qnap systems used for sale

AFS 4000 Air Purify AFS 4000 Air Purify all separation and filter elements as well as with connection for cooling lubricant recirculation Air capacity:4,000 m3/h Device suction capacity Rated electrical data: 3, 380...480 V, 50/60 Hz2.68 kW, 4.1 A, Power consumption:2.2kW, operating point Weight:approx. 150kg Dimensions 800mm wide 1800mm long incl intake nozzle1050mm high Suction mares 4 pieces each approx. 200mm diameter Suction nozzle shut-off valve diameter 150mm

Thermal CTP Platesetter Manufacturer: Heidelberger/Creo Model: Trendsetter 3230 Laser new, 440 hours year: approx. 1997 Location: germany Price: on request

Make: HEBER Type: RLG-04/355 Year: 2001 Power: 8400 m3/h Current consumption: 8.4A/400V, 4.8A/690V Switch box with control via frequency inverter Price on request Contact details can be found at frigocom.at/kontakt/

SCREEN CTP PLATE RITE 4100 Manufacturer: Screen Model: PLATE RITE 4100 year 2006 with developer of plate washing device. Condition: CTP is working well. available in Jun/ July 2021 Price: on request

4 up Thermal CTP Kodak Trendsetter 400 Model: TS 8 Year: 2003 40 mW laser with Printconsole Price on request

composed of: Bagging element with 5 bags and 30 filter bags Bagging element with 4 bags and 24 filter bags Fan Schuko S-300, Y/O 2019 Suction and pressure nozzles: 300mm Volume flow: 6753m3/h 2584 Pa Voltage: 400/690 volts, 50 Hz Engine speed: 2860 rpm Protection class: IP54, pos. GR 180 Fan with engine renewed in 2019, 7.5 kW, B3, IE3, 2,950 rpm

Various control units for video and audio systems consisting of: 5 pieces Extron Amplifier XPA - two channels 100 W 1 piece Extron SW VGA - VGA/Audio Switcher 4 pieces Extron MLG 228 - media control units 1 piece FURMAN PS-SRE Series II Power Contioner + Sequencer 3 Pieces Extron MP8 Series 8 Media Presentation Switcher 4 pieces Panasonic beamer PI-F200 NTE with remote control 6 pieces 19" wooden racks 10U and more 4 pieces Fohn wall speaker Only for sale as a package

8 UP Thermal CTP Avalon N8 50 XT year 2008 250,000 plates produced MAL 4 cassettes, 2 punches bacher 425W 780W bridge Arkana 125 online-processor ethernet to PIF interface Price: on request

ASA 3303 Raw air extraction system Rated power 3260 m3/h, Filter area 2 x 3.6 m2, Power 400 V 50 Hz 1.5 kW, 2 dust bags G&STÜ-5123303

General: Built 2005 / 2004 consists of the following components: ZVA 450 Y.O.M. 2005 FZ 20,000 Y.O.M. 2004 TP-A 322 Y.O.M. 2004 Other equipment and accessories included: Control cabinet and various sliders This system was installed on two BAZ Heckert CWK630

ABS 3880 Suction system 2 sack ABS 3880 2x300L Suction capacity 3880m3/h 3x100mm 2.3 hp S1/ 3.5 hp S6

• Cutting Bridge 1 – 3x Oxy head (one broken) + 1 x 200Amp Plasma: o Year 2006 o Working area: 24m x 3150mm o Working condition • Cutting Bridge 2 – 1x Plasma Bevel Cut 360 Amp + 1x Drilling Unit with automatic lubrification o Year 2014 o Working area 30m x 3150mm o Good Condition • 2x Donaldson Aspiration Unit • 50m rails + cutting table

1903 ASA Aspirator Rated volume flow 1900 m3/h Low pressure max. 1700 Pa Filter area 1.92m2 Chip collection volume 110l Suction nozzle diameter input 203mm Suction nozzle diameter output 2x 100mm LxWxH 1000 x 500 x 2100mm Weight 39kg Engine 400V 50Hz 1.5kW G&STÜ-5128193

Pressure atmospheric maximum: 4000 bar X - axis: 3000 mm Y - axis: 2000 mm Sheet thickness: 0,00 mm Number cutting heads: 0   CNC Brand: _Unknown / Other CNC Model: Flowcut FLOW - MACH3 3020B CNC Waterjet 3000 x 2000 x 4000 Bar MACH - ID 6372 Make: FLOW Type: MACH3 3020B Control: FLOWCUT YOP: 2013 Hours: 3000 Working area X Axis    3.000 mm Working area Y Axis    2.000 mm Working area Z axis     178 mm Power resonator            4000 bar kW / Amp Feed rate X-Axis           12.700 mm Feed rate Y-Axis            12.700 mm Feed rate Z-Axis            12.700 mm Control            FLOWCUT Cutting hours     3000 H Linbear straightness a ...

SAA 902 Aspirator Fan wheel in bucket form Plastic fan wheel and housing Rated volume flow 1200 m3/h Vacuum max. 1100 Pa Suction nozzle diameter 100mm LxWxH 900 x 500 x 1550mm Weight 19kg Engine 230V 50Hz 0.55kW G&STÜ-5923902

ABS 2480 Aspirator N E U MASCHINE ! Suction system ABS 2480 400V 2 hp 300 L chip sack Suction capacity of 2480 m3/h 2 100 intake connections Weight 51 kg METAL WINGS! Driving equipment! G&HM-ABS2480

Dust Extraction Plant Manufacturer: Nestro Year: 1991 Filter unit: Filter hoses: 121 pcs.(arrangement 11 x 11) / D230 x 2600mm Filte surface 261 m2, Filter material: category G Automatic motorized vibration cleaning / 4 motors Fire-extinguishing ducts Return air system Fire damper Pipes, Pipe bends Ventilators: Ventilators 3 pcs. a 7,5 KW, D 350mm Ducting, Ducting bends, ducting shutters with chains Control unit Nestromat 3 x Transducer coils for start automatic: 15 x

Bread roll Frilado -S 200 new -Total condition of the machine is very good -400 volts -2.5 A -50 Hz

4 up thermal CTP AGFA Avalon N4-30X with L300 Platemanager year 2019 ONLY 200 plates produced Price: on request

Temperature control device Manufacturer: single Temperiertechnik GmbH Type: STO 2-9-42-01 N°: 961599 Kerb weight: 442 kg Engine power: 2 x 2.3 kW Heating capacity: 2 x 9 kW Cooling capacity: 2 x 48 700 watts new condition with operating instructions LWH: 1600 x 600 x 1400 mm

Temperature control device Manufacturer: Tool Temp AG (Switzerland) Type: TT-162E No.: 21-02064-1 with CE mark LWH: 600 x 300 x 750 mm

Temperature control device Manufacturer: gwk Type: teco cs 90 N°: 11936 Y.O.M.: 2002 Heating capacity: 9 kW Rated cooling capacity: 23 kW Maximum temperature circulating medium: 95° C LWH: 900 x 260 x 600 mm

Screw compressor system semi-thermal air conditioning compressor Compressor Chiller 2 x 30 Kw electric for air conditioning systems. 2x Screw compressor Manufacturer: RefComp Type: SRC-S-133 Ser.-No.: RE00093364 & RE00093366 400 V; 277/398 A; 50 Hz; IP54 rated power Leistg.: 30 kW Funding volume: 150 m3/h Pressure: 19-26.5 bar 3x Shell and tube condensers Manufacturer: WTK Type: CF270 CA2P Y.O.M.: 2009 272 kW (46.80 m3/h); 273 mm Tube Side: 10-11 bar; -10/+120 °C; 26.0 dm3; H2O Shell Side: 30-33 bar; -10/+120 °C; 85.9 dm3; gas with control box / control box with main switches, control & switching modules & pcd7. D232 terminal display. with piping and other various extensions, all mounted on a sturdy 4-edge dread tube frame. Total approx. 3450 x 1400 H 1900 mm Subject to changes and errors in the technical data, dates and prices as well as intermediate s ...

Cooling tower / water cooler Manufacturer Carter Environmental Engineers Type Sandrigham Serial number AQ 36068 Built June / 2006 2 x fan dia. 1500 mm Engine 380 V / 11 kW / 705 rpm 2 x centrifugal pumps Apex Type ISFC 125x100 Power 173 m3/h / H 35.36 m Engines Manufacturer WEG Type W22 Premium Power 37 kW / 2960 rpm Dimensions: LWH approx. 6,500 x 2,900 x 4,000 mm

Refrigeration unit, refrigeration system, refrigeration system, cooling compressor, refrigeration compressor used. TEKO TPX2-112 Built in 2011 compressor 2 pieces FRASCOLD Type: S 7 56 Y 56 m3/h each 380 V Dimensions approx. 1600 x 900 x 2000 mm All items are checked for function before delivery, if technically possible ! Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.

Thermal CTP VLF AGFA AGFA Avalon VLF 70 xxt Elite year 2007 with AGFA Printdrive Price: on request

1 pc. Dassler high-pressure centrifugal fan is for sale single inlet with sheet steel housing with the following performance parameters: condition: new, unused type: DCAS-852-2T-10 suction DN: 280 power: 7.5 kW air volume: approx. 4300 m3 / h speed: 2800 rpm air temperature conveyed: -20 to + 120 ° C motor: insulation class F / protection class IP55

Cooling & freezing chamber NN 2900x2200x2500 Type Cooling equipment Height 2500 Width 2200 mm Length 2900 mm

Temperature control units Manufacturer: gwk Model: teco wv Machine no: 1) S001 2) S010 3) S030 4) 567 good condition with operating instructions Control via touchpad LWH: 1300 x 320 x 950 mm 4 pieces available

Temperature control unit Manufacturer: gwk Model: teco wv good condition with operating instructions Touch panel LWH: 1100 x 330 x 750 mm

Temperature control unit Manufacturer: Lauda Type: LTH140P No.: X12217 Power: 7 kW Filling volume: 5 l Year of construction: 1999 with operating instructions

ECRM Mako 8 CTP Year 2006 Laser: Violet - 60 mW Laser head with 50 % life ( other 12 years with a production of 20-25 plates per day ) Plates: Photopolymer metal and silver plates Plate sizes : 8.9" x 9.9" (226 x 252 mm) min. to 32.4" x 45" (823 x 1143 mm) max. Speed: up to 15 plates per hour in full size DPI: 1800 - 3556 dpi, 5 resolutions Included : Online processor Mizar PV 85 Automatic stacker CT Server (Tiff Catcher) Harlequin Level 3/PC, All user manuals In production, any test possible INCLUDED ANOTHER COMPLETE CTP ECRM MAKO 8 Year 2005 WITH NEW LASER HEAD WHICH CAN BE USED FOR SPARE PARTS Location: Italy Price: on request

8 up CTP for conventional plates Basysprint 710 HS year 2000 with RIP in function incl. some Lamps as Spareparts. Located germany, available now Price: on request

Suction pipe distributors Suction pipe branch D=250 on 180 and 3x 100mm G&-4892 Special price: net 95,-€

2 Thermal VLF Systems form one place: 1. CTP machine Lotem XL 60/80 Creo, YOC 2001 similar to Creo Kodak Trendsetter VLF format 150cm x 200cm in production The imagesetter is equipped as follows: imagesetter, plate machine, plate stacker max.format 152.4 x 203.2, 0.3-0.4 thickness the smallest format is 45.7 x 38.1 The software is equipped as follows: 1 x Lotem XL 60/80 Brisque 4 Impose 1 x Solder 800V transformer 1 x Brisque Back & Front 1 x Lotem XL Singel cassette 1 x Brisque to Improof 1 x Brisque export PS b/w option 1 x EV 800 LVD w/ 8x36GB 1 x Solder XL Wide Conveyor 2. CTP machine Lotem XL 60/80 Creo, YOC 2000 similar to Creo Kodak Trendsetter VLF format 150cm x 200cm in production The imagesetter is equipped as follows: imagesetter, plate machine, plate stacker max.format 152.4 x 203.2, 0.3-0.4 thickness, the smallest format i ...

2 Thermal VLF Systems: 1 x AGFA Avalon VLF A xxt year : 2006 5000 paltes with new Laserhead AGFA VLF Platemanager with AGFA Elantrix 150 Onlineprocessorwit transit table to the oven. with Haase oven OG15FU with transit table to gum unit withGum unit RSH with explanation table Price: on request 1x AGFA Avalon VLF A xxt year : 2006 Price: on request

Ceiling filter 160 B 10x10/20/101 - motorized shaking, 0.18 kW - Filter area 100.5 m² (BGIA Cat. G) - Filter 2000 x 160 mm, 100 pcs. - Extinguishing device - Weight 520 kg - Dimensions. 1,950 x 1,970 x 2,450 mm Chip keeper SPB2020 - Volume approx. 2.7 m³ - Dimensions 2 x 2 x 990 mm - Discharge screw - Agitator - Gear motor 1.5 kW Centrifugal fan S300 F/L2 11.0 kW - Nozzle-Ø 300 mm - Vol.Strom 5.300 m³/h, 4700 Pa - Protection class IP54, pos. GR 270 Fan 7,5 KW switchboard - Star-triangle circuit 11 kW - controls both fans and 1 x motor. Shaking All information is subject to the actual equipment

Composite systems Bitzer with original capacitors Deep pond / Normal cooling -3x compressor Bitzer 4U-15Y-40P -Kaeltepower: 70 kW at -10ºC/40ºC -Volume: 3 x 73.7 m3/h -Quantity in stock: 1 piece -Kealtemittel: R404A -With original capacitors -In very good condition Price on request, We have many other cold machines : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman

Composite systems Bitzer with original capacitors Deep pond / Normal cooling -3x compressor Bitzer 4NES-14Y-40P -KaelteLeistung: 94.5 kW at -10ºC/40ºC, 47 kW at -25ºC/40ºC, 19kW at -40ºC/40ºC -Volume: 3 x 56.3 m3/h -Quantity in stock: 1 piece -Kealtemittel: R404A -With original capacitors -In very good condition Price on request, We have many other cold machines : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman

specifications: - air-cooled plasma cutter portable - Cutting current adjustable in 3 stages 20 - 60 A - Duty cycle 30 A / 100% ED - 60 A / 60% ED - max. cutting thickness - steel approx. 15 mm - Alu ca. 10 mm - Stainless steel approx. 8 mm - Pneumatic connection - Connection 400 V / max. 9 kVA - burner package - Ground cable - Space requirement approx. W 500 x H 750 x D 800 mm - Weight approx. 20 kg

Bagel Machine / Bagel Machine Weight range 8" 60-85g /// 9" 85-130g ( max. 3600 pieces/hour ). New machine

Hydraulic wood splitter, functional Details on request

: 2000 mm Working width: 360 mm Wheel width: 360 mm roll diameter: 60 mm : 800 kg height adjustment: 650 - 950 mm weight of the machine ca.: 0,045 t dimensions: 2,07 x 0,48 x 0,21 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

storage positions: 90 Boxen weight: 21 kg dimensions: 670 x 520 x 1330 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

impact length: 2000 mm Weight of Material maxium: 300 Kg/m Wheel width: 350 mm roll diameter: 60 mm work height adjustable: 840 - 950 mm weight: 73 kg length in width: 620 mm length in total: 2400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 6 St. weight: 12 kg range L-W-H: 990 x 400 x 870 mm Workshop trolley with 30 mm thick solid wood panel. Solid drawers with ball bearings (double bearings) All drawers can be opened 100%. Equipped with scratch and impact resistant powder coating. Each drawer is equipped with an anti-slip mat. All drawers are equipped with a drawer lock. The doors have a magnetic lock and lock. Tool trolley is equipped with 10 drawers and a cabinet with 2 doors. Scope of delivery: 2 x 125 mm. Heavy swivel castor with brake. 2 x 125 mm. Heavy firm roles. 1 x robust handle made of solid steel. 3 x lock for all drawers and doors. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 3000 mm Working width: 360 mm Wheel width: 360 mm roll diameter: 60 mm : 900 kg height adjustment: 650 - 1100 mm weight of the machine ca.: 0,050 t dimensions: 3,1 x 0,45 x 0,6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

storage positions: 24 Boxen weight: 25 kg dimensions: 850 x 400 x 1650 mm Dimensions of the container 26 x 40 x 16 cm. Internal dimensions of the containers 23 x 35 x 15.5 cm. MDF cover plate thickness 10 mm. PP material (polypropylene) Overall dimensions 85 x 40 x 165 cm. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

measuring length: bis 2000 mm Tube length: 2280 mm numbers of toolholders: 3 : Rohr galvanisch Verzinkt dimensions: 2,3 x 0,3 x 0,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.