r 37 k used for sale

Controls:KUKA KRC 4 WORKING RANGE -ROBOT-:. - capacity:120 kg - Reach:2896 mm - Number of controlled axes:6 ELECTRICAL SPECIFICATIONS:. - mains voltage:380 V - mains frequency:50 Hz DIMENSIONS / WEIGHTS:. - total weight approx.:1084 kg

Controls:KUKA KRC 4 WORKING RANGE -ROBOT-:. - capacity:120 kg - Reach:2896 mm - Number of controlled axes:6 ELECTRICAL SPECIFICATIONS:. - mains voltage:380 V - mains frequency:50 Hz DIMENSIONS / WEIGHTS:. - total weight approx.:1084 kg

KAWASAKI RA006L robotic welding station is used for precision welding of workpieces using the MIG/MAG method. The station, equipped with two independent welding tables, is protected from the inside with SICK safety curtains and from the outside with double doors with safety locks. Next to each door is a control panel, with a safety switch and other necessary buttons. The welding station is complete and consists of the following parts: – robot arm: KAWASAKI RA06L – controller: KAWASAKI E controller E40 – MIG/MAG welder: KEMPPI KempArc SYN 300 – wire feeder: KEMPPI KempArc DT400 – manual welding table 2×1 m (2 pcs.) – safety curtains: SICK – cooling device: KEMPPI KempCool 10 – cleaning station: ABICOR BINZEL BRS-CC – KEMPPI and ABRICOR BINZEL welding accessories – anti-blinding shields – inductive sensors: SICK – door bolts and stops: SICK – cont ...

Raystat / Krebser Swivel Bracket US-Uni with - Generator CPI CMP 200 DR - Tube RAD 14 Fa. Varian 0.6/1.2 - Mobile patient couch • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg, Germany. • You buy the system in "IST" condition from the warehouse Freiberg (EXW), Saxony, Germany, and prepayment. • The sale is made as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite being fully functional without warranty. • The installation, commissioning and configuration of the system or plant components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer! • The offer is subject to prior sale.

Rok produkcji: 2021 Numer seryjny: 585348 Model: KUKA KR 160 R1570 nano / FLR Osie: 6 Udźwig: 160 kg Zasięg: 1570 mm Powtarzalność: ±0.06 mm Waga: 702 kg Sterownik: KUKA KRC4

number of controlled axis: 6 workpiece weight: 120 kg throat: 3096 mm Control: Kuka total power requirement: - kW weight of the machine ca.: 1,2 t dimensions of the machine ca.: - m Industrial robot with deburring unit - Robot control: Type: VKR C4 - ESTA small dust extractor OM-8 - Teach panel with connection cable (visible in the control cabinet) - External electrical/control cabinet installation with Ethernet and safety connections (typical for KUKA) - Mounted additional attachment on robot flange, for grinding & deburring application - Base for stationary floor mounting - Control & power cables already assembled and integrated The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Three old metalworking an tooling machines are available. 1) Milling machine Klopp FWU 13/6, year of manufacture: 1970, table length: 1905mm, machine dimensions with extended table: 2805mm/2000mm/1660mm, weight: approx. 2200kg. Without vice, with defective display. 2) Precision flat grinding machine Georg Müller MPS2, year of manufacture: 1971. 3) Plate shear Reinhardt RAS 52.80, year of manufacture: 1971, working width: 1540mm, power: 5.5PS, max. sheet thickness: 2mm, table height: 750mm, machine dimensions X/Y: approx. 2150mm/2020mm, weight: approx. 860kg. The mechanical lifting unit of the machine is defective. Documentation available. On-site inspection is possible. Individual sale possible.

Used bread roll line KÖNIG, type: Combiline - Head machine KÖNIG Basic Rex - 5 rows - Long rolling station - Pre-proofer - Punching station - Settlement on sheet metal - Weight range: approx. 40 - 120 g - Output: maximum approx. 5,000 pcs./h The plant is still in operation and can be visited. We will be happy to send you further photos and technical data on request.

4-rolls Kramatorsk plate bending machine Ultimate tensile strength of material: 500 MPa (50 kg/mm²) Yield strength – cold bending: 250 MPa (25 kg/mm²) Yield strength – hot bending (primary): 100 MPa (10 kg/mm²) Yield strength – hot forming (secondary heating): 45 MPa (4.5 kg/mm²) Elongation at cold state: ±18% Maximum sheet width: 4000 mm Max sheet thickness – cold, without pre-bend: 71 mm Max sheet thickness – cold, with pre-bending: 63 mm Max sheet thickness – hot forming: 150 mm Minimum bending radius – cold: 560 mm Minimum bending radius – hot: 600 mm Maximum radius for closed bending (curled edge): 1000 mm Main motor: 160 kW Weight: 730 tons

Working width: 2000 mm Roller width: 2200 mm pressure: 50 t Pressure line: 230 N / mm Number of rollers: 3 Stück Upper roll: 280 dia Roller covering: Stahl, verchromt Heating - upper roll: Thermoöl Middle roll: NIPCO-Walze , 500 mm dia Roller covering: Polyamidmantel Lower roll: Stahl dia diameter of lower rolls: 280 mm Roller covering: Schreiner-Gravur Clouth speed: max.100 m/min Weight: 26 to dimensions of the machine ca.: 6,0 x 8,0 x 3,3 m 3-roll calender with 2 steel rolls, upper steel roll smooth - chrome-plated, lower steel roll with carpenter engraving, heating with thermal oil (via heat exchanger), middle roll as NIPCO roll, this can be rotated by 180°, for use in the upper or lower roll nip, infeed with working platform, triple profile spreader holders + metal detector E&L, outfeed with hydraulic MENZEL Sochor winder, The data for this ad was created with ModulMWS - the sof ...

Used head machine KÖNIG, type: Mini Rex Futura AB -in good bakery condition- - Head machine / dough divider: KÖNIG Mini Rex Futura AB - Knitting roller: SKG54 and RKG58 for round and square dough pieces - 2 rows - Weight range: 25 - 75 g for round - Weight range: 40 - 85 g for square ones - Capacity: max. 2,000 pcs./h - Band very good condition - Condition: Very good, ready to use Suitable for wheat and rye doughs (up to 40% rye content). Visits and test runs are possible by arrangement.

HAVE A GDY SIR; WE VE 1 PC NEW ( OPEN BOX ) RCU 502 KONGSBERG REMOTE CONTROLLER. UNIT AT STOCK REV 2.0.2. F W 1.0.7.3 WE VE 1 PC NEW ( OPEN BOX ) UNUSED RMP 420S KONGSBERG REMOTE MULTIPURPOSE INPUT /OUTPUT UNIT AT STOCK IF YOU VE ANY QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E-mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY

Height=2 m, Overall length= 0.9 m, Overall width= 0.7 m,

Kuka robot KRC2sr + KCP2 + KR5 sixx R850 Number of axes: 6 Max. load capacity: 5 kg Max. intervention: 850 mm Year of Make: 2006 Scope of delivery: robot, controller, cable, teaching panel, operating instructions, circuit diagrams. Shipping costs within Germany 95€.

Used roll line KEMPER, type: Quadro Round -in bakery condition- For square, round and long-rolled rolls. - KEMPER Relaxer - WP KEMPER Quadro Round with 5 rows - With SIEMENS Simatic Touch control - Relaxation band - Long scooters and wrapping - Deduction AB 800-1000 - Sprinkling device - Including many different cutting rollers and warp knitting drums Weight range round: 40 - 150 g Weight range square: 40 - 150 g round rolls: max. 7,000 pcs./h Square rolls: max. 10,000 pieces/h Visits and test runs are possible by arrangement.

Rok produkcji: 2012 Udźwig: 240 kg Zasięg roboczy: 2900 mm Powtarzalność: ±0.06 mm Liczba osi: 6 Waga: 1077 kg Zakresy ruchu osi: A1: ±185° A2: +35° / −155° A3: +155° / −130° A4: ±350° A5: ±122.5° A6: ±350° Maksymalne prędkości osi: A1: 100°/s A2: 90°/s A3: 90°/s A4: 150°/s A5: 120°/s A6: 190°/s Control: KUKA KRC4

Used head machine / dough divider KÖNIG, Type: Rex Industrie II - I-Rex 8 / 6 / 5 rows - Own integrated control system for individual operation - Weight range: up to 110 g Visits and test runs are possible by arrangement.

Compact bread roll line KÖNIG, type: GS 2000 For Kaiser rolls, long rolls, hot dog buns, normal round buns and flattened ones for hamburger buns. - Mini Rex 4000-S head machine - Weight range: 30 - 135 g - Knitting drums: SK58 and AK70 - Weight range: approx. 30 - 135 g - Capacity head machine: max. 4,000 pcs./h - Proofer capacity: max. 2,500 pcs./h - Condition: Good, well-maintained and technically tested by us - Ready for immediate use Visits and test runs are possible by arrangement.

König Brötchenanlage composed of: Dough dividing and rounding machine type REX Classic T6S Pre-proofer type ECO TWIN 800 with cutting station with Stüpfler (Kaiser) with lateral pretzel discharge Deduction - Bakery condition not cleaned - partially. in need of overhaul

General SKU300P658 LocationBarneveld MakeKEK Kemutec Products limited (UK) No.69477MOSO6682A Year of construction1990 Main Features MaterialMild steel/Stainless steel Motor2.2 KW Length600 mm Specified Features - Rotating sieve Rotating sievegrater Sieve sizesdia.250mm x600mm Screw sizesdia.140mm Inletdia.160mm Outletdia.300 With inspection hatch400x230mm Motor2,2 KW, 220/380 Volt Air purged glandscheck MaterialMild steel, Stainless steel Information Mounted on stainl. st. framecheck With switchgearcheck Floor space2,0x1,4 M Total height1,6 M Extra SpecificationsHousing in mildsteel Technical specs Extra informationScrew sizes: dia. 140 mmRotating sievesKek KemutecSieves > Rotating sievesBrand > Kek Kemutec What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide ...

General SKU340S1047 LocationBarneveld MakeKEK Kemutec (UK) TypeK 300 No.A01044-1 Year of construction2001 Main Features MaterialStainless steel Motor0.55 KW Length300 mm Specified Features - Rotating sieve Rotating sievecheck Sieve sizesdia. 110x300mm Screw sizesdia. 90x250mm Inletdia. 95mm Outletdia. 50mm (2x) With inspection hatch215x180mm Motor0.55 kW 240/415 volt Air purged glandscheck With sieve cagecheck Sieve perforation3x3mm MaterialStainless steel Information Total height0,7 M Weight120 Kg Floor space1,2x0,3 MRotating sievesKek KemutecSieves > Rotating sievesBrand > Kek Kemutec What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machine ...

General SKU340S623 LocationBarneveld MakeKEK Kemutec TypeK 300 C No.A 16205 /2 Year of construction2003 Main Features MaterialStainless steel Motor0.55 KW Length300 mm Specified Features - Rotating sieve Rotating sievecheck Sieve sizesdia. 120x300mm Screw sizesdia. 90x200mm Inletdia. 60mm Outletdia 50mm (2x) Motor0,55 kW 380-420 volt With sieve cagecheck Sieve perforation5x5mm MaterialStainless steel Information Floor space1,2x0,4 M Total height0,8 M Weight150 KgRotating sievesKek KemutecSieves > Rotating sievesBrand > Kek Kemutec What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU412W1294 LocationBarneveld MakeKarl Merz TypeLWBP 2-2 No.29192 Year of construction1989 Specified Features - Roll breaker MaterialStainless steel 1.4552 Pin roll breakercheck Double shaftcheck Teeth height0,5 mm Roll sizesDia. 170x200 mm With hopper250x180x450 mm Inlet200x60 mm OutletDia. 190 mm Motor2x 1,5 kW, 220/380 volt, 1420 rpm With variable speed drivecheck Roll speed10-50 rpm Feeding by vibro feedercheck Motor230 volt, 3000 rpm Information Mounted on legscheck With switchcheck Weight890 kg Floorspace0,80x1,45 m Total height1,90 mRoll breakersKarl MerzBreakers > Roll breakersBrand > Karl Merz What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneve ...

General SKU412W1296 LocationBarneveld MakeKek TypeK400 No.AO3817 Year of construction2001 Main Features MaterialStainless steel Motor1.5 KW Length400 mm Specified Features - Rotating sieve Rotating sievecheck Sieve sizesDia. 180x600 mm Screw sizesDia. 150x200 mm InletDia. 130 mm OutletDia. 180 mm With inspection hatch400x230 mm Motor1,5 kW, 380 volt, 1420 rpm Speed750 rpm Air purged glandscheck With sieve cagecheck Sieve perforation0,5 mm MaterialStainless steel 1.4408 Information Mounted on mild steel framecheck Mounted on wheelscheck With switchcheck Weight160 kg Floor space1,10x1,70 m Total height1,50 mRotating sievesKekSieves > Rotating sievesBrand > Kek What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in B ...

General SKU335X738 LocationBarneveld MakeNorbert Karasek Type160 Ltr. No.2626 Year of construction2002 Pressure Working pressure4 Bar Vacuum possiblecheck Working pressure jacket4 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume120 Ltr. Motor0.25 KW Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4435 (316L) Stainless Steel Reactors Reactorcheck Capacity160 l. (120 l.) Vessel sizesDia. 600x1250 mm Dished bottomcheck Top connectionscheck OutletDia. 75 mm, with valve With jacketcheck volume 12 l. Max. temperature145°C With propellor stirrercheck Motor± 0,25kW (type plate missing) Speed mixing shaft227 rpm Information Total height2,60 m Weight384 kg CEcheck Floorspace0,60x0,60 mStainless Steel ReactorsNorbert Karasek GmbH GloggnitzReactors > Stainless Steel ReactorsBrand > Norbert Karasek GmbH Gloggnitz  ...

Used bread roll line KÖNIG, type: G2000 with Mini Rex Futura -In bakery condition- Compact bread roll line - Mini Rex Futura-S head machine - Can also be rotated to look only round and take off directly - Proofing time approx. 6 minutes at maximum output - With side discharge belt single-row - With tools for emperors - Condition: good, everything checked - Machine is still being cleaned The roll line is in good condition and is ready for immediate use. Viewing and test run are possible at any time by arrangement.

We sell from stock Rexnord Conveyor Chain 10 FT 1874 SS K 363 GJ

KUKA KR 8 R2100-2 arc HW robotic welding station was built in 2021 in Germany by KUKA Deutschland GmbH. The system is designed for precision welding of workpieces with even the most complex geometry. All the necessary components are integrated inside the modular design, enabling the workstation to be adapted accordingly to current production needs. The workpiece welding process is performed by a KUKA 6-axis robot from the KR CYBERTECH ARC series. The machine is distinguished by its compact design, which provides a high degree of movement freedom even in hard-to-reach places. To avoid any collision of cables with other station components, they were routed inside the robot arm. All this is complemented by an easy-to-use controller with a range of additional functions. During automated welding, dynamic and accurate feeding of the welding wire is very important. To achieve this, a reli ...

General SKU356W957 MakeAmandus Kahl TypeVWR251 No.10880 Year of construction1991 LocationBarneveld Specified Features - Roll breaker MaterialMild steel Roll breakercheck Double shaftcheck Roll sizesDia. 250x1000 Fluted rollscheck Inlet1220x130 mm Outlet1300x530 mm Motor37kW, 380/660V, 975 rpm Roll speed±350 rpm Feeding by vibro feedercheck Information Floorspace2,5x1,0 m Total height1,8 m Weight3140 kgRoll breakersAmandus Kahl HamburgBreakers > Roll breakersBrand > Amandus Kahl Hamburg What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Manufacturer: Kuka Model: KR 120 R2700-2 Year of Manufacture: 2022 Weight: 120 kg Reach: 2701 mm Installation: Floor mounted Remarks: Robot disassembled from PIM - milling automation, including pedestal and grippers with assembly flanges Find more here - / Contact us at -

This KUKA KR 6 R700 sixx robot arm was manufactured in 2018. It features a maximum load capacity of 6 kg and a reach of 706 mm, complemented by a KPC4 smallsize robot controller. Consider the opportunity to buy this KUKA KR 6 R700 sixx robot arm. Contact us for more information.

This KUKA KR270 R2700 C ultra MED robot arm was manufactured in 2015. Ideal for precise automation tasks, it offers robust performance and reliability. Contact us for more information.

This KUKA KR 90 R3700 prime K robot arm was manufactured in 2018. Ideal for automation tasks, it offers flexibility and precision for various industrial applications. Consider the opportunity to buy this KUKA KR 90 R3700 prime K robot arm. Contact us for more information.

This KUKA KR120 R3200 PA was manufactured in 2014. It features a software version V8.3.11 and has approximately 21,000 operating hours. It includes a Smartpad KCP, weighs 1075 KG, and can handle loads up to 120 KG with a range of 3195 mm. Contact us for more information about this machine.

This 6-axis KUKA KR 90 R3100 extra C-F-HP was manufactured in 2016, featuring a load capacity of 90 kg and a reach of 3100 mm. It includes the KRC 4 controller, enhancing its operational flexibility. Consider the opportunity to buy this KUKA KR 90 R3100 extra C-F-HP robot arm. Contact us for more information about this machine.

This 6-axis KUKA KR 6 R900 fivve was manufactured in 2014, featuring a maximum reach of 901.5 mm and a payload capacity of 6 kg. It operates efficiently with a cycle time of 155 cycles per minute and has been used for 18000 hours. Ideal for tasks requiring precision and speed in challenging environments, it maintains a protection rating of IP54. If you are looking to get high-quality robotic arm capabilities, consider the KUKA KR 6 R900 fivve machine we have for sale. Contact us for more information.

This 3-axis KUKA KR8 R2100-2 arc HW was manufactured in 2019. Ideal for precise and efficient automation tasks, this welding robot is a robust option for industries requiring high reliability and performance. Consider the opportunity to buy this KUKA KR8 R2100-2 arc HW welding robot. Contact us for more information.

This KUKA KR-90 R3100 was manufactured in 2016. It includes a floor bracket, control, and an ENGEL CC300 control cabinet – easix. With 3871 operational hours, it has been maintained by Engel. Dimensions for the robot are 2100 x 1000 x 2150mm, and the control cabinet measures 800 x 600 x 1300mm. It weighs 1092 Kg and can handle loads up to 90 Kg with a range of 3096 mm. Contact us for more information about this machine.

This 6-axis KUKA KR 6 R1820 Robot was manufactured in 2019. It excels with a maximum reach of 1820 mm and a rated payload of 6 kg. Versatile mounting options include ceiling, floor, wall, and desired angle. Both the robot and in-line wrist are protected with an IP54 rating. Ideal for tasks requiring flexibility and precision. For the KUKA KR 6 R1820 machine we have for sale, reach out for more information.

This 6-axis KUKA KR 10 R1440-2 robot arm manufactured in 2023 features a payload capacity of 10 Kg and a range of 1440 mm. It includes a KUKA KRC4 compact control cabinet, smartPAD teaching pendant, and various interfaces for enhanced functionality. Ideal for tasks requiring precision and flexibility. If you are looking to get high-quality robotic capabilities, consider the KUKA KR 10 R1440-2 machine we have for sale. Contact us for more information about this machine.

General SKU335X739 MakeNorbert Karasek LocationBarneveld CEcheck TypeTank 1500 L Pressure Working pressure4 Bar Vacuum possiblecheck Working pressure jacket4 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume1500 Ltr. Motor2.2 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity1500 Ltr. (max. 1678 Ltr.) Vessel sizesø 1200 x 1707 Dished bottomcheck Top connectionscheck Outletcheck 2x DN25 (with valve) With jacketcheck (101 Ltr.) Max. temperature145 °C Motor2.2kW, 230/400V, 1410rpm Speed mixing shaft86 rpm Stainless Steel Reactors MaterialStainless steel 1.4435 (316L) Information No.2639 Year of construction2002 Mounted on legscheck Floorspace1,30 x 1,30 m Total height3,0 m Weight1394 kg Extra SpecificationsComes with 2 sieve CarriersStainless Steel ReactorsNorbert Karasek GmbH GloggnitzReactors > Stainless S ...

Type: KR 360 R2830 Wersja: KR360R2830 C4 FLR / FLOOR Sterownik: KR C4 Udźwig: 360 kg Zasięg: 2826 mm Waga robota: 2385 kg Rok produkcji: 2017 Serial No. (robot): 402267 Rok produkcji sterownika: 2017 Serial No. (KR C4): 331300

General SKU340S629 LocationBarneveld MakeKEK Kemutec TypeK300 Main Features MaterialStainless steel Motor0.55 KW Length300 mm Specified Features - Rotating sieve Rotating sievecheck Screw sizesdia. 90x200mm Inletdia. 60mm Outletdia. 50mm (2x) With inspection hatch225x125mm Motor0,55 kW 380-420 Volt With sieve cagecheck Sieve perforation5x5mm MaterialStainless steel Information Year of constructionunknown, manufacturer plate is missing Floor space1,2x0,4 M Total height0,8 M Weight120 KgRotating sievesKek KemutecSieves > Rotating sievesBrand > Kek Kemutec What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU018C047 MakeKomen + Kuin Year of constructionUnknown machine plate is missing LocationBarneveld Main Features MaterialStainless steel Motor0.55 KW Specified Features - Rotating sieve MaterialStainless steel Rotating sievecheck Rotating sieve for liquidscheck Pulping machinecheck With inspection hatchcheck Motor0.55 kW 220/380 Volt With sieve cagecheck Sieve perforationØ 2 mm Information Floor space1,4x1,3 M Total height2,2 M Weight320 KgRotating sievesKomen + KuinSieves > Rotating sievesBrand > Komen + Kuin What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU340S627 LocationBarneveld MakeKEK Kemutec TypeK300 Main Features MaterialStainless steel Motor0.55 KW Length300 mm Specified Features - Rotating sieve Rotating sievecheck Screw sizesdia. 90x200mm Inletdia. 60mm Outletdia. 50mm (2x) With inspection hatch225x125mm Motor0,55 kW 380-420 Volt With sieve cagecheck Sieve perforation5x5mm MaterialStainless steel Information Year of constructionunknown manufacturer plate is missing Floor space1,2x0,4 M Total height0,8 M Weight150 KgRotating sievesKek KemutecSieves > Rotating sievesBrand > Kek Kemutec What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU340S625 LocationBarneveld MakeKEK Kemutec TypeK300 No.B41554/1 Main Features MaterialStainless steel Motor0.55 KW Length300 mm Specified Features - Rotating sieve MaterialStainless steel Rotating sievecheck Sieve sizesdia. 120x300mm Screw sizesdia. 90x200mm Inletdia. 45mm Outletdia. 50mm (2x) With inspection hatch215x180mm Motor0.55 kW 230/380-415 Volt Speed950 rpm With sieve cagecheck Sieve perforation5x5mm Information Year of construction2008 Floor space1,2x0,4 M Total height0,8 M Weight100 KgRotating sievesKek KemutecSieves > Rotating sievesBrand > Kek Kemutec What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Load capacity: 80kg, horizontal/vertical reach: 2100mm/3300mm, repeatability: +/-0.07mm, weight: approx. 540kg. Documentation available. An on-site inspection is possible.

A four-roll plate bending machine Kramer is available. Working width: 2000mm, max. plate thickness: 3mm, power: 3kW. An on-site inspection is possible.

Robot KUKA KR3 R540 sixx KRC4 complete profinet only 582 hours Year of manufacture: 47/2016 Number of axes: 6 Max. load capacity: 3 kg Max. working range: approx. 540 mm Scope of delivery: robot, controller, cable, teach panel 2 weeks commissioning warranty. No further warranty In addition, spare parts are always available from stock. The robot is fully functional and can be visited. Freely loaded / ex works. Shipping costs abroad on request. Please enter your country, city and zip code.

Gear motor, electric motor, electric gear motor, worm gear motor, parallel shaft gear motor -Manufacturer: SEW-Eurodrive, gearmotor with integrated frequency inverter with brake -Square gear unit: F series -Type: FH67BDT71D4/BMG/MM03/RA1A/KPF6 -Speed: 1.2-6.1 rpm -Power: 0.075/0.37 kW -Protection class: IP54 -Hollow shaft: Ø 40 x 210 mm -Brake: 5 Nm -Number: 4x motor available -Price: per piece -Dimensions: 425/280/H330 mm -Weight: 44 kg/piece