pvc twin screw used for sale

Rotary screw air compressor Atlas Copco ZR 250 oil-free 250 kW, 7.5 bar, 43.40 m3/min. water cooled

Compressed air screw compressor Kaeser DSD 201 SFC 110 kW, 10 bar, 17.60 m3/min. Frequency controlled, volume flow 3.99 - 17.60 m3/min. screw element new in 2010 and has 24000 hours

Rotary screw air compressor Kaeser DSD 201 SFC Variable speed drive. Volume flow 3,99 - 17,60 m3/min. Air end new 2010 and has 24000 working hours.

Air screw compressor Atlas Copco ZR 400 oil-free 400 kW, 7.5 bar, 62.90 m3/min. oil-free, water-cooled

Rotary screw air compressor Atlas Copco ZR 400 oil-free 400 kW, 7,5 bar, 62,90 m3/min. oil-free, water cooled

Rotary screw air compressor Atlas Copco ZH 6-5 oil-free 900 kW, 8.8 bar, 150 m3/min. oil-free, water cooled, Voltage 6000 V/50 Hz, Volume flow 83-150 m3/min. Inclusive adsorption dryer AH 16

Air Screw Compressor Atlas Copco ZH 6-5 Oil-free 900 kW, 8.80 bar, 150 m3/min. oil-free, water-cooled, voltage 6000 volts/50 Hz, volume flow 83 - 150 m3/min. Inclusive adsorption dryer AH 16

Compressed air screw compressor Kaeser FS 440 250 kW, 7.5 bar, 46.10 m3/min.

Rotary screw air compressor Kaeser FS 440 250 kW, 7,5 bar, 46,10 m3/min.

Compressed air screw compressor oil-free Atlas Copco ZR 110 FF 110 kW, 7.5 bar, 18.70 m3/min. oil-free, water-cooled. With integrated compressed air adsorption dryer.

Rotary screw air compressor Atlas Copco oilfree ZR 110 110 kW, 7.5 bar, 18.70 m3/min. oil-free, water cooled. With built-in adsorption compressed air dryer.

Mild steel, length. 10.20 m Diameter: 420 mm, spout: 300 X 300 mm,. Drive: gear motor 7,5 kW Max. 135 RPM

Air screw compressor oil-free Atlas Copco ZH 6-5, 900 kW, 8.8 bar, 150 m3/min. Oil-free, water-cooled, voltage 6000 V, 50 Hz. Volume flow 83 - 150 m3/min. Including adsorption dryer AH 16

Semi-automatic screw to the seal of screw-type caps.Tick count of 0-15 PCs / ProduktabhängigAuslösung of the photo-electric cell screwing process.

Rotary screw air compressor Atlas Copco ZH 6-5 oil-free 900 kW, 8,8 bar, 150 m3/min. Oil-free, water cooled, Voltage 6000 V, 50 Hz. Volume flow 83 - 150 m3/min. Inclusive adsorption dryer AH 16

Rotary screw air compressor oil-free ZT 50 VSD 50 kW, 8,60 bar, 7,32 m3/min. Oil-free, air cooled, variable speed drive, Volume flow 2,0-7,32 m3/min. LP and HP element 1 x replaced.

Compressed air screw compressor oil-free Atlas Copco ZT 50 VSD 50 kW, 8.60 bar, 7.32 m3/min. Oil-free, air-cooled, frequency-controlled, volume flow 2.0 - 7.32 m3/min. Low pressure and high pressure elements replaced 1 x.

Attachment: eccentric screw pump used Manufacturer: Netsch Type: NE 30 A Commissions No.: 305699 Machine number: 115945 Year of construction: 1980 Capacity: 2, 1 m³/h at 6 bar Speed: 355 1/min

Attachment: eccentric screw pump used Manufacturer: Allweiler Type: SNP 25.1 Version: H1P01 Machine number: 7655566/2 Year of construction: 1982 Capacity: 10L / min Speed: 230 RPM

Air screw compressor Atlas Copco ZR 250 oil-free 250 kW, 7.50 bar, 43.40 m3 rpm, oil-free, water-cooled

Rotary screw air compressor Atlas Copco ZR 250 oil-free 250 kW, 7.50 bar, 43.40 m3/min, oil-free, water cooled

Air Screw Compressor Atlas Copco GA 355 355 kW, 7.5 bar, 63.10 m3/min

355 kW, 7.5 bar, 63.10 m3/min

132 kW, 10.0 bar, 18,0 m3/min.

132 kW, 10.0 bar, 18.0 m3/min.

Iddon Cold Feed Extruder. 2.5" screw dia. 10/1 LD Ratio. Motor Size 20.4/5.5 HP

Air screw compressor Atlas Copco ZR 300 oil-free 315 kW, 8.0 bar, 46.4 m3/min.

Rotary screw air compressor Atlas Copco ZR 300 oil-free 315 kW, 8,0 bar, 46,4 m³/Min.

Air screw compressor Atlas Copco ZT 22 oil-free 22 kW, 8.6 bar, 2.8 m3 rpm, air-cooled Low and high pressure element 1x replaced.

Pipe screw, screw conveyor, cement screw, dosing screw used for cement, fly ash, sand, lime, cereals or similar materials Conveying length (from inlet to outlet): approx. 2.5 m Diameter Ø: approx. 260 mm Slope approx. 120 mm Spiral height approx. 90 mm Spiral plate approx. 8 mm Inlet / outlet: approx. Ø 260 mm Remote storage with stuffing box Drive with gear motor 4 kW 68 rpm Total dimensions: approx. 3700 x 450 x 550 mm Due to the stable construction, the screw is suitable for abrasive substances. Thanks to our own special machine construction, changes can also be made. We have various pipe screws in different lengths, slopes and diameters from a large mortar and plaster mixing plant. Of course, also various other components, such as filters, elevators, weighing containers... Changes and errors in the technical data, information and prices as well as prior sa ...

Rotary screw air compressor Atlas Copco ZT 22 oil-free 22 kW, 8,6 bar, 2,8 m3/min, air cooled. LP and HP element 1x replaced.

Air screw compressor oil-free Atlas Copco ZR 355, 355 kw, 10.00 bar, 50.70 m3 rpm, with soft start

Rotary screw air compressor oilfree Atlas Copco ZR 355 355 kw, 10,00 bar, 50,70 m3/min, with soft start

Extrusion press with 400 mm , drive 55 kW, hard casting screw wings and pre-press PZSVG 40 (Built 1996, drive 15 kW), on 4 hydraulic spindles. Complete with 1 spare part set screw and reel.

Air screw compressor Atlas Copco oel-free ZR 160 VSD FF 160 kW, 10.40 bar, water-mounted, with frequency inverter, with built-in adsorption dryer, volume flow 6.9 - 24.4 m3/min.

Rotray screw air compressor Atlas Copco oil-free ZR 160 VSD FF 160 kW, 10,40 bar, water cooled, variable speed drive. With built-in adsorption dryer. Volume flow 6,9 - 24,4 m3/min.

Air screw compressor Atlas Copco oel-free ZT 250 250 kW, 7.5 bar, volume flow 42.10 m3/min oel-free, air-cooled

Rotary screw air compressor Atlas Copco ZT 250 oil-free 250 kW, 7,5 bar, Volume flow 42,10 m3/min. oil-free, air cooled

System: eccentric screw pump Manufacturer: REWA Type: R20-2 Year: 2014 Flow rate: 0.8 m ³/h Pressure: 12 bar Speed: 960 rpm Motor: 1.5 kW / adjustable Other: hopper Material: Main body steel Shaft: Stainless steel Stator: Stainless steel Rotor: Stainless steel Shaft seal: Rubber Condition: The pump has no hours of operation and is as good as new

Compressed air screw compressor oil-free Atlas Copco ZR 400 400 kW, 10 bar, 56.3 m3/min

REWA R35-2 Product no.: RE-HU-2015-0901-PEC2 System: eccentric screw pump Manufacturer: REWA Type: R35-2 Year: 2014 Flow rate: 8 m ³/h Pressure: 12 bar Speed: 960 rpm Motor: 4 kW / adjustable Other: hopper Material: Main body steel Shaft: Stainless steel Stator: Stainless steel Rotor: Stainless steel Shaft seal: Rubber

Rotary screw air compressor Atlas Copco ZR 400 oil-free 400 kW, 10 bar, 56,3 m³/min

Brand new machine designed for screwing reinforcements in PVC profiles. - simultaneous operation of both screwing units - separately adjustable distance between screwdrivers 250-540 mm - automatic screw feeding - automatic disconnection of the feeder movement - screw depth sensor - foot switch control Additional equipment: - machine base - pick-up rollers - pneumatic impulse to the feeder (13mm), preventing jamming of the screws in the feeder at the entrance and exit - feed force pressure reducer - additional manual slot for various screws - extended travel +30 mm to 130 mm - laser positioning pointer - screw depth sensor - horizontal pressure

Epson G10-854SR Robot Screwdriving Station Dosing Station Assembly of parts for car radios and navigation systems and for testing them. The assembly station is designed as a closed aluminium frame with a steel welding frame inserted and has a very compact design. The control cabinets and valve terminals are integrated into the system. All movement processes during the operation of the system can be tracked on all sides through large windows and doors. Operation is via a touch screen. The assembly station is divided into substations 3.1 dosing area, 3.2 assembly area KK+SW and 3.3 mounting area front. (KK=heat sink, SW=bulkhead angle) The work steps according to these assembly areas are described below: St.3.1: Dosing range - a WT with attached chassis and printed circuit boards enters the dosing area via the transfer belt. - this is stopped at the stroke positioning ...

WSM Stationary screwdriving unit screwdriving station Assembly of parts for car radios and navigation systems and for testing them. The assembly station is surrounded by a protective enclosure. The service doors are equipped with interlocking monitoring switches. The doors are locked in automatic mode and can only be opened when the automazik stop or in manual mode after pressing the doors on the control panel. When the door is open, automatic operation cannot be started. Functional sequence The station is equipped with the pre-assembled assembly via the transfer belt. The work steps of the automatic station with a run of a WT are described below. In normal operation, all 3 stations work in parallel. - Positioning the WT with the pre-assembled assembly in St.2.1 - Lowering the wearer with the scanner and the vision sensor - Scanning of the 3 codes (front panel, fro ...

Tip height: 330 mm centre distance: 1500 mm circular diameter: bed 690 mm spindle bore: 82 mm spindle retainer: short taper size 8 taper tailstock: 6 MK spindle speed: 7.1-1400 rpm feeds: longitudinal/plan 0.05 112/0.025 56 mm / U thread pitches: 0.25-560 mm electrical connection: 380 V, 15 kW space: 3350 x 1800 x 1400 mm weight: 4800 kg

Tip height: about quilt 300 mm centre distance: 1500 mm circular diameter: upper bed 640 mm spindle bore: 67 mm spindle retainer: Gr. 8 taper tailstock: 5 MK spindle speed: 18 - 900 rpm feeds: longitudinal/plan 0.063 0.032 2.1 mm / U thread pitches: 0.5-14 mm electrical connection: 380 V, approx. 7.5 kW space: 1550 x 3100 x 1250 mm weight: approx. 3500 kg hardly used and therefore well-preserved bed lathe

Tip height: 107 mm top width: 350 mm circular diameter: bed 200 mm spindle bore: 25 mm taper tailstock: 2 MK spindle speed: 35 - 3500 rpm feeds: longitudinal and mm/U thread pitches plan: 0.2-3 mm electrical connection: 380 V, approx. 2.2 kW space: 600 x 1300 x 1230 mm weight: 850 kg

Normal steel Volume: 25 litres, drive: 3 kW

Pipe conveyor screw with 270 mm diameter and 5,200 mm conveyor length (measured from center inlet to middle outlet). Drive 5.5 kW via intermediate gearboxes of gearbox construction north and claw coupling. Tree speed: 49 UPM; Spiral rise: 125 mm.