quality used for sale

ICONOS R100 Polydoros SX 65/80 Opti 150/40/80 HC-100 VIDEOMED DI C. last major quality check: March 2014

Large number of used food tanks at a special price! Steel tanks in good condition, above ground, standing on 6 bases. Contents: approx. 60 m ³ / 60,000 litres, coated inside Dimensions: approx. Ø 3.10 m x 8.50 m high, with base approximately 10 m overall height weight: 8, 0 t. The tank is lined with a high-quality, food-approved inner coating, see photo. Completely drainable, manhole, and more. Can be used for liquid fertilizer, as raintank, storage tank for water, for liquid feed, whey, animal feed, pig feed, stillage, potato steam skins, molasses, manure, AHL, ASL, seeping juice, canola oil, cooking oil. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has ...

used approx. 3 m³ / 3,000 litres polyester tank / fibreglass tank / transport tank Manufacturer Rotband, a very good quality, above ground, lying, 2 steel bases, good condition Dimensions: L = 1.65 m x W = 1.40 m H = 1.90 m GH with base 2.15 m dome on the front, several in - and outlets The container can be used as storage tank for juice, canola oil, water, liquid food, whey, potato steam skins, molasses, liquid manure, AHL, ASL, as rain tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so that we can advise you personally. More information and offers on our site: pr ...

Used approx. 25 m³ / 25,000 litres Polyester tank , fiberglass tank (Staffelstein tank), above ground, good condition. Dimensions: Ø 2,80 m x 4.20 m high-quality tank on rock/ring, dome on the top of the tank body, multiple ports above, including filling tube and floating indicator. The container can be used as a storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, seeping juice, canola oil, AHL/ASL or as rain drip tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so that we can advise you personally. More information and offers on our s ...

From small through medium to big concrete batching plants, Prometal presents the most efficient ways of production of concrete with great results of high-quality concrete. Our customers can choose between 15 cubic meters per hour to 120 cubic meters per hour concrete batching plants. Long-lasting structures and stable design provides our customers with long term profitable investment with no regrets. The aggregate bunker is designed and manufactured to operate under heavy working conditions for a long time. There are 2 electro-pneumatically controlled discharge gates, which provide easiness and choice in the discharge together with suitable elevation. Aggregates are weighed by 4 units of load cells. Electric installation of concrete batching plant includes all electrical connections of voltage, controlling and part for measuring of the plant. All installations and sa ...

Fully automatic conveyor belt made of stainless steel including water supply and height adjustment function Manufacturer: Solia Material: 1.4301 (V2A) Dimensions: Length: 3.80 m Width: 1.20 m Frame height: 80 cm Height with funnel: 1.20 m The conveyor belt was originally mounted on a potato peeling machine. It has several tracks to sort the potatoes. However, it is suitable for almost all types of bulk materials. Furthermore it has a funnel through which enters the bulk material on the band. However you can easily disassemble the frame where the funnel and the tracks are welded on.You can easily loose the frame with the help of the star head screw. The conveyor belt was hardly used and is very high quality! Therefore in a very good condition!

Thermo shrinking tunnel Shrink packaging quality for medium power infinitely variable separately adjustable top and bottom Max band-width: 600 mm Maximum clearance height: 220 mm

3-roll hydraulic with dual pre-pinch planetary configuration. new to complete, 45 days from order. -Plate width 3000 mm -Capacity rolling plate thickness 50 mm -Pre-pinch plate thickness 40 mm Machine configuration and accessories installed: -useful surface length on the rolls 3100 mm -upper roll size 480 mm -lower rolls size 440 mm -Digital position readouts. -Hardening treatment of the 3 rolls. -3 rolls driven hydraulic motorized with independent axial gear box on each roll. -Conical plate bending attachment with tiltable lower rolls hydraulic. -CE quality certification, Made in Italy manufacturing. -Service manuals and operation instruction manuals. -Hydraulic diagrams -Electric & electronic schematics with parts list. -Set of service tools for maintenance. -Electric power installed 50Hp. -3 phase voltage to be specified Warranty 12 months.  ...

New machines: Chocolate tank, dissolving agitators, Temperature control machines, chocolate pumps. Various sizes and services, stainless steel, very good quality. We are a sales and service partner for MASSA in German-speaking countries.

1 very well preserved double girder crane ideally suited to the transport and use of long goods crane driving towards Load approx. 4 x 4,000 = 16,000 kg track width approx. 20.565 mm Hook path about 6.500 mm Make steel Year of construction/renovation 1990/1993 Workshop overhaul 2016 FEM 3 m Crane equipped with high-quality wind factory units, synchronous and separately controllable to apply loads, radio control Working speeds: Hoist CA. 1,2/12.0 m / min Trolley gear approx. 5.0/20,0 m / min crane chassis approx. 10.0/40.0 m / min

1 high quality, factory-tested, well preserved double girder crane especially suitable for the Coilumschlag Load approx. 80,000/32,000 kg Wingspan approx. 25,600 mm Hook way approx. 8,500/13,500 mm Make SIEMAG/SIEMENS Overhaul and rebuild/workshop test 2009/2016 Trolley in robust wind plant design, between the crane bridge catwalk one-sided lowered to optimize the installation height, cabin control (expandable easily on radio), operating speeds: Main hoist 80 t to approx. 4.25 m / min auxiliary hoist 32 t up to approx. 10.8 m / min Katz LG 32/80 t Max approx. 40.0/20,0 m / min Crane chassis 32/80 t Max 80.0/40.0 m / min

1 factory-tested, very well preserved double girder crane with 4 wheels per side to minimise wheel loads Load approx. 100,000/32,000 kg Wingspan approx. 26,700 mm Hook way approx. 14,000 mm Make SKET-year of manufacture/overhaul/workshop test 1981/2000/2016 Very low equipped with high-quality two-rail wind work trolley with main hub usage as a mounted crane 100 t and auxiliary hoist 32 t, cabins - and radio control, ideal wheel load distribution by 4 wheels per side working speeds: Hoist main hoist 100 t up to 0.25/2.5 m / min auxiliary hoist 32 t up to approx. 7.0 m / min Trolley gear approx. 7.0/20,0 m / min Crane chassis approx. 11.0/32.0 m / min

1, used, very well preserved double girder overhead travelling crane with 4 wheels per page of optimal wheel load reduction Load approx. 110.0/50,0 t Span 23.20 m Hook way approx. 15.0 m Make Horw Workshop examination 2016 Use as very low mounting crane Equipped with high-quality, robust two-rail - wind movement trolley, ideal wheel load distribution by 4 wheels per side, catwalk along the Crane bridge, cabin, as well as floor panel (easily to expandable radio control) Working speeds: Hoist gear 110T approx. 0.3/1.5 m / min Change-over 50 t approx. 0.6/3.0 m / min Katz LG 4.0/16.0 m / min Crane chassis 10.0/40.0 m / min

THROW BAND / SPIN / BELT / DIRECT FROM THE MANUFACTURER! -Stable original cast band / belt / conveyor belt made of rubber, specially designed for baling presses (original quality) or many other applications in industry, agriculture, wood u.v.m.! -New, open reinforced, with mounted hook connectors in stainless steel, 2-ply top Supergrip profile, black, running side out fabric -suitable for CLAAS, Stockey & Schmitz and Welger P22/P23 -Name: EP 3-0 250/2, ceiling -Dimensions: length 2,040 mm x width 300 mm Shipping will be by UPS! On request, we can customize the conveyors / conveyor belts to your individual measurements. (All lengths and widths possible) Endless connection on request. Additional versions, with pimples, Stollen or structured surfaces available. More transport and conveyor belts in all other sizes available immediately . We ship worldwide we deliver worldwide, pl ...

FOOD CONVEYOR BELT, CONVEYOR BELT DIRECTLY FROM THE MANUFACTURER! BELTech GmbH in Lüdenscheid manufactures all dimensions and qualities according to your specifications. Premium quality for agriculture and industry. -one side coated underside of fabric with additional wedge bar, (11 mm wide x 8 mm high) in the Middle -endless -Food safe, white -Dimensions: 5,100 mm x 300 mm width x thickness length approx. 1.2 mm, surface with tunnels. -Tunnel approx. 20 mm in height, distance approx. 300 mm, tunnel length 245 mm, studs tip inclined (see photo) On request we can cut the belt conveyors / conveyor belts to your individual measurements. (All lengths and widths possible)

POTATO BELT, CONVEYOR BELT, CONVEYOR BELT DIRECTLY FROM THE MANUFACTURER! BELTech GmbH in Lüdenscheid manufactures all dimensions and qualities according to your specifications. Premium quality for agriculture and industry.

We offer for sale: Spiral mixer DIOSNA SP120 for 120 kg dough -with 2 watches and 2 speeds - with high-quality stainless steel boiler For further questions we are gladly available.

FEED BELT, CONVEYOR BELT, CONVEYOR BELT DIRECTLY FROM THE MANUFACTURER! BELTech GmbH in Lüdenscheid manufactures all dimensions and qualities according to your specifications. Premium quality for agriculture and industry. -New, on one side coated, open, 2-ply reinforced, with mounted metal connectors to the endless connect type Aligator RS-62, -Dimensions: length 6500 mm x 400 mm width x thickness 2.4 mm, surface with tunnels and double-sided wedge bar -Tunnel 20 mm high x 330 mm long, distance approx. 500 mm, with 2 wedge bar on the top of the face, edges flush, 6 x 4 mm, green

CONVEYOR BELT CONVEYOR BELT, FEED DIRECT FROM THE MANUFACTURER! BELTech GmbH in Lüdenscheid manufactures all dimensions and qualities according to your specifications. Premium quality for agriculture and industry. -Stable conveyor belt / conveyor belt for many applications in industry, agriculture, wood u.v.m. with textile plies, coated on one side, underside of fabric! -New, endless welded, 2-ply reinforced, with Central wedge guide rail on the underside, grooved profile 8 mm x 12 mm wide! -Dimensions: 7480 mm x 300 mm width x thickness mm 2 with 26 piece PVC T studs 30 mm high x 240 mm long (edge distance 30 mm each), obliquely set, -Band will be shipped with UPS! On request we can cut the belt conveyors / conveyor belts to your individual measurements. (All lengths and widths possible) Additional versions, with pimples, Stollen or structured surfaces available. Not is your de ...

MADE directly from the manufacturer with PREMIUM quality stock items Description: -Conveyor belt / conveyor belt made of rubber for many applications in industry, agriculture and construction industry - new, coated on both sides, open, 2-ply reinforced bottom cover made of PVC, with mounted metal connectors made of stainless steel to the endless connect -Dimensions: 9.152 mm x width 600 mm x thickness length approx. 6.5 mm, surface with tunnels. -With 15 piece rubber studs, 50 mm high, 600 mm long, distance approx. 610 mm,. On request we can cut the belt conveyors / conveyor belts to your individual measurements. (All lengths and widths possible) Additional versions, with pimples, Stollen or structured surfaces available. Statable VAT! Not is your desired size? No problem! We customize for you! More conveyor belts, drive belt and flat belt in all other sizes available immediately ...

Important and outstanding design features of the RaptorX-SL with steel substructure /RaptorX-SL3200/S15 The application variety of a RaptorX-SL CNC Fraes machine is variable due to the high-adjustable working area (read-through he under bridge variable : 150mm, 300mm or 400mm ) and the travel height of 300mm in the Z-axis (without extra charge) extremely large. special coarseness up to 17,500 mm (on one scale) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-coerpers. Use the system as a plasma cutting system or waterjet cutting system, corresponding extensions are available. In the middle range of the machine (between the footpipes ) you can even process parts up to a height of 850mm (beam shroughl, etc. ) or 3D body up to about 400mm hei ...

CNC plasma cutting machine Euen, 2 x 3 m, year of construction Dec. 2004, Type: Eu-SPP- 2000/3000 PF b with double-sided Bosch-Laengs drive. CNC control: ANC, M767F with DNC interface for CAD/CAM systems, complete system with plasma fine beam cutting system Kjellberg FineFocus 800 to 80 mm (up to 45 mm hole piercing and quality cut), Kemper fuel table and suction filter unit, CAD/CAM system and Buero PC with DNC transfer, year construction year: Dec. as (new price of the plant 140,970 EUR) Price VB EUR +VAT from location; very good condition, as good as new

Good quality of all kind of yeast and non yeast doughnuts due to complete automatic baking process Proofing Feeding Automatic Baking Turning Unloading

Specifications / Technical Data S-1000 CNC-Fraese and Engraving Machine The almost largest CNC machine in the High-Z series. With an external dimension of approx. 1350 x 800mm still handy enough and extremely powerful. With the High-Z CNC unit, they acquire an all-round talent in TUeV-certified quality (EMC). Whether you want to clamp complex parts on a groove table or, or to clamp factory tins into a high vice (the machine is on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be machined). or simply want to do engraving or drilling then they simply work on a flat base, on which they then attach e.g. an MDF plate, which they once overfrave plan and are then able to work up to approx. +-0.02mm exactly in depth. All CNC portal fraes machines are supplied with coloured energy chains on all axes due to the improved cable guid ...

Specifications / Technical Data S-1000 CNC-Router and CNC-Engraver This is the biggest machine of our High-Z cnc-router series. With external dimensions of approx. 1350x800mm it is still very handy. With the High-Z 3D-cnc-routers you purchase an allround talent in TÜV-certified quality. If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc-machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed). Or if you simply want to do engraving- or drillingjobs.you can work on a flat surface, with a pieces of sheet MDF fixed to it. Plane it once and you will be able to work with a precision of +-0,02 mm depth. All cnc-machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc-milli ...

Specifications / Technical Data S-720 CNC-Fraesmaschine With the High-Z CNC-Fraes.- and Engraving Machine you acquire an all-round talent in TUeV-certified Quality (EMV). Whether you want to clamp complex parts on a groove table or, or put factory tins in a high vice (the machine is on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be machined). or simply want to do engraving or drilling then they simply work on a flat base, on which they then attach e.g. an MDF plate, which they once overfrave plan and are then able to work up to approx. +-0.02mm exactly in depth. All machines are supplied with coloured energy chains on all axes due to improved cable guidance. Furthermore, all machines are protected with a double-secured emergency exit button. Another is located directly at the controller. Basic equipment of all high- ...

Specifications / Technical Data S-720 CNC-Router / CNC-Engraver / Milling machine With the High-Z cnc router and engraving machine you purchase an allround talent in TÜV-certified quality. If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc milling machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed). Or if you simply want to do engraving- or drillingjobs.you can work on a flat surface, with a pieces of sheet MDF fixed to it. Plane it once and you will be able to work with a precision of +-0,02 mm depth. All cnc routers / milling machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc milling machines are equipped with an emergency stop button. An additional emerge ...

Important and outstanding design features of the RaptorX-SL with steel substructure / RaptorX-SL2200/S20 The application variety of a RaptorX-SL CNC Fraes machine is variable due to the adjustable working area (read-through shoe under bridge: 150mm, 300mm or 400mm ) and the travel height of 300mm in the Z-axis (at no extra charge) extremely large. special groesmes up to 17,500 mm (at one scale ) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-plates. Use the system as a plasma cutting system or waterjet cutting system, corresponding extensions are available. In the middle range of the machine (between the footpipes ) you can even process parts up to a height of 850mm (beam shroughl, etc. ) or 3D body up to about 400mm height (at 400mm ...

Important and outstanding design features of the RaptorX-SL CNC Fraes machine / CNC-Fraese with steel substructure / RaptorX-SL2200/S15 The application variety of a RaptorX-SL CNC Fraes machine is variable due to the adjustable working area (through-shoehe under bridge : 150mm, 300mm or 400mm ) and the travel height of 300mm in the Z-axis (without extra charge) extremely large. special larges up to 17 500 mm ( on one scale ) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-coerpers. Use the system as a plasma cutting system or waterjet cutting system, corresponding extensions are available. In the middle range of the machine (between the footpipes ) you can even process parts up to a height of 850mm (beam shroughl, etc. ) or 3D body up to  ...

Specifications / Technical data S-1000/T Portalfraesmaschine / Engraving machine With the T-variant of the High-Z CNC-Fraese you acquire old-fashioned technology with the certain i-tuepfelchen in TUeV-certified quality (Emc). The High-Z/T Fraese is designed for even more accuracy (repeatability about 0.01mm ) and especially for higher travel speeds. Through the ball-circuit spindles used, the High-Z/T achieves fantastic accuracy and an almost unmeasurable reverse play of about 0.01mm. At the same time, high travel speeds of up to approx. 108mm / second ( 6500 mm / minute ) can be achieved. This is how engraving and fraes speeds of up to approx. 4500mm/min can be realized and urgent journeys up to approx. 7000mm/min. Here you can see a video about empty runs with the new high-Z/T 3D CNC machine. This makes this machine series in the industrial sector just as applicable for work ...

Specifications / Technical Data S-1000/T CNC-Router / CNC-Engraver With the purchase of the T-variation of High-Z CNC-router you get a proven technology with a certain icing of the cake in TÜV-certified quality. High-Z/T was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T CNC-engraver achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this cnc-machine you're able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. Here's a video on a unloaded drive with the new High-Z / T. This cnc-router series is usable in the industrial field as well as for works like engraving, milling, dr ...

Specifications / Technical Data S-720/T CNC-Fraesmaschine und Graviermaschine / Fraese With the T-variant of the High-Z CNC Fraes.-and engraving machine you acquire old-fashioned technology with the certain i-Tpuelchen in TUeV-certified quality (EMC). The High-Z/T CNC-Fraese is designed for even more accuracy (repeatability about 0.01mm ) and especially for higher travel speeds. The high-Z/T CNC-Fraese achieves fantastic accuracy and an almost unmeasurable reverse play of about 0.01mm due to the ball's circulation spindles. At the same time, high travel speeds of up to 108mm/second ( 6500mm/ minute) can be achieved. This allows engraving and feeding speeds of up to approx. 4500mm/min and express ingesses up to approx. 7000mm/min. Here you can watch a video of empty journeys with the new High-Z/T. This series of mechanical engineering is just as applicable in the industrial sec ...

Specifications / Technical Data S-720/T CNC-Engraving-Machine / Milling machine / CNC-Router With the purchase of the T-variation of High-Z CNC-router you get a proven technology with a certain icing of the cake in TÜV-certified quality. High-Z/T 3D-cnc-engraver was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T cnc milling machines achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this cnc-machines you're able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. Here's a video on a unloaded drive with the new High-Z / T. This cnc-machine series is usable in the industrial ...

Specifications / Technical Data S-400/T CNC-Portal-Router / CNC-Engraving machine with TÜV certification With the purchase of the T-variation of High-Z cnc-router you get a proven technology with a certain icing of the cake in TÜV-certified quality. High-Z/T cnc-routers was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T 3D-cnc-engravers achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this cnc-machines you're able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. Here's a video on a unloaded drive with the new High-Z / T. This 3D-milling-machine series is usable in the ...

Specifications / Technical Data S-400 Fraes machine / engraving machine With the High-Z CNC-Fraes.- and engraving machine you acquire an all-round talent in TUeV-certified quality (EMC). Whether you want to clamp complex parts on a groove table or, or put factory tins in a high vice (the machine is on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be machined). or simply want to do engraving or drilling then they simply work on a flat base, on which they then attach e.g. an MDF plate, which they once overfrave plan and are then able to work up to approx. +-0.02mm exactly in depth. All machines are supplied with coloured energy chains on all axes due to improved cable guidance. Furthermore, all machines are protected with a double-secured emergency exit button. Another is located directly at the controller. Basic equip ...

Specifications / Technical Data S-400 CNC Router / CNC milling machine / Engraver With the High-Z CNC-router / engraver you purchase an allround talent in TÜV-certified quality. If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc milling machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed). Or if you simply want to do engraving- or drillingjobs.you can work on a flat surface, with a pieces of sheet MDF fixed to it. Plane it once and you will be able to work with a precision of +-0,02 mm depth. All cnc-machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc milling / engraving machines are equipped with an emergency stop button. An additional emergency stop you fin ...

Specifications / Technical Data S-1000 CNC-Fraese and Engraving Machine The almost largest CNC machine of the high-Z series in TUeV-certified quality (EMC). With an external dimension of approx. 1350 x 800mm still handy enough and extremely powerful. With the high-z CNC unit, they acquire an all-round talent. Whether you want to clamp complex parts on a groove table or, or clamp the factory into a high vice (the machine stands on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be processed). Or just do engraving or drilling then they simply work on a flat surface, on which they then attach, for example, an MDF plate, which they once plan overfraes and are then able to work exactly in depth up to approx. +/- 0.02mm. All CNC portal fraes machines are supplied with coloured energy chains on all axes due to the improved cable ...

Specifications / Technical Data S-1000 CNC-Router and CNC-Engraver This is the biggest machine of our High-Z cnc-router series. With external dimensions of approx. 1350x800mm it is still very handy. With the High-Z 3D-cnc-routers you purchase an allround talent in TÜV-certified quality. If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc-machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed). Or if you simply want to do engraving- or drillingjobs.you can work on a flat surface, with a pieces of sheet MDF fixed to it. Plane it once and you will be able to work with a precision of +-0,02 mm depth. All cnc-machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc-milli ...

Important and outstanding design features of the RaptorX-SL with steel substructure / The range of applications of a RaptorX-SL CNC Machine is variable due to the high-adjustable working area (read-through under bridge variable : 150mm, 300mm or 400mm ) and the 300mm travel height in the Z-axis (no extra charge) extremely large. special groesmes up to 17,500 mm (at one scale) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-parts. Use the system as a plasma cutting system or water jet cutting system, corresponding extensions are available. In the middle range of the machine (between the foottubes ) you can even process parts up to a height of 850mm (beam shrare etc. ) or 3D body up to about 400mm height ( at 400mm long Fraeser ) ...

Specifications / Technical Data S-400 Fraes machine / engraving machine With the High-Z CNC-Fraes.- and engraving machine you acquire an all-round talent in TUeV-certified quality (EMC). Whether you want to clamp complex parts on a groove table or, or put factory tins in a high vice (the machine is on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be machined). or simply want to do engraving or drilling then they simply work on a flat base, on which they then attach e.g. an MDF plate, which they once overfrave plan and are then able to work up to approx. +/-0,02mm exactly in depth. All machines are supplied with coloured energy chains on all axes due to improved cable guidance. Furthermore, all machines are protected with a double-secured emergency exit button. Another is located directly at the controller. Basic equip ...

Item condition: New. Machine is delivered pre-assembled and tested! Specifications / Specifications S-720/T CNC-Fraesmaschine and G raviermaschine / Fraese With the T-variant of the High-Z CNC Fraes.- and engraving machine you acquire old-fashioned technology with the certain I-Tpfelchen in TUeV-certified quality (EMC). The High-Z/T CNC-Fraese is designed for even more accuracy (repeatability about 0.01mm ) and especially for higher travel speeds. The high-Z/T CNC-Fraese achieves fantastic accuracy and an almost unmeasurable reverse play of about 0.01mm due to the ball's circulation spindles. At the same time, high travel speeds of up to 108mm/second ( 6500mm/ minute) can be achieved. This allows engraving and feeding speeds of up to approx. 4500mm/min and express ingess esons up to approx. 7000mm/min. Here you can watch a video of empty journeys with the new High-Z/T. This i ...

Specifications / Technical Data S-720/T CNC-Engraving-Machine / Milling machine / CNC-Router With the purchase of the T-variation of High-Z CNC-router you get a proven technology with a certain icing of the cake in german TÜV-certified quality. High-Z/T 3D-cnc-engraver was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T cnc milling machines achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this cnc-machines you're able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. Here's a video on a unloaded drive with the new High-Z / T. This cnc-machine series is usable in the indus ...

The range of applications of a RaptorX-SL CNC Fraes machine is extremely large due to the maximum adjustable working area (read-through under bridge variable: 150mm, 300mm or 400mm ) and the travel height of 300mm in the Z-axis (at no extra charge). special large foods up to 17,500 mm ( at one scale ) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-parts. Use the system as a plasma cutting system or water jet cutting system, corresponding extensions are available. In the middle range of the machine (between the foottubes ) you can even process parts up to a height of 850mm (beam shrare etc. ) or 3D body up to about 400mm height ( at 400mm long Fraeser ), wherein this is rather unpromising due to the mostly applied layer structure  ...

The range of applications of a RaptorX-SL CNC Fraes machine is extremely large due to the maximum adjustable working area (read-through under bridge variable: 150mm, 300mm or 400mm ) and the travel height of 300mm in the Z-axis (at no extra charge). special large foods up to 17,500 mm (on one scale) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-coerpers. Use the system as a plasma cutting system or waterjet cutting system, corresponding extensions are available. In the middle range of the machine (between the footpipes ) you can even process parts up to a height of 850mm (beam shroughl, etc. ) or 3D body up to about 400mm height (at 400mm long Fraeser ), which is usually applied layer construction for large volume components in 3D mold ma ...

GranitoGrav photo-gravusystem for granite/tombstones and glass (also suitable for glazes and bottles) The CNC unit for photo engraving in stone and glass. The CNC-Fraesmaschine Series High-Z/S-400T with CNC module GranitoGrav incl. Software at a sensational price. Whether on gravestones, commemorative plaques, tiles, glass, mirror glass ... Load colour photos or photos in black and white into the CAD-CAM ConstruCAM 3D software via the specially developed module. You can then enter the output of the desired size and have milling paths calculated. This created file is opened in the machine's control software and therefore sent to the machine. - More is not necessary! It's really easy ! No programming skills are required ! The CAM software works out your data in a practical and short time and thus creates first-class photos in all the above-mentioned materials with the CNC machin ...

GranitoGrav photo engraving system for granite/gravestones and glass (also suitable for glasses and bottles) The CNC unit for photo engraving in stone and glass. The CNC milling machine series High-Z/S-400T with CNC module GranitoGrav including software for the sensational price. Whether on tombstones, Memorial plaques, tile, glass, mirror glass... You simply load your color.- or black and white photo in the CAD-CAM software ConstruCAM-3D ( all software is switchable in english language ) in the module specially developed, specify the output of the desired size and let the milling paths are calculated. This file will be ready to open in the machine software and sent to the machine! It is really easy! No programming skills are required to do so! Software provides all Windows systems ! The CAM software works off your data accurately and in a very short time and created excell ...

GranitoGrav photo-gravusystem for granite/tombstones and glass (also suitable for glazes and bottles) The CNC unit for photo engraving in stone and glass. The CNC-Fraesmaschine Series High-Z/S-400T with CNC module GranitoGrav incl. Software at a sensational price. Whether on gravestones, commemorative plaques, tiles, glass, mirror glass ... Load colour photos or photos in black and white into the CAD-CAM ConstruCAM 3D software via the specially developed module. You can then enter the output of the desired size and have milling paths calculated. This created file is opened in the machine's control software and therefore sent to the machine. - More is not necessary! It's really easy ! No programming skills are required ! The CAM software works out your data in a practical and short time and thus creates first-class photos in all the above-mentioned materials with the CNC machin ...

GranitoGrav photo engraving system for granite/gravestones and glass (also suitable for glasses and bottles) The CNC unit for photo engraving in stone and glass. The CNC milling machine series High-Z/S-400T with CNC module GranitoGrav including software for the sensational price. Whether on tombstones, Memorial plaques, tile, glass, mirror glass... You simply load your color.- or black and white photo in the CAD-CAM software ConstruCAM-3D ( all software is switchable in english language ) in the module specially developed, specify the output of the desired size and let the milling paths are calculated. This file will be ready to open in the machine software and sent to the machine! It is really easy! No programming skills are required to do so! Software provides all Windows systems ! The CAM software works off your data accurately and in a very short time and created excell ...

GranitoGrav photo-gravusystem for granite/tombstones and glass (also suitable for glazes and bottles) The CNC unit for photo engraving in stone and glass. The CNC-Fraesmaschine Series High-Z/S-400T with CNC module GranitoGrav incl. Software at a sensational price. Whether on gravestones, commemorative plaques, tiles, glass, mirror glass ... Load colour photos or photos in black and white into the CAD-CAM ConstruCAM 3D software via the specially developed module. You can then enter the output of the desired size and have milling paths calculated. This created file is opened in the machine's control software and therefore sent to the machine. - More is not necessary! It's really easy ! No programming skills are required ! The CAM software works out your data in a practical and short time and thus creates first-class photos in all the above-mentioned materials with the CNC machin ...

GranitoGrav photo engraving system for granite/gravestones and glass (also suitable for glasses and bottles) The CNC unit for photo engraving in stone and glass. The CNC milling machine series High-Z/400-T with CNC module GranitoGrav including software for the sensational price. Whether on tombstones, Memorial plaques, tile, glass, mirror glass... You simply load your color.- or black and white photo in the CAD-CAM software ConstruCAM-3D ( all software is switchable in english language ) in the module specially developed, specify the output of the desired size and let the milling paths are calculated. This file will be ready to open in the machine software and sent to the machine! It is really easy! No programming skills are required to do so! Software provides all Windows systems ! The CAM software works off your data accurately and in a very short time and created excelle ...