pvc twin screw used for sale

Manufacturer: Superfici mit Hochtrockner, Type: Twinspray, Year: 2001, Work piece width min-max mm: 1300, Min.-max. workpiece height in mm: 80, Working widht max mm: 1300, Spraying line: yes, work piece cleaning: Rakel, Conveyour system: Band, Fast exchange system spray gun carrier: yes, Laquer circles: 5, Laquer system - airless: yes, Laquer system - airmix: yes, Laquer recharging: yes, Dry exhauster: yes, Belt conveyors (number): 2, High dryers (number): 24/5500 mm, Length of pallets mm: 5500, Feedin speed m/min: 3-5, Year :2001

Capacity: 3,224 kW Volts: 400 HZ: 50 Condition: Very Good Scope of Supply: Complete Turbine Power Station with turbine and alternator, Control Panel, Condensor, Cooling Towers, Spilling Unit, Switchgear, Synchronisation panel, Transformer, Piping / wiring / pumps. Total cost for power plant components was around 3 million on the actual power plant components. Nominal Steam requirement to run the turbine is 17, 5 t/h at 29 barg & 350 °C. Available for sale from Gas Engine Exchange . Please check our full range of equipment at gasengineexchange.com.

Filter manufactured by TWIN FILTER, model HPF 18-D-14. Filter cloth diameter: 435 mm Number of cloths: 14 Material 316/316L stainless steel Technical features Model HPF 18-D-14 Year of manufacture 2012 Vessel working pressure 6 bar Vessel working temperature 90 ºC Half-coil/jacket working pressure 6 bar Half-coil/jacket working temperature 90 ºC Half-coil/jacket volume 3 L Total vessel volume 188 L Transport information Length 1000 mm Width 950 mm Height 2100 mm Filtration area Filtration area 2 m² Condition As is Made by TWIN FILTER

Key data: 500 mm

Max. saw length: 5,000 mm Max. saw blade diameter: 500 mm Automatic positioning of the length as well as motorized angle adjustment inwards and outwards Moving roller conveyor Material support Minimum quantity spraying device Weight: 1800 kg

bar capacity 90 mm - 2x12 driven positions turrets - Y axis in upper turret - tail stock - very very well equipped ( 36 driven + 39 fixed tool holders - 30 collets etc.etc.) - Lns Sprint S2 barfeed with front magazine - Siemens 840D Power Line Control - IN PERFECT CONDITION

Used dough weigher Rheon VX212 Twin Divider from 2009 optionally with belt table including frequency controller for sale. The machine is visually and technically in good condition and can be viewed and tested in the warehouse in Bielefeld. We will be happy to send you further pictures and information on request. The Rheon dough divider weigher can optionally be offered as a completely overhauled version. - Year of construction 2009 - 800 kg per hour - Accurate dough weighing - With digital control panel - with program memory - Machine is checked and cleaned - Trade-in and delivery on request - Machine can be inspected in our warehouse and be tested

Vertical packaging machine for forming and sealing pillow bags and gusseted stand-up pouches (gusset tool needed) OR for pyramid shaped bags (special sealing unit is than mounted just for it). Twin version for faster output due to 2 complete production lines in one machine. The packaging machine is equipped with: touch screen operating interface | plc | eye mark sensor for seal/cutting position | servo driven sealing unit for end sealing | servo motor for film pulling | ribbon printer for batch number, date, BBD. - Specifications VFFS machine: max. speed of the machine in neutral: 902=180 cycles/min | bag sizes: L(40-300)xW(60-180)mm, (double film pulling possible for longer bags) | suitable film width: 140-380mm | product contact parts from: AISI 304 (optional for surcharge AISI 316) | power supply: 220V, 50/60Hz | power consumption: 3.9kW | air pressure: 0.4-0.8MPa | compressed air con ...

GILDEMEISTER MF twin 65 CNC lathe was built in 2000 in Germany by GILDEMEISTER Drehmaschinen GmbH. This extremely efficient machine is used for precision machining of workpieces with a maximum diameter of 200 mm. The machining process is performed inside a large work space, by means of two spindles and tools taken from two 12-position turrets. This solution maximises production efficiency by enabling simultaneous workpiece machining on both spindles. What’s more, any vibration or oscillation is eliminated by a rigid bed, guaranteeing high process stability even during the most intense challenges. The MF twin 65 CNC turning center, including the control cabinet, weighs approximately 6500 kg. Technical specifications of the GILDEMEISTER MF twin 65 CNC dual-spindle lathe General data - number of axes: 4 (X1,X2,Z1,Z2) - swing over bed: 240 mm - maximum turning diameter: 200 mm - ma ...

A DMT lathe is available. Center distance: 1000mm, swing diameter over bed/face slide: 420mm/210mm, bed height: 340mm, spindle bore: 64mm, spindle diameter: 115mm, speed: 4000rpm, quill diameter: 60mm, quill stroke: 140mm, face slide width: 210mm, face slide length: 640mm. Machine dimensions X/Y/Z: approx. 2150mm/1150mm/1700mm, weight: approx. 1800kg, control: Heidenhain, operating hours: approx. 300h. Documentation available. On-site inspection is possible.

Multiweigh 20 heads weigher, - With horizontal vibratory feeders for fast products like frozen food or sweets/ nuts., - 20 heads, - Fully stainless steel rigidized material to prevent sticking., - With collection bucket for a faster more controllable workflow

BALESTRINI 5-axis machining centre mod. BIG IDEA – CE compliant - Axle travels: X 1600 mm. Y 3000 mm. Z 700 mm. A Unlimited C 400° - Maximum dimensions that can be processed on two benches simultaneously 2800 x 1100 x 700 mm - Maximum dimensions that can be worked on an alternating cycle bench 1300 x 1100 x 700 mm - LS 44con head n. 4 x 7.5 kw air-cooled Colombo electrospindles - 18,000 rpm - N. 2 Becker vacuum pumps 100 mc/h - NUM numerical control - Alphacam dongle -Cabin - Year 2005

Twinpack automatic handle applicator model MGE Manufacturing year 2010 Setting handles on shrinked bottles packs Capacity up to 50 packs per minute Siemens S7 machine drive CE control panel Machine in very good condition Recently dismantled and now stored dry and clean in warehouse Available immediately

chucking diameter: 250 mm workpiece dia.: 200 mm control: Siemens 840 D sl c-axis: Position genauigkeit arcs 10 tool turret with 12 work positions: 12 turning spindle: 2 spindle turning speed range: 6.000 / (4.500) U/min Spindle power: 26 / (28,3) max. torque on the spindle: 150 / (300) spindle nose: 55026 - A6 tool taper: VDI 40 turning speeds: 10.000 U/min z-travel: 370 mm x-travel: 30 mm y-travel: +- 40 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 8000 mm, 3 mm

Machine is in stabillier welded construction with 9 columns, 9 clamping cylinders and 36 coupling joints K38 mounted on a base frame The machine has the following equipment: CNC 8000 Control with Touch Screen TFT Color Display 17 Inch Attachment rail, brush table, upper beam with water seam groove Oil filling, fastening and levelling material, emergency stop rail via the Full length of the machine, integrated emergency stop operation in the foot pedal for upper and lower Bending beam, 2nd foot pedal for 2-man operation, upper bolster protection 2 short-part clamping fingers Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Working length: 8000 mm Sheet thickness max. steel: 3.0 mm Sheet thickness max. aluminium: 4.0 mm Sheet thickness max. VA: 2.0 mm Back gauge (max:.) 1150 mm Back gauge (min.): 150 mm Colo ...

Cutting range round: 560mm, cutting range flat (W x H): 620/560mm, material feed length, single: 900mm, multiple feed: 9999mm, shortest cut length: 6mm, minimum diameter to be cut: 15mm, minimum remnant in single cut: 15mm, shortest remnant length in automatic mode: 80mm, saw motor power, frequency-controlled: 5.5kW, cutting speed, stepless: 13-127m/min, saw blade dimensions: 7400/54/1.6mm, material support height: 700mm, total drive capacity in basic configuration: 12kW, length: 2370mm, width: 3610mm, overall dimensions with chip conveyor (L/W): 2370/3610mm, machine table height lowered: 2230mm, weight: approx. 5.2t with chip conveyor. An inspection on site is possible.

Used dough divider RHEON, type: Twin DIvider 400 VX 202 Dough-friendly division from roe dough to Italian ciabatta. The dough is divided by weight and not volume, which means that there is no pressure on the dough and the gluten is preserved. - 1 or 2 rows - RHEON Gravimetric control - Capacity: 800 kg/h - Initial width: 130-150 mm - Weight range 1 row: 150 - 1,200 g - Weight range 2 rows: 75 - 600 g - Condition: Good, ready to use Visits and test runs are possible by arrangement.

Kasto Twin U 4 Depth of throat: 400 mm Max height of workpiece: 400 mm Sawspeed: 20-110 m/min Length of band saw: 5700 x 41 x 1.3 mm Power needed: 6 kW

Basket dimensions X/Y/Z: 670mm/480mm/300mm, max. batch weight: 200kg, average batch weight: 150kg, cycle time: approx. 5-10min/batch, heating time: 3h-4h, working chamber: 2, water quality: approx. 10°dH, exhaust air volume: approx. 240m³-480m³/h, loading height: 920mm, water/air temperature: 70°C/130°C, cleaning agent pH range: 7-9. Machine dimensions X/Y/Z: approx. 5400mm/2500mm/3100mm, weight: approx. 5000kg. Documentation available. A visit on site is possible.

Dimensions (L/W/H): 0x0x0 mm Weight: 300 kg Total power requirement: 0,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mm Weight: 0 kg Total power requirement: 0,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mm Weight: 0 kg Total power requirement: 0,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mm Weight: 0 kg Total power requirement: 0,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mm Weight: 0 kg Total power requirement: 0,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mm Weight: 0 kg Total power requirement: 0,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

All-Fill Series 200 Twin Head Automatic Filling machine Find more here - .ucymachines/ Contact us at - sales@ucymachines

- Rheon dough weigher - Twin Divider 400 VX202 - Year of construction 2004

Demonstration machineThe professional brushing machine for surface finishing, fine grinding, structuring, fine sanding and other finishing work.The surface depends on the tools used.Standard version:Independent height adjustment 1st and 2nd unit, 2 rubberized pressure rollers height adjustable,scale with display of roller height,Roll height electrically adjustable,Machine is CE compliantTechnical data:Working width 400 mmmax. Diameter of the tool 300 mmClamping shaft D=

Technical data:Working width 600 mmmax. Diameter of the tool 300 mmClamping shaft D= 40 mm2 Feed speeds 4.5 / 9 m/minEngine output S1 at 100% 2 x 5.5 hp (4 kW) Max. workpiece height 300 mmRotation of the work rollers 950 rpmBrush diameter 120 - 300 mmTotal weight 820 kg

This EMAG VTC 250 Twin was manufactured in 2015. A robust vertical turning machine featuring a MINERALIT base, it handles workpieces up to 140 mm in diameter and 630 mm in length, weighing up to 20 kg. Integrated with an EMAG pick-up system and dual turrets, each with 11 tool stations. Maximum spindle speed reaches 5000 rpm, driven by a 29 kW power unit. Contact us for more information about this machine.

This Gildemeister TWIN 32 horizontal turning machine was manufactured in 2000. It features a Siemens control unit, a bar passage with a maximum diameter of 32mm, and a bar loading magazine IRCO with a length of 3000mm. Additionally, it includes a chip conveyor and a parts pick-up device. If you are looking to get high-quality turning capabilities, consider the Gildemeister TWIN 32 machine we have for sale. Contact us for further details regarding this machine.

This 6-axis Quick-Tech i60 twin was manufactured in 2016, featuring a CNC turning center with B-axis and driven tools. It includes a main spindle bore of 60 mm, sub spindle bore of 42 mm, and a maximum turning length of 300 mm. The machine offers 4-axis simultaneous machining, full axis programming, and a Mitsubishi M70 control system. Consider the opportunity to buy this Quick-Tech i60 twin horizontal turning machine. Contact us for more information about this machine.

This PEMA Column & Boom HD 4x4 Twin SAW was manufactured in 2019. It features a PEMA control panel with touch screen and WeldControl 100 for precise beam welding. The machine includes twin SAW heads, motorized traveling carriages, and a comprehensive wire feeding system. Ideal for longitudinal-shaped workpieces with a working range of 4m vertically and horizontally. Consider the opportunity to buy this PEMA Column & Boom HD 4x4 Twin SAW laser welding machine. Contact us for more information about this machine.

A CNC twin-spindle lathe Gildemeister with a Y-axis is available. Bar capacity: 32mm, tool stations: 2x12, speed main and sub-spindle: 8000rpm, control: Siemens Sinumerik 840D Powerline, operating hours: 39426h, spindle hours: 25529h. Including coolant system, tools and short bar loader 1500mm Iemca Vip 80E. Documentation available. On-site inspection is possible. Expected to be available starting end of April 2026.

Nominal width: 3000mm, Working width range: 600mm-2800mm, Layers: 1, Number of chambers: 6, Heating system: Gas, Air supply: top/bottom, Max. working speed: 100m/min, Chain arrangement: horizontal, Cooling cylinders: 2, Padder: twin cylinder Matex 6000, Exhaust fan: 1, Documentation available, On site inspection is possible.

Packaging line for briquettes/pellets air pressure 6 bar voltage 400V power 20kW weight 800kg

Key data: 430 mm

Fully automatic band saw machine Manufacturer : Kasto Type: Twin A4 Bauahr: 2010 Condition: gebraucht / used Location : Warehouse Sweden Technical data Cutting range: Cutting range around 430 mm Cutting area square H x W 430 x 430 mm Cutting area flat H x W 430 x 430 mm Clamping range 0 – 430 mm Smallest dimension to be sawn: 10 x 10 mm Smallest section length 6 mm Shortest residual piece length in automatic mode (only possible for geometrically flawless surfaces) 35 mm Shortest offcut length in single cut 10 mm Dimensions and weights: Length approx. 2,140 mm Width incl. chip conveyor 4,610 mm Height (saw frame lowered) approx. 2,195 mm Height (saw frame in maximum position) approx. 2,410 mm Material support height 700 mm Coolant: Coolant tank volume 150 l, Pump capacity at 3 m head 25 l/min Paintwork: Machine light grey RAL 7035 textured paint Saw  ...

This Gildemeister MF twin 65 was manufactured in 1996. It features two turrets, each with 12 tool positions, all motorized-capable, and includes 14 driven tools and 14 tool holders. The machine boasts both spindles in very good condition and a bar passage of 65 mm, complemented by a Cucchi Pietro bar feeder. Contact us for more information about this machine.

An air-cooled monoblock water chiller Green Box for the plastics industry is available. Cooling capacity: approx. 20 injection molding machines, power: 25kW, refrigerant circuits: 2, refrigerant: R407C, cooling capacity: approx. 80kW, air flow rate: approx. 16500m³/h. Machine dimensions X/Y/Z: approx. 3300mm/1100mm/2100mm, weight: approx. 1300kg. Documentation available. An on-site inspection is possible.

â Product description âœ" Manufacturer: Rheon âœ" Model: Twin Divider VX 201 âœ" Year of manufacture: March 2004 âœ" Condition: used, cleaned, in working order âœ" Machine type Dough divider âœ" el. Connection: 3x 380 V / 0.93 kW / 50 Hz / 3.37 A âœ" Outside Dimensions: W.: 95 cm, D.: approx. 235 cm, H.: 170 cm The machine worked until recently in the bakery We picked it up, completely disassembled it and cleaned it After cleaning it we did not connect it should be checked first Partial belts must be replaced Details see pictures.

Milling chuck, boring head, spindle head, drill head, plunge drill head, plunge head, spindle drill head, boring head, universal drill head, boring tool, face head, facing and boring heads -Manufacturer: Komet microbore twinbore, milling heads, facing and boring heads with countersinking tool -Type: various designs, see photos -Comet: Type AB/VD 80 / AB/V 63x85 / AB/FZ 63 / AB/FZ 40 / AB/FZ 25 / FZ 32-100-3 / 2x AB/ISO 40x63x50 -Comet: Type AB/VD 63 / AB/VD 40 / AB/FZ 80 / AB/V 40x60 / AB/VD 50 / AB/V 25x60 / AB/VD 25 ... -twinbore: microbore MTP-75-1 / MTP-75-80 ... -Price/Fee: complete -Dimensions of transport case: 715/365/H210 mm -Total weight: 72 kg

General SKU231Y132 LocationBarneveld MakeWam Main Features Motor3 KW Inlet diameter100 mm Width350 mm Specified Features - Lump breaker Lump breakercheck Double shaftcheck Teeth height50 mm With hopperbag dumping station InletDN100 OutletDN350 with valve Motor3,0 kW (400 V, 1430 rpm) Rotor speed60 rpm MaterialStainless steel 1.4307 (304L) General TypeDLP2035G Year of construction2010 Mounted on wheelscheck With switchcheck Floorspace1,30 x 1,25 m Total height1,70 mConsumer wastePowdered foodsGeneric medicinesLump breakersRubberAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesOrganicsPaper & otherDetergent & surf.CosmeticsAnimal feedOther feedNew arrivalsMinerals & inorganicWamIndustries > Recycling > Consumer wasteIndustries > Food & Feed > Powdered foodsIndustries > Pharmaceutical > Generic medicinesBreakers > Lump breakersIndustries > Chemical >  ...

CNC Lathe Manufacturer: Gildemeister Type twin 42 Year of manufacture 2005 Control Siemens 840D Turning length 210mm 2 X 12-fold turret all places are powered Engine A 83700 Spindle A 50809 Machine has a defect in the pick-up spindle, probably bearing With Breuning Profimat bar loading magazine

Description with side parcel extension SPA Twin for mark-free laying out max. format 500x340mm min. format 100x100mm Product thickness max. 6mm High storage capacity Stacking height per level max. 10cm Optimal for one-man operation on folding machines at high machine speed up to 18,000 cycles User-friendly, ergonomic acceptance

This 9-axis Gildemeister TWIN 65 was manufactured in 2006. It features a spindle power of 65 kVA and a maximum spindle speed of 5000 rpm. The machine includes a tool magazine with 24 tools and a turret-type tool changer. With a robust weight of 12,000 kg and dimensions of 7855 mm x 2500 mm x 2900 mm, this horizontal turning machine is equipped with special features like a touch probe and internal coolant supply. If you are looking to get high-quality turning capabilities, consider the Gildemeister TWIN 65 machine we have for sale. Contact us for further details.

Bread roll line König Eco Twin 800 Year of Make: 2008 Head Machine, Type: Classic Rex T6S Stamp size SK58: 30 to 80 g 800 mm version: 6-/5-row working method Max. hourly output (proofer): 5040 pieces Max. hourly output (head machine): 9000 pieces With direct deduction for production without proofer operation High product variety thanks to interchangeable plunging tools and cutting station Long-knit station For the production of the following products: round, round-stamped or long-rolled, long-rolled-cut or long-rolled-pressed Incl. 1x cutting station, 1x plunger tool of your choice, according to

Key data: 50 m², 1160 kg, 3920 mm

Test mark H3 / DGUV HO 213001 Max. volume flow: 10,000 m³/h Nominal volume flow: 6,910 m³/h, 2,550 Pa Connection diameter: 350 mm Filter area: 50 m², dust class "M", AWN 16 cone Motor power: 2 x 5.5 kW Filter regeneration: pneumatic-mechanical Sound pressure level: 69 dB(A) Built according to EN 16770 Residual dust content less than 0.1 mg/m³ incl. control cabinet with 2 frequency converters incl. 2 forklift consoles

Bed Size:Left to Right 393mm 15.5 in Front to Back 393mm 15.5 in Daylight Between Tables 559mm 22 in Daylight Between Heated Platens 353mm 13.9 in Heating Electrical Induction Heated Platen Sizes(Up To) 355mm x 355mm 14″x14″ Max Working Platen Temperature 220°C Main Ram Stroke(Up To) 355mm 14 in Hydraulic Circuit Pressure 70 Bars 1000 PSI Main Ram Pressing Force 41 T 40 Ton Main Ram pull back 2.2 T 2.2 Ton Closing Speed(Up To) 150mm/s Opening Speed(Up To) 120mm/s

used compact bread roll line König Eco Twin 9000 K6-SCHN6/B Classic Rex immediately available in stock for sale. -6-row roll line -König Eco Twin 9000 K6-SCHN/B Classic -with King Classic Rex head machine - Max. hourly output: -Year of construction 2011

Handle applicator TWIN-PACK Single Lane Power 60 cpm Control Siemens S7

HAMMELMANN HDP 124 Twin Unit Integration of 2 x Hammelmann HDP 124 high-pressure pumps Technical data: Manufacturer: Hammelmann GmbH, Germany Type: Twin Unit with 2 x HDP 124 Year of Make: 2013 Machine numbers: B3.01124.xxxx and B3.01124.xxxx Working pressure: 2 x 2,500 bar Max. flow rate: 2 x 24 l/min Piston Diameter: P17.5 Engines: 2 x DEUTZ TCD 2012 L06 2V, Stage 3 Engine power: 2 x 129 kW at 2,150 rpm Diesel consumption: approx. 45–70 l/h Tank capacity: approx. 900 litres Noise emission: LWA = 110 dB Water connection: Express coupling Minimum water pressure: approx. 3 bar Required water volume: approx. 2 m³/h Dimensions: approx. 11.05 m x 2.60 m x 4.50 m Weight: approx. 11,750 kg Built on: DAF 75.250 4x2 truck, 250 hp, 19 t box body Aquajet 12 – n°01 – year 2013 2450bar – 24l/min Engine Deutz 5 919h Pump 3 723h Aquajet 12 – n°02 – yea ...