q lab used for sale

Used labeling machine from Stolpe Barg in a closed housing design with privacy screen. The machine is used for the automated application of labels (contact film) to components and is designed for use in industrial production, especially in electronics and printed circuit board production. On the control side, a Mitsubishi FX3-48M PLC with expansion modules and a Phoenix Contact safety card are installed. The machine has an output of 0.5 kW at 230 V. The machine is used and shows normal signs of use. It is in a well-maintained condition and was in industrial use until recently. Scope of delivery: 1 labeler ET500S Mitsubishi FX3-48M PLC with expansion modules Control cabinet Existing machine documentation Type: ET500S Year of construction: 2009 Machine number: 1426 Power: 0.5 kW Voltage: 230 V Control: Mitsubishi FX3-48M Equipment number: 6050068 ― Length: approx. 140 cm Widt ...

The RD28L test device from RB Elektrotechnische Laboratorium Korntal is a classic protective conductor and insulation tester that was designed for safety tests according to VDE standards. Benchtop instrument for conducting protective conductor and insulation tests Designed for workshops, test laboratories and production areas Analogue display instruments for voltage and current Acoustic and visual warning signals in case of fault conditions Delivery as shown Test voltage: up to 5,000 V AC Current measurement ranges: 0–10 mA / 0–100 mA (switchable) Short-circuit current: > 200 mA Operating voltage: 230 V / 50–60 Hz Display analogue instruments Dimensions (W × D × H) approx. 505 × 340 × 200 mm Weight approx. 18–20 kg Protection class I (with protective conductor connection) Safety functions Acoustic, visual error message Auction-ID: A7-50729-93

Used laboratory drying oven from Memmert in a compact tabletop design with stainless steel housing. The device has an analogue control unit with rotary control, alarm function (on/off) and a temperature display scale. Heating chambers of this type are used in laboratory, research and industrial environments for drying, sterilising and heat treatment of samples and materials. The device is used and shows normal signs of use due to use, in particular slight soiling and marks on the side surfaces of the stainless steel housing. Scope of delivery: 1 Memmert laboratory drying oven 1 power cord Without additional accessories Device test: DGUV V3 (Apleona), next test date visible Control: Analogue, rotary control Protection class: DIN protection class 2 / 3.1 (according to the safety label) ― Length: approx. 50 cm Width: approx. 35 cm Height: approx. 45 cm Weight: approx. 20 kg Auc ...

Laboratory device for determining the osmolality of liquids, incl. accessories Measuring principle: Freezing point lowering; Power supply: 90–260 V AC, 47–63 Hz, 70 VA; Accessories: Thermal printer, 2x measuring head, cable set Semi-Micro Osmometer K-7400, SN 135815, mains 90–260 V AC, 70 VA Auction-ID: A7-50729-168

CODIMAG VIVA 340 mm Waterless Year 2001 max. width: 330mm 5 offset units waterless 1 hot foilstamping unit 1 varnishing unit 6 IST UV dryers Kocher &, Beck GapMaster Rewinder/ Unwinder Waste rewinder Inline slitter Corona pretreatment BST Web inspection

Manufacturer: CDA Model: SOLO MIX 1500 Batch type: Industrial machine Dimensions: Year: 2021 Power consumption: 2KW Supply voltage: 220V Mono Frequency: 520 Hz 16A Output: up to 20 products/minute Touch screen Compressed air consumption: 10-20 m^3/hour at 6 bar Product direction of passage: from left to right 1 accumulation table Auction-ID: A1-50725-3

\"Laboratory drying section FOGRA Hot Inv. No.: 23643, built in 1997, SN J712226, power approx. 10 kW, electrically heated\" Auction-ID: A1-50608-118

Honeywell PM45 Industrial Label Printer Industrial thermal label and barcode printer with integrated colour touchscreen, network connectivity and multiple data interfaces. Suitable for high-volume printing of identification and barcode labels. Manufacturer: Honeywell Model: PM45 Configuration: Enclosed media compartment and front label output Connectivity: Ethernet, USB and serial interfaces Ethernet MAC address: 00:10:40:DC:B2:F8 Power: External AC power adapter Condition: Used Approximate dimensions: 483 × 295 × 295 mm Approximate weight: 13 kg All descriptions are indicative only. Auction-ID: A1-50546-56

MACHINE FOR TESTING WITH COMPUTER AND ACCESSORIES. CALIBRATION CERTIFICATION CN 200

These include, precision scales, stirrers, thermometers, and miscellaneous Auction-ID: A1-50393-232

Auction-ID: A7-50858-21

Consisting of 1x Langghut/De Groot labeling machine, 1x Nordson Saturn anti-slip machine, 1x Domino CX350i 2PH, total length approximately 4300mm. Auction-ID: A1-50393-26

Equipped with a total of approximately 16 meters of 'Krones'/'Poly chain' off/off conveyor belt and batch of spare parts on 6 pallets, size of basic machine approximately 2800x2700x3300mm. Auction-ID: A1-50393-22

Equipped with Krones iPanel CD touchscreen, Krones Checkmat controller, a total of approximately 13 meters of 'Krones'/'Poly chain' off/off conveyor and batch of spare parts on 8 pallets, size basic machine approximately 2800x2700x3300mm. Auction-ID: A1-50393-5

Consisting of 1x u-shaped feed conveyor belt (L = approximately 4 meters), 1x Langghut/De Groot labeling machine, 1x Nordson Saturn anti-slip machine, 1x Domino CX350i 2PH and 1x elevator belt (length approximately 4800mm. Auction-ID: A1-50393-12

Auction-ID: A1-50393-231

Prints and applies labels to the underside of packs, The VWS LPX Blow 4/300R prints a label and blows it onto the pack from below as it runs across the belt. Useful for trays and tubs whose top has to stay clear, or when you want information on the bottom as well as a top label., The machine was built in 2014 and sits on a stand with an 800 mm belt. It runs on 230 V., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/vws-lpx-bottom-labeller/, Type: Bottom labeller (print & apply), Application: Blow applicator from below, Belt: 800 mm, on stand, Electrical: 230 V, 50–60 Hz

Prints labels and applies them straight away, This labeller prints the label as the pack arrives and then blows it onto the pack with air (blow applicator). That lets you put current data such as date, weight or lot number directly on the product. Printer and applicator hang from a column above a short conveyor and can be adjusted in height., According to the documentation supplied with the machine, it is an LPX 400 blow labeling system from Van Oers United. We did not find a rating plate with the year of manufacture., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/van-oers-lpx-400-print-and-apply-labell er/, Type: Print and apply labeller, Print method: Thermal transfer (ribbon), Application: Blow applicator (air), Construction: On column with conveyor, height adjustable

Labelling line with two print and apply stations, This VWS Nederland line has a conveyor with two labelling stations in a row. Each station has its own printer and label reel, so you can print and apply two different labels or keep running on two reels. Each station has its own display control., The control panel has start and stop buttons per station and an emergency stop. We did not find a rating plate with the year of manufacture., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/vws-nederland-labelling-line-with-two-p rinters/, Type: Labelling line with two print and apply stations, Stations: 2, each with printer and label reel, Controls: Display per station, push-button panel with emergency stop, Construction: Stainless steel frame with conveyor

Labeller that applies a label to the top and the bottom, This machine labels a pack on both sides in a single pass. The pack runs along the conveyor; the head above the belt places a label on the lid, the head below the belt presses one onto the base. A good fit for trays and tubs that need a label on each side., It is operated from a touchscreen on a column next to the conveyor. There is no rating plate on the machine, so the make and year of manufacture are unknown., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/top-and-bottom-labelling-machine/, Type: Labelling machine, top and bottom label, Label heads: 2 (above and below the belt), Controls: Touchscreen, Construction: Stainless steel frame on adjustable feet

Marel labeller for the top and the bottom of the pack, This Marel labelling machine puts a label on the top and on the bottom of a pack in one pass. Packs come in on the conveyor with adjustable guides; the head above the belt labels the lid and the head below the belt labels the base., It is operated from a touchscreen next to the conveyor. The rating plate is still on the machine, but only the Marel name can be read, so the model and year of manufacture are unknown., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/marel-top-and-bottom-labelling-machine/ , Type: Labelling machine, top and bottom label, Label heads: 2 (above and below the belt), Infeed: Conveyor with adjustable guides, Controls: Touchscreen

Description Item # 9399 - ROTARY LABELLING MACHINE Manufactured by ANKER MASCHINENBAU Model 16/4 Year 1994 400Volts, 50Hz up to 20,000 units per hour Can do Wrap Around Labels Max size 70 x 220mms 16-Head Rotary Labeller, used for Canned/Jar products

Automatic Label Applying Machine with YASKAWA Robot Automatic labeling machine equipped with a YASKAWA robot, designed for automated labeling operations in industrial environments. This installation is intended for the identification and marking of products on the production line. Very little used machine and sold complete with its robot. Features: Type: Automatic Label Applying Machine Built-in robot: YASKAWA Function: Industrial automatic labeling Configuration: sold complete with robot Condition: second-hand – machine very little used Dimensions (L x W x H): 240 x 240 x 220 cm Weight: 1,500 kg Used professional machine in very good general condition. Auction-ID: A1-50714-4008

VACUUM LIFTER FOR LABEL APPLICATION Auction-ID: A1-50766-401

VACUUM LIFTER FOR LABEL APPLICATION Auction-ID: A1-50766-402

Manter BV sewing line for packaging bags with labeller, machine code: RSB-M, machine number: 211-132, year of construction: 06-2011, machine weight: 600 kg, rubber belt, belt width: 300 mm, mesh bags width: 600 mm, seal length: 700 mm, label width: 65 mm, total dimensions: 4500 mm x 1250 mm x 2300 mm.

mobile; equipped with 2 labeling heads; Integrated conveyor belt and digital control panel Auction-ID: A1-50542-5

on stainless steel column; incl. digital readout; \"Toshiba\" label printer and \"Alup\" refrigerant dryer Auction-ID: A1-50542-19