pvc twin screw used for sale

Offer 24177 Specifications: - Tip height 180 mm - Center width 1000 mm - larger circulation – Ø over bed 355 mm - via flat sleds approx. 200 mm - Spindle bore 36 mm - Pick-up cone of the tailstock quill MK 5 - Travel of the tailstock quill 260 mm - Spindle speeds 18 - 1800 rpm -Feeds - Travel of the cross slide approx. 200 mm - Travel of the upper slide approx. 115 mm - Drive 400 V / 5.8 kW - with: - Tailstock, 3-jaw lining, bezel - Steel holder, moving center punch, - Chip tray - Space requirement approx. W 2500 x H 1500 x D 1200 mm - Weight approx. 2100 kg

Stainless steel screw conveyer length: 15 meters. Diameter: 500mm. With drive electric motors, APV valves, protective covers and accessoiries. Dismantled into 3 lengths.

Lift-tilt system height: 8,20m. Tilt system inlet dimensions: 1100 x 1200 x 1750mm Euromorm.

Total weight 32780 kg net approx. 29500 pieces More info on request 8.8 DIN 931 Origin: South Korea

DC motor Stromag 70 kW, gearbox 2 x 960 Nm, with Coperion ZSB 70 side feed. The worm shafts and the end head are missing. Therefore, sales as spare parts carriers.

Motor power 11kW/ max. ultimate pressure 13bar Regular maintenance

Engine power 11 kW / max. final pressure 13bar Regular maintenance Engine should be replaced promptly

Screw conveyor, screw conveyor, screw conveyor, discharge screw - Type: Tubular auger - Screw length: 6024 mm - Drive motor: 3.00 kW - Speed: see nameplate - Housing: Galvanized steel - Screw conveyor: stainless steel 1.4301 - Screw conveyor: Ø approx. 490 mm

: 0390 mm : 240 mm : 1250 mm : 190 mm : 54 mm : 5,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Screw press for cold pressing of oilseeds - Manufacturer: Reinartz - Type: AP 10/06 - Power: 7.5 kW - Processing capacity (rapeseed): 100 kg/h - Processing capacity (other oilseeds): 70 kg/h - Length: 1900 mm - Width: 600 mm - Height: 1100 mm - Weight: 900 kg

turning diameter over bed: 250 mm turning diameter over slide rest: 145 mm turning length: 550 mm center height over bed: 125 mm centre distance: 550 mm bed width: 135 mm spindle bore: 26 mm turning speed range - stepless: 50 - 2.000 U/min power requirement: 750 W 3-jaw-chuck diameter: 125 mm taper in tailstock-quill: MK 2 dia. of quill: 30 mm quill stroke: 70 mm voltage: 230 V weight of the machine ca.: 120 kg dimensions of the machine ca.: 1,25 x 0,60 x 0,50 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 420 mm turning diameter over slide rest: 290 mm turning length: 900 mm turning diameter in the gap: mm turning speeds: 40 - 2000 U/min centre height: 210 mm spindle bore: 38 mm total power requirement: 4,0 KW weight of the machine ca.: 0,9 t dimensions of the machine ca.: 2,4 x 1,1 x 1,3 m Lead and feed spindle lathe - 3-jaw chuck 220mm - Quick-change tool holder with 5 cassettes - Steady rest - Chip tray - Operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 400 mm turning diameter over slide rest: 280 mm turning length: 1000 mm turning diameter in the gap: mm turning speeds: 70 - 2000 U/min centre height: 195 mm spindle bore: 54 mm tailstock quill taper MT: 3 MK connected load frequency: 400 V total power requirement: 2,2 kW weight of the machine ca.: 0.85 t dimensions of the machine ca.: 1,95 x 1,0 x 1,75 m Professional industrial machine 3-axis digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 280mm Bezel fixed Bezel rotating 4-fold steel holder. Halogen machine light Machine light Foot brake removable chip tray, chip protection wall Hardened and ground bed rails Complete coolant system Feed protection Machine feet Machine tool The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Center distance 11,000 mm Turning diameter 730 mm Drill height 500 mm turnable on the bench 1050 mm Motor power 22 kW

turning diameter over bed: 400 mm centre height: 195 mm turning diameter over slide rest: 246 mm turning length: 650 mm spindle turning speed - stepless: 0-2500 U/min total power requirement: 7,5 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: 2x1.3x1.6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 270 mm turning diameter over slide rest: 130 mm turning length: 500 mm spindle turning speed - stepless: 40-3000 U/min weight of the machine ca.: 1 t dimensions of the machine ca.: 1.5x0.8x1.7 m Digital read-out HEIDENHAIN Misc.accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 360 mm centre height: 170 mm centre distance: 650 mm turning dia. over face-slide: 196 mm spindle bore: 42 mm inner taper MT: 5 spindle turning speed - stepless: 20-3250 U/min weight of the machine ca.: 1,6 t dimensions of the machine ca.: 200 x 125 x 165 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Center distance 5,000mm Height of the tips 600mm 105mm bar passage carriage equipped with grinding Machine in very good condition

Conveyor system for powder products. Stainless steel housing with stainless steel tube. Motor mounted at bottom of machine with screw feeding device. Infeed hopper with 230 liter volume. Capacity 3 to 5 m?/h depending on product. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Screw Conveyor system for powder and very small granule products. Stainless steel housing with stainless steel tube. Motor mounted at bottom of machine with screw feeding device. Infeed hopper with 200 liter volume and vibrating motor to assure product flow. - Specification: capacity: up to 3 m?/h depending on product, suitable to dose up to 5kg/filling | discharge height: ca. 1.850m | standard angle: 45? | diameter of pipe: 114mm | power: 380V, 0.81kW | machine dimensions: size is depending on final customized system (hopper, conveyor length and angle can be customized - also optional: mixing device) | weight: ca. 130kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50  ...

Screw Conveyor system for powder and very small granule products. Stainless steel housing with stainless steel tube. Motor mounted at bottom of machine with screw feeding device. Infeed hopper with 200 liter volume and vibrating motor to assure product flow. - Specifications: capacity: up to 5 m?/h depending on product, suitable to dose up to 10kg/filling | Discharge height: ca. 1.850mm | standard angle: 45? | diameter of pipe: 141mm | Power: 380V, 1.56kW | machine dimensions: size is depending on final customized system (hopper, conveyor length and angle can be customized - also optional: mixing device) | weight: ca. 170kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30- ...

with 4 capping heads Type: 97 Capacity: approx. 8,000 - 10,000 bph

Offer 25979 Operating hours 16550 h - Operating pressure 10 bar - Delivery rate 15.9 l/sec - Drive 400 V / 7.5 kW - Motor speed 3000 rpm - Air tank 250 L - Space requirement approx. W 700 x H 1830 x D 1050 mm - Weight approx. 250 kg

: 0460 mm : 270 mm : 1500 mm : 230 mm : 76 mm : 11 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tip width: 430mm Tip Height: 120mm Spindle bore: 23mm Spindle speeds: 60-3000 RPM Short taper spindle head DIN 4 Tailstock MK2 Feeds from 0.03 to 2.5 mm Weight approx. 360 kg New Aikron 3-axis digital display, brake of spindle motor renewed, technically checked. Accessories: Collet device, lathe chuck Quick-change steel holder 

Stock number: PM1063, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Eccentric screw pump, Construction: On a stainless foundation, Motor: 0,5 kW - 220/380 Volt - 670 rpm., Theoretical capacity: 1000 l/h, Stage: 1, Working pressure : Max 4,5 bar, Dimensions inlet: Ø 1, Dimensions outlet: Ø 1, Manufacturer: Mono, Type: MD 30

Stock number: D1223, Material: Galvanized, In stock: Yes, Amount in stock: 1 pc., Item: Screw conveyor, O-profile: Yes, Dimensions: Ø 100 x L 2980 mm, Motor: 1,1 kW - 220/380 Volt - 388 rpm., Dimensions inlet: Ø 150 mm, Dimensions outlet: Ø 150 mm

Stock number: PM1574, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Eccentric screw pump, Construction: On a stainless foundation, Motor: 2,2 kW - 380/660 Volt - 1415 rpm., Theoretical capacity: 6000 l/h., Stage: 1 , Working pressure : Max 4,5 bar, Dimensions inlet: Ø 1½, Dimensions outlet: Ø 1½, Manufacturer: Mono, Type: MH40 D8

Stock number: D998, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Screw conveyor, U-profile: Yes, Dimensions: Ø 310 x L 1930 mm., Motor: 3 kW - 220/380 Volt - 61 rpm., Screw: Dosage screw, Diameter: Ø 60 mm

Stock number: D999, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Screw conveyor, O-profile: With inlet hopper, Dimensions: Ø 250 x L 2180 mm, Motor: 2,2 kW - 220/380 Volt

Stock number: D971, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Screw conveyor, O-profile: Yes, Dimensions: Ø 170 x L 1580 mm, Motor: 1,5 kW - 220/380 Volt - 71 rpm.

Stock number: D936, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Dewatering screw conveyor, Dimensions: Ø 400 x L 3800 mm, Dimensions inlet: L 630 x B 430 mm, Dewatering screen: L 2000 mm with 5x20 mm slots, Motor: 5,5 kW - 400/690 Volt - 65 rpm., Manufacturer: IRAS A/S, Type: TU

Stock number: D654, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Screw conveyor, O-profile: Yes, Dimensions: Ø 160 x 2050 mm, Motor: 2,2 kW - 380 Volt - 70 rpm., Other: Ø 250 mm outlet with bag squeezer

Stock number: D656, Litre: 100 , Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Screw conveyor, Diameter: Ø 60 mm., Motor: 1,1 kW - 380/420 Volt - 397 rpm., Manufacturer: BM Silo Ltd., Other: Product funnel with flexible screw

Stock number: D653, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Screw conveyor, O-profile: Yes, Dimensions: Ø 140 x L 1950 mm, Motor: 1,1 kW - 220/380 Volt - 18,8 rpm.

Stock number: D605, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Screw conveyor, O-profile: Yes, Dimensions: Ø 250 x L 1950 mm., Motor: 1,1 kW - 220/380 Volt - 6,2-43 rpm., Dimensions inlet: Ø 230 mm., Dimensions outlet: 940 x 250 mm.

Stock number: D609, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Screw conveyor, Dimensions: Ø 250 x L 3380 mm, Other: Trough-type

Stock number: D563, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Screw conveyor, O-profile: Yes, Dimensions: Ø 138 x L 1015 mm., Motor: 1,3 kW - 1700 rpm., Manufacturer: BENA, Year: 1996

Stock number: D513, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Vacuum screw conveyor, Dimensions: Ø 150 x L 2250 mm, Motor: 2,94 kW - 22,5-158 o/min., Manufacturer: Gerivac, Other: Prepared with zone for vacuum

Stock number: D429, ., Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Screw conveyor, O-profile: Yes, Dimensions: Ø 210 x L 1500 mm, Motor: 0,55 kW - 220/380 Volt - 52 o/min.

Stock number: D2025, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Screw conveyor, U-profile: Yes, Dimensions: Ø 320 x L 1720 mm, Motor: Estimated 1,5 kW - 380 Volt

Stock number: D1195, Material: Stainless steel AISI 304/steel 37, In stock: Yes, Amount in stock: 1 pc., Item: Screw conveyor, U-profile: Yes, Dimensions: Ø 230 x L 2000 mm, Motor: 1,1 kW - 220/380 Volt - 28 rpm.

Stock number: D1181, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Screw conveyor, Standing: Obliquely placed on legs, U-profile: With lid and washing pipe, Motor: 0,55 kW - 220/380 Volt - 121 rpm., Manufacturer: Meyn

Stock number: D1154, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Screw conveyor, Dimensions: Ø 130 x L 3050 mm., Motor: 1,1 kW - 230/400 Volt - 60 rpm.

Stock number: D1122, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Screw conveyor, O-profile: Yes, Dimensions: Ø 140 x L 1580 mm, Motor: 0,37 kW - 380 Volt

Stock number: D1118, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Screw conveyor, U-profile: With 3 pcs. of removable lids, Dimensions: Ø 125 x L 2500 mm., Motor: 0,75 kW - 220/380 Volt - 133 rpm.

Stock number: D1042, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Screw conveyor, Standing: In leg rack, U-profile: With lid and inlet hopper, Dimensions: Ø 250 x L 1730 mm, Motor: 2,2 kW - 380/415 Volt - 64 rpm., Manufacturer: Schlösser GmbH Anlagentechnik

Stock number: D1117, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Screw conveyor, U-profile: Yes with lid, Double jacket: Yes, Insulated: Yes, Dimensions: Ø 300 x L 4170 mm, Motor: 1,5 kW - 230/400 Volt - 26,24 rpm., Other: Outer fully welded stainless cladding

WHEELED SCREW CONVEYOR to charge TANKER TRUCKS, for plastic granules, capacity ca.60 m3/h, Constructed in carbon steel with antirust painting, Outer Ø 300 mm, Bearing casing with dust seals, loading hopper 1.000 x 1.000 mm., 7,5 kw gearmotor, wheeled supporting structure, Total screw length 7,0 mt., Discharging height 4,5 mt., flexible pipe with capacity sensor on discharge, complete with control panel, CE compliance, Users manual, Electrical drawings., ALSO AVAILABLE IN STAINLESS STEEL VERSION, See other similar items with different features [GE751](.germanplast/listings/7506589-wheeled-tanker-loading-screw-con veyor-basic)[-GE753](.germanplast/listings/7553224-wheeled-tanker-load er-adj-height-with-automatic-retractable-sleeve)[-GE750](.germanplast/ listings/6874982-tanker-loading-system-60-m3-h-automatic-retractable-s leeve), installed power - used power in work: about 60-65% : 7,5,  ...

Stock number: PM2076, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Eccentric screw pump, Inlet: Flange L 350 x W 180 mm., Motor: 1,5 kW - 220/380 Volt - 186 rpm., Theoretical capacity: 1000 l/h., Manufacturer: Seepex, Type: BT 2-12, Other: Screw feeding