r 37 k used for sale

ELECTRICAL SPECIFICATIONS   total power consumption: 57 kW   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 4900 mm   space requirements -front/back-: 2600 mm   total height: 2600 mm   total weight approx.: 2600 kg Washing medium: solvent-free basket/rack size     790 x  590 x  600 mm cabin dimensions    1200 x 1200 x 1200 mm useable volume       800 x  780 x  900 mm net weight of batch                200 kg Attachments: Dosing unit DOSANTEC A763-168M buffer tank 100 ltr Waste water tank 75 ltr rotating spraying cross from top rotating spraying cross from bottom Drying device (circulating air) with heat recovery 5 heating elements each 9 kW driven roller conveyor

BUCHER QX61-200/62-080/63-080 R447-6-D Q18301417 Pd: 125 / 210 / 320 bar Vg: 200 / 080 / 080 cm3/U Nr: 100036553

Overview  This decrater was manufactured in 1993 by the German company Otto Fleischer. The Rota/1/A model is a single-head unpacking machine. It is still installed and immediately available. Technical data  Bottle formats processed: 0.7L (GDB) and others  one-head operation 90° infeed-outfeed design Operating pressure: approx. 6 bar Power supply: 380 V / 50 Hz / N / PE Connected load: approx. 4 kW Control voltage: 24 V

Pressure total: 140 ton Stroke: 800 mm Daylight: 1.004 mm Free frontal opening L-R: 2.060 mm Table surface area : 2.000 x 520 mm Slide area: 2.040 x 520 mm Working speed: 4 -20 mm / sec Rapid travel: 135 mm / sec Return speed: 120 mm / sec Weight of machine approx.: 14 ton Height over floor approx.: 4.810 mm Oil volume: 700 l

This 3-axis Roders RFM 760 vertical machining centre was manufactured in 2005. It features a spindle speed range of 3,000 to 42,000 rpm and travel paths of 760 mm in X, 550 mm in Y, and 300 mm in Z. Equipped with Röders RMS 6 V3.6 control, it offers precise machining capabilities. If you are looking to get high-quality milling capabilities, consider the Roders RFM 760 machine we have for sale. Contact us for further details regarding this machine.

Press capacity: 315 ton Ram stroke adjustable: 30 - 100 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 370 mm Table surface area : 1600 x 1100 mm Slide area: 1600 x 1100 mm Hole in table: 600 x 180 mm Number of strokes: 15 - 180 s.p.m. Table height over floor: 1200 mm Required power: 170 kW Height over floor approx.: 4900 mm Dimensions L x W x H: 4900 x 1900 x 4900 mm Weight of machine approx.: 55 ton

This HEESEMANN BÜRKLE wood production line was manufactured in 2001. It features a comprehensive oil application line, including RBO vacuum feeding Tornado SC 1300, HEESEMANN MFA 8 with cross-lengthwise brushes, and BÜRKLE SLC 1400 roller application machines. Enhanced with a new Siemens control system in 2024, consider the opportunity to buy this HEESEMANN BÜRKLE wood production line. Contact us for more information.

This REIFENHÄUSER BI Trudes 115 was manufactured in 2013. Ideal for pipe extrusion, this machine represents a robust addition to any production line. Contact us for more information.

description: High quality control unit for pallet conveyors for a part of a 50.000 bph filling line For approx. 5 frequency controlled drives in a total, diverse protective switches (see pictures for details). The Danfoss inverters are overhauled (formated) and can be commissioned without concern. The software might be added as well. An andaptation to your project can be also offered. Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offe ...

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The scope of delivery includes: 01x Stand protector, used Manufacturer: Nedcon Material color: blue Drhw0R Total height: approx. 900 mm Stand protector height: approx. 800 mm Total width: approx. 110 mm Inner width: approx. 102 mm Total depth: approx. 45 mm Material thickness: approx. 4.00 mm Leg size: approx. 65 x 65 mm Height deflector: approx. 50 mm Drill hole spacing: approx. 60 mm Drill hole diameter: approx. 11 mm suitable for frame profile width: 100 mm including mounting material composed of: 04x Hexagon Bolt M 10 x 35 mm 04x Hexagon Nut M10 08x Washer M10 Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately d ...

Stock# U2448-2 Used pin mill by Jehmlich (Germany) model Rekord D, designed in carbon steel. Mill body made of cast iron. Unit has milling discs with a diameter of 610 mm made of carbon steel. Mill has one fixed and one rotating milling disc driven by a belts driven with an ex proof electric motor with a power of 22kW, 2940 rpm, 380 V, 50 Hz. Machine is equipped with a carbon steel feeding hopper and bottom unloading. Whole thing is mounted on a frame made of carbon steel. The set includes a spare set of milling discs and pins. Not included technical documentation.

Fritsch Rollfix Pastry brake Pastry brake, total length 3000mm, belt with 600mm, roller width 630mm, with safety cage, mobile, 1Ph

A new replacement stage type VMX 110 RD is offered, see pictures. If you have any questions, please feel free to contact us.

Manual turning head Hydraulic clamping Longitudinal travel X-axe: 2000 mm Cross travel Y-axe: 1000 mm Travel Z-axe: 800 mm Dimensions clamping space- table: 2200 x 800 mm Power on spindle: 18,5 kWt Admission in millinghead (ISO): ISO 50 Max speedrange: 1500 rpm Control: Heidenhain Weight: 14000 kg

Type: Qbo120-3-316-SGPV Serial number: 2304023123006 Year of construction: 2012 Bowl: 120 litres Speed: 0 - 2000 RPM Infeed height: 1450 mm Heating: steam, 160 kg/h Compressed air: 6-8 Bar, 20 l/min Power: 3 x 400V, 50Hz, 22kW Dimensions: 1800 x 1750 x 1800 mm Weight: 900 kg With automatic mixing, vacuum, double jacket and steam injection Automatic lid and tilting

charge load: 150 liter : 1.000 mm tank diameter / tank height: 920 / 480 mm : 210 mm voltage: 380 V weight of the machine ca.: 630 kg dimensions of the machine ca.: 1,10 x 1,50 x 1,30 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

volume capacity: . total power requirement: . kW weight of the machine ca.: . t The technical data is manufacturer or operator information and is therefore not binding for us. We reserve the right to sell the goods prior to sale, our terms and conditions of business and sale apply exclusively. About us more than 400 of our own machines in stock over 12,000 m² of storage space, crane capacity 70 t more than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. You can find further offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Model: Avon 1533-56L Year of Manufacture: 1992 Type: Aeroderivative Gas Turbine Rated power: Approximately 16,347 kW (22,225.73 hp) to 17,007 kW (23,123.08 hp) DIRECTINDUSTRY Thermal Efficiency: Up to 44% Dimensions: Length: Approx. 3,200 mm Diameter: approx. 907 mm Weight: Approximately 1,310 kg

Load capacity: 1000 kg max. opening: 1300 mm min. opening: 500 mm

The scope of delivery includes: 06x Steel panel, used Manufacturer: SSI Schaefer Total depth: approx. 960 mm Inner depth: approx. 955 mm f. Stand depth: 950 mm Total width: approx. 300 mm Material thickness: approx. 2.50 mm Material colour: sendzimir galvanised Frame profile: approx. 300 x 40 x 20 mm Weight|pcs.: approx. 7,940 kg Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

ATEX basket centrifuge manufactured by ROUSSELET ROBATEL in 2017, model RC20VXR. Material 316/316L stainless steel Technical features Model RC-20-VXR Year of manufacture 2017 Maximum load (density 1.25 kg/dm³) 2.5 Kg Useful load 2 L Machine motor 400V / 50Hz Maximum speed 3000 rpm Equipment configuration ATEX Feeding pipe Cake washing pipe ELECTRICAL PANELS Lamp Suspension: on inertia plate + silent blocks Dimensions Basket diameter 200 mm Transport information Length 2100 mm Width 1200 mm Height 2000 mm Condition Unused Made by ROUSSELET ROBATEL

used side feeder for foil snippets / scrap Centrifuge with drive and feed container this unit was mounted on a 150 mm extruder Capacity over 320 kg/h

material: Stahl Dimensions (L/W/H): verschieden mm Steel in various dimensions:Example dimensions:250x80x6000 140x120 200x180 330x79x6000 200x200 200x140 approx: 200 to 250 t available The technical data are manufacturer or operator specifications and are therefore not binding for us. We reserve the right to prior sale, only our business and sales conditions apply.about usmore than 400 own machines in stockover 12,000 m² storage area, crane capacity 70 tmore than 1000 articles accessories for your workshopYou want to sell machines production lines or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Marchesini RIBATINO RIB. 730 turning conveyor for folding cartons, belt width 70 mm, electrics 1x220V+N+PE/50Hz, max. absorbed power 2 A, max. trip out value 6 kA, machine floor space approx. 1300 x 700 mm (LxW), machine height approx. 1600 mm, machine net weight approx. 120 kg

Manufacturer: Barberan, Type: RAB 1300, Work piece width min-max mm: 1300, Working widht max mm: 1300, Spraying heads - total: 12, Feeding speed m/min: 2-12, Spraying heads - total: 12,

Manufacturer: unbekannt, Type: Hubtisch mit Rollbahn, Year: ca.1990, FREETEXT1: Hubhöhe ca.800 Oberkante Rolle, FREETEXT2: Rollenbreite 800, FREETEXT3: Rollendurchmesser ca.60 mm, FREETEXT4: Hubbühne mit Fahrwerk, FREETEXT5: Pumpe im Hubtisch, FREETEXT6: Hubtisch mit Fahrwerk, Year :ca.1990

Manufacturer: Rippert, Type: HOW TK 8000, Year: 2000, Control: yes, Channel width in mm: 1400, Channel height in mm: 2050, Channel length in mm: 8000, Chain transportation system length in mm: 13.900, Thermal output: 32 kW, Max. air temperature: 30, Damper register - items: 1, Exhaust air m³/h: min 500, Lösungsmittelmenge g/min: 160, Year :2000

Manufacturer: Fischer Rückle, Type: Cut Master, Year: 2007, Control: Fischer Rückel, Cross cutting guillotine: Qeurschneidanlage und Verbindungsmaschine, Cutting lenght mm: 250-2800, Working hight mm: ca.1,5, Digital readout lineal guide: yes, FREE TEXT: verlleimung über Fadensystem, Year :2007

Manufacturer: Reimelt/Henschel, Type: FM L 30 / KM 85, Year: 2008, Wight approx. kg: 900 kg, Year :2008

Manufacturer: Fischer Rückle, Type: FZK, Year: 1998, Working width mm: 1200, Veneer thickness min mm: 0,5, Veneer thickness max. min: 1,6, Feeding speed max m/min: 10-60, Feeding speed continous adjustable: yes, White glue connection: yes, Blue cooling: yes, Total power kW: ca.10, Wight approx. kg: 1500, Year :1998

Manufacturer: Holzher Vorschub 3 Rollen, Type: ET 117, Feeding by rollers: 3 Rollen, Technical data:: 0,75 , Speeds: 4, Deflection of the pendulum axes mm: ca.25 mm,

Manufacturer: IMA, Type: Radiusfräsen, Gear: 2 Motoren tastend oben und Seite, Power kW: 1, Volt/Hz: 133, pm: 11500, Gear: 2 Motoren tastend oben und Seite,

Manufacturer: Rippert, Type: ST 80 2500 R, Working widht max mm: 2000, Max. working depth in mm: 800, rotations rpm: 2900, Engine power kW: 1,5, Flow rate approx. m3/h: 1600, Working height in mm: 835, FREE TEXT: 2 Staubkästen/Filterreiniung,

Manufacturer: Raimann, Type: KR 230, Year: 1993, Controlled feeding lineal: no, Cutting widht mm: 230, Working hight mm: 80, Diameter saw blade min-max mm: 350, revlutions saw spindle rpm: 6000, Diameter saw spindle mm: 65, Power engine kW: 30, Wight approx. kg: 2500, Year :1993

Manufacturer: Busch Schleifbürste Rotationschleifbürste, Type: Robatech 1300, Year: 2014, Control: Siemens, Software: Busch, Monting of the machine: 1 Schleifbürstenband, Number of units: 1, Working widht mm: 130, Through running hight max mm: 0-80, Number of rotations controlled: 30-140 m/min, Units mounted upright: Rotation 360 Grad, Fast exchange device: Bürstenbesätze, Through running hight max mm: 0-80, kW output motor: 5,5 Bürste/, Feeding speed continous adjustable: 4-12, Weight approx. kg: 3500, Required space L x W x H mm: 3840 X2400 X2000, Year :2014

Manufacturer: MB Busch, Type: Robatech 1300, Year: 2002, Control: Siemens, Monting of the machine: Kettenbürstenschleifsystem, Number of units: 1 Rotierend, Working widht mm: 1300, Through running hight max mm: 150, Diameter of brushes: Einschubbürsten, Fast exchange device: Bürsten, Through running hight max mm: 150, Vacuum belt: yes, Feeding speed continous adjustable: yes, Dust removal brush: yes, Weight approx. kg: ca.2000, Required space L x W x H mm: 3000 X 2000, Workpiece clamping technology: Vakuum, Year :2002

Manufacturer: Mekanika, Type: Apstapler Rohholz, Control: Omron, Work piece width min-max mm: 40-1300, Min.-max. workpiece length in mm: 150-3000, Min.-max. workpiece height in mm: 10-60, Vacuum feeding: yes, Crosswise feeding: yes, Stacking pattern, single-row: mehrreihig, Number of stacks: 2 Stapleplätze, Cycles approx.: 5, Number of sucking lines: Unigripper, Removal of protective boards: no, Feeding speed continous adjustable: yes, Feeding by cross conveyor: yes, machine ready for demonstration: yes, FREE TEXT: Platzbedarf ca.10 m X 7 m/Auflegestationen 5000 mm und 7500 mm,

Manufacturer: Reiplinger Hydraulische Pneumateische Stanze für Fensterbeschläge, Type: BSD-R6.6 SH-GR80, Model: inkl.Anschlaglineal ,

Manufacturer: Cefla, Type: Rotostain, Year: 2005, Control: yes, Work piece width min-max mm: 10-1350, Min.-max. workpiece length in mm: 150-3500, Min.-max. workpiece height in mm: 10-60, Pistolenantrieb: 16, Feeding speed m/min: 2,5-10, Year :2005

Manufacturer: Biesse, Type: Rover 23, Year: 2000, Control: yes, Working range X: 2900, Working range Y-axis: 1300, Working range Z: 140, Milling engine 1 hours power: 7,8, Vertical drills-X: 10, Horizontal drills-X: 6, Weight approx. kg: ca. 3500, Year :2000

Manufacturer: Transport Rollengang, Working length mm: 2500, Working widht mm: 800, Durchmesser Rolle mm: ca 80, Anschlaglineal link und rechts (ohne verstellung): yes, : ohne Antrieb,

Manufacturer: SCM, Type: RECORD 100 AL XL TVN, Year: 2010, Working range X: 3110, Working range Y-axis: 1240, Feeding speed max m/min: X=60, Y=45, Z=30, Number of tables: 1, Traverse table: yes, Vacuum pumps m³/h: 250, Saw unit: yes, Magazine Qty: 12, Year :2010

Manufacturer: Rippert, Filter system - positive pressure: yes, Volume flow rate m³/h: ca. 7.500, Number of filter filter gallerys: 2, Required space L x W x H mm: 4.800 x 1.800 x 4.700,

Manufacturer: SEW EURODRIVE, Type: A2E170-AA11-65/R60DT7ID4BM, Volt: 220/266, Ampere 1: 0.22-0,35, Motor torque Nm: 5, pm: 2700/300, Watt: 46-78, Weight approx. kg: 28,

Manufacturer: Siemens Getriebemotor, Type: RPL 40-1 H<CRLF>9486 1/5 BK, Volt: 375, n-min: 18, pm: 4800, Weight approx. kg: 50,

Manufacturer: MB Maschinenbau, Type: ROBA-Simplex, Year: 2010, Control: yes, Monting of the machine: Schleiflamelle, Control: yes, Sanding belt hight: 100 mm, Table length: 1800 mm, Slewable sanding head: no, Sanding belt width max mm: 100, Work piece hight min-max mm: 80, Schleifbandgeschwindigkeit min-max m/sec: Frequenz, Bandantriebsmotor kW: ca.4, Oszillation mm: yes, Hight adjustment by hand wheel: yes, FREE TEXT: Luftpolsterkissentisch, Year :2010

Manufacturer: HSM , Type: Rotationsquerschneider, Year: 2012, Control: Siemens, Längenogabe: yes, Stückzähler: yes, Cross cutting guillotine: yes, Cutting lenght mm: 1.500 - 2.620, Schnittbreite min-max mm: 600 - 2.100, Abstapelung der Funierblätter: für Folien, Hebebühne: yes, machine ready for demonstration: yes, FREE TEXT: Anlage wurde um einen UV Strahler und ein Kühlaggregat erweitert/ Vorschub max.40 Meter, Year :2012

Manufacturer: Hackemack Transportrollengang, Type: Rollgang, Year: ca.1990, Working length mm: 2100, Working widht mm: 1460, Engine power kW: 0,5, Durchmesser Rolle mm: 60, Rollenmittenabstand: 140, Wellendurchmesser: 25, angetrieben über Rundriemen: yes, Total hight mm: 890 +- 50, Total hight mm: 890 +- 50, Feeding speed continous adjustable: yes, Year :ca.1990