134,521 used machines on RESALE, but how to find them? Machine Search
Twin-shaft shredder, 380 volt power supply, ideal for plastic, wood, iron chips, paper. Loading mouth 620 x 570 mm, working area 350 x 300 mm, never used 0 hours Overall dimensions: 1500 x 1000 x 1500 mm Weight: 1000 kg Auction-ID: A7-49514-138
TESA Twin-Cal IP67 professional digital caliper with capacity 0 to 300 mm for dimensional control, metrology, CNC machining, industrial maintenance and quality control operations. Thanks to its IP67 protection, this instrument is suitable for use in industrial environments. Suitable for the precise measurement of diameters, thicknesses, lengths, depths and dimensions of mechanical parts. Auction-ID: A1-48554-1012
Set of four TESA Twin-Cal IP67 digital calipers for mechanical workshop dimensional control operations, CNC machining, industrial maintenance, precision manufacturing and metrology. These professional instruments allow the measurement of thicknesses, inner and outer diameters, depths and lengths with direct digital reading. The IP67 protection makes them suitable for use in industrial environments. Ideal set for machine shops, quality departments, maintenance or metrology equipment dealers. Auction-ID: A1-48554-1001
Set of four TESA Twin-Cal IP67 digital calipers for mechanical workshop dimensional control operations, CNC machining, industrial maintenance, precision manufacturing and metrology. These professional instruments allow the measurement of thicknesses, inner and outer diameters, depths and lengths with direct digital reading. The IP67 protection makes them suitable for use in industrial environments. Ideal set for machine shops, quality departments, maintenance or metrology equipment dealers. Auction-ID: A1-48554-1003
Set of four TESA Twin-Cal IP67 digital calipers for mechanical workshop dimensional control operations, CNC machining, industrial maintenance, precision manufacturing and metrology. These professional instruments allow the measurement of thicknesses, inner and outer diameters, depths and lengths with direct digital reading. The IP67 protection makes them suitable for use in industrial environments. Ideal set for machine shops, quality departments, maintenance or metrology equipment dealers. Auction-ID: A1-48554-1002
TESA Twin-Cal IP67 professional digital caliper with capacity 0 to 300 mm for dimensional control, metrology, CNC machining, industrial maintenance and quality control operations. Thanks to its IP67 protection, this instrument is suitable for use in industrial environments. Suitable for the precise measurement of diameters, thicknesses, lengths, depths and dimensions of mechanical parts. Auction-ID: A1-48554-1011
General Description Twin-opposed spindle CNC turning center manufactured by Shanghai SIO Electromechanical Technology Co., Ltd. , model FC-500 . Designed for high-productivity machining of shafts and similar components by enabling simultaneous or sequential machining from both ends. The machine is equipped with Siemens CNC control, hydraulic workholding and automatic chip removal. Technical Details Manufacturer: Shanghai SIO Electromechanical Technology Co., Ltd. Model: FC-500 Machine type: CNC twin-spindle turning center Year: 2019 Serial number: 20191011 Power supply: 400 V, 50 Hz Connected load: 25 kVA Twin opposed spindle configuration Siemens SINUMERIK CNC control Siemens SINAMICS servo drives INVT frequency inverters Hydraulic workholding system Automatic lubrication Chip conveyor Electronic handwheel (MPG) Precision linear guideways Ball screw driven axes ...
BIGLIA B565 SM (2014) is a two-spindle CNC turning center, equipped with a GE Fanuc Series 32i MODEL B control and an S+M configuration with sub-spindle and rotating tools. Capabilities: Maximum turning diameter: 290 mm Maximum turning length: 560 mm Main spindle bar passage: Ø 65 mm Passage diameter above the bed: 580 mm Main pin: Speed: 30 to 4,000 RPM Spindle Nose: ASA 6\" Spindle Bore: 76 mm Chuck: 210 / 250 mm Engine power: 26 kW / 15 kW C-axis resolution: 0.001° Sub-spindle (S): Speed: 30 to 5,000 rpm Spindle Nose: ASA 5\" Chuck: 165 mm Engine power: 11 kW B-axis stroke: approx. 560 mm Turret and rotating tools (M): 12 positions, all motorizable Index time: 0.15 s Rotating tool speed: 30 to 4,000 rpm (6,000 rpm optional) Rotating tool power: 5.5 kW Tool section: 25 ...
Functional Hydrolic width adjustment option Group / version: A02 / 0700 Identification number: 60404406 GVW: 1,950 kg Permissible axle load: 1,300 kg Permissible support load: 650 kg Drive: Power take-off (PTO) Configuration: 2 rotors Chassis: Wheeled Windrow removal: central Folding: Lifting rotors for transport Marking: CE Auction-ID: A3-46151-35865
Twin-shaft shredder, 380 volt power supply, ideal for plastic, wood, iron chips, paper. Loading mouth 620 x 570 mm, working area 350 x 300 mm, never used 0 hours Overall dimensions: 1500 x 1000 x 1500 mm Weight: 1000 kg MACHINERY WITHOUT CE MARKING, NOT COMPLIANT WITH EU DIRECTIVES, INTENDED EXCLUSIVELY FOR NON-EU MARKETS Auction-ID: A7-49514-56
KASTO KASTOtwin A2 automatic band saw with roller conveyors KASTO KASTOtwin A2 automatic band saw, equipped with roller conveyors and an automatic feeding system for cutting metal profiles, tubes and bars. The KASTO brand is recognized in the field of industrial sawing for its robustness, precision and reliability in production. This machine enables automated material flow with excellent repeatability, making it an ideal solution for: Mechanical workshops Metal constructions locksmith Boilermaking Throughput Centers Industrial maintenance Mass production The conveyor + machine assembly constitutes a complete industrial sawing plant. Auction-ID: A1-48554-230
spray hose available (not in the picture) Auction-ID: A1-47361-1000
Equipped with: electric windows, cruise control, windscreen wipers, manual transmission, handbrake, isofix, spare tire Auction-ID: A1-47415-174
Type: Linear axle unit / gantry axle with timing belt or spindle drive and electric motor Features: Gray extruded aluminum profile, blue end caps, attached motor and control unit/control box. Auction-ID: A1-49964-56
Renault Twingo II 3-door passenger car – manual transmission – air conditioning – 273.720 km On offer is a Renault Twingo II, finished as a compact 3-door hatchback in white body color. The car has a reading of 273,720 km and is equipped with a 5-speed manual gearbox. The vehicle has a four-seater interior with dark fabric upholstery. Visible equipment includes automatic air conditioning, radio/CD installation, electric windows, central locking, front fog lights and Renault alloy wheels. The rear seats can be folded down, which allows the luggage space to be increased. Features: Renault Twingo II 3-door hatchback Odometer reading: 273.720 km 5-speed manual gearbox Automatic air conditioning Radio/CD Electric windows Central locking Dark fabric upholstery 4 seats Folding rear seats Renault alloy wheels Front fog lights White body color Dutch registration: 01-NJB-5 Condition: us ...
TWINHORN VF-500-5A 5-axis continuous vertical machining center from 2023, Heidenhain TNC 640 control, spindle 20,000 rpm. Recent machine, very few hours, in perfect working order. Features Brand / Model: TWINHORN VF-500-5A (Chi-Fa Machinery, Taiwan) Serial No.: V2304001 Year of Manufacture: 2023 (09/2023) CNC control: Heidenhain TNC 640 5 continuous axes: cradle table with B and C axes, Campower roller gear cam drive without backlash Spindle speed: 20,000 rpm max X, Y, Z Fast Forward: 48 m/min Strokes: X 360 mm - Y 355 mm - Z 330 mm Maximum load on the table: 200 kg Maximum tool weight: 3 kg (30 kg gross) - maximum diameter 80 mm Probe integrated into tool management Power supply: AC 415 V - 50 Hz - 3 phases - 21 kW - 41 A Compressed air required: 5 to 6 bar, 150 l/min Machine weight: 3 tons Equipment Tool magazine with tool holder LOSMA Galileo ...
Pipe screw, cement screw used without motor for the conveyance of cement or similar materials with directly attached bearings Total length: 6520 mm Screw aisle length: 6130 mm Screw aisle: 210 mm Shaft of 80 mm, slope progressive at the inlet Opening opposite the driven side: inside 210, flange 280 mm Opening 1 driven side: 250 mm Opening 2 (with lid) diameter: 200 mm Matching motor and overhaul can be offered optionally. Drive via flange motor with coupling
A very well preserved VML 18 R screw compressor unit is offered. The screw compressor has the following performance data: Air volume 15.82 m³/min P2e 1.8 bar. The electric motor has a power consumption of 55 kW. If you have any questions, please do not hesitate to contact us.
A very well preserved VM 8 R screw compressor unit is offered. The electric motor has a power consumption of 30 kW. If you have any questions, please do not hesitate to contact us.
A new replacement level type VMX 110 RD is offered see pictures. If you have any questions, please do not hesitate to contact us.
On offer is a very well-preserved VM 8 R screw compressor unit. The electric motor has a power consumption of 30 kW. If you have any questions, please feel free to contact us.
A new replacement stage type VMX 110 RD is offered, see pictures. If you have any questions, please feel free to contact us.
Pneumatic screwdriver, pneumatic screwdriver DESOUTTERDrück air screwdriver, rod screwdriver for screwdriving technology type SD 140-AR510-S4QDreh torque range: 0.6-14.0 NmSpeed: max. 510 rpm. Compressed air requirement: 6 barAir consumption: 8.7 l/sBit input: M6- rotary switch for clockwise and counterclockwise rotation (rotary ring control)- without screwdriver shutdown- compressed air control cable 4 mm- compressed air connection for screwdriver function min. 10 mm- Aluminum bracket for handling device- Screw feeder 12 mm (inner diameter)Dimensions L x W x H
Screw block for screw compressor, compressor, compressed air unit, stationary compressed air compressor, screw block, compressor, compressor stage -Manufacturer: Boge, screw block compressor stage from compressor type SL 270 -Screw block: type BS 430 -Final pressure: max. 15.0 bar -Hole circle: Ø 295 mm / M20 / Ø 740x22 mm -Shaft: Ø 100 x 200 mm -Dimensions: 1200/850/H790 mm -Weight: 917 kg
Screws, hex bolts, flange nuts, hexagon nuts, collar nuts, solar fasteners, cylinder screws -Hex bolts/cylinder bolts: M10 stainless steel 330 kg -Hexagonal screws: DIN 933 M10 x 100 300 pcs / M10 x 20 4400 pcs -Cylinder head screws: DIN 912 M8 x 35 6600 pcs / M8 x 30 4200 pcs -Material: Stainless steel A2 -Price/Sale: complete -Transport dimensions: 1200/800/H200 mm -Total weight: 330 kg
Screws, hexagon screws, flange nuts, hexagon nuts, collar nuts, solar fasteners, cylinder screws -Hexagonal screws/cylinder head screws:M16 / M20 730 kg -Hexagon screws: DIN 931 8.8 M20 x 60 250 pieces / M20 x 55 DIN 933 8.8 4400 pieces. -Hexagon screws: DIN 931 8.8 M16 x 50/22 150 ST -U-washers: Ø 21.0 mm DIN 125 Form B 2100 pcs. -Price: complete -Transport dimensions: 1200/800/H440 mm -Total weight: 730 kg
Washing and dewatering screw, conveyor screw, transport screw, screw conveyor, conveying technology, pipe conveyor screw, trough conveyor screw, trough conveyor screw -Conveyor screw: Washing and dewatering screw -Version: Stainless steel -Drive motors for augers: 2 units, 3 kW, 60 rpm -Conveyor screws: Ø 510 mm -Auger pitch: 4100 mm -Inlet/Outlet: mm -Number: 2 washing and dewatering screws available -Price: per piece -Dimensions: 2090/5460/H2180 mm -Weight: 2180 kg
A used replacement stage type VML 60 is offered, see pictures. The compressor stage is in very good condition, see pictures. If you have any questions, please feel free to contact us.
Screw block for screw compressor, compressor, compressed air unit, stationary compressed air compressor, screw block, compressor, compressor stage -Manufacturer: Atlas Copco, screw block compressor stage from compressor type GA 408 Pack -Screw block: Type GA 408 -Final pressure: max. 8 bar -Shaft: Ø 40 x 55 mm -Dimensions: 760/490/H500 mm -Weight: 160 kg
Large set of screws and fasteners composed of several hundred metal parts of various sizes. The contents include bolts, screws, threaded rods, washers and fastening accessories stored in various trays and bags. This set is ideally suited for workshops, maintenance departments, tradesmen, assembly companies, machine manufacturers or hardware dealers. Sale in a single lot with visible content in the photographs. Auction-ID: A1-48554-265
We offer all types of screw manufacturing machines M3 - M25 -A href=inchabc://abc.steinfels-kg.de/sale/screws/inch>all information about the machine please click here
We can offer you all types of screw making machinery for M3 - M25
M18L - 1 Screw Head Slitting Machine (used) without vibrating conveyor Make: MENN - Type: KS8 and KS5 Diameter range 1.7-10 mm Shank length under head 3-105 mm Power Piece/Min 27-1.850 Weight 800 kg Engine power 1.5 kW
Reifenhäuser Schnecke D = 120 mm - 30 l/d, used for extruder type RH or RT 1651-1-120-30 also available: Set 120 mm - 25 L/D consisting of cylinder and new screw available for Reifenhäuser Extruder Model RT/RH 1651-1-120-25
Cat. No. 07-1268 in very good condition Type SEP 100.1 Design: H1 PO1 Dimensions: Length: 143 cm Width: 56 cm Height: 143 cm Capacity: 60 litres/min., 3600 l/h Pressure: 6 bar Engine power: 4 kW DN 65 For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 On request, we will be happy to send you our complete catalogue. Sightseeing is also possible in the evening and on weekends by appointment. All prices are ex works plus law VAT Intermediate sale reserved! Freight cost share: by scope of delivery
new and origin packed set of screw and barrel for Reifenhauser extruder, model RT5801-1-150-30, screw diameter 150 mm - 30 l/d
Make: Allweiler Type: SZBP 100.1 E 11 P01 No.: 7602467 Q = 5-25 l / min = 300-1500 l / h n = 40-140 min-1 Year of construction: 1995 Condition very good Spare parts: 1 stator speed-controlled drive North Type: SK255F AL-R1500-100 L / 4E Dimensions: LWH = 1400x300x650mm Weight: approx. 120 kg
Make: Netzsch Type: NES 30A No.: 40500562 / 01 Machinenr.: 255281 Year of construction: 1994 very good condition Gear: Stöber Type: C002N-0041-D90 L4 No.: 1088609 n = 330 min-1 Engine make: DIEZ Power: 1, 5kW Dimensions: LWH = 1300x250x270mm Weight: approx. 80 kg 2. Pump: identical, but with an off switch and adapter onto screw approx. 50 l Total height: 900 with funnel
Type: SNZP 380.1 HX1P11 Year of construction: 1998 No. 7610158 Q = 30/167 l / min N = 60/220 l / min Drive North in EEx II Capacity: 3.3 kW, 400V Drive North N1-n2 = 33-258 min-1 Type: SK 33-R1960-112 M / 4 ED Dimensions: LWH = 2300x420x500mm Weight: 250 kg
Type: NUP 60 Machine number.: 218338 Com.: 205639 Year of construction: 1990 with screw feeder and paddle mixers Stöber gear Type R76-1027-750-4 No.: 874256 Rpm: 136-680 RPM Drive motor: DIETZ No.: 3807028 403195 B5/300 Power: 7,5 kW Paddle mixer power: 1,5 kW Mixing trough attachment approximately 150 l stainless steel Dimensions: LWH = 2400x630x1150mm with switchgear Weight: 600 kg
Type: NL 20 A Com.: 70 50 17 02 MaschNr.: 271872 Year of construction: 1996 unused Engine water cooled (0.75 kW) speed controlled transmission Pharmaausfuehrung Dimensions: LWH = 1400x300x450mm Weight: approx. 70 kg
Eria Pompe Pacco Type: One 80-2/AA.T34 No.: 5930 Transmission: Spaggiari Transmissioni Type: RM 100/1 No.: 101730/99 Macdonald: Ercole Marelli Power: 9.2 kW Condition very good Dimensions: LWH = 2200 x 400 x 570 mm
maximum number of results exceeded
please refine your search
3.950 € 
