pur used for sale

1-Clamp Automated Perfect Binder, Format: Sheet Size: Max. 320x320mm, Min. 148x105, Format: Cover Size: Max. 660x320mm, Min. 230x135mm, Book Thickness: 1 to 50mm, Cover Weight Range: 80-300 g/m², Cover Pile Height: Max. 70mm, Max. Production Speed: 500 Cycles/Hour (About 300-400 Books/Hour), Color Touchscreen Control Display Panel, 200 Memories For Repeat Orders Saveable Jobs, Double And Miss Detection, 1 Carriage Clamp Automatically Adjusted To The Input Book Thickness, Automatic Book Thickness Caliper, Milling And Roughening Station, Adjustable Milling Depth From 0mm To 3mm, Glue Tank With Dual Application Rollers And Side Gluing Roller (Adjustable Amount Of Glue And Glue Lenght Through The Color Touchscreen, Spine Gluing, Side Gluing, Nipping Station, Suction Drum Cover Feeder, 4x Cover Scoring/Creasing, PUR Gluing System SM Klebetechnik, Type: AN 533604, AGE: 2009, Serial No. 090838 ...

Was used for PVC, PUR and TPEV, with control cabinet, used screws and one used cylinder, with documentation, was maintained regularly.

Built in 2007 Size max: 430 x 320 x 60 mm Size: 140 x 100 x 3 mm working hours: 17.900 h Speed:max 5.000 c/h Equipment: gathering machine: • 24 stations • 24 feeder 1571 controls: • ASIR automatic signature image reader • ASAC automatic self-adjusting calipers perfect binder: • 20 clamps • double kombined spine preparation station • hotmelt spine gluing unit • hotmelt side gluing unit • rotary coverfeeder • cover scoring • cover pressing station • 2nd cover pressing station • lay down device optional equipment --- not included ---: • PUR spine gluing unit Bl7yrcc8tb • PVA (cold glue) spine gluing unit • conveyor belts to trimmer • trimmer Müller Martini Merit

Manufacturer: Friz , Type: Profi PWP 120/42, Year: 2006, Control: yes, Suitable for veneer and paper: 2D Folie, Film width mm: 450, Gluing system Pu: PUR, Feeding speed min-max m/min: 6 - 40, Feeding speed continous adjustable: yes, roller diameter mm: 152, Work piece width min-max mm: 10 - 450, Min.-max. workpiece length in mm: min 2500, Min.-max. workpiece height in mm: 6 - 150, Overhauled on: 35 Betriebsstunden, Year :2006

OTT Tornado - TOP Control - via a 15-inch colour touch monitor for full automation and maximum ease of use CM-CombiMelt gluing system Suitable for the processing of EVA and PUR hot melt adhesives as well as all common cleaning granules Joining machining part for attaching chipboard Automatic Roller Magazine Automatic Edge Magazine Double cross-cuter, automatic swivel 0° / 3° Flush milling machine - for flush milling - 12mm Fine milling machine RADIUS - Radius milling - Profile knife R2 - R5 Automated Copy Milling - Corner Rounds Scraper Device - Radius Surface Scraper Device Lubricant Spray Device - PU Cleaning set with fine buffing device very stable workpiece support with roller conveyors - FRONT with scissor pull-out Complete tooling included First delivery 2012 Machine is WORKSHOP OVERHAULED in TOP CONDITION

Kolbus Perfect Binding Line, Equipped With: Gathering Machine: Kolbus ZU 805 Gathering Machine, AGE: 2016, Basic Frame with 16 Gathering Stations, Gathering For Folded Sections And Single Sheets Possible, Mechanical And Electrical De-Coupling Of Each Station Possible, Air Center Vacuum And Compressed Air Supply For Gatherer, Reject Unit AS Raceway/Transfer, Integrated Jogging Station, Transfer Channel As Connecting Unit To The Binder, Perfect Binder: Kolbus KM 600, AGE: 2016, 21 Clamps With Co-Pilot Touchscreen, TFT Visualizing Monitors With Graphic Operator Guidance, Milling/Brushing, Equalizing Milling, Notching And Brushing Units, Kolbus LH370 EVA Hot-Melt Pre-Melt Unit, EVA Hot-Melt Roller Type Spine Gluing Unit On Mobile Base, PUR Spine Glue With Nordson Pre-Melter, EVA Hot-Melt Side Glue Unit With Controlled Cut-Off, I.R. Heating In Radius For Increased Glue Open Time, RA 49.A Pile ...

Fully Automated 4 Clamps Perfect Binder With PUR Gluing Unit from SM Klebetechnick GX2311, AGE 2009, Serial No. 08103754, Book Size: Max. 320x320mm, Min. 145x105mm, Cover Size: Max. 320x660mm, Min. 135x225mm, Book Thickness: 0,3 to 65mm, Cover Weight Range: 81,4 - 302,4 g/sqm, Book Weight Range: 60 - 135 g/sqm, Cover Pile Height: Max. 150mm, Milling Depth Adjustment From 0 To 4mm, Speed: 1350 Cycles/Hour, 4 Creasing Positive/Negative, 2 Creasing, Palmar For Automatic Books Adjustment, Color Touchscreen Panel, Book Thickness Input Caliper SI-470A, Cover Feeder Suction, Supersonic Double Feed Detect Sensor, Glue Tank Unit, Lateral Side Glue, Horizon SI-470A Delivery Conveyor, Smoke Extractor , Power Required: 400V Rotary Current 16A, 6,5 KW For Adhesive Binder and 400V Rotary Current 16A, 6,0 KW For Melting Unit, Standard Accessories

Code: 0226 Brand: FELDER - FORMAT4 Model: PERFECT 710 E-MOTION - CE Standard Automatic edge bander with grinding unit for edgebanding solid wood, chipboard, veneer, PVC, Abs, and melamine panels - CE Standard - Year 2010 Technical data: Min edge thickness 0,4 mm Max edge thickness 10 mm Max panel height mm 60 Max feed speed 12,5 m/min Top pressure bar: workpiece thickness adjustment is carried out electronically from the control panel Operating unit: infeed guide adjustable from control panel Grinding unit: with 2 diamond cutters Gluing unit with glue pot with quick-change system for processing EVA and PUR glue Edge pressure roller unit with 3 rollers with positioning from control panel End cutting unit consisting of 2 independent blades with high-frequency motors 12000 rpm - Tilting from 0 to 15° Multi-function end trimming unit with 2 motors 12000 rpm Edge scraper ...

Hot melt lamination Hotmelt Laminator Hot melt lamination line Hot melt lamination stand Hot melt coating stand Hot melt coating line Nordson BC 62 Porous Coating Coating weight : 0.85-60 g/m2 Web width : 2400mm bm 200 bulk melter tank , heated hoses, hot melt applicator, Metering gear pump station and coating head • Hot melt application gsm : minimum 0.87 gsm/m2 • Hot melt application gsm : maximum 60 gsm /m2 • hot melts: SIS/SBS, PSA,EVA,PUR based

Barberan - semi-automatic line for the production and lamination (Honeycomb) of boards equipped with a double-sided PUR hot-melt glue coating machine. The line is ideal for the production of honeycomb panels or furniture doors and for the lamination of all types of films such as PVC, PP, CPL or HPL. The maximum capacity can only be quantified by a specific product. For example, if we talk about doors, the maximum flow rate is two doors per minute. The maximum size of the boards is 1280 mm wide, 2800 mm long and 90 mm high. The rolling process is more continuous and the theoretical production capacity is several million square meters per year. In operation 600 hours. You can see it in operation before disassembly, Seller can arrange transportation.

Equipment/technical data: - e-Motion control with 21" smartouch instead of 10" tempora F 800 Ser - Upper pressure beam motor-controlled, adjustable workpiece height 8-60 mm - Chain feed 12 m/min, 1.5 kW, Minimum workpiece length 140 mm - Turntable edge magazine for roll edge material 0.4 - 3 mm and strip magazine for 12 pieces 10 mm edges - Edge feeding for roll and strip material - pneum. Controlled gluing unit, Teflon-coated, for 1.5 kg EVA granules, with synchronized glue roll and quick-change system. (for PUR adhesive processing, taking into account the Adhesive processing guidelines) - Pneumatically operation-controlled pressure unit e-motion (one driven, two conical contact rollers) tempora 60.12/2: 0-12mm - Impact shears for roll material - Cross-cut saw with 2 motors - Joining milling unit 2 x 1.5 kW - Upper and lower combination milling unit, 0.75 kW each, flush a ...

Cylinder sensor with GMR cell, 2 pcs IFM ELECTRONIC MK5308 MKC3028BANKG/G/0.3M/ZH/AS 10 - 30 V DC connector Connector: M8 x 1, 3-pin Material: Housing: PA; Mounting eccentric: stainless steel cable: 0.3 m, PUR New ! dimensions (sensor without cable): 26 x 6 x 3 mm dimensions ( packaging ): 200 x 150 x 10 mm

Connection cable with socket, 5 pieces IFM ELECTRONIC EVC148 ADOAF032MSS0005H03 plug connection: 1 x M8, angled, coding: A, locking: brass, nickel-plated, contacts: gold-plated cable: 5 m, PUR, halogen-free, black, Ø 3.7 mm, 3 x 0.25 mm² (32 x Ø 0.1 mm ) New ! Dimensions (packaging): 300 x 230 x 70 mm

Connection cable with socket, 3 pieces IFM ELECTRONIC EVC008 ADOAH043MSS0005H04 plug connection: 1 x M12, angled, coding: A, lock: brass, nickel-plated, contacts: gold-plated cable: 5 m, PUR, halogen-free, black, Ø 4.3 mm, 4 x 0.34 mm² (42 x Ø 0.1 mm ) New !br /br Dimensions ( Packaging ): 300 x 230 x 70 mm

Description: serial number: 1000017130 control: BIESSE  , max. glue thickness: 3 mm max. glue-on height: 65 mm max. thickness of roll material: 3 mm min. workpiece length: 100 mm min. workpiece width: 150 mm max. workpiece thickness: 90 mm max. feed rate: 25 m/min.  , comfortable looptec system BIESSE 2 glueing units in the row (exchange of color from panel) CNC set up off all machine from panel maximum thickness of panel: up to 90 mm Nordson system for PUR included (wtih conecton to one gluing unit) airforce system change of glue + tape based on the barcode CNC grooving unit  , please also have a look at the video and the PDF documents of this machine serial number: 1,000,017,130, workpiece thickness: 90 mm, feed: 25 m/min, control: BIESSE, Approx. Onsite Dimension. (l x w x h): 12,000 x 3,500 x 2,000 mm, weight approx.: 12,000 kg

Connection cable with plug and socket, 5 pieces IFM ELECTRONIC EVC225 VDOAF032MSS00,3H03STGH030MSS plug: 1 x M12, straight, coding: A socket: 1 x M8, angled, coding: A locking: brass, nickel-plated, contacts: gold-plated cable: 0.3 m, PUR, halogen-free, black, Ø 4.3 mm, 3 x 0.34 mm² (42 x Ø 0.1 mm ) New ! Dimensions (packaging): 260 x 180 x 40 mm

Magnetic field sensor, 2 pcs BALLUFF BMF005H BMF 305K-PS-C-2-S49-00 10 - 30 V DC connector Appliance plug: M8x1 plug, 3-pin Material: PU ( Active Area ), LCP ( Housing Material ), PUR ( Sheath Material ) Connection Cable: Length approx. 0.2 m New ! Dimensions (sensor, without cable): 33.5 x 5 x 10.5 mm Dimensions (packaging): 260 x 240 x 10 mm

Description: Max. panel height 60 mm Min. panel length 130 mm Min. panel width 65 mm Min. edge thickness 0.4 mm Max. edge thickness 3 mm Max. forward feed speed 30 m/min Pressure with rubber belt No. Panel Sizing / Milling units , Unit : pre-milling unit Constructor model : R3 L20 motor power : 4 KW r.p.m. : 9000 RPM Lamps to preheat the side of the panel , Edge coil magazine , no. positions 2 glue pot for EVA hot melt glue , premelter for PUR glue , Roller set to press the edge , no. pressure roller 5 No. Edge Processing Units 10 Processing Unit : end trimming Constructor model : 8,42/39/B no. motors : 2 Processing Unit : fine trimming to trim and round Constructor model : 08.055 Processing Unit : Corner rounding Constructor model : 08.342 Processing Unit : edge scraping Processing Unit : belt sanding Constructor model : 08.62 Processing Unit : belt sanding Const ...

Feed speed: , m/min. Dimensions (L/W/H): , mm total power requirement: , kw weight of the machine ca.: , kg Year: , 0 Arm length: , mm 1 KUPER veneer splicing machine FW Junior 920 --------------------------------- with air heating system. For sale on behalf of the customer in the IS condition! For assembling veneers with thicknesses of approx. 0.4 - 2.0 mm. A special glue thread is used as the adhesive medium and is zigzag or Wavy line is applied by a heated thread guide. Guaranteed tight joint, high adhesion and tear resistance even with very wavy surfaces Veneer. During subsequent pressing, the glue thread is placed inside. Sanding the adhesive medium is therefore not necessary. Easy to use and efficient way of working Method that has now been proven 1000 times over. Specific features: - Torsion-free C-stand construction made of steel - Resistant PUR paint - Discus disc system with to ...

Single-sided automatic edge banding machine with joining unit, hot melt adhesive specification for straight workpieces (EVA-PUR glue basin with outlet function optional), HF cross-cut saw station, HF milling unit, chain feed, double roller top pressure, extendable workpiece support rail and signal lamp for workpiece sequence. For ABS, PVC, melamine and thick wood veneer roll material, as well as fixed lengths from 0.4 – 3.0 mm and from 8 – 50 mm workpiece height.

Description: Serial n°: 200.07.006.15 maximum adhesive thickness in 10 mm maximum panel thickness 60 mm maximum thickness of rolled material 3 mm minimum piece length 140 mm minimum workpiece width 70 mm maximum feed rate 12 m/min electric height adjustment pre-heating zone granular gluing system glue container below the food chain changeable glue tank suitable for PUR glue spraying system straightening unit End cutting unit 2 motors flush/radial/bevelling stations 1 Edge copying unit 1 motor scraping unit Edge scraper, Flat scraper polishing unit strip magazine synchronised aggregate NC axis(es) machine model from left to right machine length in 5.140 mm FORMAT 4 E-MOTION control Loading cost to be defined serial number: 200.07.006.15, edge thickness: 10 mm, workpiece thickness: 60 mm, feed: 12 m/min, control: FORMAT 4 E-MOTION, total power approx: 11 kW, Approx. Onsite Dimension. (l x ...

Description: Max working width 300 mm Max. machinable height 130 mm Gluing System PUR Max. machining width 300 mm Max. working height 130 mm Pressure rollers yes no. rollers 1 roller diameter 100 Edge coil magazine yes no. positions 1 Premelter for polyurethane glue yes Premelter for polyurethane glue MITSU Lamps to preheat the surface yes Lamps to preheat the surface 4 Top presser with idle wheels yes Control system SIEMENS SIMATIC PANEL TOUCH Safety standard CE mark yes Total installed power 34 Kw Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg

Description: Gluing System PUR Pressure rollers yes Premelter for polyurethane glue yes Premelter for polyurethane glue WPR Safety standard CE mark yes Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg

gebr. Kantenanleimmaschine Fabrikat: Format 4 Typ: Tempora 60.12/2 E Baujahr: 2020 -unüberholt- ohne Gwährleistung e- Motion Steuerung Oberer Druckbalken: - Druckbalken aus geschweißter Verwindungsstreifer Stahlkonstruktion. Motorisch gesteuert einstellbare Werkstückhöhe 8-60 mm über e-motion Steuerung. - Glatte,zweireihig versetzt angeordnete Oberdruckrollen, die dafür sorgen,dass eine gleichmäßige Druckverteilung auf das Werkstück stattfindet. - Werkstückabstandüberwachung durch eine Ampel. - Drehteller Kantenmagazin für Rollenkantenmaterial 0,4-3 mm: - Ø des Drehtellers:800 mm - Streifenmagazin für 12 Stück: 10 mm Kanten - Kantenzufuhrung für Rollen- und Streifenmateral tempora Serie - Pneumatisch gesteuertes, Teflonbeschichtetes Leimaggregat für 1,5 Kg EVA Granulat - mit synchronisierter Leimrolle und Schnellwechselsystem. Geeignet f ...

single-sided direct postforming machine Brand: Wehrmann Type: Combima /K/I/R80/1260/V Year: 2018 Varied using for doors, worktops, furniture parts, curved caravan fronts, etc. Technical data: A single-sided throughfeed postforming machine for the postforming and postfolding process, for processing curved workpieces in caravan construction. For workpieces to be profiled made of wood/wood materials with laminate (CPL,HPL) as surface material. The laminate protruding for the postforming process is located in the machine on the underside of the workpiece and is formed from the bottom to the top. Technical data Machine Constant workpiece projection from the chain conveyor: from approx. 35 mm Throughput width min.: 130 mm ( only for straight parts ) Workpiece length in feed direction min.: 1,000 mm Basic height: 940 mm (upper edge of chain conveyor) The workp ...

Manufacturer: LUKAS / JAWES OF LIVE New device with warranty for cutting cables, car parts, usable in recycling Cutting device LSI 200 Mouth width: 125 mm Weight: 13.8 kg Lukas cable shears Hydraulic cable shear for the mobile use. New machine The type LS/ 200 can be used very good to handle with heavy cable. Because of its excellent shear forces it saves much time. Its low weight makes it possible to work economically. The unique Lukas Star Grip valves makes it easy to use. The cutter blades can be resharpened. This makes a long service life. Operating pressure: 50 MPa Shear forces: up to 270 kN Width of mouth: up to 125 mm Dimensions: l/w/h 680 x 190 x 163 mm Weight: 13.8 kg. Hydraulic power system Operating pressure: 50 MPa Oil tank: 9l Output: low pressure 4.4 l/min high pressure 1.4 l/min Power: 1.5kW with 3000 min-l /230 V Dimensions: l/w/h 372 x 312  ...

For transport and storage of all types of beverages ex: bier, wine, juice, liquor, whiskey. For yoghurt, mustard, honey, cream for hands, etc. Also for pharma and chemical purpose. Material: Cone: 1.4301 IIID Jacket: 1.4301 IIID All other parts: 1.4301 IIIC Volume: 1000 litre Test pressure:+ 3,4 bar Max. allowable: Operating pressure:+2,0/-0,15 bar Operating temperature:130°C Dimensions: Height over all:1845 mm +/- 10 mm Diameter of container:1000 mm Diameter of reinforcing ring:1012 mm Weight: 126 kg Thickness: Top Bottom:2 mm Lid:3 mm Jacket:1,5 mm Cone:2 mm Outlet Tube:2mm Forklift Tunnel:3 mm Design and Equipment: stacking device - consisting of a stacking crown which is welded directly on the top bottom; Top Bottom: with a DN 400 cover system which is welded in the center of the top bottom; Cover System with a DN 400 lid which ...

Storage tank, storage tank, fuel oil tank, diesel filling station, yard filling station consisting of: 1 x 30,000 litres capacity storage container 1 x pump type DK-80-MZ Description Containers: according to DIN 6616/D, above ground, double-walled, incl. officially recognized test certificate. The container has two saddle feet, a manhole DN 600 with dome lid, is used, emptied inside and professionally cleaned and is equipped with the following fittings: 1 filling pipe with TW closure (filling cap) and immersion pipe, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII), 1 ladder and 1 spare sleeve for picking purposes, 1 optical leak detector with type approval and leakliquid. The container is re-primed on the outside and painted in ral 7011 - iron grey. Other colours ...

Storage tank, storage tank, diesel tank, fuel oil tank, steel tank, yard filling station, service filling station - brand new - according to DIN 6616/D, above ground, double-walled, incl. officially recognized test certificate. The container has two saddle feet, a manhole with dome lid and is connected to the following Fittings equipped: 1 filling pipe with TW closure (filling cap) and immerse tube, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII), 1 ladder and 1 spare sleeve for picking purposes, 1 optical leak detector with type approval and leakliquid. The container is primed on the outside - on untreated sheets. L = approx. 3.80 m - D = 1.60 m - weight approx. 1.6 to. - ex works, freely charged - General: You will receive an invoice with VAT shown. The purchas ...

Tank Environmental Protection Wozniack . Specialist establishment according to Section 19 of the Water Budget Act (WHG) offers as follows . Diesel tank 10,000 litres double-walled used, with a new diesel pump Vision 60 The container is used, cleaned, overhauled and is equipped with the following fittings: 1 optical leak detector with type approval and leakage liquid (new) 1 filling pipe with TW closure (filling cap) and immerse tube, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII) (new) 1 ladder 1 Diesel pump Vision 60 (new) . Flow rate approx. 50 LTR/min . Hose length 4mtr can be extended. Container dimensions Length 5,310 mm Diameter 1,600 mm Weight approx. 1,500 kg Of course, you can also use your tank system. We are happy to offer you diesel pumps with a hig ...

Tank Environmental Protection Wozniack . Specialist establishment according to Section 19 of the Water Budget Act (WHG) offers as follows . Storage tank / extinguishing water tank 100,000 liters used. The container is used and cleaned from the inside. Length: approx. 15700 mm Diameter: approx. 2900 mm Weight: approx. 16000 kg The container can be fitted with the appropriate fittings for extinguishing water can be equipped according to DIN . Of course, you can also use your tank system. All our tank systems are used in our company by selected employees extensively checked and checked. An inexpensive delivery can be offered with . In addition, we purchase existing tank systems and can professionally as an approved specialist company , clean and transpot. We would be happy to make you an offer . We offer the tank system free of charge from the Warstein ...

extinguishing water tank, storage tank, earth tank, irrigation tank, sports field irrigation, cistern, rain collection container with 100,000 litres capacity for the storage of service water / extinguishing water. Dimensions: D = 2.90 m - L = approx. 16.00 m The container has a manhole DN 600 with dome lid, is used, emptied inside and professionally cleaned and is provided with a bitumen coating / bitumen insulation on the outside. Slight insulating damage due to removal and transport may be present on the container. Price from Söhrewald - freely charged - For use as a fire-fighting water tank, we can use the tank fully equipped with a fire brigade suction connection, consisting of: - 1 dome shaft made of glass-fibre reinforced plastic - GRP, complete with walk-in Steel plate cover - diameter = approx. 1.00 m, height = approx. 0.85m, - 1 pc. suction l ...

Diesel tank, steel tank, fuel oil tank, tank system, storage tank with 50,000 litres capacity according to DIN 6616/D, above ground, double-walled, incl. officially recognized test certificate. The container has two saddle feet, a manhole DN 600 with dome lid, is used, emptied inside and professionally cleaned and is equipped with the following fittings: 1 filling pipe with TW closure (filling cap) and immersion pipe, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII), 1 ladder and 1 spare sleeve for picking purposes, 1 optical leak detector with type approval and leakliquid. In this example, the tank was painted in ruby red. The container is re-primed on the outside and painted in ral 7011 - iron grey. Other colours at no extra charge: RAL 6005 - moss green, RAL 5011  ...

Hydraulic Horizontal Straightening Press, used Horizontal multi purpose press, used type: HHP160 max. pressing force/ max. tonnage: 160 t Year built/ year of make: 1965 Manufacturer/ make: Pellissier Hanau max. pressing force/ max. tonnage: 160 t Piston stroke/ stroke of plunger: 400 mm Piston diameter / diam. of piston: 300/ 185 mm Extension / depth of throat: 225 mm Table size/ table size: 1150 x 350 mm Pressing speed/ speed of pressing: 16 ... 6 mm / sec Advance/ advance: 75 mm / sec Return/ rapid return: 208 mm / sec Installation width between Kobendruckstück and traverse pressure pieces/ distance between plunger with ram and locators: 320 mm Distance of the pressure pieces on pistons or table / distance between locators of piston and table: 50 ... 888 mm Total power / connected power: 14 kW; 380 V We ...

tank system, diesel tank, fuel oil tank, storage tank with 5,000 litres capacity according to DIN 6616/D, above ground, double-walled, incl. officially recognized test certificate. The container has two saddle feet, a manhole DN 500 with dome lid, is used, emptied inside and professionally cleaned and is equipped with the following fittings: 1 filling pipe with TW closure (filling cap) and immersion pipe, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII), 1 ladder and 1 spare sleeve for picking purposes, 1 optical leak detector with type approval and leakliquid. The container is re-primed and painted on the outside. L = approx. 2.80 m / D = 1.60 m / weight approx. 1.3 tons. / ex works, freely charged. General: You will receive an invoice with VAT shown. The purchase ...

Diesel tank, storage tank, service station, tank plant, steel tank, storage tank with 10,000 litres of content according to DIN 6616/D, above ground, double-walled, incl. officially recognized test certificate. The container has two saddle feet, a manhole DN 500 with dome lid, is used, emptied inside and professionally cleaned and is equipped with the following fittings: 1 filling pipe with TW closure (filling cap) and immersion pipe, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII), 1 ladder and 1 spare sleeve for picking purposes, 1 optical leak detector with type approval and leakliquid. The container is re-primed and painted on the outside. Dimensions: L = approx. 5.30 m / D = 1.60 m / weight approx. 2.2 tons. / ex works, freely charged. General: You will r ...

Alternating silo type WSD 18/ 1 bar, capacity approx. 18 m3, net weight approx. 2,900 kg, Stand area 2,500 x 2,500 mm, total height 7,100 mm, cone 60, outlet height 1,300 mm, outlet flap NW 250 Other: Neusilo, blasted, primed, lacquered RAL 9010 (pure white)

Tank Environmental Protection Wozniack . Specialist establishment according to Section 19 of the Water Budget Act (WHG) offers as follows . Diesel tank 7,000 litres double-walled used, with a new diesel pump Vision 60 The container is used, cleaned, overhauled and is equipped with the following fittings: 1 optical leak detector with type approval and leakage liquid (new) 1 filling pipe with TW closure (filling cap) and immerse tube, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII) (new) 1 ladder 1 Diesel pump Vision 60 (new) . Flow rate approx. 50 LTR/min . Hose length 4mtr can be extended. Container dimensions Length 3,710 mm Diameter 1600 mm Weight approx. 1,500 kg Of course, you can also use your tank system. All our tank systems are used in our company by selected employ ...

Cat. No. 11-3210 New Plant description Sudwerk This small-sud plant comprises all components for a complete and fully functional brewing plant. All system parts used have a high quality standard and are characterized by their ease of use. The two-device brewhouse consists of a mash/spice pan and a purified vat, which is also used as a hot tub. Technical description All pipes are cleaned by a circulation pumping system. a) In the mash pan, the mash is boiled, then the mash is pumped with the beer pump into the purifier pond. b) When bluish, the wort is pumped back into the mash pan. c) After bluish, the purified vat is cleaned and the sieve bottom removed. A special injection nozzle is installed on the cylinder wall at the bottom of the läuterbottich. As a result, it can also be used as a hot tub after removing the mobile screen floor. d) After boiling the hops  ...

Tank Environmental Protection Wozniack . Specialist establishment according to Section 19 of the Water Budget Act (WHG) offers as follows . Fuel oil tank tank system diesel tank and other hazardous substances. 25,000 litres capacity according to DIN 6616/D, above ground, double-walled gerabuct including an officially recognised test certificate. The container is used, cleaned, overhauled and is equipped with the following fittings: 1 optical leak detector with type approval and leakage liquid (new) 1 filling pipe with TW closure (filling cap) and immerse tube, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII) (new) 1 ladder Container dimensions Length approx. 8,390 mm Diameter approx. 2,000 mm Weight approx. 4,500 kg Of course, you can also use your tank ...

Tank Environmental Protection Wozniack . Specialist establishment according to Section 19 of the Water Budget Act (WHG) offers as follows . Fuel oil tank tank system diesel tank and other hazardous substances. 20,000 litres capacity according to DIN 6616/D, above ground, double-walled gerabuct including an officially recognised test certificate. The container is used, cleaned, overhauled and is equipped with the following fittings: 1 optical leak detector with type approval and leakage liquid (new) 1 filling pipe with TW closure (filling cap) and immerse tube, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII) (new) 1 ladder Container dimensions Length approx. 6,840 mm Diameter approx. 2,000 mm Weight approx. 4,500 kg Of course, you can also use your tank ...

Fuel oil tank tank system diesel tank and other hazardous substances. 50,000 litres capacity according to DIN 6616/D, above ground, double-walled including an officially recognised test certificate. Tank Environmental Protection Wozniack . Specialist establishment according to Section 19 of the Water Budget Act (WHG) offers as follows . Storage tank 50,000 liters double-walled used . The container is used, cleaned, overhauled and is equipped with the following fittings: 1 optical leak detector with type approval and leakage liquid (new) 1 filling pipe with TW closure (filling cap) and immerse tube, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII) (new) 1 ladder Container dimensions Length 10.7000 mm Diameter 2500 mm Weight approx. 9,000 kg Of course, you can also use  ...

Tank Environmental Protection Wozniack . Specialist establishment according to Section 19 of the Water Budget Act (WHG) offers as follows . Fuel oil tank tank system diesel tank and other hazardous substances. 30,000 litres capacity according to DIN 6616/D, above ground, double-walled gerabuct including an officially recognised test certificate. The container is used, cleaned, overhauled and is equipped with the following fittings: 1 optical leak detector with type approval and leakage liquid (new) 1 filling pipe with TW closure (filling cap) and immerse tube, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII) (new) 1 ladder Container dimensions Length approx. 9,990 mm Diameter approx. 2,000 mm Weight approx. 6,500 kg Of course, you can also use your t ...

Tank Tank Plant Storage Tank Diesel Filling Tank Heating Oil Tank Tank System Diesel Tank Fuel oil tank tank system diesel tank and other hazardous substances. 30,000 litres capacity according to DIN 6616/D, above ground, double-walled including an officially recognised test certificate. Tank Environmental Protection Wozniack . Specialist establishment according to Section 19 of the Water Budget Act (WHG) offers as follows . Storage tank 30,000 liters double-walled used . The container is used, cleaned, overhauled and is equipped with the following fittings: 1 optical leak detector with type approval and leakage liquid (new) 1 filling pipe with TW closure (filling cap) and immerse tube, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII) (new) 1 ladder Container dimensions Leng ...

Ladies and gentlemen, follow an offer for a field hospital. The equipment depends on the wishes of the buyer of the field hospital. Of course, containers can also be delivered instead of tents. Below and in the attached annexes, please refer to the corresponding configuration and components of a possible field hospital. They are welcome to adapt to their needs, accept or omit things. The field hospital for 100 people shown here. The equipment is basically optional. We are also happy to supply only the pure hardware component. We can also assist with the construction and operation at any time. If this product is of interest to you, we will be happy to provide you with a complete and detailed offer. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreement ...

Back-pressure turbine Manufacturer: Fa. KKK First Start-up: 2002 Operating Hours of Turbine: 30,000h Type: CFR5 G6a Power Max: 2500 kW Operational efficiency: 2200 kW Revolution number: 23000 rpm Live steam pressure: 65 bar Live steam pressure temperature: 480 oC Evaporation pressure: 1-17 bar Investments in the year 2002 Entire steam transforming station from 63 bar to 2.5 bar renewed in 2002, El. Generator Leroy Somer, el. Power 2 MW Renewed measuring Entire -, governing and control of the turbine renewed Steam turbine renewed Installed boiler efficiency: Boiler I Hard coal Steam generation: 20 t/h, 63 bar, 495 oC Boiler II Hard coal Steam generation: 13 t/h, 34 bar, 425 oC Boiler III: Combination burner for oil and gas Steam generation: 20 t/h, 17 bar, 285 oC General overhaul of the entire plant from 2002 to 2004 Steam generator renewed automatic cole-loader ...

Vibration table / table We offer: used vibration table / table Condition: good, ready for use Manufacturer: unknown Year of constr.: 1995 estimated Dimensions: Width: 3500 mm Length: 8000 mm Height: 550 mm Steel quantity: approx. 8 mm Weight: estimated 3500 kg Vibration / vibration motors: 6 pieces Manufacturer: Bosch Type: Connection data: 250 V, 3 A; 1.0 KW; 200 Hz Speed: 5700 RPM The supply of vibration / vibration motors via a central frequency converter Bosch (for 2 toggle vibration tables and 6 vibration tables. This when purchasing multiple systems can be purchased: Technical data frequency: Produced for Bosch from the Flender sky / Tübingen Type: 2 GR132/135 (poorly readable) Motor: 11 KW, 380 V, 50 Hz; 22.5 A, 2880 rpm, cos.phi 0,89 Converter sec.: 11 / 12,5 KW; 250 V, 200 Hz, 2 26, 4 / 28; 9 A Control: Bosch Accessories: 2 or 4 forms for dominoes (see photos) More ...

-Sale by owner AT THE CAMP ERICH PETER MACHINES-PLANTS GMBH A - 7083 Purbach - Austria Mobile: +43-664-3358378 office@machines-plants.at www.machines-plants.at for fully automatic packaging of block and bricks in Special design for stacking and setting up concrete elements Drive: Electro-hydraulic, wheels of the clamfore truck made of Vulkollan Stacking device: All-wheel steering with + 90 0 steering impact from straight line. Control: PLC from Siemens The respective stowage inserts are detected by light barriers Hydraulic: Gear constant pump, ultra-fine filter in high-pressure circuit, return filtering Front and rear wheels can be steered separately or separately. Maximum stacking height of the forklift 1,250 mm Special gripper clamp, in which a complete stoare is held and can be handled, a set of gripping jaws for hold ...

Robust snow plough/bulldozer shield/shield combined with Hardox segment scrapers with plate suspension. Softer suspension available for pure snow removal. Shield can be shortened to 1500 mm width and reduced in height. Re-insertable for rolling the snow on top. Plastic scrapers for asphalt protection available as an option. Adapter plate for attachment to tractor, truck, etc. included in the price. For attachment to wheel loader and forklift, or front three-point height adjustment can be omitted (low price). technical data: - Shield width 2600 mm can be shortened to 1500 mm, widened up to 3600 mm - asymmetric design possible - Clearance width at 36 slants: 2100 mm - Height 875 mm (minimum height 670 mm) - Total length with adapter 1120 mm - hydr. Hug 300 mm - extremely stiffened for earth movement, gravel, food, debris, etc. - Scraper slurs segmented with plate suspension, o ...

Trapezoidal sheets - RAN 35/207 for roof and wall from 5,70 / m² (net) Profiled sheeting produced steel profiled sheets to measure! In thickness 0.50 mm (similar to RAL 3009) and a minimum order quantity of 1001,00 m², with us, get special items produced to measure. At a quantity up to 100.00 m² (sheet thickness 0.50 mm) = 6,23 / m² (net). At an additional cost of 2.22 m (net) get m² us also with Antikondensbeschichtung (anti drip coating/nonwoven coating). Prices for corrugated sheets as special items to measure direct from the manufacturer Special items Checkout, payment & pick up/delivery Only our terms and conditions, available at abc.ranrode.com, are based on our offer. We again expressly please indicate that our offer includes no technical editing (auditable statics, laying, color concepts, etc.). Therefore, we advise to statically verify our offer befor ...