quality used for sale

Ground precision ball screw, Ex-Cell-o, D63mm, 2205mm, Steinmeyer, mint condition As good as new in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a major car manufacturer, has been in stock since 1999, is completely as new and in the original packaging. Attention: We have many, in stock, high quality ball screws in different versions in the diameters 32, 40, 50, 63 and 83mm. Please have a look at our website of IPV GmbH. Ball screw, Type 1516.187/10.63.1938.2205, D63 mm, 2205 mm, Fa. Steinmeyer Ball screw diameter 63 mm, Pitch 10 mm, Length of thread 1938 mm Length of ball screw nut 152 mm, Max. total stroke 1786 mm, Total length of the spindle 2205 mm Diameter for coupling with motor 38 mm Diameter bearing seat A 50 mm, bearing seat B 35 mm Functional guarantee! We cannot provide a conventional guarantee  ...

Ground precision ball screw, D40x20, 1600mm, Rexroth, new As good as new in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer, is completely as new and in the original packaging. Attention: We have many, in stock, high quality ball screws in different versions in the diameters 32, 40, 50, 63 and 83mm. Please have a look at our website of IPV GmbH. Ball screw, Type 1586-4-7212, D40 x 20/25, 1600 mm, Fa. Rexroth, Ball screw diameter 40 mm, Pitch 20 mm, Length of thread 1415 mm Length of ball screw nut 87 mm, Max. total stroke 1328 mm, Total length of the spindle 1600 mm Diameter for coupling with motor 24 mm Diameter bearing seat A 30 mm, Diameter bearing seat B 28 mm Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give y ...

Ground precision ball screw, Honsberg, D40x10/60, 1190mm, Eisenmann, new As good as new in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer, is completely as new and in the original packaging. Attention: We have many, in stock, high quality ball screws in different versions in the diameters 32, 40, 50, 63 and 83mm. Please have a look at our website of IPV GmbH. Ball screw, 20060158, D40x10/60, Fa. Honsberg, Ball screw diameter 40 mm, Pitch 10 mm, Length of thread 885 mm Length of ball screw nut 160 mm, Max. total stroke 725 mm, Total length of the spindle 1190 mm Diameter for coupling with motor 32 mm Diameter bearing seat A 35 mm, Diameter bearing seat B 30 mm Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a ...

Ground precision ball screw, Ex-Cello, D63x10/8, 1278 mm Eisenmann, new As good as new in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer, is completely as new and in the original packaging. Attention: We have many, in stock, high quality ball screws in different versions in the diameters 32, 40, 50, 63 and 83mm. Please have a look at our website of IPV GmbH. Ball screw, Type Ex-Cello D63x10/8, 1278 mm, 20130162, Z-Nr. 91.741.3-1, Fa. Eisenmann, Ball screw diameter 63 mm, Pitch 10 mm, Length of thread 1011 mm Length of ball screw nut 168 mm, Max. total stroke 843 mm, Total length of the spindle 1278 mm Diameter for coupling with motor 38 mm Diameter bearing seat A 50 mm, Diameter bearing seat B 35 mm Functional guarantee! We cannot provide a conventional guarantee and warranty for s ...

Ground precision ball screw, D40 x 10 mm, 1190/854 mm, Eisenmann, new As good as new in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer, is completely as new and in the original packaging. Attention: We have many, in stock, high quality ball screws in different versions in the diameters 32, 40, 50, 63 and 83mm. Please have a look at our website of IPV GmbH. Ball screw, Type 20180323, D40 x 10 mm, 1190/854 mm, Z-Nr. 5-1400-0087, Fa. Eisenmann Ball screw diameter 40 mm, Pitch 10 mm, Length of thread 870 mm Length of ball screw nut 160 mm, Max. total stroke 710 mm, Total length of the spindle 1190 mm Diameter for coupling with motor 32 mm Diameter bearing seat A 35 mm, Diameter bearing seat B 30 mm Functional guarantee! We cannot provide a conventional guarantee and warranty for second ...

Ground precision ball screw, 990393, D63x10/8, 1290mm, Honsberg, new As good as new in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer, is completely as new and in the original packaging. Attention: We have many, in stock, high quality ball screws in different versions in the diameters 32, 40, 50, 63 and 83mm. Please have a look at our website of IPV GmbH. Ball screw, Type 990393, D63x10/8, Fa, Honsberg, Ball screw diameter 63 mm, Pitch 10 mm, Length of thread 985 mm Length of ball screw nut 168 mm, Max. total stroke 817 mm, Total length of the spindle 1290 mm Diameter for coupling with motor 40 mm Diameter bearing seat A 45 mm, Diameter bearing seat B 54 mm Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a f ...

Ground precision ball screw, 80270, D50mm, 1300mm, Honsberg, new As good as new in original packaging! The high-quality part comes from a spare parts warehouse of a mechanical processing of a large automobile manufacturer, is completely new and in the original packaging. Attention: We have many, bearing, high-quality ball screws in different designs in diameters 32, 40, 50, 63 and 83mm. Take a look at our website of IPV GmbH. ball screw, ball screw, ball roller spindle, Type 80270, D50 mm, 1300 mm, Fa. Honsberg, ball screw diameter 50 mm, pitch 10 mm, Thread length 1080 mm length of ball screw nut 142 mm, total stroke 938 mm, Total length of the spindle 1300 mm Diameter for coupling with motor 30 mm Diameter bearing seat A 35 mm, diameter bearing seat B 35 mm Functional guarantee! For second-hand parts, we cannot provide a conventional guarantee and warranty. Howe ...

Ball bearing linear guide with 3 carriages, SHS55LC3DDHHC0-1140LP, THK, new As good as new in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer, is completely as new and in the original packaging. Attention: We have many, in stock, high quality ball screws, sychron motors and linear guides in various designs. Please have a look at our website of IPV GmbH. Linear guide with ball chain type SHS55LC3DDHHC0-1140LP from THK consisting of: -1 pc. Guide rail 55mm x 1140mm long - 3 pcs. Carriage SHS55LC Function guarantee! For second hand parts, we can not provide conventional warranty and guarantee. However, we give you a functional guarantee. If the device does not work in the course of commissioning, you can return the goods and we will refund the purchase price.

Ball-bearing linear guide with 2 carriages, MR55-A2-1244-22-22-G1-V3-GP, Schneeberger, as good as new As good as new in original packaging! The high-quality part comes from a spare parts warehouse of a mechanical processing of a large automobile manufacturer, has been in stock for some time, is completely new and in the original packaging. Attention: We have many, bearing, high-quality ball screws, synchronous motors and linear guides in different designs. Take a look at our website of IPV GmbH. Linear guide with ball chain type MR55-A2-1244-22-22-G1-V3-GP of Schneeberger consisting of: -1 guide rail 55mm x 1244mm long - 2 pcs. guide car MR55-A2 Functional guarantee! For second-hand parts, we cannot provide a conventional guarantee and warranty. However, we give you a functional guarantee. If the device does not work during commissioning, you can return the goods and we ...

The Townsend 9000 is a feature packed derinder that is safe, reliable and precise suitable for medium and small production plants, butcher shops etc. Equipped with a belt with width of 510 mm. This high quality derinder yields the efficiency and stability required by customers. Whole construction made of stainless steel wich ensures the highest quality and ease of maintenance. Total dimensions: L:2150 x W:950 x H:2000mm Inlet: width 510cm x height 120 mm. Working width: 510 mm, Throughput: 1600-1800 pieces/hr of pork bellies and flat backs Output: 1300 – 3200 kg/hr

PLASMA PLOTTER MODEL MTX 2000/6000 Construction: steel+aluminium Working field: 6200/2200/1400 XY axis drive double-sided gate drive: 4Nm stepper motors with ratios, gear strips accuracy class 8 Z-axis drive: ball screw stepper motor double aluminum beam with a special cross-section ensures rigidity, service life Travel speed: up to 25m/min Z-axis control system: THC My plasm system Linear guides: TBI, Automatic material detection system Power supply: 240V Permissible load: 3000kg Total weight: 2500kg USB port for opening projects and transferring files using external pen-drives Sheet metal detection system THC Cutting Height Control System Rope guides TBI Double-sided gate drive: X-axis stepper motor and gear strips accuracy class 8 Y-axis stepper motor and gear strips accuracy class 8 Z-axis stepper motor and ball screw Drives implemented with TBI 20 ra ...

Stock No.: 503129 Manufacturer: ARBURG Type: Allrounder 370 C 800-350 Control: Selogica Year of construction: 2002 Operating hours: 65000 h Technical data closing page Clamping force: 800 kN Holmass v: 370 mm Holmass h: 370 mm Panel size h: 570 mm Panel size v: 570 mm Installation height min.: 250 mm Plate pitch max.: 750 mm Opening distance: 500 mm Ejector stroke: 175 mm Ejector force: 40 kN Centering movable plate D: 125 mm Centering fixed plate D: 125 mm Technical data spray side Screw diameter: 35 mm Displacement: 139 cc Spray pressure: 2500 bar Screw length: 23 l/d Screw stroke: 150 mm Screw speed: 57 min Screw torque: 560 N Number of heating zones: 4 Nozzle travel: 300 mm Dimensions & Weight Machine dimensions LxWxH: 4.24m x 2.45m x 2.1m Total weight: 3460KG Equipment On-screen text german Compact Flash Drive Core pull hydraulic 2x Air ...

Rotor Ø: 340 mm Working width: 410mm Motor power: 11-18.5 kW Rotor cutting strips: 5 Stator cutting strips: 2 Insertion opening: approx. 410 x 340 mm Capacity depending on plastic and screen size: approx. 130-400 kg/h Granulate conveyor: 1.1 kW Net weight: approx. 1640 kg Gross weight: approx. 1865 kg Box dimensions: approx. 2.2 x 1.7 x 1.6 m Feed belts with silencer Centre distance: 3700 mm Belt width: 400mm Net weight: approx. 296 kg Gross weight: approx. 430 kg Box dimensions: approx. 0.8 x 0.8 x 4.4 m - Overhaul in 2022 - Real bevel cut - Integrated sound insulation - Conveniently designed grinding room - Safe material acceptance - Optimum granulate quality - Built-in granulate conveyor system - Easy maintenance and cleaning - Tested occupational safety Ø of rotor: 340 mm Useful width: 410mm Motor output: 11-18,5 kW Rotor blades: 5 Stator blades: ...

General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 100 mm - B-axis ±110° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 5 bar; 20l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor - USB interface, Ethernet interface; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmTurning diameter500 mmMax. Turning Length750 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmC-Axis Speed-5000 rp ...

RUIAN KODA MACHINERY ENG-500 film glove production line, built in China in 2020, is designed to produce high-quality double-layer film gloves that are used in e.g. grocery shops or in production. The high-quality steel construction of the automatic glove making machine ensures high stability even at maximum production speeds of up to 500 gloves per minute. The film glove production line uses moulds to produce disposable film gloves with a maximum length of 400 mm and a width of 300 mm, providing effective protection against viruses and bacteria. The 2.2 kW YASKAWA servo drive, which controls the entire process, ensures high precision in feeding the material to the sealing position and the sorting point of the final product. The ENG-500 film glove making machine also allows the production of other film products, such as breakfast pouches, after changing the heat sealing dies. The au ...

BYSTRONIC BYSTAR 3015 4.4 kW laser, manufactured in Switzerland in 2012 is designed for cutting metal sheets made of black steel, stainless steel and aluminium. Workpieces with a maximum thickness of 25 mm (black steel), 20 mm (stainless steel) or 12 mm (aluminium) are machined with the highest precision and quality, using a 4.4 kW laser beam emitted by a reliable BYSTRONIC ByLaser 4400 laser source. The laser cutting machine is characterised by a large working area made of high-quality steel, with a length of 3000 mm and a width of 1500 mm, allowing for easy loading of workpieces with a maximum weight of 890 kg and ensuring high stability during the cutting process. The machine is controlled via an arm-mounted control panel with installed BYSTRONIC ByVision numerical control. The laser has been continuously repaired – the following components have been replaced during the use of ...

Manesty ? ACCELA COTA Coating machine Model 150 (45 inch) This high quality coating equipment, designed to cover a wide range of production batches from medium scale to large scale, has an unbeatable combination of a very efficient coating process coupled with a high rate of return on investment. Innovative science based developments in the four key areas of; tablet mixing, spraying, drying efficiency and control system technology, guarantee that the XLTMCota provides a very effective solution to obtaining a highly controlled process, ensuring the delivery of high quality end product. Interchangeable baffles to suit all processes A range of three baffles to suit different applications are offered. Oystar Manesty identified the product movement in the coating pan to be a key attribute in reaching optimal coating efficiency. Baffles can be easily removed and interchanged. Efficient CIP sy ...

Figure shows MIOTAL® TC 180 x 1000 Center width: 750 mm Center height: 165 mm Orbit diameter over bed: Ø 330 mm Bed width: 190 mm Travel cross slide: 160 mm Travel upper carriage: 90 mm Spindle connection: DIN 55029 (Camlock) D 1 - 4 Spindle bore: Ø 40 mm chuck diameter: Ø 200 mm Spindle speed, infinitely variable: 30 - 2000 rpm Mechanical counters: 3 Motor power: 2.2 kW Longitudinal feeds Z: (40) 0.044 - 1.96 mm/rev Feed rates X: (40) 0.022 - 0.98 mm/rev Thread Metric: (32) 0.4 - 7.0 mm Thread inch: (32) 4 - 56 gg/inch Thread module: (32) 0.4 - 7,0 Diametrical thread: (32) 7.5 - 112 Quill diameter tailstock: Ø 40 mm Inner cone of the quill tailstock: MK 3 Quill stroke: 100 mm Lateral adjustment: ± 10 mm Weight, approx.: 650 kg Characteristics: - Acceptance protocol according to DIN - Precise, hardened and ground guides - Robust headstock with circula ...

Center width: 1000 mm Center height: 178 mm Orbit diameter over bed: Ø 356 mm Bed width: 190 mm Travel cross slide: 160 mm Travel upper carriage: 90 mm Spindle connection: DIN 55029 (Camlock) D 1 - 4 Spindle bore: Ø 40 mm chuck diameter: Ø 200 mm Spindle speed, infinitely variable: 30 - 2000 rpm Mechanical counters: 3 Motor power: 2.2 kW Longitudinal feeds Z: (40) 0.044 - 1.96 mm/rev Feed rates X: (40) 0.022 - 0.98 mm/rev Thread Metric: (32) 0.4 - 7.0 mm Thread inch: (32) 4 - 56 gg/inch Thread module: (32) 0.4 - 7,0  Diametrical thread: (32) 7.5 - 112  Quill diameter tailstock: Ø 40 mm Inner cone of the quill tailstock: MK 3 Quill stroke: 100 mm Lateral adjustment: ± 10 mm Weight, approx.: 750 kg Characteristics: - Acceptance protocol according to DIN - Precise, hardened and ground guides - Robust headstock with circulating oil lubrication, precision-be ...

working area: 1 - max. 6 mm rated capacity: 10 kVA quality: auf Fahrgestell quality: mit Nachglüheinrichtung grinding stone: . shears: . : 380 V, 50 Hz The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

We offer high quality 3S formwork panels with melamine resin coating. Only while stocks last! SFS plus 3-layer panels 200cm/50cm 21mm and 250cm/50cm 21mmnew a 18,50€ / m² from 100m² European origin product Top quality, numerous inserts per page possible. Excl. VAT + Transport Subject to sale They offer on 1 m² Stock on request For questions 0049 176 70044689 Mr. Becker Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Office/ warehouse address: Birkenstrasse 15 89185 Humlangen- Hüttisheim Register court Ulm: HRA722943 VAT ID NO.: DE279047055

Our range also includes the SMG73 polishing grinding machine, which provides a powerful solution for grinding and polishing various materials such as wood, metal and plastics. The machine has a size of 1.75 m length, 0.75 m width and 0.73 m height and a 5.5 hp engine with a power supply of 380 volts. The spindle speed can be adjusted in three stages of 1400, 1700 and 2200 rpm. Thanks to its robust design and high-quality workmanship, the SMG73 is a durable and reliable investment for anyone who needs a powerful grinding and polishing machine. We offer fast delivery directly to your home so you can start working quickly and easily. Contact us today for more information or to place your order. ---------------------------------------------------------------------- ---------------------- Our range also includes the SMG73 polishing and grinding machine, which provides a powerful solu ...

VISION WIDE VB-2016 5-AXIS CNC gantry milling machine was manufactured in 2013 in Taiwan. The machine performs precision machining of heavy workpieces in three or even five axes, once the automatic swivel head is mounted to the vertical spindle. The machine’s top-quality cast-iron structure is rigid and resistant to bending stress, thus perfectly dampening the vibrations and oscillations generated during machining. The VISION WIDE VTEC VB 2016 CNC gantry milling machine centre is equipped with safety guards fitted around the entire machine with sliding doors that open flush with the X-axis travel. Inside, there is a large work table with a length of 2000 mm and a width of 1300 mm, which is supported along the entire length of the longitudinal travel and guided by two sliding guideways, making it possible to machine heavy workpieces even when the table is unevenly loaded. Two scre ...

Machine Mechanics & electrics completely overhauled & repainted by an expert 6 months warranty Properties: + Stationary machine, very robust & stable construction + Machine is set in motion by switch-on lever, one-hand operation + with effective cut-off + Cleaning position to the rear with hand crank + even division of the dough, excellent rounding of the dough pieces + Partial knife / cutter head has been overhauled / recoated + Machine was completely disassembled, mechanically & electrically overhauled, repainted + Transmission parts run constantly in an oil bath + complete overhaul in our workshop, according to German quality standards + only high-quality original parts are installed + Machine was finally tested with dough by master baker Standard equipment: + incl. 3x knitting plate, new Special equipment, available at extra cost: + Chassis for Fortuna Automat ...

Roll press / dough dividing and warp knitting machine / Klievmaschine Machine Mechanics completely overhauled & repainted by the expert New installation of the entire electrical system, according to the latest standards 6 months warranty Properties: + Stationary machine, very robust & stable construction + Machine is set in motion by switch-on lever, one-hand operation + Cleaning position electric, to the rear, with switch + even division of the dough, excellent rounding of the dough pieces + equipped with active cut-off, for square dough pieces + Partial knife / cutter head has been overhauled / recoated + completely disassembled, mechanically overhauled, repainted + New installation of the entire electrical system, according to the latest standards + Transmission parts run constantly in an oil bath + complete overhaul in Babenhausen, according to German quality stand ...

Machine Mechanics & electrics completely overhauled & repainted 6 months warranty Properties: + Solid construction + mobile machine, on height-adjustable feet, with fixed boiler + Stainless steel boiler and lifting arm + with flour dust hood, automatic switch-off when lifting + simple and pleasant control via control box + with 2 new DIOSNA timers for 2 speeds + manual operation / automatic operation switchable via push button + complete overhaul in our workshop, according to German quality standards + only high-quality original parts are installed + Machine was finally tested by our master baker Specifications: - Flour capacity: max. 75 kg - Dough capacity: max. 120 kg - Boiler volume: approx. 180 litres - Motor power: 6.9 kW - Power loads: 380V - 3Ph - 50Hz - Fuse: 16A CEE plug - Dimensions (lid closed): 86 x 93 x 112 cm (WxDxH)

Valonkone Debarking Machine VK450 Year of construction: 1987 ( current photos coming soon - only sample photo ! ) Debarking diameter (mm) 80 - 480 Min. trunk length (m) 2,2 Weight (kg) 13.500 Motor: Rotor (kW) 55 Engine: Feed unit (kW) 3x11 Refurbished / workshop tested Valonkone debarking machine: The renovation process essentially includes: - Mending the sheets, replacing recesses - Check rotor bearings, check knife axes and partially repair them. - Order bearings and wear parts (cardan shafts). - Repairing tables and attaching new plates to the edge strips, in some cases new conveyor chains. - New straps - Check and repair geared motors. - New control cabinet - Partial sandblasting or rust removal and re-priming The VK450 debarker was the first of the "new generation" of VK debarkers, followed by the VK600 and VK800 models. It quickly became the most sought- ...

Other Info: 1 Hardened Steel Nozzle High temperature hardened steel nozzle enables advanced material usage and quality results. Advanced auto leveling and calibration insures high precision accurate parts. Heated Chamber Ensure Excellent Print Quality The heated chamber keeps the printing temperature constant for excellent performance on complex geometries. High Performance Dual Extrusion The high performance dual extruder allows for use of advanced materials like PETG, ABS, PLA, Tough PLA and of course water-soluble support material. Double Capacity Supports Large-area Continuous Printing without Interruption Two 3kg rolls capacity extends ease of use and change over intervals. Y tube connector can replenish the filament immediately if ran out of the filament from one side.   Fused Filament Fabrication (FFF) It is a 3D printing process that uses a continuous filament ...

Boiler capacity: 270l; Volume flow rate: 680l/min; Motor power: 5.5 kW; Refrigerant dryer: Yes; DESCRIPTION The two-stage compression 2-cylinder high-performance unit achieves a very low speed, resulting in particularly smooth and low-vibration running This ensures a longer service life due to less wear and Large fan wheel and a cooling air deflector on the cylinder for optimal compressor cooling Aftercoolers with cooling fins and intercooler to the aftercooler ensure a low tank inlet temperature and thus less moisture in the compressed air quality electric motor with high tightening torque electric motor equipped with motor protection switch With high-quality CONDOR pressure switch Equipped with a pressure gauge for tank pressure and a ball valve on the compressed air tank Compressed air tank equipped with safety valve, tank pressure gauge and condensate drain tap Ten years warrant ...

The KUKA KPC4 industrial robot from 2014 is a high-quality and powerful solution for industrial applications. This robot provides precise and reliable movements to perform various tasks in manufacturing or automation. The robot is in very good condition and has been carefully maintained. For further information on technical details and properties, please refer to the attached images. There you will find all relevant information, such as working range, load capacity and other specific features. If you would like more information about this industrial robot or have specific questions, please do not hesitate to contact us. Our team will be happy to assist you and answer your inquiries promptly. We are confident that we can come to an agreement on the price. Please do not hesitate to contact us for more information and possible negotiations. Please note that additional details an ...

The YCSA 08 TP air conditioner, manufactured by York, is an efficient solution for regulating room temperature. With its dimensions of 1120x43x90 cm, it fits easily into different environments. The air conditioner has a nameplate with detailed technical data that contains all relevant information. The device is ideal for use in homes, offices or other indoor spaces and ensures pleasant temperatures during the hot summer months. With York quality, you can rest assured that the air conditioner will be reliable and durable. Please note that not all items are immediately available online, as we receive new items every week. If you are interested in this particular air conditioner or need more information, please feel free to contact us. The price from the warehouse is available on request. ---------------------------------------------------------------------- ----------------------- ...

ERFURT PKZZ 315 double column press manufactured in 1984 in Germany is used for, among others, cutting, machining, bending and punching sheet metal and strip metal. Features such as the ability of extensive workpiece machining, a large work table and a 315-tonne operating slider make the crank press ideal for mass production of things such as washing machine parts, agricultural machinery or other types of vehicles. The ERFURT mechanical press is also distinguished by its high-quality welded steel construction, ensuring excellent stability during the production process. The machine uses a slider with a beam ejector, which is adjustable within a range of 400 mm via a motor reduction gear with overload protection. In order to increase the life of the tools and the quality of the parts produced, the 2500 mm long and 1400 mm wide work table has been equipped with hydropneumatic cushions.  ...

Puranity PU 20 in complete working order but needs new filters. Intended use Increasingly sophisticated technologies, continually lower detection limits in laboratory analysis, and the requirement for biologically-pure water in research correspondingly require the water used to be of ever higher quality. The novel Puranity PU 20 line of water purification systems has been developed to produce such ultrapure water, as well as to fill the needs for userfriendly systems and complete solutions Puranity PU 20 ultrapure water systems produce salt-free, organically-pure particle-free and sterile filtered ultrapure water. To make full use of the long and economical service life of the high-quality purification media, the feedwater for Puranity PU 20 systems must be pretreated by an appropriate purification step (reverse osmosis, ion exchange or distillation. Application areas - An ...

The RHEON CUP ROUNDER SR002 cylinder rounder forms various types of dough pieces into a round shape. By combining a two-row divider and a cylinder rounder, additional possibilities for producing round products with a quality comparable to manual processing are achieved. Features and benefits of the machine: Maximum capacity of 2200 pieces per hour (2 rows of 1100 pieces per hour). Weight range 50-120g. Machine made of the highest quality food grade materials. Call us for a demonstration!

Power: 1.1kW; Drilling capacity steel / continuous drilling capacity: 30mm / 25mm diameter; Speed range: 120 - 1810 rpm; RPMs: 9; Spindle mount: MK-4; Drilling stroke: 120 mm; Spindle projection: 254 mm; Table size: 475 mm x 425 mm; Tilt / rotate drilling table sideways: 45Â left / 360Â; Column diameter: 80 mm; Quick-release chucks: 1 - 16 mm; Weight: 132 kg; Industrial motor User-friendly safety switch according to IP 54 Digital drilling depth and speed display integrated in the housing Separate emergency stop impact switch Precision spindle bore Safety electrical system in 24 V DC voltage Guaranteed concentricity less than 0.02 mm measured in the drill quill Drilling spindle with precision ball bearings High-quality high-speed drill chuck Drilling depth stop Precision-crafted, stable drill table with diagonal T-slots and circumferential cooling water channel V-belt cover ...

Essilor SLE 60 slit lamp: -High quality slit lamp in excellent condition - Manufacturer: Essilor -Type: SLE 060 -Year of manufacture: 1999 Essilor AKE 500 Computer: - High quality keratometer in excellent condition - Manufacturer: Essilor -Type: AKL 001 / AKE 500 Refractive diopter meter: -Focus rangefinder focimeter Essilor LME 60 - Manufacturer: Essilor -Type: LME 60 Essilor diets hand grinder: - Manufacturer: Essilor FHG Heat Gun Frame Heater: - Manufacturer: Essilor -Type: FHG 001 N -Electrical data: 230 V, 51 Hz, 10 A UV tester: - Multifunctional anti-UV tester, matching lenses and for testing banknotes Essilor PD Meter - Manufacturer: Essilor -Digital CRP meter Motorized table -Adjustable height The devices are sold together! All devices are in good condition and can be tested and can be viewed on site.

plate width: 2000 mm plate depth: 1000 mm plate height: 310 mm weight: 1650 kg dimensions of the machine ca.: 2000 x 1000 x 300 mm Clamping plates - T-slot plates - panel array 2000 x 1000 x 310 mm If you have not found the size you require, you can also send us an e-mail send us an e-mail with the completed PDF form. With this we can can produce an individually manufactured panel for you. Number of grooves: 3 edge distance: 185mm groove spacing: 270mm Groove width: 28mm Casting quality HT250 Flatness less than 0,12 mm Surface machined according to DIN 876 Edge distance: 185mm Groove spacing: 270mm Groove width: 28mm Casting quality HT250 Flatness less than 0,12 mm Surface machined according to DIN 876/III The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The Cabero heat exchanger model AC/VC099EB/IN is a powerful heat exchanger designed for use in industrial applications. With a test pressure of 32 bar and an operating overpressure of 28 bar, it is able to withstand even high loads. The heat exchanger consists of a robust housing made of high-quality stainless steel to ensure high resistance to corrosion and wear. Inside, there are numerous close-fitting stainless steel tubes that ensure effective heat transfer. The AC/VC099EB/IN is a plate-shaped heat exchanger capable of achieving high heat output with low pressure drop. It can be used for a variety of applications, including air conditioning of buildings, cooling of machinery and heat recovery in industrial processes. The heat exchanger is easy to install and maintain as it has a robust and accessible frame that allows easy handling and cleaning. With its high reliability and ...

Combi sheeting machine Second-hand machine - overhauled by a specialist 6 months warranty at call Properties: + mobile combination sheeting machine + Year of construction 1999, workshop overhauled 2023 + suitable for all types of dough for rolling out and touring + equipped with new felt and linen tapes and scrapers + equipped with extendable roll-out table as an extension + all relevant parts have been refelted + with flour container + with trawl net & corrugated mat for beating dough pieces, rolls or breads + with long roll station at the bottom for all doughs for long rolling + Carrier belt for high transport (approx. 83 cm height) of the elongated rolled dough pieces + complete overhaul in our workshop, according to German quality standards + only high-quality original parts are installed + Machine was finally tested by our master baker + comes with instruction  ...

Machine overhauled & repainted by an expert 6 months warranty Properties: + mobile combination sheeting machine + for all types of dough for rolling out and touring + with circular moulder / circular actuating beam for Seewer Rondo SKO + with new felt and linen tapes and scrapers + relevant parts have been refelted + with trawl net & corrugated mat for wrapping dough rolls or breads + with long-acting station at the bottom for all doughs for long rolling + with high conveyor belt for breads + complete overhaul in our workshop, according to German quality standards + only high-quality original parts are installed + Machine has been finally tested by our master baker & confectioner Technical data SKO 63: Belt width: 615 mm Roller width: 630 mm Roller opening: 0.1 to 30 mm Synchromesh Technical data Rondex: - Rondex length: 154 cm - Insertion height Rondex: 175 c ...

Machine Mechanics overhauled & repainted 6 months warranty on mechanics Advantages: + Solid construction, perfect condition, very smooth running + immediately available + mobile machine, on height-adjustable feet, with fixed boiler + Stainless steel boiler and spiral + Flour dust cap, with automatic switch-off + with CS-03 membrane keypad with recipe programming + with infrared dough temperature measurement + Boiler left/right run + complete overhaul in our workshop, according to German quality standards + only high-quality original parts are installed + Machine was finally tested by our two master bakers + comes with instruction manual Specifications: - Year of construction: 2002 - Flour capacity: max. 75 kg - Dough capacity: max. 120 kg - Boiler volume: 180 liters - Ø boiler: 750 mm - Boiler height upper edge: 805 mm - Engine power: 8 kW (kneading spiral & b ...

AUTOMATIC PROCESS MACHINE FOR LIQUIDS FOODS, KARL SCHNELL TIPO: 250 Technical description: Machine number: 25162 Year: 2001 Two knives Nominal volume: 300L Dimensions: 1500 x 1150 x 2350 mm QUALITY HAS A NAME Customers demand equipment that meets their individual requirements and they demand machines that produce a high quality end-product at lowest possible costs. Combining these fundamental considerations with technical know-how, KS builds machines that are simple to use and extremely durable. Main application field of the B 22 is the production of low to middle viscous emulsions and suspensions. Typical applications are the production of: Soup, sauce and gravy Ketchup aund mayonnaise Fish farce Injection brine Pate and tureen As well as The reconditioning of rework The preparation of process materials, such as additives and spices for the sausage-, petfood- and processed cheese p ...

The grinding block machine from Oskar Pensel & Sohn Jserlohn is a powerful tool for professional use in workshops and industrial companies. With a robust construction and high-quality components, it offers a reliable and precise grinding solution. This grinder machine is equipped with two grinding wheels that offer speeds of 1700 and 2200 revolutions per minute (rpm). Thanks to the two independent motors, each with 2.2 hp power, you can adjust the speed to your requirements and efficiently process a wide range of materials. The machine type 764M15B is characterized by its high stability and durability. It provides a solid base for precise grinding and allows you to have precise control over the grinding process. The grinding block machine is ideal for deburring, sharpening, polishing and forming various workpieces. For further details about the grinder block machine, please do n ...

The machine for closing bottles in modified atmosphere and under vacuum has been designed and built according to the most modern and advanced technologies. All the solutions adopted are the result of research and design aimed at the construction of safe, reliable machines capable of guaranteeing high quality and production standards. The machine was built with high quality components to ensure low maintenance and a long operating life. The pipes, fittings, valves, materials, installed instrumentation comply with the F.D.A. All the machine parts, the smooth surfaces, the rounded corners have been specially designed for facilitate cleaning and sanitization. Length mm 4550 Width mm 2310 Net weight Kg 5000 Frequency Hz 50 Voltage Volt 380 Production 9000 Bottles / h (100 ml) Size Used bottles 50 / 100 ml Material bottles used: glass Steam consumption 300 Kg / hour Water  ...

ENGEL INSERT 200H/50 injection moulding machine was manufactured in 2007 in Austria. The machine with its small size and large capabilities is used for e.g. overmoulding of inserts and the joining of various materials such as glass, metal and electronics. Thanks to the combination of a clamping force of 50 tonnes and high-quality components, the injection moulding machine guarantees excellent quality of inserts and high repeatability. The machine’s sturdy, solidly built construction features a convenient and easy-to-use ENGEL CC 200 CNC controller for entering all possible process parameters, such as mould clamping force and speed. Once the parameters have been entered, the two halves of the mould are precisely closed, after which the vertical injection moulding machine ENGEL generates a high clamping force. The mould cavity is carefully filled with plastic under high pressure using ...

The machine can gently separate meat from waste components, like bones, veins, and skin. It processes fish, deboned turkey drumsticks, chicken backs, legs, wings, tails, necks, and turkey and chicken carcasses. The solid components remain outside the drum. The ratio between yield and quality can be influenced by means of adjusting the pressure roller. A flexible squeezing belt transports a product to the perforated drum, where it is pressed between the belt and drum. The soft components come inside of the drum through the holes. The solid components stay outside. Yield and quality can be adjusted using the pressure roller. Operation process with a flexible squeezing belt feeds the product to a perforated drum and presses the soft components through the holes of the drum. Capacity: up to 3500 kg per hour Voltage: 3 x 400 V Hole diameter: 2 or 5 mm

MAZAK HYPER GEAR 510 laser cutting machine manufactured in Japan in 2006, guarantees its user the highest quality laser cutting of workpieces with a maximum weight of 930 kg. The CO2 laser HYPERGEAR 510 has an indestructible construction made of the highest quality raw materials with a large working table, which ensures excellent rigidity and stability during machining. The laser cutting machine is equipped with a reliable PANASONIC YB-L400A8M5E laser source, which generates a 4 kW laser beam, as well as a large control panel with installed MAZATROL Preview CNC controller for controlling all machine functions. The MAZAK laser weighs 14800 kg. Technical data of the laser cutting machine MAZAK HYPER GEAR 510 - laser power: 4 kW - work table dimensions (L x W): 3000 x 1500 mm - feeds in X/Y/Z axis: 3070/1545/100 mm - maximum sheet metal weight: 930 kg - maximum sheet metal dimension ...

Operating hours: 1,265 h 20 packs/min Standard basic equipment - KV 600 HP online Direction of movement of the packaging line from left to right; Right-hand side Inlet and outlet belt belt, built-in: - for the automatic transfer of goods in line - Equipped with separately switched drive motors - If required, with laterally adjustable guides Film roll holder for top and bottom film: - Motor-driven support bearing block - Max. film roll diameter: 250 mm - Controlled film take-off - Centrally adjustable side guides of the film rolls Permanently heated transverse welding system: - working pneumatically; Air consumption approx. 140 NL/min. at 6 bar, dry and oil-free Machine: - Siemens S7; Simatic Touch Panel - Display of operator information, machine status and error messages - 2-fold piece counter; Hour meter Control panel - Control console for convenient set-up - Co ...

6000W Raycus The machine is fully equipped: - CYPCUT - high-end CNC with German surface - Raycus - laser source - Raytool cutting head - Interchangeable table - 1 CCD camera, 1 for indoor use -Stabilizer - Air conditioning for control cabinet - High-performance radiator - Anti-collision protection - 24 months warranty Working area (mm) 3000 x 1500; 6000 x 2000; 4000 x 2000 Max. working height (mm) 100 Effective travel X axis (mm) 3050; 6050; 4050 Y axis (mm) 1550; 2050; 2050 Z axis (mm) 100 Position accuracy X axis (mm/m) ±0.03 Y axis (mm/m) ±0.03 Z axis (mm/m) ±0.01 Repeatability X axis (mm) ±0.01 Y axis (mm) ±0.01 Z axis (mm) ±0.005 Positioning speed X axis (m/min) 120 Y axis (m/min) 120 Z axis (m/min) 30 Acceleration: X-axis: 1.5G , Y-axis: 1.5G Working table load 2000 kg Table change in sec. 20 Max Cutting Height ...

KEMPPI FASTMIG X 450 welding machine built in 2017 in Finland allows for both complex manual welding and efficient mechanised welding using the MIG/MAG method. The specially designed configuration of high-quality components delivers to its user excellent welding quality and performance, with unlimited flexibility for specialised tasks and materials. The KEMPPI FastMig welding machine is the perfect choice for professionals who value speed, precision and extensive machining capabilities. The KEMPPI semi-automatic welding machine consists of the following devices: – welding source: KEMPPI FastMig X 450 – wire feeder: KEMPPI WFX 300 – cooler: KEMPPI Cool X – 4-wheel trolley: KEMPPI PM500 Technical specifications of the MIG/MAG welding machine KEMPPI FASTMIG X 450 Power source - power supply: 3x 400 V (-15% to +20%); 50/60 Hz - maximum current (60%/100%): 450/350 A - ge ...