pvc extrusion used for sale

Entire coextrusion line consisting of: - Bandera extruder 80 - 20 L / D - 60 kW, 400 V - year 1969 - variable V gearbox - Bandera extruder 80 - 20 L / D - 60 kW, 400 V - year 1965 - mechanical gearbox - 700 mm coextrusion table - Towing cutter, oven, Tecnofar exit tunnel with hydraulic variators - Omipa calender width 1000 mm with hydraulic variators - year 1976

Twin-screw extruder, parallel, counter-rotating Producer: AMUT Screw diameter: 92 mm L/D ratio 28:1 Drive motor: 60 kW (400V, 50Hz, 3ph) AC Two sets of screws (for ABS and PVC processing) Oil unit for thermostatting of PVC screws Number of cylinder heating zones 7 Number of heating zones of the head and adapter 5 + 1 number of cylinder cooling zones (air) 4 Without control (control components available)

Ghioldi extruder diam.80 low and medium density, original ALPINE 250 K/F IBC head. Oscillating towing on the frame, water-cooled towing cylinders, table width 1700mm, Cason treatment never used, automatic bubble guide, BST film aligner, bubble air replacement with IBC , air cooling with chiller, automatic spooler. Production varies according to the materials and external temperature, however, 220 kg/h can be reached. Doteco gravimetric system plus Moretto dosamaster. No. 01 new screw to be assembled, visible in operation, has worked a few days a month.

Specifications: Production line for EPE foam sheets EPE foam tube (optional; ask for the cost) Working hours 1200h, Like new, Include two changeable line for tube & sheet to one extruder L/D54, Include all auxiliaries (special pumps, spare parts, pipes e.t.c), To run immediately, Capacity 80 kg foam per hour Production: 500.000 m2 foam sheet per 20 days & 500.000 m foam tube 28 mm per 20 days Full equipment & complete without any other needs or auxiliaries Other Details: Guarantee: Without guarantee Current condition: Dismantled. Cant be seen in running condition Availability: Immediate Voltage: 90 Kw

Mixing and granulating line with twin screw extruder 2CV.70.HT/41D. PP, PA6, EPDM. Screw diameter 63, length 2800. Strand granulation, storage silo, turbo mixer, 4 weighing dispensers, injection molding machine, laboratory single screw machine. Lots of different equipment.

For sale a complete extrusion line in good condition, produced in 2004 by A + G Austria. Extruder KMD110 (Krauss Muffai) 1996 The line is designed for the production of a PVC window sill, 500mm wide, as well as a seamless panel with a width of 250mm. The appropriate extrusion tool is available. Line productivity 350kg / hour. The line allows you to process highly filled mixtures at a low cost. The set includes a screw loader. The cylinder augers after replacement have worked for 6 months

complete extrusion line for 3-layer Rolbatch film. The presented model has the catalog number 120/75 / 75-1800. The line is equipped with three extruders - ϕ120 (capacity -350 kg / h) and 2xϕ75 (capacity - 100 kg / h), screen changers, trapezoidal extrusion head, water tank, cooling unit, edge cutting device, winding devices and control system. Bolts, cylinders and long head are made of nitrided tool steel. The machine is operational, but is currently in storage and is not being produced. The most important technical data: Producer: Rolbatch Model: 120/75 / 75-1800 Sheet thickness: 0.3-0.5 mm Width:

AVITA EXTRUDER It is a single layer extruder with a single screw. Its production capacity is around 50/60 kg per hour. This machine is designed to make small and medium widths (with printing if necessary) in shrink or bundling. Year 2018 (commissioning 2020) very little served HD and comics production Maximum width 900 mm Double winder for film Micro perforation 2-color printing unit – 600 mm cylinder + sleeve cylinder 3 dies: 70 – 80 – 130 3 air rings 4-component Plast’control mixer

Single screw degassing extruder CFE-699-A-04 for polymers manufactured by KELLER (USA) and KOBE STEEL (Japan) under a DUPONT license. The extruder has the following parameters: Overall dimensions of the extruder, taking into account the gearbox and motor - length 12 meters, width -2.5 meters, height -1.5 meters, the total diameter of the casing with a heating-cooling jacket is 950 mm, the diameter of the screw is 600 mm, screw length -7800 mm. The average screw speed is 22-25 rpm. The total weight of the extruder without spare parts is 40 tons. The working pressure in the casing is up to 300 bar, the working temperature of heating the melt is up to 300 degrees. The casing of the extruder is heated by high temperature oil supplied to it. The average productivity of polymers is 50-100 tons per hour. The extruder is equipped with a parallel reducer of POWER-TECH INTERNATIONAL (FOOT-JONES)  ...

Granulation line consisting of: a system of gravimetric mixers TGP-5 for 4 components with pneumatic loaders of the TAL -920G brand 2018, with a capacity of 2x700 kg / h, an extruder Battenfeld BEX 2-107 / 22 with a receiving hopper, power -75 kW, productivity-600 kg / h; hot water ring cutting device, cyclone GXC2660 and storage hopper.

The complete line for extrusion of OMAM (co-extrusion) film consists of a set of devices that, in combination, enable the processing of thermoplastic materials, mainly polystyrene (HIPS) with a thickness of 0.2-2.5mm and a width of up to 1000mm (for film) and 0.5- 3.0mm and width up to 1000mm (for plates). Equipment production year 1996.   The main elements of the extrusion line are: dispensers TR 120 extruder TR 60 extruder flat head (nozzle) calender roller assembly extraction unit winder mill granulator console thermoregulation switchboard control panel  The maximum length of the extrusion line is 31.45m  Maximum embossing line width 7.88m  Maximum height of the extrusion line 4.01m  Technical data of TR 120 and TR 60 extruders cooperating with each other constituting an integral part of the device            ...

Bausano granulation line Parallel screws, diameter 140 mm Plate screen changer for 200 mm screens the machine has been heavily modernized. The frame and gear are from 1979, but the other elements have been replaced. 1. Plasticizing system - (screws + cylinder) - 2021 2. Control cabinet + all wiring + all sensors - 2022 3. The entire material feeding and dosing system - 2021 4. Screen Changer - 1998

Producer: Metalchem sp z o.o. (today ICHEMAD-Profarb sp. o.o., ichemad) A demonstration device, presented at the fair. Product: single-screw extruder with a head with a spiral core Purpose: for the production of single-layer HDPE pipes in the form of granules, up to a diameter of 250 mm The main technical parameters: extruder: - screw diameter 90 mm - the relative length of the screw 30d - barrier type barrier, high-performance for HDPE - installed power ~ 170 kW - design performance ≥ 450 kg / h   Head - number of heating zones 8 - heating power 33.4 kW (230V) - equipment: fitted mouthpiece and a core for the production of Ø180x16,4 pipes   Control system: The extruder is equipped with a microprocessor control and visualization system based on a central Allan Bradley controller with an industrial monitor with a function keyboard with standard contro ...

Extruder is missing electronics and it is not in running condition. Barrel 30D The barrel was opened for inspection of the liners and shafts, the hydraulics function correctly. Liner 1. Feed, 2.5D good condition Liner 2. Inter, 5.0D good condition Liner 3. Inter, 5.0D good condition Liner 4. Inter, 5.0D good condition Liner 5. Inter 5.0D good condition Liner 6. Inter 2.5D good condition Liner 7. XLT Discharge 5D good condition. Feed and return lines were removed and compressed air fed into circulation blocks. All blocks were found to have good flow. Pipework is in good condition with all solenoids present. All control thermocouples and melt thermocouples are in place but could not be tested due to condition of electrics. All the heaters are in place but could not be tested due to the condition of electrics. The barrel is in very good overall condition. Shafts Al ...

I am selling 2 extrusion machines, model sj35 and model sj45. complete production line. friendmachinery brand. ideal for creating filament and coils for 3d printers from pellets. offers are heard. shipments are not made. more information by private.

Two Blow film lines CMG 55 HTM Year of production 2011 1. Single screw extruder CMG 5530 - Screw diameter 55 mm - L/D ratio 30/1 - Extruder drive – 47 kW AC - Lever type screen changer 2. Blow film die BHP 20 F D 150 mm, LDPE, gap 1,6 mm, Biflux type 3. Double flow high performance Air ring CR400 - Blower for cooling ring 5.5 kW with inverter 4. Gusseting device 5. Fixed Take-off unit 6. Single station automatic winder 7. Film width 1000 and 700 mm Blow film double flow extrusion die BHP 20 F D 150 mm, LDPE, gap 1,6 mm, Biflux type Capacity: 80-100 kg/h depend if the material, thickness and size Film width: 1000 and 700 mm

Complete retrofitted line consisting of: Processable material: plasticized PVC composition active pay off passive pay off Bandera 4020 extruder retrofitted with Toshiba ivnerter cable and profile extrusion head 4 meter stainless steel tank double flywheel drive (interface on line with inverter) double reel winder for 600 reels

Extrusion line for blowing polymer films of type ABA, MODEL 2L800 Manufacturer RUIAN AOXIANG PACKAGING MACHINERY CO., LTD 2017 onwards Specifications 1. Film thickness: 0.01 - 0.1 mm; (Thickness: 8%) 2. Maximum film width: 800 mm 3. Recyclable materials: LDPE + CaCO3, PND + CaCO3, linear LDPE; CaCO3 content - maximum 40% 4. Maximum performance: 100 kg / h; 5. Dimensions (L x B x H): 6000 x 3700 x 6500 mm; 6. Weight: 4.5 t; 7. Main power: 70 kW; 8. Certification: CE European Compliance Certificate, SGS Independent Examination Certificate, National Compliance Certificate of China GB4455 Data sheet 1. Extruder (2 sets) 1.1 auger diameter: 55 mm 1.2 Ratio of length to diameter: 30: 1 1.3 Maximum screw rotation speed: 100 rpm. 1.4 Type of screw: mixed type, with a barrier 1.5 The material of the auger of the cylinder: 38CrMo (American certificate of protection of inventions  ...

Plastic granulation line with a capacity of approximately 500 to 600 kg/h Erema rga 120 1. extruder motor - 110 kW, - controlled by an inverter 2. kW thickener engine - 90 kW, 3. screw diameter 120 mm The machine has been completely refurbished (the costs of rebuilding the machine are approximately PLN 100,000). Additionally, the following equipment was purchased for the construction of the entire line: 4. Self-cleaning filter 2x400 mm. - new 5. Thread head - new 6.Extruder 150 mm. - new 7.Granulator for cutting threads - new. 8. Sieve - new 9. Koltex dryer with feeder - new. 10.Big bag station. The price in the advertisement is for the extruder only.

Single screw extruder: - practically not used - we have instructions for the extruder - type WJ45 - produced by a Polish company - WW Ekochem - a device designed for the processing of plastics, soft PVC -consists of a drive system (15kW motor and gearbox), a plasticizing system (a cylinder with a screw mounted inside), a frame, a heating and cooling system and a head - Feeding the raw material from the gravitational hopper - control by means of a control device -control cabinet - length 190cm - width 80cm -height 184cm -mass 710 kg

EXTRUSION LINES FOR SPIRAL PE PIPES / 300/1200 Max. diameter: 1200mm Min. diameter: 300 mm Diameter pipes D 300,400,500,600,700,800.900.1000,1200.SN4 and SN8 EXTRUDER/...1 Manufacturer/ Top Industri China Model/ D.65 Year/ 2007 Serial no./ No.1234 Screw diameter/ 65 Screw L/D ratio/ 33 Output capacity/ (kg/h) 250 Main drive power/r (kW) 50 Screen changer/ (YES/NO) No Co-extrud (YES/NO) No Running hours/ DIE HEAD Manufacturer/Fabricante Top Industri China Model/Modelo K2 Year/año 2007 Serial no./ No.1234 Extrusion tools and calibration tools A total of 8 sets of tools for extrusion and calibration of a square profile CALIBRATION TANK/ YES Manufacturer/ Top Industri China Model/lo Top Industri China 6000 Year/ 2007 Serial no./ No.1111 Pipe range diameter/ square profile No Vacuum pump/ 4kw Length/ 6000 COOLING TANK/ YES Number/ 1 Manufacturer/ Top ...

Automatic Machine For Extrusion 90 ° T Fittings For Flue Pipes Complete With 14 Molds The diameters supplied are: 80/100/120/130/140/150/160/180/200/220/230/250/300/350/400 The machine is perfect like new

Coextrusion Blow film line 3 layers CMG 55/75/55LHE – SW 2200 TA Year of production 2018 1. Extruder A – Single screw extruder 5530/LHE - Screw diameter 55 mm - L/D ratio 30/1 - Extruder drive – 66 kW AC - Nominal output in LDPE MFI 1.0 130 kg/h - Lever type screen changer 2. Extruder B – Single screw extruder 7530/LHE - Screw diameter 75 mm - L/D ratio 30/1 - Extruder drive – 118 kW AC - Nominal output in LDPE MFI 1.0 275 kg/h - Lever type screen changer 3. Extruder C – Single screw extruder 5530/LHE - Screw diameter 55 mm - L/D ratio 30/1 - Extruder drive – 66 kW AC - Nominal output in LDPE MFI 1.0 130 kg/h - Lever type screen changer 4. 3-Layer Blow film co-extrusion die CBH500 F/3S-IBC with D 275 mm, LDPE, gap 1,6 mm 5. Internal bubble cooling system - Introduction air fan 7,5 kW with heat exchanger battery - Extraction air fan 7.5 kW - ...

Line for extrusion of XPS polystyrene foam boards with ultra-low density 20 kg/m3 and compressive strength 250-300 kp using technology patented in Ukraine with a set of additional innovative devices. Board parameters: width up to 1200 mm, thickness up to 200 mm, length is not limited. Extruder 180/235mm L/D 28-40 manufactured by the Korean company MYUNG-IL FOAMTEC Foaming gases - CO₂, DME, HFC, HFO, propane-butane, isobutane. Pumping equipment set Capacity up to 50m3/h (1000kg/h) Weight – 60t. Line length -90m, width 6m. Power consumption – 650 kW The extruders operated for a year and a half after the plant was sold to another owner, and the rest of the time the line was in storage.

For Sale: Complete Extruder Line Manufacturer: Union Type/Model: Ø 120 LD 42 Year: 1998 Motor: 147 kW DC variable speed Condition: in good working condition Water ring palletizer Screw diameter: 120 mm, Screen changer: OMP PREALPINA Year 2013 like new Screen changer type: hydraulic, Ø 300 mm Degassing System: atmospheric degassing Capacity of 300÷500 kg/h, depending on the type of material and MFI Pelletizing line suitable for the recycling of grinded rigid plastic materials PE, PP, PS, ABS Spare parts: 3 screws second-hand Control panel

Complete extrusion line with support for sale, dispense, extrude, granulate and SAG Extruder: Feddem FED 72 MTS, 2000., 2012 general overhaul. 600-1000 kg / h with PBT, PA6, PA66, GF and impact resistant modified products. Thyssen TGE 3-72-DOS-4 transmission, 314 kW Compexmotor, 4 degassing zone with 3 vacuum degassing, 3 body parts open side feeder, Dosage: Dosage: 6 Brabender dosing scales with control, multiple pellets/Flake car, 2 powder scales, a fiberglass scales, Transitube support for glass fibers Side feeder: Feddem/Flender Vacuum pump: A439697 Integrated Granulation: IPS SG120/7.5, 2000, 9 kW Complete solid steel frame for the feeders and water bath brushes, bagging Tower for granules with S + S all metal separator, Transitube glass fiber/material high to promote

Complete extrusion line for the production of PP and PS films, produced by Battenfeld-cincinnati GmbH 2012 release, Designed for the production of films of polypropylene and polystyrene. equipped with a loader Moretto Main technical characteristics: Extrusion line: Possible materials for processing PP and PS Max. film width 850 mm Film thickness 300 ÷ 2000 microns Productivity 400kg / hour Gross weight, kg 18 138 kg 2nd position winder: Max. film width 1000 mm Max. diameter of winding is 1400 mm Pneumatic winding shaft diameter for 152 mm (6 ’) sleeves To operate the equipment, a three-phase AC network is required, compressed air with a pressure of 8 Bar, water supply.

Thickness range : 0,15 - 3,00 mm Max width : 1.400 mm Raw materials : HIPS - ABS - PP - PE single layer                                   GPPS-HIPS, SAN-ABS, PMMA-ABS double layer Extruders: Main extruder : Diameter 110 mm, 160 kw AC motor, degassing, 7 zone heat control Co-extruder : Diameter 90 mm, 55 kw AC motor, 6 zone heat control Screen changer: Double screen changer, hydraulic Melt Pomp : 600-700 kg / h capacity 15 kw AC motor Feed Block : AB - ABC T die : 1600 mm width - 9 zone heat control Calender group: 3 pcs diameter 350 x 1570 mm high efficiency water cooled cylinder                            Hydraulic cylinder movement and mechanical lock                            3 pcs cooling heat control device Coil winding : 2 pcs AC motor Sheet  ...

Complete extrusion line with foster, dispense, extrude, granulate and bagging for sale. Clsihnhs Extruder: Abdullah AE 1-75-36-7 single screw extruder, 200-300 kg / h throughput (PA6, ABS, ASA, PP, PBT, POM, etc.), 126 kW motor, Dosage: Protec polymer (formerly man and Hummel), main level with core Auger and volumetric dosing, 2 main scales, 2 additive scales (defect) Granulation: Pelltec SP 100 easy, 3 A439697 kW Also here: Complete solid steel frame for feeders, water bath, wiper frame, classifying screen, bagging tower with all metal separator, conveying blower.

Complete retrofitted line consisting of: Processable material: plasticized PVC and polyphenyl composition passive pay off Bandera 3025 extruder overhauled with Toshiba inverter 2 extrusion screws (1 for PVC 1 for polyphenyl) cable and profile extrusion head 4 meter stainless steel tank double flywheel drive (interface on line with inverter) double reel winder for 400 reels

Tecom extruder rotating head, inverter motors consumption in operation 9kw/h Productive yield 40Kg/h. Integrated castle, motorized tow adjustable in height and modified for sheds up to 4m. Mixer, dryer, automatic master doser, UV ray printing treatment. New wiring and thermoregulators. Band min 18cm Max band 80cm Bivalent screw: extrudes HD/PLT/BIO COMPOST Visible under power in Italy

Most of the components of the line have been sold independently. Remaining for sale now: Single screw extruder Pagani-Italy ⲫ60x 1700 [mm]; 32KW engine; 6 heating zones with potentiometer The pictures show other elements which were previously for sale, but this is not the case anymore. ONLY THE SINGLE SCREW EXTRUDER is for sale. The price shown online is for the single screw extruder too.

Know-how included FOAMED PP Film Line: 540 mm wide, can produce 1200 - 1500 Kg per day (120-140 mic) Extrusion by Dipiemme,Italy (1991) With Piovan Dosaging(1998) Corona by Martignoni(2004) Scan-T Control by Roder Electronics Mechanical parts of the machine constructed by Off. Trevisani S.a.s Ferroli Cooling

A110 Twin-screw side feeder (ZS-B) The ZS-B allows fillers and additives or chopped glass fibres to be fed in from the side in powder and/or pellet form. The co-rotating screw shafts are largely self-wiping and pro-mote active conveying. The feeder can be attached to the twin-screw extruder in conjunc- tion with a connection housing at any point in the processing section where feeding of the above-mentioned materials makes sense. The ZS-B can be quickly installed or removed using quick-change devices on the screw barrel. The ZS-B is designed with a wheeled base frame; a flat and smooth installation surface is required for this. Sufficient spacemust also be provided for installation and removal, as well as for cleaning. The twin-screw side feeder consists of the following component parts: ● screw barrel ● 2 screw shafts with positive engagement ● frequency-controlled motor  ...

Sandore mobile extrusion unit, model: NM1, serial number: 5384, year of construction: 2020, 400 V, 3 Ph, 50 Hz, 1500 W, plastic belt, belt width: 150 mm, total dimensions: 500 mm x 1350 mm x 1450 mm. Incomplete.

Thermoforming line for the production of OMV F-85 polystyrene plates, made in Italy, 2004, in operation no more than 2 years. The condition is almost new. The scheme of work is a closed technological cycle. Line composition: Extruder with a co-extruder D100 + D60 with a unit for mixing and dosing the material, calender unit, thermoforming machine F-85 with a system for stacking products, packaging machine, crushing unit, thermostats for calenders and thermal stamps, thermal stamp for dessert plates 167 mm 20 nests, thermal stamp plates flat 210 mm 12 nests with inserts for the production of plates 2x and 3x sectional. In working order.

Extrusion line for the production of heat-shrinkable OPS (oriented polystyrene) film Product structure A/B/A Recyclable materials (mixed) SBC, GPPS Thickness 40-60 microns % shrinkage 70-72% Net width / when leaving TDO 2780 / 3200 Main extruder ZSK Mc70 plus Coextruder 50 mm Static mixers - in the main extruder and co-extruder lines. Die - Nordson Autoflex VI-R H40 Die 750 mm (28 bolts) Roll stack - 2 shafts (with mirror surface - chrome) MDO 6 shafts (1, 2 - preheating; 3-4 stretching 1:1.2; 5.6 - annealing) 2 thickness measurement sensors from NDC (USA, UK) with automatic thickness control, new control equipment installed in 2018. (computer and software), sensors - overhaul in the UK from the manufacturer (NDC) - 2019-2020 TDO stretch up to 1:5 Filmatic winder from W&H (Germany), Max. roll diameter 580mm, expandable to 800mm line speed (mechanical) up to 50 m/min Volt ...

Pressing force: 1400t, press-out length flat: 1500-12,000mm, recipient 1: max block diameter: 185mm, max block length: 350mm, recipient 2: max block diameter: 150mm, max block length: 580mm, max. operating pressure: 240bar, connected load: 535kW, retrofit 2001 includes power increase to 1000t, new piston rods ground and chrome-plated. Operating pressure: 240bar, connected load: 535kW, year of construction is original 1915, retrofit 2001 includes power increase from 1000t to 1400t, new piston rods in ground and chrome-plated design, installation of a new shear, completely new mould slide, hydraulics: renewal of the control, regulating and safety valves. Completely new pipework, completely new control cabinet, control panel, length measuring system and control system (Siemens S7-300), with documentation, an on-site inspection is possible.

Line includes (1) Material Dosing Iveca (2) Extruder Windmöller & Hölscher (3) Blow Head Windmöller & Hölscher (4) Die Windmöller & Hölscher, diameter: 200mm (5) Film Cooling Windmöller & Hölscher (6) Calibration Basket Windmöller & Hölsche (7) Flat-Lay Unit Windmöller & Hölscher (8) Haul-Off Windmöller & Hölscher (9) Winder Svend Knudsen (10) steel construction, operational hours counter: ca. 7000h, with documentation, the line was only used for testing purposes.

Betol PVC Extrusion Line Type BC50 0-100rpm 4x Eurotherm barrel controllers Start / Stop Stainless Steel Water trough Width 200mm x 36” Comes out hot and goes through tunnel which cools it down and turns it rigid and into a Haul Off

we design small pipe / profile lines on request, also coex

QTY. 2 CONTAINERS, OD 655 x ID 250 MM x 560 MM LONG & OD 522 x ID 180 MM x 560 MM LONG, PIRCER DIA. 63 MM,

Plant for the production of filament for use in 3D printers Capacity up to 10 kg/h consisting of 30 mm extruder, stainless steel trough, puller and winder with traverse guide

1、Product size: PP melt blown fabric with width at 500mm(after trimming 175mm2pcs) 2、Main Material: PP compounding material(we will supply formula and operation video after order) 3、Extruder type: SJ65/30 single screw extruder 4、Output capacity: 300-400kg/24hour (24hours) 5、Electric power supply: 3phase, 380V;50Hz(customized) More data available if needed

Berstorff Strainer Extrusion Line Consisting of: Extruder Supplier Berstorff Type GE 150KSx16D Year of construction 2007 Pins: 12 Pins per level: 8 Condition: good Weight approx. 10000 kg Screen change: hydraulic, bladder accumulator 20lt / 300Bar D = 200mm Gear pump Supplier: Maag Pump Systems Type: extrex® 110-5 RV Volume 716 cm³ / rev Year of construction 2013 Condition: good Heaters Supplier: Regloplas Type P140 Year of construction various Number 5 pcs. Cooling bath Cooling medium Water above, 2 rows below with 4 fans each Year of construction 2006 Condition: good Dimensions 9m Weight approx. 500 kg Especially 8 fans Installation tape Year of construction 2006 Condition: good Weight about 300 kg

1) Wood pulveriser input 12mm out put 150mesh 2) hot mixer max temperature 120dg capacity 100 kg per pach(15 mints each pach) 3) PE pruvolizer (from granules to powder) capacity 200 kg per hour 4) Crusher capacity 500 kgper hour 5) Wpc pelletizing extrotion line capacity 300 kg per hour 6) Extrusion line to make wpc wall and decking capacity 42 mters per hour including cooling table and cutting table and dropping area. This factory includes all the necessary tools and accessories, it is almost new in condition, built in 2021. It has produced 5000sqm of product

We offer for sale a new hydraulic press (65t closing force). This press is used for extruding and dosing mixed mixtures. The operating time of this machine is a maximum of 20 months. The machine was used in the prototype process for the production of the BMC mixture. The machine can be supplied with a special stainless steel tank with a volume of 400 l.

Constructed according to the high Italian quality standards, Made in sturdy carbon steel welded structure Flat bottom with horizontal screw and doctor blade, or conical bottom with diagonal screw (depending on project requirements) plexiglass inspection window, Electric motor bespoke to project material and size paddle type minimum level indicator Bolted inspection door, Safety devices, CE compliance, drawings, user manual, Can be integrated with our [DRYING SYSTEM](https://www.germanplast.eu/listings/4115725-drying-system-for- vertical-mixers)

TECNOVA EXTRUSION LINE 130 mm.500 kg/h, PE PP PC PS ABS PET PA, Including:, Scrap silo, Extraction auger, Crammed feeder, Extruder with 130 mm screw diam.37 L/D, N. 1 vacuum degassing pump, 225 kw drive, Semi-automatic non stop screen-changer with screens diam.250 mm., Available with a [FIMIC RAS 400](https://www.germanplast.eu/listings/5241333-used-2007-fimic-ras-4 00-automatic-screenchanger), Water ring pelletizer, Drying centrifuge, Pneumatic extraction for granulate, Constructed in 2004, not working from 2010, Offered reconditioned (various steps to be agreed upon), (see how we recondition on our WHAT WE DO page on top)

N 1 UNION die, used for the extrusion of a profile for 60 mm diameter shutters, complete with screw and asynchronous motor 380 V, 7.75 KW, with six gears. Changed cylinder and screw in 1985. Replaced screw in 2015. Construction year 1976. Capacity : 30 kg/h in 3rd gear. N 1 TEM electrical panel, used with six zones with thermoregulators and thermocouples by Scotti Instruments s.p.a. N 1 Automatic equipment, used, for P.V.C. profiles rigid brand CERRINI type C.P. 80/PW complete with calibrator holder plate with vacuum pump with 4.1 KW motor, towing unit, cooling unit with fan with 0.75 KW motor, punching unit, stick stop punching unit, cutting unit and automatic tilting unit of mt. 6. Complete equipment for rolling shutter rigid pvc profile extrusion (produced in 1995) N 1 complete chain of resistances N 1 steel calibrator Complete equipment of rigid pvc profile extrusion for shut ...