pvc twin screw used for sale

Worthington RLR 180 VPM Packaged Rotary Screw Air Compressor (2023) Auction-ID: A1-48805-119

Serial number: 1041 Rated power: 55 kW Engine speed: 2965 rpm Max. operating pressure: 12 bar Reading operating hours: 39,312 Auction-ID: A7-49089-174

Super silenced compressor, screw, 380 volt power supply, 8 bar pressure, 10 Hp power, never used packed in its original packaging Overall dimensions: 1000 x 800 x 800 mm Weight: 150 kg Auction-ID: A7-49495-352

Serial number: CAI603104 Operating voltage: 400 V Frequency: 50 Hz Connection: 7.5 kW Operating pressure: 9.75 bar Operating hours read: 31,906 Auction-ID: A7-49089-422

consisting of 5 pieces and two flashlights incl. charging station Reference: Alesco - Lot 88 Auction-ID: A7-49882-54

Lg.Nr. 26208 Technical data: - Center height 120 mm - Center width 450 mm - Largest circulation – Ø over bed 250 mm - Spindle bore 23 mm - Spindle mount with threaded nose DIN 55027 - Mounting cone of the tailstock quill MK 2 - 20 spindle speeds 60 - 3000 rpm - Feeds - longitudinal 0.03 - 3.0 mm - Flat 0.015 - 0.150 mm - Thread pitches 0.25 - 5 mm - Drive 400 V / 1.1 / 1.5 kW - Space requirement approx. W 1200 x H 1250 x D 650 mm - Weight approx. 700 kg - with: - 3-jaw chuck, - Quick-change steel holder - Moving grain tips - Separate tool cabinet with various accessories

turning diameter over bed: 320 mm turning diameter over slide rest: 180 mm turning length: 1000 mm turning diameter in the gap: 460 mm turning speeds: 70 -2000 U/min centre height: 160 mm spindle bore: 27 mm total power requirement: 2,0 KW weight of the machine ca.: 0,7 t dimensions of the machine ca.: 1,8 x 1,2 x 1,6 m Centre lathe (lead-screw and feed-rod lathe) - 160 mm 3-jaw chuck - Faceplate - Spare jaws - Quick-change tool post (base unit) - 3 tool holders - 2 steadies - Live centre - Chip tray The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

WEILER COMMODOR L&Z lathe from school operation -Turning length 1000mm -Turning diameter max. 180mm Bar Passage 56mm -Speed range 56-2000 rpm (gearbox) -Automatic longitudinal/plane feeds - Thread: Metric/Inch/etc. -Tailstock Mk4 -Three-jaw chuck approx. 200mm -Multifix base holder with insert -Tailstock MK 4 -Coolant device -Electric lining protection -Work light -Swarf back wall -Guide and pull spindle cover -2x Emergency / Off -Machine documentation -Good operational condition Dimensions: LxWxH 2.5x1.3x1.7 meters / Weight 1500Kg

Lead and tension spindle lathe Weiler Matador -Center width: 500 mm -Tip height: 140 mm -Feed range longitudinally over belt: 0.05–0.40 mm/rev -Feed range longitudinally via interchangeable gears: 0.018–0.800 mm/rev - Spindle head: size 5 -Drive: three-phase motor -Speed range: 15–3,550 rpm -Coolant pump -Wedge bar chuck Forkardt F 160 -Quick-change holder Multifix -4 lathe chisel holders -Drill chuck -Moving centering tip Dimensions: LxWxH 1.5x0.6x1.2 meters / Weight 600Kg

turning diameter over bed: 330 mm turning diameter over slide rest: 195 mm turning length: 750 mm center height over bed: 160 mm centre distance: 650 mm digital readout: 3 Achsen HEIDENHAIN bed width: 205 mm spindle bore: 36 mm spindle taper: KK5 DIN 55027 turning speed range: 48 - 2500 U/min power requirement: 3,0 kW 4-jaw-chuck diameter: 160 mm quick change toolholder: MULTIFIX Typ A taper in tailstock-quill: MK 3 dia. of quill: 40 mm quill stroke: 100 mm voltage: 400 V total power requirement: 3,2 kW weight of the machine ca.: 680 kg dimensions of the machine ca.: 1,60 x 0,80 x 1,55 m - Serial-No.: 4432 - HEIDENHAIN 3-axis digital readout - MULTIFIX quick-change tool holder - Collet chuck including collets Ø 8 - Ø 27 mm - Face plate Ø 250 mm - Quick-action drill chuck - Center point The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Volume flow rate at 7.5 bar 0.60 m³/min = 600 l/min Volume flow rate at 10 bar 0.48 m³/min = 480 l/min Volume flow rate at 13 bar 0.37 m³/min = 370 l/min Dimensions: approx. 590 × 1,090 × 1,560 mm (W×D×H) Noise level: approx. 61 dB(A) Auction-ID: A1-49964-52

Stock No.: 4037 SCREW COMPRESSOR Manufacturer: POWER SYSTEM, Type: EDISON DV 2023 Serial No.: 3499890001, Year of manufacture: 2016 Specifications: Liters per minute Variable 1,8 to 4.15 m/3 Gr. pressure 10 bar Total power 30 kW Voltage 400 volts Dimensions: Length: 835 mm, Height: 1500 mm, Width: 1400 mm, Weight: 650 kg

turning diameter over bed: 320 mm turning diameter over slide rest: 190 mm turning length: 920 mm center height over bed: 160 mm turning diameter in the gap: 430 mm centre distance: 920 mm bed width: 181 mm digital readout: DPA 2000 3 Achsen spindle bore: Ø 38 mm turning speed range: 10 - 2.500 U/min power requirement: 1,5 kW 3-jaw-chuck diameter: 160 mm taper in tailstock-quill: MK 3 dia. of quill: 32 mm quill stroke: 100 mm voltage: 400 V weight of the machine ca.: 410 kg dimensions of the machine ca.: 1,60 x 0,70 x 1,55 m ! ATTENTION ! EXCELLENT CONDITION ! This machine comes from a vocational school! - Serial No.: 832432 - 3-axis digital display DPA 2000 - Constant cutting speed - Stepless speed control - Digital speed display - RÖHM 3-jaw flat spiral chuck - Face plate Ø 255 mm - Fixed steady rest - Rotating steady rest - Machine light - Rotating center point The data for this  ...

Tetinox P1 Screws 6.3x130 TK12 All Mounted 3 in 1 Washer Jumpers 5400 Pieces Auction-ID: A1-49695-55

Technical data Manufacturer/Brand: Chicago Pneumatic Type: CPA 15 500 D CE Year of Make: 2013 Serial Number: CAI6558403 Weight: 446 kg Working pressure: 10 bar Max. pressure: 10 bar Compressor: 11 kW, 400 V, 3 Ph Dryer: 0.58 kW, 230 V, 1 Ph Pressure vessel: 500 l, hp 11 bar Refrigerant: R134a, 0.5 kg Configuration Compressor unit with integrated compressed air dryer, 500 l pressure vessel and electronic control ES 3000. Auction-ID: A1-50026-61

Tetinox P1 Screw 6.3x130 TK12 + Washer Jumper EPDM20x5x3 6500 Mounted Parts 3 in 1 RAL7016 Auction-ID: A1-49695-56

turning diameter over bed: 280 mm turning diameter over slide rest: 150 mm turning length: 500 mm center height over bed: 140 mm centre distance: 500 mm bed width: 205 mm spindle bore: 40 mm turning speed range - stepless: 30 - 4.000 U/min 3-jaw-chuck diameter: 140 mm quick change toolholder: MULTIFIX Typ A drive capacity - spindle motor: 4,0 kW taper in tailstock-quill: MK 3 dia. of quill: 40 mm quill stroke: 85 mm voltage: 400 V total power requirement: 7,5 kW weight of the machine ca.: 800 kg dimensions of the machine ca.: 1,40 x 0,95 x 1,55 m - Serial-No.: 154 - SIEMENS 3-axis digital display - MULTIFIX quick-change tool holder - rotating centering tip The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 280 mm turning diameter over slide rest: 170 mm turning length: 650 mm center height over bed: 140 mm centre distance: 650 mm bed width: 155 mm spindle taper: KK 4 CAMLOCK DIN 55029 spindle bore: 40 mm turning speed range - stepless: 4.000 U/min 4-jaw-chuck diameter: 140 mm quick change toolholder: MULTIFIX Typ A drive capacity - spindle motor: 7,5 kW taper in tailstock-quill: MK 2 dia. of quill: 30 mm quill stroke: 80 mm voltage: 400 V total power requirement: 7,5 kW weight of the machine ca.: 400 kg dimensions of the machine ca.: 1,30 x 0,70 x 1,60 m - Serial-No.: C7D W13 02 - 3-axis digital display - Stepless speed adjustment - Digital speed display - MULTIFIX quick-change tool holder The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2025 : 010105 : prompt, Zwischenverkauf v : Bulgarien : 50210 € : 863.32 € : 1 : 45200 € : 600 mm : 2000 mm : 300 mm : 80 mm : 400 mm : 400 mm : 8 : 90 MK : 21 : 20 - 2000 1/min : 120 : 0.04 - 12 mm/U : 0.02 - 6 mm/U : 64 : 0.5 - 120 mm : 60 - 1/4 Gänge/ : 0.125 - 30 : 315 mm : 130 mm : 90 mm : 5 MK : 230 mm : 7.5 kW : 3600 mm : 1250 mm : 1400 mm : 3110 kg driven by conventional gearbox 3-axes digital readout Fagor 40i quick change toolpostAmestra Multisuisse type C with 4 holders (3 square, 1 round) 3-jaw chuck Bison3204/DIN6350, Ø 250 mm spindle dead center four way rapid traverse device electromagnetic brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine accordin ...

Ktron Soder Screw feeder Stainless screw feeder, batch feeder, 150Kg stainless hopper, twin screws, 35mm screw diameter, 3Ph

Guttridge Bulkflo Mobile screw elevator, Stainless, mobile elevator screw conveyor, with a 400l holding hopper, horizontal discharge screw feeds directly onto the screw elevator, discharges at 2600mm, 160mm screw diameter, with vibratory mesh top, also three spare meshs, mobile, 3Ph

inv 7111 : Screwdriver bench Manufacturer: WEBER Year: 2011 Type: 1060 BAG / C30-M Serial Number: 20044556 Overall dimensions (W x D x H): 1350 x 800 x 1250 Weight: 200Kg Documentation: User manual Auction-ID: A1-49706-241

- Note: Buyer must disassemble a wooden wall to get this lot outside. Auction-ID: A1-49374-6

inv 4539 - Tabletop screwdriver Manufacturer: DOGA Model: GX 450P-H Year: 2020 Screwdriver head adapted to your needs Overall dimensions (W x D x H): 300 x 400 x 1090 mm Weight: 20 kg RPM: from 300 to 600 Torque: from 1 to 4.41 N/m New, tested and functional table screwdriver Auction-ID: A1-49706-57

inv 5621 - Motor + pump Manufacturer: STERLING Model: CEHA 1101 AU 138 42 4 Type: Screw Pump Leroy Somer LS 132 M engine / N°311 973 ML001 Overall dimensions (W x D x H): 1200 x 400 x 600 mm Weight: 150 Kg Auction-ID: A1-49706-105

inv 4540 - Electric Screwdriver Manufacturer: DOGA Model: GX450P-H Year: 2020 Weight/ 20 kg Dimensions 400 x 300 x (h) 800 mm Technical documentation: Available Incoterm: EXW Semi-automatic brushless electric screwdriver and matching screwdriver head Adjustable torque from 1 to 4.4 Nm For plastic and metal caps Torque adjustment by knurled ring with marks Automatic start by pressing the screwdriver head No-load speed: 700 rpm Reversible direction of rotation Voltage 230 V Dimensions 400 x 300 x (h) 800 mm RPM: from 300 to 600 Torque: from 1 to 4.41 N/m New, tested and functional table screwdriver Auction-ID: A1-49706-58

Turning diameter over face slide: 200 mm Spindle bore: 32 mm Circumferential diameter over bed slide: 315 mm Tip width: 600 mm Turning length: 560 mm Quill stroke: 140 mm Total weight: 1,750 kg Digital display Heidenhain Collet System E163

Screw compressor Käser Air Tower 26 BJ 2000

10m Screw Clamps Projection 120mm Length 300 mm Condition new Hole diameter 28 mm Number of 10 Lots Weight 30 kg Condition new Hole diameter 28 mm Condition: never used / new (5) Auction-ID: A7-50084-213

Super silenced compressor, screw, 380 volt power supply, 8 bar pressure, 10 Hp power, never used packed in its original packaging Overall dimensions: 1000 x 800 x 800 mm Weight: 150 kg Auction-ID: A7-50065-85

Offered is a Makita DDF484BJX1 cordless screwdriver Estimated value of goods: 400€ Shipping within Germany possible - direct settlement with the seller. Only bid if you have sufficient financial means, a bid is binding. Auction-ID: A7-50213-359

Super silenced screw compressor, 380 volt power supply, 8 bar pressure, 10 Hp power, never used and packed in its original packaging Overall dimensions: 1000 x 800 x 800 mm Weight: 150 kg Auction-ID: A7-50208-304

Manufacturer: ALLWEILER GmbH Type: SNH40ER38U8 9W22 Serial Number: 25060979 Flow rate: 63.7 l/min Speed: 2900 rpm Viscosity: 134.9 mm²/s Differential pressure: 2.5 bar Pressure head: 38 m Power: 3.75 kW Nominal Diameter: DN 40 (1 1/2\") Year: 2024 Auction-ID: A1-49997-14

Super silenced screw compressor, 380 volt power supply, 8 bar pressure, 10 Hp power, never used and packed in its original packaging Overall dimensions: 1000 x 800 x 800 mm Weight: 150 kg Auction-ID: A7-50208-127

Super silenced compressor, screw, 380 volt power supply, 8 bar pressure, 10 Hp power, never used packed in its original packaging Overall dimensions: 1000 x 800 x 800 mm Weight: 150 kg Auction-ID: A7-50066-85

Super silenced compressor, screw, 380 volt power supply, 8 bar pressure, 10 Hp power, never used packed in its original packaging Overall dimensions: 1000 x 800 x 800 mm Weight: 150 kg Auction-ID: A7-50065-352

Super silenced compressor, screw, 380 volt power supply, 8 bar pressure, 10 Hp power, never used packed in its original packaging Overall dimensions: 1000 x 800 x 800 mm Weight: 150 kg Auction-ID: A7-50066-352

Super silenced compressor, screw, 380 volt power supply, 8 bar pressure, 10 Hp power, never used packed in its original packaging Overall dimensions: 1000 x 800 x 800 mm Weight: 150 kg Auction-ID: A7-50208-13

Super silenced screw compressor, 380 volt power supply, 8 bar pressure, 10 Hp power, never used and packed in its original packaging Overall dimensions: 1000 x 800 x 800 mm Weight: 150 kg Auction-ID: A7-50208-223

Super silenced screw compressor, 380 volt power supply, 8 bar pressure, 10 Hp power, never used and packed in its original packaging Overall dimensions: 1000 x 800 x 800 mm Weight: 150 kg Auction-ID: A7-50208-177

4 piece cordless tool set; screwdriver, impact wrench, drill and grinder. Includes 2 batteries, charger and various accessories in case. Cordless power tools set Auction-ID: A1-40314-146

The Netzsch NL progressing cavity pump (also known as a mono or screw pump), engineered for the continuous and gentle transfer of challenging media. This pump operates on the well-proven progressing cavity principle, consisting of two primary components: a precision-machined helical rotor and a resilient elastomer stator. The rotor features a single-helix design with a large pitch, deep thread profile, and small core diameter. As the rotor rotates eccentrically within the stator, sealed cavities are formed that convey the product continuously and pulsation-free from inlet to outlet. This pump is previously used in a dairy factory. Motor: 1,1 kW - 220/240 - 380/415 V - 50 Hz - 1.410/1.700 rpm - 4,5/2,4 A. Connections on the inlet/outlet: DN 50. Estimated capacity (based on motor power, gear reduction unknown): +/- 1.000 ltr/h., Key Advantages:, - Valve-free design with stable, proportiona ...

feed pressure: 9,8 bar : 2,39 m³/min Number of working hours: ca. 85.410 h total power requirement: 15 kW weight of the machine ca.: 0,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine is equipped with a tailstock, a Multifix clamping system and a 3-jaw chuck, diameter: 300 mm, incl. two steady rests. Year of Manufacturing: presumable 2018

The machine is equipped with a tool holder, a tailstock, and a 3-jaw chuck, diameter: approx. 310 mm. • centre distance over bed: 300 mm • centre distance over support: 200 mm

Includes a 3-jaw chuck, jaw width: 250 mm, tailstock, Multifix basic holder as well as a 3-axis digital readout and a workbench with matching Multifix tool holders and two jaw chucks, indexable inserts, collets, and milling cutters. Additional technical specifications: • Center height over bed: 200 mm • Center height over support: approx. 110 mm • Center height over cross support: approx. 90 mm

• centre length: 1000 mm • centre height over bed: approx. 250 mm • centre height over support: 150 mm • Incl. steady rest.

The machine is equipped with a tailstock, a Multifix tool post, and a quick-action chuck, including a 3-axis digital readout system manufactured by FAGOR.

The machine is equipped with a tailstock, a Multifix clamping system and a 3-jaw chuck, diameter: 300 mm, incl. two steady rests. Year of manufacturing: presumable 2018

Incl. refrigerated air dryer from the manufacturer AIRCRAFT.