pvc twin screw used for sale

For screwing steel or aluminium profile sheets. 5 boxes. 500 pieces. Auction-ID: A1-50529-244

Self-drilling screws E-X BR HT 16 5.5 x 150 INOX, colour RAL 9010, 1 box, 200 pieces. Auction-ID: A1-50529-251

For screwing steel or aluminium profile sheets. 5 boxes. 500 pieces. Auction-ID: A1-50529-245

For screwing steel or aluminium profiled sheets. 3 boxes (2x250 pcs. and 1x 100pcs.) 600 pieces. Auction-ID: A1-50529-249

Self-drilling screws E-X BR HT 16 5.5 x 150 INOX, colour RAL 9010, 1 box, 200 pieces. Auction-ID: A1-50529-255

Total dimensions approx. 800 × 1350 × 1650 mm operating pressure 12.75 bar power 30 kW Auction-ID: A7-50524-916

Self-drilling screws E-X BR HT 16 5.5 x 150 INOX, colour RAL 9010, 1 box, 200 pieces. Auction-ID: A1-50529-250

Dimensions approx. 900 1950 × 1850 mm operating pressure 9.75 bar power 30 kW Auction-ID: A7-50524-917

For screwing steel or aluminium profiled sheets. 1 box. 250 pieces. Auction-ID: A1-50529-240

For screwing steel or aluminium profiled sheets. 3 boxes of 750 pieces. Auction-ID: A1-50529-232

For screwing steel or aluminium profiled sheets. 1 carton of 250 pieces. Auction-ID: A1-50529-231

Self-drilling screws E-X BR HT 16 5.5 x 150 INOX, colour RAL 9010, 1 box, 200 pieces. Auction-ID: A1-50529-252

For screwing steel or aluminium profile sheets. 5 boxes. 500 pieces. Auction-ID: A1-50529-236

For screwing steel or aluminium profile sheets. 5 boxes. 500 pieces. Auction-ID: A1-50529-241

For screwing steel or aluminium profile sheets. 5 boxes, 500 pieces. Auction-ID: A1-50529-234

For screwing steel or aluminium profile sheets. 5 boxes. 500 pieces. Auction-ID: A1-50529-248

For screwing steel or aluminium profile sheets. 3 boxes of 100 pieces each. Auction-ID: A1-50529-230

For screwing steel or aluminium profile sheets. 5 boxes of 500 pieces. Auction-ID: A1-50529-235

Delivery pressure 8.0 bar Liters Output 2340 l/min Operating hours 13382 h (read) Operating voltage 400 V Total power requirement 15.0 kW Machine weight approx. 0.45 t Space requirement approx. 0.8 x 0.8 x 1.3 m Auction-ID: A7-50523-719

Dreh-Øüber Bett: 400 mm Dreh-Øüber Support: 220 mm turning length: 1000 mm spindle turning speed range: 12,5 - 2000 U/min spindle taper: Bajonett 55022 spindle bore: 47 mm feeds - longitudinal: 0,07 - 4,16 mm/U feeds - cross: 0.035 - 2,08 mm/U thread - mm pitch: 0,87 - 192 mm thread - inch: 2 - 24 Gang/ inch. rapid travel - longitudinal/face: 3,4 / 1,7 m/min spindle drive: 11 kW power capacity: 13 kW weight of the machine ca.: 2,8 t dimensions of the machine ca.: 2,8 x 1,2 x 1,5 m • 3-jaw chuck Ø 250 mm, • 4-jaw chuck Ø 200 mm, • 2-axis- digital display, ANILAM WIZARD LATHE - retrofitted in 1992 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 205 mm, 410 mm

1 gebr. LZS Lathe, TOS SN40B x 1000 mm Technical data (TOS SN 40 B) Center width: approx. 1,000 mm Center height: approx. 205 mm Circumferential diameter over bed: approx. 420 mm (hence the designation "SN 40") Circumferential diameter over flat lower saddle: approx. 225 mm Circumferential diameter in the offset: approx. 600 mm (if equipped with removable bridge) Bed width: approx. 400 mm ⚙️ Spindle & Feeds Spindle bore: approx. 52 mm (ideal for common rod diameters) Spindle mount: DIN 55027 Gr. 6 (with bayonet lock) Speed range: Steps graded, usually from approx. 11 to 2,240 rpm (in several steps via gearbox) Power of the main motor: approx. 6.6 kW (powerful industrial drive) Dimensions & Weight Machine weight: approx. 1,800 kg to 2,100 kg (depending on tip width) Space requirement (L x W x H): approx. 2,500 x 1,000 x 1,350 mm (with 1,000 ...

Ballfood Extru25 screw extruder Screw extruder designed for high capacity dough production, variable speed, with ball rolling machine, 1Ph

Unaudited Auction-ID: A1-50540-190

Key data: 27 mm, 36 , 1200 U/min

Warehouse – No. 2875 1 used, in 2026 Partially overhauled and function-tested compounding granulation line, consisting of: Brabender grav. Dosage 2-components (expandable, optional vs. surcharge) with 1x FlexWall 40, 1x DDW-MD5, Congrav RC4 control stand-alone Extruder Twin Screw Leistritz Type ZSE 27 HP Synchronous, seal-combing, segmental screw and barrel with intensive cooling. Screws 2x Ø 27 mm- 36 L/D with 8 cylinder zones with 3x degassing zones, 1x vacuum pump 1.5 kW Screw speed up to 1,200 rpm.-1 – adjustable Extruder drive 33.8 kW - Heating capacity 9.8 kW installed Mass pressure sensor Control Macromatex III MAAG Gala Underwater Pelletizer Type LPU Model SLC 5, incl. Polymer start-up valve with hydraulics Perforated plate 20°, granulator SLC 5 with drive 1.5 kW Water Box - Temperate water system with Granule Centrifugal Dryer Type 1150, Driv ...

Key data: 8 bar, 45000 L/min

RENNER RSF 250 D-7,5D Screw compressor. Oil-Free. Motor power: 250 kW. Air flow: 45,000 liters per min. 45 m3 per min. Working pressure: 7.5 bar. Maximum allowable pressure: 13 bar. Soundproof enclosure. Electronic control with digital display. Fully automatic operation. Serial number: 545073.

The machine is equipped with a tailstock, a Multifix tool holder, and a digital readout from the manufacturer ACU-RITE. The machine comes from a training workshop, therefore the lead and feed screw are covered. Additional technical specifications: • Center height over cross slide: 90 mm • Center length: approx. 900 mm • Center height over bed: 170 mm

Total rated power: 250 kW. Maximum working pressure: 4 bar. Rotational speed: 1,879 rpm. Gross weight: 5,662 kg. Technology: variable speed drive VSD. Air quality: oil-free, ISO 8573-1 Class 0. WEG frequency converter. Serial number: APF239403.

Key data: 280 mm, 365 mm, 2240 U/min

Circulation over bed 560 mm Wire diameter over carriage 365 mm Turning length 2000 mm Spindle head DIN 55027 Front bearing 100 mm Spindle bore 62 mm Spindle speed 11.2 - 2240 rpm Spindle motor 15 KW Face slide travel 345 mm Upper slide travel 125 mm Bed widthw 360 mm Quill cone i. tailstock 5 MK Quill diameter 80 mm Quill stroke 190 mm Thread pitches 0.125 - 112 mm Machine weight 4500 KG Dimensions 3.5 x 2.0 x 2.2 m 3-axis digital display 3-jaw chuck 1 roller bezel MULTIFIX steel holder Sleigh rush walk Equipment for Metric, Inch, Module & Diametrical Pitch Threads Geometric overhaul in 2023, little used, excellent condition!

including accessories electric high/low Auction-ID: A1-50076-1072

3x Bosch torque screwdriver 2x Bosch Puc-Exact 3 power unit 1x Bosch Puc-Exact 1 power unit Auction-ID: A1-50076-207

Weller WTS A Torque Screw Analog unit Weller torque screwdriver Type WBTS12P 650 RPM 0.05-1.2 nm Auction-ID: A1-50076-68

Including Bosch puc exactly 3 and puc exactly 1 power supply Auction-ID: A1-50076-190

Screwdrivers with various moments. Includes power supply. Auction-ID: A1-50076-1050

Screwdrivers with various moments. Includes power supply. Auction-ID: A1-50076-1051

Weller WTS A Torque Screw Analog unit Weller torque screwdriver Type WBTS12P 650 RPM 0.05-1.2 nm, 2x complete, 1x incomplete, 1x imotec Auction-ID: A1-50076-496

Screwdrivers with various moments. Includes power supply. Auction-ID: A1-50076-1049

2x Bosch electric torque screwdriver incl. power unit Bosch Puc-Exact 3 Auction-ID: A1-50076-215

including accessories Auction-ID: A1-50076-1073

3x Bosch torque screwdriver 2x Bosch Puc-Exact 2 power unit 4x Bosch Puc-Exact 4 power unit Auction-ID: A1-50076-473

Complete workstation with Lista workshop cabinets Cabinets are without content. Workbench is equipped with 6 Bosch torque screwdrivers electric Rexroth work lamp and separate power supply for 100v and 120v connection. Auction-ID: A1-50076-328

Electrically adjustable workbench including electric torque screwdrivers. Auction-ID: A1-50076-419

feed pressure:10 bar airflow volume:1,06 m³/min Motor RPM:3920 1/min total power requirement:7,5 kW electrics - voltage/frequency:400/50 V/Hz machine weight approx.:250 kg dimensions L x W x H:1,5 x 2 x 2 m Professional, soundproofed compressor with the lowest noise level in its class, designed to eliminate noise problems in working environments. The powerful 5.5 hp pump unit guarantees maximum efficiency and reliability. It is also equipped with an additional intake silencer, a belt tensioning device that regulates belt tension and facilitates replacement, and a forced ventilation fan for better cooling. The control panel with star-delta start control is positioned for easy reading and operation. The opening front door allows for easy maintenance.

nominal force:315 t stroke:300 mm no. of strokes:36 /min distance between columns:540 mm distance table/ram, max. stroke up, adjustment up:750 mm table surface area:530 x 630 mm blow die to die:630 t Allowed max. force:500 t ram surface:450 x 560 mm spindle diameter:180 mm power capacity:18,0 kW weight:13,0 t Dimensions (WxDxH):2,5 x 2,0 x 4,0 m

pressure:400 t stroke:280 mm no. of strokes:56 Hub/min distance table/ram, max. stroke up, adjustment up:680 mm table surface area:560 x 750 mm allowed max. force:600 t blow die to die:800 t spindle diameter:200 mm ram surface:560 x 560 mm height over floor:4,1 m power requirement:37,0 kW weight:12,0 t dimensions (WxDxH):2,2 x 2,0 x 4,25 m