005, in a good used and functional condition. Metal parts made of stainless steel. Packaging machine / tray sealer with scale and label printer, weighs, packs and labels the goods in a single operation. PC control. Supplied with two mould inserts. Machine is prepared for fumigation. Machine is rollable. Dimensions W/D/H 60/70/170 cm. Power ratings 230 Volt, 1,5 kW. Workshop tested, immediately ready for use. More on request.

I sell radius copy milling unit for edges suitable for CNC machining center machines with edge banding HOMAG, WEEKE, BIESSE, SCM, MORBIDELLI, HOLZ-HER, IMA, FELDER, MASTERWOOD, BUSELLATO, etc. n 12,000 rpm. Radius R2mm. HSK63 posture. Available the same.

This Hettich centrifuge was used in a school for milk processing.

Backflow preventer, Check valve, Reto Stop, DN 250, PN10, VAG, new -20% Special price ! We still have several identical and other such devices, but the quantity is ending. Buy more than 1 piece there is still a great discount. The current new price of a similar product is € 3,022 excl. If you have a UID number, we will gladly issue an invoice without VAT. As good as new in original packaging! Manufacturer date 2018 The part was purchased from a spare parts warehouse of a company and has never been in operation, is completely as new and in the original packaging. Soft-seated slanted check valve opens already at small differential pressures. Valve disc can be used on both sides, therefore double service life of the valve disc. The one-piece and all-around EPDM rubberized disc allows a completely free passage and reduces the adhesion of impurities. Suitable for both horizonta ...

1300 X 1400

STOCK BLENDER

750 x 750 Vulcanization Press

Make: RIJVA Model: 502/1 S/N: 405 Cap: 12 tons

660 x 2130 Bolling Dough Mixing Machine

From business abandonment: We are selling a CNC portal milling machine with a working area of 3200 x 1510 x 300 mm It is used, but is well maintained and runs well. It was used to mill sheet material. Very good e.g. for wood, façade panels or Eternit cuts. It has 3 axes with rack and pinion drive Spindle: Air Cooled HF Spindle ES915 3.8KW S1 4.6KW S6 60% Ceramic/Steel Bearing With ISO30 collets (we supply with) ATC from HSD with Automatic Tool Changer (Air Driven) TOP: A complete replacement spindle is also included, freshly serviced with new bearings! The controller is an eding control on Windows PC, PC is included. A conversion of the Y-axis to 2 x12 Nm closed-loop stepper motor with very precise German Wittenstein gearboxes took place 5 years ago. X-axis runs with 9 NM stepper motor, Z axis too, also has a brake built in to hold the axle. Important and outsta ...

pressure: 200 t distance between columns: 1600 mm max. ram stroke: 600 mm dayligth: 900 mm table width: 1600 mm table depth: 1300 mm table height: 1060 mm ram surface: 1600 x 1300 mm T-slots: Din 650 / 22H12 rapid traverse: 400 mm/s return speed: 325 mm/s pressing speed: 42 mm/s bei 40% mm/sec pressing speed: 20 mm/s bei 100% mm/sec die-cushion pressure: 800 kN die cushion stroke: 150 mm speed of die cushion: auf 68/ ab 225 mm/s The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TO WHOM IT MAY CONCERN; WE VE NEW UNUSED GENUINE CYLINDER LINERS OF BERGEN B 32:40 A AT OUR STOCK PART NO IS 102001 WE VE 2 PCS AT OUR STOCK. EX STOCK IZMIR TURKEY ADDITIONALLY WE VE MANY MANY OTHER MAJOR PARTS OF THIS TYPE ENGINE BERGEN B 32:40 A AT OUR STOCK PLS REFER LIST ON ATACHE IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba With Kind Regards ;

Hettich Rotina 35 R Refrigerated Centrifuge Large, easy-to-read display During the run, the actual state of all parameters is displayed. RPM RPM: Input in steps of 10. Relative Centrifugal Acceleration RCF: Input in steps of 10. Switching function RPM/RCF: By entering radius r/mm Calculate and display the speed or RCF. Time: Input in minutes and seconds, max. 99 min., 59 sec. Temperature: Input in steps of 1 from -20°C to +40°C Speed: n= 15,000 min-1 / RCF 24,400 Temperature in the spin chamber: infinitely variable from -20°C to +40°C 1-99 min, ∞ (continuous run), IMPULSE button (for short runs in seconds) Dimensions (HxWxD): 380 x 468 x 695 mm Voltage: 208-240 V Weight approx: 70 kg incl. rotor 1717 / 10x60g / 5000 RPM Item condition: used Scope of delivery: as pictured More items - new and used - can be found in our shop! International shipping cos ...

turning diameter: 420 mm turning length: 1000 mm control: Fanuc 10 T Monforts Control F spindle passage: 65 mm turning speeds: 4000 U/min chip conveyor: Tool turret 12 positions: total power requirement: 22 kW weight of the machine ca.: 4 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MEGAPLOT OF1515 Roof Master EPS cutting machine was built in 2019 in Poland by Megaplot J.Wójcicki M.Jagła SJ. The machine represents the MEGAPLOT Open Frame series, which has been specially designed for the efficient production of any type of slope roof plates made of polystyrene. The machining process is performed by means of hot wires mounted on two independently moving arms. Intuitive operation of the machine is ensured by the proprietary MegaRoofer software, which allows for simple preparation of machining projects. All you need to do is enter a few necessary parameters and the programme will automatically generate a ready-to-cut project. The MEGAPLOT OF1515 hot wire cutting machine is offered with a wide range of equipment, including a barcode scanner and rotary table. Technical specifications of the MEGAPLOT OF1515 Roof Master polystyrene cutting machine - work area (L x W x ...

Electric heating: 28 KW Adjustable air circulation Pneumatically controlled fresh air, exhaust air, and smoke damper Cleaning: foam cleaning Smoke feeding: on customer request Smoking material: wood chips Without the after-burning system Installation dimensions of the machine in cm: Width: 150 Length: 145 Height: 275 Trolley dimensions in cm: 100100200 height Delivery time: 30 working days after advanced payment

Thickness planers Back to overview - Print version WEIBERT WY-D41 Thickness planer WEIBERT WJ-D41 NEW MACHINE! 400V 4 KW (5,5 HP) n=4500 min Planing width of 406mm Planing shaft diameter 100mm Max.4mm Chip Removal 4-reversible blade shaft Passage height of 4-225mm Feed speed of 6 and 12m/min.with own engine 1.1 KW (1.5 hp) Suction connection of 120mm Machine weight of 370 kg Machine tables Planing shaft bearing block and table guide made of GREY CAST IRON Manual height adjustment with handwheel 2 rolls in the thickness table G&WJ-D41 relka 22 Request information material WEIBERT WY-D53 Thickness planer WEIBERT WJ-D53 NEW MACHINE! 400V 5.5 KW (7.5 HP) n=5000min Planing width of 530mm max.chip removal of 8mm Planing shaft D=125mm 4-reversible blade shaft Passage height of 3-300mm Feed speed of 8 and 16 m/min. Engine for feed 1.5 KW (2 hp) Sucti ...

Broyeur Piovan type RN2030 Année 2000 en bon état 400 V - 50 HZ Puissance : 5,5 KW Poids : 490 KG

Filter capacity: 121 m² Air consumption: 13200 m³/h ventilator: 15 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. tool diameter: 400 mm : 180 mm operating pressure: 2 bar ROTATHERM chamber washing systems are used in all areas of industry and Craftsmanship for cost-effective cleaning of a wide variety of items to be cleaned and materials used. The parts are cleaned like in a dishwasher. Inserted into one Wire mesh basket they are in the closed device with a hot Lye shower washed from all sides. The machine will be selected after the Temperature and washing time set in operation. A centrifugal pump promotes the Washing water circulates to the nozzle system, which at the same time moves the basket in offset rotation. (Optional electric basket drive) After the cleaning process is complete, the device switches off automatically. the Parts can also be removed beforehand. In this case, when lifting the the pump is automatically put out of operation. ROTATHERM chamber washing systems are available in  ...

Air-Operated Double-Acting High Pressure Pump The Resato P200-100-2 is an air-powered, double-acting high-pressure pump used for the pressure generation of liquids in various industrial applications such as hydrostatic testing and chemical injection. The Resato P200-100-2 pump works on the principle of an automatic reciprocating differential piston to convert compressed air into high-pressure fluid flow. Manufacturer: Resato Type: P200-100-2/U/V Type: Air-Operated, Double-Acting High Pressure Pump Air piston diameter: 200 mm Gear Ratio: 100 Flow rate:6.6 l/min Weight: 21 kg Year 2019 Max. outlet pressure Controlled by the air supply pressure, at 7 bar (100 psi) air pressure, the static final pressure is up to 700 bar (~10,000 psi) (based on the Resato type chart for P200-100-1/P200-100-2). Compatible media Suitable for water, oil or an emulsion of both. Can also b ...