128,876 used machines on RESALE, but how to find them? Machine Search
A CNC twin-spindle lathe Gildemeister with a Y-axis is available. Bar capacity: 32mm, tool stations: 2x12, speed main and sub-spindle: 8000rpm, control: Siemens Sinumerik 840D Powerline, operating hours: 39426h, spindle hours: 25529h. Including coolant system, tools and short bar loader 1500mm Iemca Vip 80E. Documentation available. On-site inspection is possible. Expected to be available starting end of April 2026.
Nominal width: 3000mm, Working width range: 600mm-2800mm, Layers: 1, Number of chambers: 6, Heating system: Gas, Air supply: top/bottom, Max. working speed: 100m/min, Chain arrangement: horizontal, Cooling cylinders: 2, Padder: twin cylinder Matex 6000, Exhaust fan: 1, Documentation available, On site inspection is possible.
This Gildemeister MF twin 65 was manufactured in 1996. It features two turrets, each with 12 tool positions, all motorized-capable, and includes 14 driven tools and 14 tool holders. The machine boasts both spindles in very good condition and a bar passage of 65 mm, complemented by a Cucchi Pietro bar feeder. Contact us for more information about this machine.
A flexible CNC filling system Rationator for liquid filling is available. Dosing principle: volumetric piston dosing, filling positions: 10, design: 2-phase filling, products: liquids/lotions/emulsions/cosmetic products/chemicals, filling range: 20ml-1000ml, total system length: approx. 7800mm, total system height: approx. 1650mm. Including conveyor belt and transfer station. Documentation available. An on-site inspection is possible. Expected to be available starting mid-June 2026.
This 6-axis BACCI TWIN CNC Wood Machining Centre was manufactured in 2001. It features an impressive X-axis travel of 3400 mm, Y-axis travel of 1500 mm, and Z-axis travel of 1000 mm. The machine is equipped with 4 milling heads that can reach speeds of up to 24,000 rpm and includes 2 tables and 2 vacuum units. If you are looking to get high-quality wood machining capabilities, consider the BACCI TWIN machine we have for sale. Contact us for further details.
An air-cooled monoblock water chiller Green Box for the plastics industry is available. Cooling capacity: approx. 20 injection molding machines, power: 25kW, refrigerant circuits: 2, refrigerant: R407C, cooling capacity: approx. 80kW, air flow rate: approx. 16500m³/h. Machine dimensions X/Y/Z: approx. 3300mm/1100mm/2100mm, weight: approx. 1300kg. Documentation available. An on-site inspection is possible.
â Product description âœ" Manufacturer: Rheon âœ" Model: Twin Divider VX 201 âœ" Year of manufacture: March 2004 âœ" Condition: used, cleaned, in working order âœ" Machine type Dough divider âœ" el. Connection: 3x 380 V / 0.93 kW / 50 Hz / 3.37 A âœ" Outside Dimensions: W.: 95 cm, D.: approx. 235 cm, H.: 170 cm The machine worked until recently in the bakery We picked it up, completely disassembled it and cleaned it After cleaning it we did not connect it should be checked first Partial belts must be replaced Details see pictures.
General SKU269N248 MakeBoldt Friesland engineering bv TypeBM-1500-S22L2 No.85-138 Mounted on framecheck Main Features MaterialStainless steel Volume1500 Ltr. Motor15 KW Specified Features - Ribbon blender Ribbon blendercheck Double shaftcheck Capacity1500 l Trough sizes1500 x 1150mm With covercheck Inletdia.600mm Outlet(2x) +/-500x200mm With jacketcheck With adjustable packing glandscheck Motor(2x) With variable speed drivefrequency converter MaterialStainless steel 1.4301 (304) Information LocationBarneveld With switchcheck With switchgearcheck Floor space2,6x2,0 M Total height2,6 M Weight1440 KGRibbon blendersNew arrivalsBoldt SystemsMixers > Ribbon blendersNew arrivalsBrand > Boldt Systems What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are w ...
Milling chuck, boring head, spindle head, drill head, plunge drill head, plunge head, spindle drill head, boring head, universal drill head, boring tool, face head, facing and boring heads -Manufacturer: Komet microbore twinbore, milling heads, facing and boring heads with countersinking tool -Type: various designs, see photos -Comet: Type AB/VD 80 / AB/V 63x85 / AB/FZ 63 / AB/FZ 40 / AB/FZ 25 / FZ 32-100-3 / 2x AB/ISO 40x63x50 -Comet: Type AB/VD 63 / AB/VD 40 / AB/FZ 80 / AB/V 40x60 / AB/VD 50 / AB/V 25x60 / AB/VD 25 ... -twinbore: microbore MTP-75-1 / MTP-75-80 ... -Price/Fee: complete -Dimensions of transport case: 715/365/H210 mm -Total weight: 72 kg
General SKU231Y132 MakeWam TypeDLP2035G Year of construction2010 Main Features Motor3 KW Inlet diameter100 mm Width350 mm Specified Features - Lump breaker MaterialStainless steel 1.4307 (304L) Lump breakercheck Double shaftcheck Teeth height50 mm With hoppercheck bag dumping station InletDN100 OutletDN350 with valve Motor3,0 kW (400 V, 1430 rpm) Rotor speed60 rpm Information LocationBarneveld Mounted on wheelscheck With switchcheck Floorspace1,30 x 1,25 m Total height1,70 mLump breakersNew arrivalsWamBreakers > Lump breakersNew arrivalsBrand > Wam What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
turning diameter: 100 mm turning length: 320 / 345 mm control: Siemens 840 D swing diameter: 145 mm spindle distance: 580 mm slide I:: slide I - cross travel: (X1) 220 mm slide I - longitudial travel: (Z1) 320 mm y-axis: +/- 30 mm rapid traverse: (X/Y/Z) 30/15/30 m/min slide II:: slide II - cross travel: (X2) 120 mm slide II - longitudial travel: (Z2) 345 mm rapid traverse: (X/Z) 30 m/min Subspindle:: Travel subspindle: (Z3) 380 mm vertical stroke: (X3) 145 mm bar material dia.: max. 36 mm rapid traverse: (X/Z) 20/30 m/min power capacity: (40/100 % ED) 26/21 kW spindle turning speed range: 40 - 7200 U/min total power requirement: 42 kVA weight of the machine ca.: 5,3 t dimensions of the machine ca.: m CNC turning and milling centre with Y-axis, 2 turrets, subspindle and bar feeder. A total of over 44,000 EUR has been invested in necessary repairs and maintenance over the last 5 years ...
SURFACE TREATMENT, USABLE PROCESS SPACE / ZONE length: 670 mm width: 480 mm DIMENSIONS / WEIGHTS space requirements -left/right-: 4500 mm space requirements -front/back-: 3053 mm total height: 2500 mm ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 Hz POWERJET T4-V TWIN continuous cleaning system – powerful and reliableA high-quality POWERJET T4-V TWIN industrial continuous cleaning system from renowned manufacturer LPW Reinigungssysteme GmbH is available for sale.The system is ideal for the efficient cleaning, rinsing, drying and preservation of workpieces in series and batch production.Two working chambers for high throughput and flexible processesMulti-stage cleaning, rinsing and drying process including vacuum and hot air dryingSuitable for batch weights up to 200 kgFive free ...
CNC Lathe Manufacturer: Gildemeister Type twin 42 Year of manufacture 2005 Control Siemens 840D Turning length 210mm 2 X 12-fold turret all places are powered Engine A 83700 Spindle A 50809 Machine has a defect in the pick-up spindle, probably bearing With Breuning Profimat bar loading magazine
Gildemeister Twin 32 YYear of manuf. : 2007 Control : Siemens 840 D Turning diam. : 100 mmTurning length : 580 mm____________Description:In General:Year of manufacture:2007Control system:Siemens 840 DTurning diameter:100 mmTurning length:approx. 580 mmBar capacity:32 mmMain spindle:Technology:Motorised spindleSpeed:8,000 rpmTorque max.:100 NmPower max.:26 kWC-axis:0.001°Bar capacity:32 mmClamping cylinder:Hollow clamping cylinderChuck:Hainbuch SpanntopSub spindle:Technology:Motorised spindleSpeed:8,000 rpmMax. torque:100 Nm.Max. power:26 kWC-axis:0.001°X-axis:145 mmZ-axis:380 mmClamping cylinder:Partial hollow clamping cylinderChuck:Hainbuch SpanntopTool carrier I (X/Y/Z):Technology:Tool turretNumber of stations:12 unitsTool holder:VDI 25Tool drive:6,000 rpmX-axis:220 mmY-axis:60 (+/- 30) mmZ-axis:320 mmTool carrier II (X/Z):Technology:Tool turret:Number of stations. 12 units ...
Technical Specifications & Performance Data The Twin Pack MDEL-S is a reliable automatic handle applicator designed for post-filling operations in beverage production and industrial packaging. This second hand unit is suitable for integration within a used bottling line to enhance pack presentation and consumer convenience for PET containers. Manufacturer: Twin Pack Model: MDEL-S Year: 2008 Category: Handle Applicator Application: Automatic carry-handle application for PET containers No. of tracks: 1 (single-lane configuration) Container types: PET primary; can be synchronized with lines handling glass or aluminum containers downstream of filling Bottle formats: Compatible with a wide range of PET bottle heights and diameters (format parts may be required) Production speed/capacity: Throughput dependent on container size, handle type, and line speed; designed to match medium-to-high spee ...
Gildemeister Twin 65 Y - RG2Year of manuf. : 2007 Control : Siemens 840 D Turning diam. : 250 mmTurning length : 650 mm____________Description:In General:Year of construction:2007Control:Siemens 840 DBar capacity:65 mmTurning diameter:350 mmTurning length:650 mmMain spindle:Technology:Motor spindleSpeed:5,000 rpmPower max.:35 kWTorque max.:370 NmC-axis:0.001Bar capacity:65 mmChuck:Hainbuch Spanntop size 65Clamping cylinder:Hollow clamping cylinderSub spindle:Technology:Motor spindleSpeed:5,000 rpmPower:26 kWTorque:290 NmC-axis:0.001Chuck:Hainbuch Spanntop size 65Clamping cylinder:Partial hollow clamping cylinderZ-axis:670 mmX-axis:175 mmTool carrier i (X/Y/Z):Technology:Tool turret, 12 stationsTool holder:VDI 30Tool drive:4,000 rpm, 11 kW, 28 NmX-axis:300Y-axis:80 mm ( +/- 40 mm)Z-axis:650 mmTool carrier II (X/Z):Technology:Tool turret, 12 stationsTool holder:VDI 30Tool drive:4,000 ...
: neu : ca. 6 Monate ab Auftragse : Spanien STANDARD EQUIPMENT • Uncoiler • Coil car • Pneumatic input table • Entry guide • 7 Straightening rolls • Slitting shaft with 3 sets of quickly adjustable circular blades • Cut-to-length shears • Servomotor OPTIONS • Hydraulic input table • Film plastic device • Scrap rewinders • Additional circular blades • Stacking tables • Packers Model: Width to process: Cutting thickness (mm): Coil weight (kg) Number of straightening rolls: Cutting accuracy: Number of straightening rolls: Production speed: TwinCut 20 DM6 1000 1250 1500 0`5 - 2 6.000 3 - 6 +/? 0`5 mm 2 + 7 20 m/min TwinCut 20 DM10 10.000 TwinCut 20 DM15 15.000 MATERIAL TO BE PROCESSED: THICKNESS: N OF SIMULTANEOUS CUTS: Steel 420 Nw/mm2 2`00 mm 3 1`50 mm 4 0`50 mm 6 Steel 700 Nw/mm2 1`25 mm 3 1`00 mm 4 0`50 mm 6 Steel 200 Nw/mm2 4`00 mm 3 2`00 mm 5 ...
max. wheel diameter:260 mm gear width:320 mm max. module:5 weight of the machine ca.:21 t dimensions of the machine ca.:8,71 x 5,97 x 3,49 m no. of teeth:1...999 max. helix angle:+45/-45 ° pitch min.:0,1 mm pitch max.:1000 mm X-axis:345 mm y-axis:250 mm Z-axis:320 mm b-axis:360 ° c-axis:360 °
turning diameter:120 mm turning length:650 mm weight of the machine ca.:11 t dimensions of the machine ca.:5,032 x 3,048 x 2,445 m Gildemeister MF Twin 65-II lathe with loading automation. This machine is suitable as a counter spindle machine for 4-axis machining on the main and counter spindles, complete machining (turning, drilling, milling, Y-axis, B-axis) of bar and shaft parts.
turning diameter:120 mm turning length:650 mm weight of the machine ca.:11 t dimensions of the machine ca.:5,032 x 3,048 x 2,445 m Gildemeister MF Twin 65-II lathe with loading automation. This machine is suitable as a counter spindle machine for 4-axis machining on the main and counter spindles, complete machining (turning, drilling, milling, Y-axis, B-axis) of bar and shaft parts.
turning diameter:145 mm turning length:210 mm total power requirement:40 kW swing diameter:145 mm Spindle bore sp. 1:56 mm Spindle bore sp. 2:56 mm swing diameter over face slide:145 mm greates pass round over bed:145 mm RPM Main Spindle:7.000 1/min number of workpiece supports:12 Shank diameter:25 mm C-axis RPM:2.000 1/min Chuck diameter spindle 1:140 mm Chuck diameter Spindle 2:140 mm Number of tools:12 fach St. Tool bore:VDI 25 Shank diameter:25 mm weight of the machine ca.:5.300 kg dimensions of the machine ca.:5.000 x 4.100 x 2.050 mm Slide path flat: X1, X2, X3: 220mm, 120mm ( 145mm ) Longitudinal slide travel: Z1, Z2, Z3: 320mm, 345mm, 380mm Vertical slide travel Y1: +/- 30mm Longitudinal spindle travel Z3: 380mm Clamping tube inner draw tube 46mm diameter Speed range main drive 1+2 up to 7,000 rpm Speed of driven tools up to 6,000 rpm Main and counter spindle collet chuck 1 axial ...
Screw Diameter: 140 mm // Throughput: 900 kg/h
Screw Diameter: 92 mm // Throughput: 800 kg/h
Screw Diameter: 130 mm // Throughput: 800 kg/h
Screw Diameter: 50 mm // Throughput: 150 kg/h
BANDERA TWIN SCREW PVC PIPES EXTRUDER, for pipes with min/max diam.40/200 mm., extruder with n.2 parallel counter-rotating screws Ø 90 mm, Throghput rate 400 kg/hr, missing of screenchamger (can be added separately), n.2 dies available 40 to 125 mm + 125 to 200 mm., Tooling from 40-200 mm (available diam. 100 mm for O-Ring), Bandera 6 mt.long vacuum calibration tank, IPM haul off unit, IPM saw, IPM belling unit, constructed in 1998, totally refurbished in 2006 by Plasco, machine now disconnected, offered RECONDITIONED., availability: immediate, working width: 40-200 mm Ø, capacity: 400 kg/h, conditions: disconnected, type: pipes extrusion line
used
1 x Adamson 96in wide x 32in dia 4 roll Z Calender line, peripherally drilled rolls with oil heating, motorised nip adjustment to rolls 1,2 and 3 (roll 4 fixed). Cross axis roll 4. Hydraulic pre-load to all rolls, Adjustable stock guides, rubber coated pressure roller with hydraulic adjustment and v/s motor to roll 4, with Adamson unidrive gearbox on universal couplings, with 500HP, 850/1300rpm, 785A, 500V, 3ph, 60Hz Reliance DC variable speed motor to rolls 1, 2 and 3. 200HP, 850/1400rpm DC variable speed motor to roll 4. 1 x Embossing station 1 x set of 8 x 96in wide x 24in dia stainless steel cooling drums. 1 x Dual turret winder. Full drawings available. We can supply the upstream equipment I.e. internal mixers that fed the calenders, along with the batching and material handling/dosage equipment. Complete line available in very good condition previously us ...
used
1 x Rodolfo Comerio 2200mm wide x 700mm dia two roll mill, Year of manufacture: 1981, motorised nip adjustment, Rollers bearings, Direct drive gearbox (no bullgear) With 138Kw DC variable speed motor and controls Stip knives to back roll?. In very good condition.
GP113 - used approx. 15.8 m³ / 15,800 litres PVC-GF tank, aboveground, vertical, flat bottom, in good condition. volume: approx. 15.8 m³ / 15,800 litres material: PVC-GF tank diameter: Ø approx. 2.30 m height: 4.30 m Vertically standing PVC-GF-tank, aboveground storage tank, round shape, flat bottom, access on the tank body, multiple in- and outlets on the rooftop. Tank as shown on the pictures. For media with a specific weight of up to 1.42 kg / L. The container can be used as a storage tank for water, feed, liquid feed, manure, seeping juice, rapeseed oil, or as a rain collection tank, water tank and more. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank ...
IMMEDIATELY AVAILABLE - video link on request KA 550 CNC-DRILL CNC-controlled 3-axis sawing and drilling center for sophisticated production technology Encapsulated, compact machine - designed as a closed production island - no noise and no chips in the machine environment - large extraction connection for efficient chip extraction. (The machine is also supplied as a two-axis sawing center without drilling unit). Dimensionally accurate 90° saw cuts both in small series and in large series production. CNC control based on Windows® with touch screen and color screen, simple menu-driven programming with symbols, remote maintenance module. Absolutely burr-free precision sawing of all materials such as - various plastics such as PVC and polyamide - GRP (glass fibre reinforced plastics) - aluminium - bronze - wood - copper - brass and . Drilling (through holes and blin ...
Auction-ID: A7-45209-5
Auction-ID: A7-45209-4
Complete laundry for PET, PVC or PS in stainless for some: 500 Kg / hour. Composed of: -Reception and densing raft: 1,500 mm x 500 mm, with two blades. -Collection and stirring pond: 1,500 mm x 1,500 mm. With emptying valve and outlet belt to centrifuge of canjillions. -Centrifuge: 3,000 r.p.m., 12.5 c.v. -Collection and shipment of centrifuge to chamber separation of paper and thin. -System by air extraction separation of papers. -Collection and shipment to cyclone for Big-Bag filling.
Complete solution for the transport of bulk materials such as wood chips, wood pellets, shredded material, granules, etc. Aluminium angled conveyor belt incl. substructure horizontal area 2,500mm Ziruu8vxy Rising area 2,400mm Angle in bend 45° Feed height: 300mm Discharge height 2,000mm Total conveyor belt length measured on the floor: 4,200mm Conveyor belt width 500mm PVC conveyor belt incl. cleats and corrugated edge Propulsion: Motor 0.55KW Speed approx. 0.3-0.5m/sec Connection 400/240V, 50Hz IP54 protection Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Scalloped edge: 50x35mm 25 pcs T-40 cleats - 396mm pitch 2-ply particularly transversely stable Usable width: 290mm, results as follows: Transverse arrangement 70+35+290+35+70mm ONLY AS LONG AS STOCKS LAST All our prices are net prices plus VAT. - can a ...
Year: 2020 - technically efficient, ready to work - after full service - automatic feed - disc diameter: 400 mm - cooling system - disc rotation 45/90/135° and tilt 45° - vertical and horizontal pneumatic pressure - compressed air preparation station
PVC PROFILE EXTRUSION LINE EVC BRAND, single screw extruder with 60 mm 28 LD, constructed in 1998, for 180 mm max width, 44 kw drive, control panel, Calibrating desk 3,7 m.long with 1 x 9 kw.pump, Caterpillar pull off unit, 180 mm wide, saw, 6,0 mt.long discharging table.
n°1 Balacchi BR4SSB PVC welding machine Year 2004 -n°1 Balacchi BR12PT PVC welding machine year 199
BATTENFELD EXTRUSION LINE FOR PVC, EVA,.., including:, PAPENMEIER MIXER, type TSEH 200/KMSU 400 L, construction year 1991, Electrical power heating 30/35 kw - Cold 6,0/7,5 kw, including supporting structure, Total dimensions LWH : 2.4002.6502.550 mm., Weight : about 3.000 kg., BATTENFELD EXTRUDER, metal detector, feeding unit, barrel with screw 150 mm., 7 heating areas, 5 cooling fans, Assea 110 kw Drive, vacuum degassing pump, screenchanger 2x 90 mm.Ø, heating 4,0 kw, Gneuss temperature probes, hydraulic power station 2,3 kw, air pelletizer, variable speed, self adjusting knives, 1,5 kw drive, adjustable pressure, extra (Bausano cutting system with inverter), pellets cooling unit, vibrating screen with one air turbine on each side, Constructed in 1989, Documents available, offered AS IS WHERE IS or CHECKED., CUTTING: AIR
maximum number of results exceeded
please refine your search
10 € 
