r 37 k used for sale

Table 1750 x 920 mm, fixed stroke 101 mm, see pictures and description,; All right

see picture - on Anfr. More: Tornos M 7

INDRAMAT Spindle Drive Module RAC3.1-150-460-A00-W1-220 Bosch Rexroth

Machine for stripping cables - see picture

Folding machine RAS 22.11 - see pictures, Stand fold / double-standing fold

Deburring press REIS SEP6-20D - see pictures

Electric tool changer RASTER Premat EWD20

Electric stroke cylinder RACO T1A61169, pressure 1000 daN, adjustment distance 400 mm

CATALOG NO. 7191 TECHNICAL DATA - loading hopper inlet 870x735mm - rotor working width 720mm - main engine 18.5kW - pump motor approximately 0.75kW - number of knives 17 pcs - knife dimensions 80x40mm - 20mm sieve - pressure drawer - electric autoreverse - outlet for chipped wood, diameter 250 mm - dimensions length/width/height 2000x1350x1370mm - weight 1586kg ADVANTAGES – pressure drawer - very good condition – used chipper The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 38900 PLN Net price: 8644 EUR depending on the price 4.50 EUR Net price: 10237 USD depending on the price of 3.80 USD (Prices may vary with higher fluctuations) Planers and Moulders, Planer, ŻEFAM ,DZSB-40, Planer in poland, Planers and Moulder ...

2 squid drilling spindles ROTAX, for conversions etc.

Threaded drilling machine with up to 10 spindles, adjustable drilling pattern

Hydraulic unit 250 l, 4 kW, max. 45 bar More: Hydro-aggregator FORTUNA Sperry Vickers, 200 l tank, with various valves pump: G-PA3-25-EK1-20R (see picture)

- Please note! Price per piece! - Suitable for several motors - LS-4000 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new technologies and processes int ...

Technical data for the workbench frame: Manufacturer: Stow Type: Pal Rack NS Basic dimensions: Width: 1,550 mm Depth: 600 mm Height: 900 mm The scope of delivery includes: 02x Workbench stand, used Material color: blue Stand height: 900 mm Stand depth: 600 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled ( bolted truss ) 04x Workbench trusses, used Material color: orange Box profile: 80 x 50 mm Clear width: 1,350 mm 08x Locking pins, used Finish: sendzimir galvanized To secure the longitudinal members against unintentional lifting The images serve to illustrate the material. The colour of the material may vary. - The workbench racks are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3 - 5 working days. General information about the product: This item is available f ...

Hydraulic unit 360 l, 2 x 11 kW, 2 memory More: Hydro-aggregate REXROTH DB 250-04-0, 1 memory, various valves Hydro-aggregator REXROTH, 60 l tank, various valves (see pictures)

Hydraulic unit 160 l, approx. 4 kW, various valves etc.

8 piece elements with ROeHMHELD swivel clamps, for conversions etc. further: 4 piece detto

Vertical frause reiDEN VF350-3D, table 1750 / 400 mm, 1250 / 300 / 450 mm

Technical data for the workbench frame: Manufacturer: Stow Type: Pal Rack NS Basic dimensions: Width: 1,550 mm Depth: 800 mm Height: 900 mm The scope of delivery includes: 02x Workbench stand, used Material color: blue Stand height: 900 mm Stand depth: 800 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled ( bolted truss ) 04x Workbench trusses, used Material color: orange Box profile: 80 x 50 mm Clear width: 1,350 mm 08x Locking pins, used Finish: sendzimir galvanized To secure the longitudinal members against unintentional lifting The images serve to illustrate the material. The colour of the material may vary. - The workbench racks are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3 - 5 working days. General information about the product: This item is available f ...

Tape straightening machine with feed roller pair, upper half hydr. foldable, roll width max. 320 mm, rollers 60 mm, otherwise see pictures

P88 - used approx. 35 m³ / 35,000 litres polyester tank / GRP-tank, including brine maker, aboveground, upright, with funnel, in good condition. volume: approx. 35 m³ / 35,000 litres material: polyester / GRP diameter: approx. 3.00 m on the inside height: approx. 8.00 m Manufacturer Reich, aboveground, vertically standing tank / silo, with inner chamber and funnel. Combined salt silo with brine maker below it. Dome on the top of the tank, multiple connections, in- and outlets, including filling tube. The container can be used as a storage tank for salt or many other media. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one  ...

Machine number: ST-R-1660 Buerstentgratmaschine for the deburring of metal sheets or plates Power supply: 380 V 50 Hz 1.0/1.4 kW 2 speeds: 1500-3000 rpm. Brush diameter: 250 mm

1 x Refurbished Pomini Farrel model P160 Banbury internal mixer, Original year of manufacture 1984, Rebuilt in 2017 (not used since), Mixing chamber volume 160L Net, Batch size at 75%FF and SG 1.0 - 120kg, 2 wing rotors, PYH hydraulic dust stops (new), hydraulic drop door discharge with linear actuator and spade latch, Pneumatic hopper, Unidrive gearbox type NF160, rating 640HP, Input speed 1500 rpm, output 39.6rpm. with 470kW, 500V DC variable speed motor. Mechanically complete but currently without electrical controls.

For sale a grid box 1200x840x950mm (L x W x H) execution is verzinkt.klappbarstapelbarTragkraft Max 900KgMasche 60x120mmBei any further questions please contact us at. Shipping possible!

4 head ( 50 mm)

duble door

Height 1250 Width 1000 mm Length 1500 mm Capacity 700 l Voltage Electrical: 400V 50Hz 3N Installed Power 2.4 kw Main material Stainlees Steel Time of realisation 2-3 weeks With With mixer

This machine is particularly suitable for the processing of electrical waste with PVC and rubber. Diameter range 2 - 115 mm Cutting speed 35 meters per minute Weight 350 kg

DEAR'S SALE, ONE PC WARTSILA 6R22 HF-C & FOUR PCS 8R22 HF-C COMPLETE ENGINE FOUR PCS 3.25/1 VALMET R/G TWO CROME PROPELLER PICTH CONTROLLED Brgds Hakan KUSCU +905323642509

Te Koop: Manifold Ros Mixproof valve. aansluitingen 2 duims en 3, 2 pieces in een set gel branch.

Working range: tube Ø 21,3 – 114,3 mm Wall thickness 2,3 - 11 mm Length: 6-12m Composed of two RFA14 chamfering machines with transport devices between the machines. The task of machines is to chamfer inside and outside both ends of the tubes. The range of diameters of chamfered tubes 21.3-114,3mm and wall thickness of 2.3-11mm in the length range of 6-12m. The task of transport in the area of the chamfering machines is to collect the tubes from the roller table and move them between the chamfering machines. Machine is new, never used.

Bergen Rolls Royce B35:40V20AG complete gas power plant Year of Make 2011 running hours: 16.380 Hours 8415 Kw 11kV 50 Hz at 750 RPM with AVK DIG 167 f/8 alternator 9100 kvA Complete power plant with all auxilaries: Control Air Compressor ,Self Demand Transformer, LT cooling water system, cooling tower, HT cooling water system, cooling tower, cooling fans, Start Air Compressors and Air tank, Natural Gas Regulator Unit, Emergency Diesel Generator 220 kVA, piping systems oil filter and heater exchangers, Neutral Earthing Resistor Unit, Generator Cooling Fans, Steam Boiler: Nooter/Eriksen Capacity: 5.5 T/h, Switchgear Units, engine tools, instruction manual and more... Please contact for more info and complete scope / offer

LEYBOLD pump level data to the pump status: RUTA - RUTA 1001 (20900895586) Pumpenystem (= 02209 Backing pump: LEYBOLD Sogevac SV300 Cat: 10931 Booster pump: Leybold Ruvac WAU1001 Cat: 11741 Condition: to see in Picture 3-6. The pump stand is completely clean newly painted and serviced in accordance with the manufacturer's specifications and tested and is 100% right, no oil leak Warranty: 3 months There are 2 x SV300 + WSU1001H available! There are 10 x SV300 + WAU1001 verguebar! Price refers to 1 PCs.; ready for operation

Cable winding and unwinding system or winding coil ON 10 28 F and ON 10 28 E F, measuring unit M161, control Siemens

Te Koop: Ros manifold Mixproof valve. 70 mm en aansluitingen, 4 3 pieces in een set gel branch.

Mixing tank 80 liters REITZ MB80 for bulk materials Used open mixing tank approx. 80 liters with geared motor 0.75 KW and inclined blade stirrer 700 mm Application: Mixing of powdered materials. Slow-running, high-torque agitator for powdered mixes. High torque with low energy consumption. Stirred tank: Mobile mixing tank made of stainless steel with bottom slide for draining the mix. All boilers are refurbished and clean. Capacity approx. 80 litres Geared motor: Geared motor Lenze 0.75 KW, 230 / 400 V, 3 phases, 50 Hz, 1410 rpm, IP 55, ratio i = 56, 25 revolutions per minute at shaft output. With motor protection plug to protect the geared motor. Shaft: stainless steel shaft diameter 20 mm, length 500 mm, material 1.4571 Agitator: Double-bladed inclined blade stirrer, diameter 700 mm, material stainless steel 1.4571

Stirring tank 150 liters with agitator 0.6 KW, 900 rpm and inclined blade stirrer 244 mm Container: Single-walled stainless steel tank 150 liters with drain tap. Rollable aluminum frame with aluminum profiles 45 45 mm. 4 swivel castors, 2 of them with brake. Electric motor: Used, powerful electric motor Baumüller, 0.6 kW, 900 rpm, 3 x 230/400 volts. With motor protection plug. Shaft: Precision stainless steel shaft D20, length 700 mm, diameter 20 mm, Material: Stainless steel 1.4301. Coupling: Rigid shaft coupling, material stainless steel 1.4571 Agitator: Double-bladed inclined blade stirrer, diameter 244 mm, material stainless steel 1.4581, blade adjustable in angle.

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

17,000 LITRE STORAGE TANK/WINE TANK, RIEGER, UPRIGHT MADE OF V2A https://eurolux.de/product/24-0513euba-17000-liter-lagertankweintank-r ieger-stehend-aus-v2a MJ UNI-RILL Tank top floor: Sloping floor with 3 % floor slope 4 reinforcement profiles 2 crane eyelets Threaded socket DN65 reduced to DN50 central downward drawn CIP cable DN50 connection DN 50 front Cylinder: Level indicator with strip and scale Tasting tap DN25 Clear drain with angled seat valve DN 50 Tank underbody: Cone bottom with residual drain pipe pulled forward in the middle with disc valve DN 50 tank wall 4 feet with domes - height adjustable with washers

Round table for ready product Diameter: 1580 mm Power: 0,12kW, 50Hz

Te Koop: Stainless steel butterfly valve Handbediend. 6 "las las karambir zonder."

P134 - used approx. 40 m³ / 40,000 L polyester tank, GRP tank, lying on steel bases, good condition. Technical details: Capacity: approx. 40 m³ / 40,000 litres Material: Polyester / GRP Manufacturer: Reich-Tank Dimensions: approx. Ø 3.00 m × L 6.50 m / H incl. base 3.70 m Miscellaneous: Used polyester tank, professionally cleaned and in good condition. Above-ground tank on 2 steel bases, dome and all connections on top of the tank body. Pictures from the inside will follow. Only the pure tank is sold, without attachments such as pipes, fittings and accessories. The tank can be used as a storage tank for many different media such as water, liquid feed, whey, potato steam trays, molasses, manure, leachate, rapeseed oil or as a rainwater collection tank, etc. Price on request. Transportation can be arranged at a reasonable price. It is not possible to update all our  ...

This Rational UltraVent hood for Rational combi steamers, including connection kit, fits the CMP, SCC 61/101 electric combi steamers from 2011 to the present (index H+I). The hood has been tested in our in-house workshop and is fully functional. The RRP. for this Ultravent hood is 3.696 € net. The indicated price is net, plus 19% VAT. Service: We would be happy to put you in touch with a certified Rational customer service throughout Germany. Are you looking for a specific type of Rational device? Ask us, we have access to an extensive range of used and new goods. We will be happy to advise you on all types of devices, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our used equipment service for you: • 6 months warranty on all electrical parts • Professional Overhaul / Inspection & Professional Cleaning • Tested & fully functional - or money back � ...

Vertical Milling Machine RAMBAUDI type RAMMATIC 600 Travel X 1260 mm Travel Y 690 mm Travel Z 600 mm Numerical Command NUM 1060 Cone SA 50 Table size 2000 x 600 mm Year of construction 1991 Voltage 380 V Depth 2500 mm Total height 4000 mm Weight approx 9 T

Different kind of sheeted and rolled breads. Niittypitko 2000 pcs / h, 2 rows, dough thickness 3-4 mm Coffee bread Kranssi 2000 pcs / h, 2 rows, dough thickness 3-4 mm Muhku, 10 000 pcs / h, 8 rows, dough thickness 6-8 mm Ciabatta, 7200 pcs / h, 6 rows Folded bread, 4800 pcs / h, 4 rows, dough thickness 5 mm Capacity based on 20 strokes per minute for the retracting belt, in combination with the product discharge conveyor system Product specification: Manufacturer: Rademaker Holland Type: Crusto bread line Year: 2008 Voltage: 3 x 400 v + N + Pe, 50 Hz Control voltage: 24 Vdc Power consumption: 21, 9 kW Inom: 41 A, max fuse 50 A Avarage air consumption: 196 nl / min Max air consumption: 548 nl / min Dimension: L 21 000 mm, W 3000 mm, H 6000 mm

DOUBLE KNIFE GUILLOTINE WITH GLUE APPLICATOR Manufacturer_ F+R?Model_ 45/3400? Max. cutting length (grain direction)_ 3400 mm? Min. cutting length (grain direction)_ 1050 mm Cutting width (cross grain) continuosly_ 65/450 mm Cutting width (cross grain) discontinuosly_ 450/800 mm

82 MW Rolls Royce Trent 60 - NATURAL GAS TURBINE COMBINED CYCLE POWER PLANT -Rolls Royce USA, manufactured Trent 60 (SGT-A65) Gas Turbine Generator Set; Manufactured in 2016, delivered in August 2017 65.9 MW(e) ISO 43.8% Gross efficiency / 8,228 kJ/kWh Heat Rate DLE Dry Low Emissions with ≤ 25 ppmvd at 15% O2 on fuel gas Cold start to full power in under 10minutes 50Hz, but easily convertible to 60Hz Engine still preserved in original shipping container An aero derivative gas turbine -Siemens Steam Turbine Generator SST-300 C2S/C160; Manufactured in 2016 Output 15.75MW ISO Speed 7059 RPM Admission Steam Temperature 400 Degrees C Admission Steam Pressure 30 bara Exhaust Pressure 0.07 bara Rotation- Right

Te Coop: Rosemount of for 3051 TA1A2B21BK8M5P1Q4Q8S1C4 Flensaansluiting gating HoH Doorsnee gat druk 165mm 125mm 18mm 18mm Flensdikte Max 40 bar Display: Yes

For sale is a completely overhauled turbocharger from the renowned manufacturer ABB, model RR131-14. This turbocharger has an operating time of 0 hours since its complete overhaul and is therefore in excellent condition, almost as good as new. The internal reference number or SAP no. is 1107605o and the serial number is HT497310. The spare part number is 547404. We kindly ask you to check that this spare part number matches the one you need. If there is a discrepancy, we unfortunately cannot guarantee the correct functionality of the turbocharger for your specific application. Nevertheless, we are able to make the necessary adjustments to modify the turbocharger for your specific needs. The model RR131-14 was manufactured in 2008, has a rated speed of 75000 rpm and is cooled by water. The nominal power in kW is not available (nv). Please note that there is a small damage to the  ...

For sale is a completely overhauled turbocharger from the renowned manufacturer ABB, model RR131-14. This turbocharger has an operating time of 0 hours since its complete overhaul and is therefore in excellent condition, almost as good as new. The internal reference number or SAP no. is 1104951o and the serial number is HT408414. The spare part number is 228455. We kindly ask you to check that this spare part number matches the one you need. If there is a discrepancy, we unfortunately cannot guarantee the correct functionality of the turbocharger for your specific application. Nevertheless, we are able to make the necessary adjustments to modify the turbocharger for your specific needs. The RR131-14 model has a rated speed of 75000 rpm and is cooled by water. The year of manufacture and the nominal power in kW are not available (nv). Please do not hesitate to contact us with any ...