We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,888 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
This Pullmax 4000 Punching machine was manufactured in the year 2001 in Sweden. The machine goes with a wide range of tools and computer software. The machine at the moment is not under power. Contact us anytime for further questions.
used
This AMADA EM2510NT Punching machine was manufactured in the year 2004.
used
This HACO PM 310V-3 Punching machine was manufactured in the year 2007 in Belgium. It is equipped with a TPC 50 Graphics control unit.
used
Length minimum: 2500 mm Length maximum: 5000 mm Capacity round: 1270 mm Capacity square: 1270 mm Thickness maximum: 6 mm LKI 250 loading arm PR 250 un-loading arm Storage Tower Table load: 150 Working area X Axis: 2500mm Working area Y Axis: 1270mm Working area X Axis with override:5000mm Punching force: 20T Maximum sheet thickness: 6,4mm Turret position: 31 Auto indexing positions: 3 Positioning speed X and Y Axis: 128.000mm/min. Change speed revolver: &nbs ...
used
Good working conditions
used
Salvagnini S4.40 punching machine with shear system CNC control: Salvagnini SysCon Specifications: Working area: 4064x 1803 mm Max dimension of the sheet: 4064x 1803 mm Min dimensions of the sheet: 370x 300 mm Min and Max Thickness: 0.5 -5 according to the material used Maximum weight of the sheet: no limit Grippers for automatic positioning of the blehe: 13x Technology: Multi-press punching head with hydraulic drive Time for the replacement of the punching tool: 0 sec (each tool is ready for use= Simulation Possibility of activating two or more punching units Weight : 19000 kg Machine dimensions: 9967x6426 mm Power 63kW Air supply: 5 bar Punching Productivity & Cutting Productivity Maximum material thickness: Alumumuim with breaking strength 200M/mm²: 5.0 mm Steel with breaking strength 410N/mm² : 3.5 mm Stainless steel with breaking strength 680 N/mm²: ...
used
Force 1 -54 kN Stroke 0 – 220 mm Capacity range M3 – M6
used
Capacity 1000 x 30 ton Discharge: 1000 mm X axis displacement: 2250 mm (max 10,000 mm with repacking) Index rotating punch head 6-way multi-tool
used
Magazzino DANOBAT 3 mt. 15 postazioni Circa 15 aanni
used
Capacity 30 tons Discharge 1000mm Repacking up to 10000mm Including chest of drawers with lots of tools and multi-tools
used
AIDA A-SF-7000S (40 ton) press year `2005 for sale. For more information, contact by email (koma7240daum.net) or whatsapp (+821037187243)
used
Working hours machine: 36101 h Max. punching force: 200 kN Working range punching: 2000 (4000) x 1270 mm Control: Fanuc 18-P Length: 6190 mm Width: 5000 mm Height: 2450 mm Machine weight: 12000 kg
used
Working hours machine: 46115 h Max. punching force: 180 kN Working range punching: 2500 x 1250 mm mm Control: Bosch MTX CMP 70 Max. sheet thickness: 6,4 mm Length: 6500 mm Width: 6000 mm Height: 2252 mm Machine weight: 9800 kg Electrical connected load: 18 kVA
used
The notching machine is in used condition and is fully functional. Ideal for the production of round or square air ducts. - Incl. substructure table with castors - Pneumat. Actuation via foot switch Condition see pictures. Visit and demonstration possible. The indicated price is a net price for collection ex works. A chargeable transport within Germany can be organized on request.
used
Type: Turret punching machine Finn Power Model: C5 YOM: 2007 Capacity: 30 Ton Maximum Sheet Thickness: 8 mm Maximum Sheet Size: 2530x1270 mm Minimum Sheet Size: 300x100 mm Maximum Sheet Weight: 200 kg Number of Stations: 20 Turret Speed: 24 RPM The machine is still working. You can do an inspection. On request, I will send additional information and photos.
used
Punching force: 630kN, stroke adjustment: 10-80mm, ram adjustment: 80mm, stroke speed: 65-400/min, connected load: 11kW, length: 1590mm, width: 1650mm, height: 3000mm, weight: 9.5t, with documentation.
used
Nominal punching force: 60t, stroke speed: 60-200/min, tool installation height: 240mm, ram adjustment: 50mm, max. strip width: 250mm, max. strip thickness: 3.5mm, max. tool length: 600mm, with documentation, was maintained regularly, the machine has been idle for five years
used
Including documentation, tools, lubricants and roller tables.
used
Max. stroke speed: 600-2000/min, feed: 10-80mm, with oil cooler.
used
Including accessories and documentation.
used
Max. pressing force: 30t, stroke speed: 100-600/min, stroke adjustment: 8-40mm, length: 1200mm, width: 1160mm, height: 2150mm, weight: 2.5t.
used
Max. pressing force: 30t, stroke speed: 100-600/min, stroke adjustment: 8-40mm, length: 1200mm, width: 1160mm, height: 2150mm, weight: 2.5t.
used
Max. pressing force: 30t, stroke speed: 100-600/min, stroke adjustment: 8-40mm, length: 1200mm, width: 1160mm, height: 2150mm, weight: 2.5t.
used
Max. pressing force: 30t, stroke speed: 100-600/min, stroke adjustment: 8-40mm, length: 1200mm, width: 1160mm, height: 2150mm, weight: 2.5t.
used
Max. pressing force: 30t, stroke speed: 100-600/min, stroke adjustment: 8-40mm, length: 1200mm, width: 1160mm, height: 2150mm, weight: 2.5t.
used
Max. pressing force: 30t, stroke speed: 100-600/min, stroke adjustment: 8-40mm, length: 1200mm, width: 1160mm, height: 2150mm, weight: 2.5t.
used
Max. pressing force: 30t, stroke speed: 100-600/min, stroke adjustment: 8-40mm, length: 1200mm, width: 1160mm, height: 2150mm, weight: 2.5t.
used
Full complete line SACMI for plastic caps.
used
Max. punching force: 40t, stroke: 10-50mm, the automatic lubrication needs overhauling.
used
With dual stroke, max. punching force: 40t, stroke: 30-60mm.
used
Pressing force: 160kN, stroke speed: 200-1000/min, with automatic handling/ infeed and documentation.
used
Punching capacity: 300kN, max. sheet dimensions: 1270x3660x6,4mm, max. table load: 100kg, connected load: 35kVA, length: 3778mm, width: 4601mm, height: 2245mm, weight: 13.5t.
used
Inv. Num. : 6435 Type: MTX Flex 6 Producer: Euromac Generated: 2014 Parameters: Software: RADAN Operating hours: 19932 h Switch-on hours: 12452 h Compressive force: 30 t Machine height: 1900 mm Machine length: 4840 mm Machine width: 3630 mm Equipment: Multitool Flaps
used
• Machine number: 4221875989007 • Punching force max: 800kN • Material thickness max: 25 mm • Punching device max: Ø 90 mm • Accessories according to photos (sold separately on request)
used
RASKIN RT 64-2 punching machine manufactured in Switzerland in 1981, is designed for precise punching of holes in workpieces made of e.g. stainless steel, with a force of 30 tonnes. Technical parameters of the RASKIN RT 64-2 punching machine - maximum press force: 30 t - CNC control - number of strokes: 400/min - power supply of machine RT 64: 3x 380 V; 50 Hz
used
Max. pressing force: 250kN, stroke: 13-38mm, stroke speed: 875-1500/min, connected load: 20kW.
used
Max. punching diameter: 30mm, max. punching force: 500kN, throat depth: 610mm, stroke: 0-60mm, weight: 1.69t.
used
Pressing force: 40t, stroke adjustment: 13-57mm, ram adjustment: 60mm, stroke speed: 60-1200/min, connected load: 15kW, weight: 6t, with documentation, an inspection is possible.
used
Used SMG HZPUX 350/200 - 1500/1300 moulding press in good condition! Main technical data: - Power: 510 ton - Maximum span with castle: 1460 mm - Minimum light with castle: 520 mm - Maximum span without castle: 2160 mm - Minimum light without castle: 1220 mm
used
Name: Sprout punch Manufacturer: Schleicher, 8192 Gerelsried/Obb. Machine number: 8922 Year of construction: 1985 Condition: used, completely revised and tested - pneumatically operated rung punch - working height (cutting height): approx. 150 mm - working width (cutting width): approx. 120 mm - Width (incl. table extensions): 1520 mm - Depth: 600 mm - Height: 1120 mm - Two-hand operation - with angle stop - with length display (ruler) - with adjustable supports for processing palatine strips - Compressed air connection: 5 bar - dust-free working - Table extension left + right (removable) - Stops left + right removable - adjustable for single miter 90° and double miter 45° - 1 x sliding stop Transport dimensions (W x D x H): 1520 x 700 x 1370 mm on pallet Weight: 95 kg (incl. pallet) (Changes and errors regarding technical data and prices excepted!) In ...
used
Max. punching force: 240kN, working area: 1250-2500x550-1100mm, weight: 3.5t, available die diameter round: 3.1/ 4.1/ 4.2/ 5.2/ 6.5/ 8.2/ 10/ 11/ 12/ 13/ 16/ 17mm, longitudinal: 9x16/ 9x20mm, with documentation, an inspection is possible.
used
Catalog No. : 6536 Type: TRUMATIC 500 R Producer: Trumpf Made in: 2000 Characteristic: Hours on: 36200 h Pressing force: 220 kN Travel length X-axis: 2500 mm Travel length Y-axis: 1250 mm Machine weight: 11050 kg Equipment: Tool Cartridges (2x) USB Interface
used
Machine was completely rebuilt electrically in 2008 and equipped with a new control cabinet, all accessories are included, without conveyor belt or material dispenser, the machine is ready for use, an on-site inspection is possible.
used
Hydraulic pressure: 200 bar, with documentation and length stop, on-site inspection is possible, was used for cutting steel reinforcement pipes for plastic profiles to length, the machine has currently been standing under cover in an outdoor storage facility for two years, the linear guides are affected by rust film, a function test cannot currently be carried out.
used
Punching force: 6t, ram stroke: 16mm, flywheel rotational speed: 325-720/min.
used
Clamping surface: 1700x950mm, table dimensions: 600x200mm, feed: 600mm, length: 3500mm, width: 2200mm, height: 1150mm, shafts front side: 5 each top/bottom, including 7x slides, 2x welding control DTW 1Z1P, 2x resistance welding unit ET 15.1/15kVA power, without documentation, an on-site inspection is possible.
used
1250 x 2500mm with SheetMaster loading/unloading - Lots of tooling
used
The machine was used for punching clay bowls, max. mould dimensions: 200x220mm, pressing force: 6kN, including plastering machine, oiling device and oil tank.
used
Format: 1000x700mm, an inspection is possible.
used
Format: 570x820mm, an inspection is possible.