130,792 used machines on RESALE, but how to find them? Machine Search
Complete solution for the transport of bulk materials such as wood chips, wood pellets, shredded material, granules, etc. Aluminium angled conveyor belt incl. substructure horizontal area 2,500mm Ziruu8vxy Rising area 2,400mm Angle in bend 45° Feed height: 300mm Discharge height 2,000mm Total conveyor belt length measured on the floor: 4,200mm Conveyor belt width 500mm PVC conveyor belt incl. cleats and corrugated edge Propulsion: Motor 0.55KW Speed approx. 0.3-0.5m/sec Connection 400/240V, 50Hz IP54 protection Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Scalloped edge: 50x35mm 25 pcs T-40 cleats - 396mm pitch 2-ply particularly transversely stable Usable width: 290mm, results as follows: Transverse arrangement 70+35+290+35+70mm ONLY AS LONG AS STOCKS LAST All our prices are net prices plus VAT. - can a ...
Year: 2020 - technically efficient, ready to work - after full service - automatic feed - disc diameter: 400 mm - cooling system - disc rotation 45/90/135° and tilt 45° - vertical and horizontal pneumatic pressure - compressed air preparation station
PVC PROFILE EXTRUSION LINE EVC BRAND, single screw extruder with 60 mm 28 LD, constructed in 1998, for 180 mm max width, 44 kw drive, control panel, Calibrating desk 3,7 m.long with 1 x 9 kw.pump, Caterpillar pull off unit, 180 mm wide, saw, 6,0 mt.long discharging table.
This concerns an unused product. Auction-ID: A1-46064-32
BATTENFELD EXTRUSION LINE FOR PVC, EVA,.., including:, PAPENMEIER MIXER, type TSEH 200/KMSU 400 L, construction year 1991, Electrical power heating 30/35 kw - Cold 6,0/7,5 kw, including supporting structure, Total dimensions LWH : 2.4002.6502.550 mm., Weight : about 3.000 kg., BATTENFELD EXTRUDER, metal detector, feeding unit, barrel with screw 150 mm., 7 heating areas, 5 cooling fans, Assea 110 kw Drive, vacuum degassing pump, screenchanger 2x 90 mm.Ø, heating 4,0 kw, Gneuss temperature probes, hydraulic power station 2,3 kw, air pelletizer, variable speed, self adjusting knives, 1,5 kw drive, adjustable pressure, extra (Bausano cutting system with inverter), pellets cooling unit, vibrating screen with one air turbine on each side, Constructed in 1989, Documents available, offered AS IS WHERE IS or CHECKED., CUTTING: AIR
Length 275 cm; Total approx. 880 pieces Auction-ID: A1-46266-356
This concerns an unused product, 4x50 mtr unused Auction-ID: A1-46064-34
n°1 Balacchi BR4SSB PVC welding machine Year 2004 -n°1 Balacchi BR12PT PVC welding machine year 199
PREZ-MET PVC and aluminium window production line is a state-of-the-art and comprehensive solution for the mass production of windows. The system enables complete machining of PVC and aluminium profiles within a single working cycle. The production includes all key stages – from precise profile cutting, through milling, drilling, welding to final cleaning of the elements. The PREZ MET window production center is made up of three smaller integrated production lines – one line for the production of window frames and two lines for the production of window sashes. They consist of machines from renowned manufacturers from 2005-2016: – ROTOX ZSA 263 cutting center – PREZ-MET FS 50 end milling machine – PREZ-MET 42 MP copy milling machine – PREZ-MET ZGP 420 four-head welding machine (3 pcs) – PREZ-MET ZGP 380E two-head welding machine (2 pcs) – PREZ-MET ZG 940 single-he ...
Screw Diameter: 140 mm // Throughput: 900 kg/h
Screw Diameter: 92 mm // Throughput: 800 kg/h
Screw Diameter: 130 mm // Throughput: 800 kg/h
Screw Diameter: 50 mm // Throughput: 150 kg/h
Roll-off trolley for PVC strapping Stable, mobile roll-off trolley for PVC strapping. With large belt drum, mechanical unwinding brake and integrated storage box for sealing sleeves and accessories. Suitable for PVC tape rolls. Used, functional, with usual signs of wear. • Reel Ø: approx. 59 cm • Height: approx. 94 cm • Strip width: approx. 12–16 mm PVC tape Auction-ID: A7-46417-32
15 Coils 350 m each Operating temperature 70° Diameter 7 mm Thickness 0.6 mm Auction-ID: A7-46479-36
23 Coils 400 m each Operating temperature 105° Diameter 6 mm Thickness 0.6 mm Auction-ID: A7-46479-37
New;Size: L18.3xW10xH5.2m. PVC900g Auction-ID: A7-46458-78
Length 275 cm; rebate 10 mm; white; total approx. 450 pieces Auction-ID: A1-46266-477
SKU: MEMTUEL-GESL-PVC-SCHW-29X36,5X43X2,2MM WÜRTH PN: 561662143 Auction-ID: A1-46694-409
Overview Lot 41 – Folding cones for road marking: 41 medium cones and 6 small cones, made of flexible PVC with a weighted square base. Technical details - Material: Flexible PVC - Design: Pop-up accordion body - Base: Square weighted for stability - Visibility: Two horizontal reflective stripes - Use: Temporary traffic control, roadworks, risk signage and safety zones - Application: Indoor and Outdoor - Feature: Lightweight and easy to carry Included Accessories - Not specified Status and location New material – sold as is, without warranty. Auction-ID: A7-45941-4
These include: Geberit, Dyka plastic pipes, various diameters, bends, welding fuses, wooden racks and residual material included. Auction-ID: A1-46651-65
Crossing pipes in different lengths and wall strands in stock Price depending on wall thickness and length
Offer via gebr. outdated pipe cutting and chamfering machine Fabr. GF GEORG FISCHER Type RA8 / RA230 Saw has been completely overhauled and tested. - completely new engine. - Gearbox re-stored and new seals Technical data: Outer pipe diameter 124-230mm (4" - 8") Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 40 - 215 rpm. Speed levels electronically 1 - 6 Power 1800 W incl. mounting plate used, in good condition.
Offer via gebr. outdated - pipe separation and chamfering machine Fabr. GF Type RA4 Saw has been completely overhauled and tested. - Engine re-stored and new seal. - Gearbox re-stored and new seals Technical data: Outer pipe diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270 rpm. Speed levels electronically 1 - 6 Power 1600 W incl. mounting plate used, in good condition.
Offer via gebr. outdated - pipe separation and chamfering machine Fabr. GF Type RA4 Saw has been completely overhauled and tested. - Engine re-stored and new seal. - Gearbox re-stored and new seals Technical data: Outer pipe diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270 rpm. Speed levels electronically 1 - 6 Power 1600 W incl. mounting plate used, in good condition.
Offer via gebr. Pipe cutting and chamfasing machine Make GF GEORG FISCHER type RA41 (orbitalum) specifications: Tube outsend diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270rpm. Speed levels electronic 1 - 6 Power 1600 W incl. mounting plate and chassis used, in good condition.
Offer via gebr. refurbished - pipe cutting and chamfing machine Fabr. GF Type RA6 Saw was completely overhauled and tested. - Engine completely new - Gearboxes restored and new seals specifications: Pipe outer diameter 75-183mm Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 40 - 215 rpm. Speed levels electronic 1 - 6 Power 1800 W incl. mounting plate used, in good condition.
Offer via gebr. Pipe cutting and chamfering machine Fabr. GF Type GF20 AVM with lifting table Specifications: Pipe outer diameter 283-508mm Wall thickness 1 - 15mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 50 - 163 rpm. Speed levels electronic 1 - 6 Power 1800 W
Offer via Gebr. Tube cutting machine Fabr. GF GEORG FISCHER Type RA12 Specifications: Pipe outer diameter 215-325mm Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed Speed levels electronic 1 - 6 Power 1600 W used, in good condition.
Specifications: Tube outer diameter 124-230mm (4" - 8") Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 40 - 215 rpm. Speed stages electronic 1 - 6 Power 1800 W Feed module AVM 0.1 - 2.3 rpm incl. feeding unit and auxiliary unit used, in good condition.
The scope of delivery includes: 01x Rectangular tube, used Profile dimensions: approx. 50 x 30 mm Material color: orange Total length: approx. 3,660 mm Center-center hole: approx. 3,630 mm Material thickness: approx. 1.50 mm Number of boreholes: 2 pcs. Drill holeØ: approx. 10 mm Weight / pcs.: 6,150 kg Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. In addition, a desired transport or shipment of this article is with additional costs, which are charged separately depending on the place of delivery. or scope of delivery can be queried from us.
Offer via gebr. overhauled pipe cutting and chamfering machine Fabr. Georg Fischer / Orbitalum Type RA8 Year of construction 2007 Specifications: Tube Outer Diameter 124-230mm (4" - 8") Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 150 - 270 rpm. Electronic speed levels 1 - 6 Power 1600 W incl. mounting plate, assembly table used, in good condition.
Manual Pipe Bending Machine, Pipe Bending Machine, Mandrel Bending MachineHand Pipe Bending Machine, Hand Wire Bending Machine, Bending MachineManufacturer: MEWAGing Power: max. 16 mm1 piece bending tool 15 mm with 25 mm bending radius1 piece bending tool 10 mm with 16 mm bending radius1 piece bending tool 8 mm with 9 mm bending radius1 piece bending tool 6 mm with 8 mm bending radius1 piece bending tool 5 mm with 8 mm bending radius- Turning plate with degree marking- Scope of delivery as shown- Wooden box for storageDimensions L x W x H: 570 x 480 x 145
The scope of delivery includes: 01x Rectangular tube, used Material colour: orange Overall length: approx. 1,980 mm Center – center hole: approx. 1,935 mm Profile dimensions: approx. 52 x 42 mm (WxH) Material thickness: approx. 2.00 mm Borehole Ø: 9 mm Weight: 5.04 kg | Pcs. General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.
Combined belt grinding and pipe grinding machine with - Abrasive belt K 40 - with 7 sanding rollers. 20, 28, 32, 41, 48, 60 and 76mm Sanding belt direction left/right Belt width 100 mm Belt length 2000 mm Belt speed 15/30 m/sec Tube diameter 20 - 76 mm Angle adjustable from - to 30 - 90 degrees Connection voltage 400 V Total power requirement 2.5 /3.3 kW Machine weight approx. 0.19 t Space requirement approx. 1.2 x 0.75 x 0.7 m Condition: never used / new (5)
Tube grinding/satin finishing machine - For sanding, satin finishing, and high-gloss polishing - Large wrapping angle of 270° for efficient work - Belt speed infinitely adjustable - Flexible and handy - perfect for railing construction Connection voltage 230Volt Power 800W Tape dimension 40 x 760mm For pipe diameters up to 180mm Condition: never used / new (5) Auction-ID: A7-46642-248
Combined belt grinding and pipe grinding machine with - Abrasive belt K 40 - with 7 sanding rollers. 20, 28, 32, 41, 48, 60 and 76mm Sanding belt direction left/right Belt width 100 mm Belt length 2000 mm Belt speed 15/30 m/sec Tube diameter 20 - 76 mm Angle adjustable from - to 30 - 90 degrees Connection voltage 400 V Total power requirement 2.5 /3.3 kW Machine weight approx. 0.19 t Space requirement approx. 1.2 x 0.75 x 0.7 m Condition: never used / new (5) Auction-ID: A7-46642-15
Combined belt grinding and pipe grinding machine with - Abrasive belt K 40 - with 7 sanding rollers. 20, 28, 32, 41, 48, 60 and 76mm Sanding belt direction left/right Belt width 100 mm Belt length 2000 mm Belt speed 15/30 m/sec Tube diameter 20 - 76 mm Angle adjustable from - to 30 - 90 degrees Connection voltage 400 V Total power requirement 2.5 /3.3 kW Machine weight approx. 0.19 t Space requirement approx. 1.2 x 0.75 x 0.7 m Condition: never used / new (5) Auction-ID: A7-46642-252
used pipe points cleaning master / atlas type 02V92 construction year: In 1993 nominal width: DN200 nominal pressure: PN100 manual: no
maximum number of results exceeded
please refine your search
1 € 
