punching table used for sale

Manufacturer: Automatex Model: CBF Year of Manufacture: 2008 Technical Specifications: - Working width: 2.500 mm - RPM: 1200 - Needle Density: 2x 460 N/m - Needles: 5000 N/m - Stroke: 60 mm - Needle boards: 1 set (two boards) Find more here - .ucymachines/ Contact us at - sales@ucymachines

CNC punching machine manufactured in 2019. This Euromac MBX 6 Plus 1250/30-2250 features a total of 24,439,006 hits and a total working time of 11,309 hours. It includes a CNC control system with a dedicated console and a brush table to prevent sheet scratching. If you are looking to get high-quality punching capabilities, consider the Euromac MBX 6 Plus 1250/30-2250 machine we have for sale. Contact us for further details.

Inv. Num. : 9160 Type: Trumatic 500R Producer: Trumpf Created: 2003 Parameters: Compressive force: 22 t

Electric drive Foot switch actuation, Various tools are included in the delivery: 1 x top/bottom knife with radius 4 mm 1 x top/bottom knife with radius 6 mm 1 x top/bottom knife with radius 7 mm 1 x top/bottom knife with radius 8 mm 1 x top/bottom knife with radius 9 mm 1 x top/bottom knife with radius 15 mm (currently in use)

max. format 26 x 38 cm Built in 1964 Inking unit not complete 2 locking frames Dry pollinator Delivery date: immediately from stock

Manufacturer: FEHRER Model: NL9/S Year of Manufacture: 1991 Specifications: - Stroke: 60mm / max. 1,200 RPM - Needles: 1x 3,000 N/m - Working width: max. 2,600 mm Including: - Control Panel - Control Cabinet Find more here - .ucymachines/ Contact us at - sales@ucymachines

X-axis: 2500mm, Y-axis: 1270mm, positioning speed X-axis/Y-axis: 80/90m/min, simultaneous axis speed: 100m/min, punching capacity: 200kN, number of turret stations: 51, max. material thickness mild steel: 3.2mm, max. material weight at traverse speed F1/F4: 50/150kg, positioning accuracy: ±0.1mm, stroke rate X-axis: 350/min, stroke rate Y-axis: 260/min, max. stroke length: 42mm, max. feed speed X-axis/Y-axis: 80/60m/min, turret speed: 30rpm, compressed air requirement: 500l/min, operating air pressure: 5bar, connected load: 19kVA, length: 4165mm, width: 5120mm, height: 2082mm, height with mirror: 3028mm, weight: 13t, operating hours: 4531h, regularly maintained by the manufacturer, with documentation, without punching tools. An on-site inspection is possible.

pressure: 25 t no. of strokes: - Hub/min sheet width: - mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 6-axis Baykal BPM-T 1525X30 was manufactured in 2020, featuring a robust 30-ton hydraulic punching force and a versatile tooling system with 20 stations and indexable tool holders. It supports a working range of 3000 × 1500 mm and rapid axis speeds (X: 100 m/min, Y: 80 m/min). Equipped with Bosch MTX CNC control and Lantek CAM software, it ensures precision and efficiency. If you are looking to get high-quality punching capabilities, consider the Baykal BPM-T 1525X30 machine we have for sale. Contact us for more information.

CNC Punching Machine manufactured in 2005. This DANOBAT P1631 features a punching force of 30 tons and can handle a maximum sheet thickness of 6 mm. It includes an automatic loading system, servo-driven axes, and a hydraulic punching system. If you are looking to get high-quality punching capabilities, consider the DANOBAT P1631 machine we have for sale. Contact us for further details.

A CNC punching and cutting system Finn-Power in need of repair, including an automation and stacking system STR 6, is available. Punching force: 300kN, cutting force: 250kN, max. operating pressure: 300bar, max. material thickness: 8mm, max. punching diameter: 89mm, turret stations: 20, axis speed: 150m/min, positioning speed: +/-0.1mm, repeat accuracy: +/-0.05mm, machine weight: approx. 28000kg, operating hours: approx. 40342h. The thread-cutting unit is non-functional. Documentation available. An on-site inspection is possible.

This 3-axis Euromac ZX INDEX was manufactured in 2004. It features a maximum punching force of 300 kN and a working area of 1250 mm in the X-axis and 1000 mm in the Y-axis. The machine is capable of processing steel up to 7 mm thick. If you are looking to get high-quality punching capabilities, consider the Euromac ZX INDEX cnc punching machine we have for sale. Contact us for further details.

This 3-axis TRUMPF Trupunch1000 S05 was manufactured in 2018. It features a working area of 2500 x 1250 mm and is equipped with maintenance-free three-phase motors. The machine includes a linear magazine with 20 stations for clamps and tools, and an electro-hydraulic punching head with programmable features. If you are looking to get high-quality punching capabilities, consider the TRUMPF Trupunch1000 S05 CNC punching machine we have for sale. Contact us for further details.

3:1 Wire punching and locking system, Stamping tool 3:1, round hole 4 mm, Working width up to 420 mm, Max. stamping capacity per the manufacturer: 30 sheets/80 g/m², foot switch, operation manual, A small palette with 3:1 wire-binding elements is included in the delivery.

Manufacturer: Finn-Power OY, Kauhava, Finland Model: F6 SV Year of manufacture: 2005 Machine weight: 13500 kg Operating hours: approximately 66,603 hours Note: housing is not included in the purchase Technical Data - Punching force: 30 t (300 kN) - Maximum workpiece size (L x W): 4061 x 1528 mm - Maximum workpiece thickness: 8 mm - Maximum workpiece weight: 200 kg - Rapid traverse X axis: 80 m/min - Rapid traverse Y axis: 60 m/min - Number of turret stations: 20 - Turret rotation speed: 30 rpm - Tool type: thick turret - Maximum tool diameter: 89 mm - Tool change time: 1 to 3 seconds - Maximum CNC rotating tool diameter: 89 mm - Maximum CNC rotating tool speed: 58 rpm - Maximum travel speed: 100 m/min - Drilling accuracy: 0.1 mm - Positioning accuracy: 0.08 mm - Power supply: 47 kVA - Average power consumption: 24 kW - Oil tank capacity: 330 l - Maximum operating pressure: 300 bar ...

Impressions=0 m, Condition= New , Availability= 2026-07-07, 16” Large full touch LCD screen. Fully automatic paper cutting function. Program storage capacity of up to 300 programs. 90,000 motion storage capacity. Maximum trench speed 36m/min. Cutting speed: 42-45 pcs/min Trench precision 0.01mm. Fully automatic paper cutting function. Eight language options. Measurement and blade movements can be seen on the screen. Metric system options. Data transfer via USB and programming and adjustment by PC. New modern design. It has many security measures. German security photocells. German hydraulic system. Italian oil pump. Panasonic servomotor. Siemens PLC. Italian balance valve.

CNC punching machine manufactured in 2013. This Euromac MTX FLEX 12 hybrid features a maximum punching force of 30 tons and an X-axis stroke of 1250 mm. The Y-axis stroke is 1300 mm for multi-tool setups and 1250 mm for single-tool configurations. If you are looking to get high-quality punching capabilities, consider the Euromac MTX FLEX 12 hybrid machine we have for sale. Contact us for further details.

Impressions=0 m, Condition= Very Good , Availability= 2026-07-07, 3 point gluing Side gluing Suitable for straight line boxes Bottom and top glue application discs available With standard equipment

Impressions=0 m, Condition= New , Availability= 2026-07-07, Servo Feeder Pre-Folding Section Side Gluing Crash Lock Bottom Bottom Gluing Unit (Left Side) Folding and Closing Section Motorized Trombone Section Folding and Closing Section Pressing Unit KQ” Brand 3 Cold Glue Guns Pneumatic Press LED Display Maximum Carton Weight: 800 g/m² Carton Type: B, N, E & F Flute Maximum Speed: 500 m/min Max. Folded Carton Thickness: 15 mm

Impressions=0 m, Condition= New , Availability= 2026-07-07, Max.Paper Size 600X420mm Min.Paper Size 280X233mm Max.Cutting Size 590X410mm Max.Cutting Speed 10000s/h/6000s/h(vision) Max.Pressure 180T Die-cutting Precision ±0.075mm Inside Chase Size 600X430mm Die Cutting Plate Size 600X420mm Height of Cutting Rules 23.8mm First Cutting Rule 8~16mm Min.Gripper Margin 9mm Max.Feeding Pile Height (incl.pallet) 900mm Max.Delivery Pile Height (incl.pallet) 800mm Thickness of Cardboard 80g/?~1000g/? Thickness of Corrugated Paper 0=2mm Total Power 10kw/12kw(vision) Weight 5T/5.5T(vision)

Impressions=0 m, Condition= Good , Availability= 2026-07-07, Description is coming

Impressions=0 m, Condition= New , Availability= 2026-07-07, DGM AUTOMATIC DIE CUTTING MACHINE • TYPE : TECHNOCUT 1050-S (with STRIPPING UNIT) • SIZE : 74 x 105 cm • YEAR : 2024 (BRAND NEW) DETAILS : Carton board min. =80 g/m2 Carton board max. =2000 g/m2 Corrugated board max. =4 mm Sheet size min. =350 x 400 mm Sheet size min. =740 x 1050 mm Speed =7500 s/h Cutting force =300 Ton Cutting size max. =730 x 1040 mm Gripper margin min. =9.5 mm Feeder =1600 mm Delivery =1300 mm

Impressions=0 m, Condition= Good , Availability= 2026-07-07, With chases and frames In a good condition Can be seen in our warehouse in Istanbul Available on October 2021

Punching Laser Machine Trumpf TruMatic 7000 Year of construction 2010 Rexroth IndraMotion MTX Controller Laser type: TruFlow 4000 Laser power: 4000 W Working Area:: Punching operation without repositioning: X 3,050 mm Punching operation: Y 1,550 mm Laser operation: X 3,050 mm Laser operation: Y 1,550 mm Combined operation: X 2,500 mm Combined operation: Y 1,550 mm Sheet thickness: max. 8 mm Workpiece weight: max. 280 kg Punching force: 220 kN X-axis speed: max. 100 m/min. Y-axis speed: max. 60 m/min. Simultaneous speed: max. 116 m/min. Maximum stroke rate:: Punching (E = 1 mm): max. 1,200 1/min. High Light: max. 3,000 1/min. Tools:: MultiTool tool change time: 0.3 sec. Number of tools/clamps: 21 /4 pieces Parts removal:: Workpiece size at the part removal flap (punching operation): 500 x 500 mm Workpiece size at the part removal ...

Key data: 220 kN, 8 mm, 3050 mm

Punching Laser Machine Trumpf TruMatic 7000 Year of construction 2010 Rexroth IndraMotion MTX Controller Laser type: TruFlow 4000 Laser power: 4000 W Working Area:: Punching operation without repositioning: X 3,050 mm Punching operation: Y 1,550 mm Laser operation: X 3,050 mm Laser operation: Y 1,550 mm Combined operation: X 2,500 mm Combined operation: Y 1,550 mm Sheet thickness: max. 8 mm Workpiece weight: max. 280 kg Punching force: 220 kN X-axis speed: max. 100 m/min. Y-axis speed: max. 60 m/min. Simultaneous speed: max. 116 m/min. Maximum stroke rate:: Punching (E = 1 mm): max. 1,200 1/min. High Light: max. 3,000 1/min. Tools:: MultiTool tool change time: 0.3 sec. Number of tools/clamps: 21 /4 pieces Parts removal:: Workpiece size at the part removal flap (punching operation): 500 x 500 mm Workpiece size at the part removal ...

Rotary Die Cutter Equipped with : FFU-4055 flat feeder unit RD-4055 rotary die cutter SPC-4055 separator

Manufacturer: Amada Year of Manufacture: 2007 Model: EMK3610NT Type of machine: Punching machine, including MP300 loading unit, tooling and Wilson X-Sharp grinding machine Capacity: 300 kN punching force Number of tool turret stations: 58 Power required: 27 kVA Noise level: 91 dB(A) Stopping distance: 360 mm Weight: 24,500 kg Transformer model: Marx TG 214 Transformer rated output: 30 kVA Transformer primary rated voltage: 3 x 400 V (plus or minus 10 percent) Transformer secondary rated voltage: 3 x 200 V Transformer primary rated current: 44 A Transformer secondary rated current: 87 A Transformer frequency: 50/60 Hz (plus or minus 1 Hz) Transformer supply fusing: 400 V / 27 kVA / 63 A Transformer insulation class: T 40 F Transformer protection rating: IP 23 Transformer dimensions (L x B x H): 740 x 550 x 680 mm Transformer gross weight with packaging: approximately  ...

Punching Laser Machine Trumpf TruMatic 7000 Year of construction 2010 Rexroth IndraMotion MTX Controller Laser type: TruFlow 4000 Laser power: 4000 W Working Area:: Punching operation without repositioning: X 3,050 mm Punching operation: Y 1,550 mm Laser operation: X 3,050 mm Laser operation: Y 1,550 mm Combined operation: X 2,500 mm Combined operation: Y 1,550 mm Sheet thickness: max. 8 mm Workpiece weight: max. 280 kg Punching force: 220 kN X-axis speed: max. 100 m/min. Y-axis speed: max. 60 m/min. Simultaneous speed: max. 116 m/min. Maximum stroke rate:: Punching (E = 1 mm): max. 1,200 1/min. High Light: max. 3,000 1/min. Tools:: MultiTool tool change time: 0.3 sec. Number of tools/clamps: 21 /4 pieces Parts removal:: Workpiece size at the part removal flap (punching operation): 500 x 500 mm Workpiece size at the part removal ...

Manufacturer: Boschert Year of Manufacture: 2014 Model: Compact 1000 Rotation Type of Machine: CNC punching machine with rotating head TECHNICAL SPECIFICATIONS - Punching force: 28 t (280 kN) - Tool system: Trumpf tool system, sizes 1 to 3, up to diameter 105 mm - Rotating head: all tools infinitely rotatable 360 degrees - Control unit: Boschert CNC 32050 control unit with TFT control panel - Working area: 1060 x 2080 mm - Sheet thickness capacity: up to 6 mm steel - Power supply: 3 x 400 V / 50 Hz - Connection load: 18 kVA - Control voltage: 24 VDC - Required fuse protection: 3 x 20 A METER READINGS (FROM CONTROL UNIT) - Machine on: 5,722 hours - Hydraulics on: 1,285 hours - Stroke counter: 2.3 million strokes Regarding the dimensions: The machine’s key technical specifications are as follows: working area 1,060 × 2,080 mm, punching force 28 t (280 kN), Boschert CNC 32050 con ...

Ponscapaciteit: 80 ton Diameter x plaatdikte: 40 x 15 mm / diameter 60 x 10 mm Keeldiepte: 510 mm Maximale snijdikte in plaat: 500 x 20 mm / 400 x 19 mm Bladlengte: 510 mm Hoekstuk van 90° afgesneden: 120 x 120 x 13 mm Hoek van 45° afgesneden: 90 x 90 x 10 mm Rond op lengte snijden: 45 mm Op maat gesneden vierkant: 40 mm Maximale materiaaldikte door inkepingen: 90 x 10 x 13 mm Length: 1800 mm Depth: 900 mm Height: 1800 mm Weight: 2380 kg

Punching machine TRUMPF TruPunch 5000

Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punching die, corner notching punch, punching punch, square notching punch, notching punch, notching tool -Punching tool: Square notching die for profile steel shears and flat steel shears -Width: 50 mm -Dimensions: see photos -Dimensions: 175/60/H125 mm -Weight: 6.6 kg

Two small punching machines for crimping binding spines are available. 1) Swigraph E420C punching and wire closing machine, max. working width: 430mm, binding element diameter range: 4.7mm-31.75mm. 2) Two-piece Ibico EP28/HB28 plastic comb binding system, punching width: 420mm, max. punching capacity: approx. 35/min, max. binding capacity: 500 sheets, machine dimensions X/Y/Z: approx. 550mm/450mm/600mm, weight: approx. 65kg. Documentation available. An on-site inspection is possible.

serial number: 28043 weight: 3 t pressure: 30 t volt: 380 V frequency: 50 Hz The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t no. of strokes: 30-70 Hub/min Max ram stroke: 130 mm ram adjustment: 100 mm table surface area: 950x630 mm ram surface: 630x600 mm throat: 340 mm dayligth: 480 mm coil: GSW total power requirement: kW weight of the machine ca.: 8,9 t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS ...

A Trumpf CNC punching machine is offered. Max. punching force: 180kN, working range X/Y: 2500mm/1250mm, max. sheet thickness: 6.4mm, max. workpiece weight: 160kg, max. punching diameter: 76.2mm, axis speed: approx. 100m/s, max. punching stroke rate: approx. 1000 strokes/min, max. marking stroke rate: approx. 2500 strokes/min, tool magazine: 18, clamps: 2, max. part size X/Y: 500mm/500mm, operating hours: 22146h. Including tool cassettes, various punches and dies, a MultiTool, and Easy Type. Weight: approx. 9.8t, machine dimensions X/Y/Z: approx. 6500mm/6203mm/2252mm. Documentation available. An on-site inspection is possible.

Key data: 280 kN, 6 mm, 2080 mm

Boschert Compact 1000 Rotation – CNC punching/nibbling machine for sheet metal working, year of manufacture 2014, serial no. 379. Technical key data: - Punching force: 28 t (280 kN) - Trumpf tool system, sizes 1–3, up to Ø 105 mm - Rotating head: all tools can be rotated continuously 360° - Control: Boschert CNC 32050 with TFT control panel and DXF import - Working range: 1,060 × 2,080 mm, repositioning for long sheets - Sheet thickness: up to 6 mm steel - Integrated CNC thread cutter Meter readings directly from the controller: - Machine on: 5,722 h - Hydraulics on: only 1,285 h - approx. 2.3 million strokes Last checked March 2026. Little run, technically very good condition. The short hydraulic running time makes the machine an attractive alternative to the cost-intensive purchase of a new one. Extensive, complete tool inventory including: large toolbox wi ...

HEIDELBERG GT -Max paper size 32X46 cms. -Inking unit with rollers -Frame, plate and all tools -Available immediately in our warehouse

Manufacturer: Trumpf Model: Trumatic 260 Rotation Year: 1991 Condition: Used Stock number: 9376 Compressive force: 25 t Maximum length of sheet metal plate: 2500 mm Maximum blade width: 1000 mm Maximum sheet metal plate weight: 150 kg Punching diameter: 38 mm Machine height: 1820 mm Machine length: 3800 mm Machine width: 600 mm Machine weight: 4300 kg Equipment: PC Spare parts 2x tin transport trolleys

Hermerding Type PPD/60/60 Compressive force 60 ton Lifting height 10-80 mm Installation height approx. 450 mm Table 600 mm x 500 mm Stroke rate approx50 -1/min

Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punching die, corner notching punch, punching punch, square notching punch, notching punch, notching tool -Punching tool: for profile steel shears, flat steel shears, 2 pieces -Hole spacing: 135 x Ø17 mm -Dimensions: see photos -Submission/Price: complete -Dimensions each: 175/107/H125 mm -Weight: 6.1 kg/pc.

Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punching die, corner notching punch, punching punch, square notching punch, notching punch, notching tool -Punching tool: Notching die for profile steel shears, flat steel shears -Dimensions: see photos -Dimensions: Die 240/90/H125 mm / Punch 200/85/H170 mm -Weight: 33.9 kg

pressure: 35 t no. of strokes: ca 72 Hub/min dayligth: 195 mm total power requirement: 1,5 kW weight of the machine ca.: 330-400 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. pressing force: 400kN, stroke rate: 100-1200/min, connected load: 18kW, compressed air connection: R 1/2inch, 6-10bar, adjustable strokes: 13, 15, 19, 25, 32, 38, 44, 51, 57mm, max. fixed stroke (special version): 57mm, ram height adjustment: 60mm, tool installation height: 4 Mm 677, max. width of tool installation opening: 690mm, max. strip passage width: 190mm, strip feed height above clamping plate: 60-140mm, bed opening: 640x220mm, lower clamping plate: 4 Mm 671, upper clamping plate: 4 Mm 672, installation dimensions: 4 Mm 667, length: 1695mm, width: 2185mm, height: 3010mm, weight with feed unit: 6.37t. Equipment: drive control, tool clamping plate, installation dimensions, upper clamping plate, hand protection device, BBV 41.202/150 strip feed unit, strip-end monitoring, transport and lifting device, complete documentation, installation, operating and maintenance instructions  ...

pressure: 25 t throat: 200 mm stroke: mm pressure: 25 t no. of strokes: 140 Hub/min window in frame: 240 mm adjustment of stroke: 8...80 mm ram - range of adjustment: 50 mm surface of ram: 355 x 220 mm table-size: 560 x 400 mm hole in table: 160 mm total power requirement: 3 kW weight of the machine ca.: 2,23 t dimensions of the machine ca.: m Press force: 25 t Throat depth: 200 mm Stroke: on request Press capacity: 25 t Strokes per minute: 140 spm Daylight opening: 240 mm Stroke adjustment: 8 – 80 mm Ram adjustment: 50 mm Ram face: 355 × 220 mm Table size: 560 × 400 mm Table opening: 160 mm Total power requirement: 3 kW Machine weight: approx. 2.23 t Distance between table and ram: 250 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

press capacity: 28 t x-axis: 2000 mm y-axis: 1000 mm machine weight ab.: 11000 kg Youtube-Video-Links: https://www.youtube.com/watch?v=LdcmUuj8QnM&ab_channel=BaestleinGmbH https://www.youtube.com/watch?v=IcEmqxjpnoE&ab_channel=BaestleinGmbH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2000 mm plate length: 1000 mm Punching capacity: 28 to weight of the machine ca.: 11.000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1015 mm plate length: 1015 mm plate thickness: 6,0 mm Punching capacity: 25 t punch diameter: 88,9 mm total power requirement: 16 kW weight of the machine ca.: 12000 kg dimensions of the machine ca.: 4000 x 2320 x 2300 mm Equipment: - Tool changer with 20 positions - FANUC Series O-P control - Foot pedal - Operating instructions (English) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2026 : 090237 : prompt, Zwischenverkauf v : Polen : 7950 € : 153.44 € : 1 : 47 to : 110 mm : 27 mm : 25x18 mm : 8 s : 16 mm : 700 bar : 479 mm : 135 mm : 388 mm : 117 kg MOBILE HYDRAULICS-POWERSTATION Double action - fully automated process of punching and return Wide range of hole diameters up to 27mm Intelligent control system with inching and automatic load detection Mode indicator light Protection against accidental start-up OPTIONAL: Gantry punching station for increased productivity and operation comfort € 710,- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Spanien : 11500 € : 220.8 € : 1 : 55 to : 500 mm : 40 x 10 mm : 37 1/min : 5 kW : 1550 mm : 1200 mm : 1950 mm : 1150 kg hydraulic drive table with gauge user manual in GERMAN and ENGLISH CNC options on request We have a big stock of punches and dies for immediate dispatch WE HAVE MORE THAN 700 REFERENCES! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.