punching table used for sale

Used semi-automatic tablet/capsule counter, produkcji firmy Kwang Dah z Tajwanu, model KDC-101. New: 2012 Capsules or tablets are counted in the machine by a sensor measuring the filling of the bottles. The sensor ensures accurate counting and dosing of tablets, lozenges, pills or transparent capsules. The machine is equipped with a compensator and a sensor that provides automatic adjustment according to the collected powder in the sensor window. Power supply: AC 110V/230V, 50Hz, single-phase, 5A Machine weight: 70kg Machine dimensions: 88 x 76 x 70 cm（length x width x height）

Cast iron bed Length: 2300 mm Width: 1900 mm Thickness: 200 mm Height on feet: 980 mm 5 T-slots horizontal and vertical T-slots dimensions: 60 x 35 mm Square dimensions: 365 x 365 mm Crack at a longitudinal T (see photo) Weight: approx 3 T

workpiece diameter: 350 mm workpiece weight: 99999999 kg workpiece height: 240 mm total power requirement: 7,5 kW weight of the machine ca.: 2 t dimensions of the machine ca.: m Seltene Gelegenheit: Teilüberholte Hochpräzisions-Rundtischflachschleifmaschine Rundtisch-Durchmesser 380mm Magnet-Durchmesser 350mm Schleifscheibenabmaße 300x25x76,2mm Tischdrehzahl variabel max. 200U/min Schwenkwinkel des Tisches +-3 Grad Schleifspindeldrehzahl 800-4200 U/min Leistung Schleifspindelantrieb 5KW Verfahrweg quer max. 225mm Verfahrweg vertikal max. 480mm Abstand zwischen Magnetspannfutter und Spindelmitte, max. 390mm Automatischer Kopfabrichter AF65: zum zylidrischen Abrichten der Schleifscheibe im CD-Abrichtverfahren (Abrichten während des Schleifprozesses) Hierdurch werden Schleifzeiten reduziert und Abrichtzeiten eingespa ...

Stock number: DT077, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tablet deduster, Dimensions: L 400 x W 350 x 300 mm

Stock number: DT072, In stock: Yes, Amount in stock: 1 pc., Item: Tablet compressing machine, Theoretical capacity: Max 72.600 pcs/hour, Stations: Circular with 22 pcs. stations, Tablet size: Ø 19 mm, Other: Control cabinet - Ø 11 mm set of formats

Stock number: D1214, In stock: Yes, Amount in stock: 1 pc., Item: Circular table, Standing: On a leg console, Tabletop diameter: Ø 1000 mm, Tabletop material: Laminate, Total height: H 950 mm, Manufacturer: King

Stock number: F423, Material: Painted model, In stock: Yes, Amount in stock: 1 pc., Item: Tablet counter, Standing: Table model, Motor: 220 Volt, Tablet: Max Ø 11,5 mm

Stock number: F728, Material: Painted model, In stock: Yes, Amount in stock: 1 pc., Item: Tablet counter, Standing: Table model, Motor: 220 Volt, Tablet: Max Ø 11,5 mm

Stock number: D698, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Separating table, Size: L 990 x W 570 mm, Legs: 4 pcs., Other: Roller conveyor in the bottom

Stock number: D857, Material: Aluminium, In stock: Yes, Amount in stock: 1 pc., Item: Table, Size: L 2500 x W 1260 x H 1000 mm, Legs: 4 pcs.

Stock number: D2030, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Table, Size: L 1100 x W 760 x H 820 mm, Legs: 4 pcs.

Stock number: D649, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Table, Size: L 1560 x W 700 x H 900 mm, Legs: 4 pcs.

Stock number: D1171, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Table, Size: L 1400 x W 900 x H 810 mm, Legs: 4 pcs. with wheels, Other: Tabletop and legs can be separated

Stock number: D2015, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Table, Size: L 1790 x W 700 x H 880 mm, Legs: 8 pcs., Shelf: 1 pc., Other: Raise/lower function, 0-200 mm

Stock number: D2009, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Table top, Size: Table top L 2800 x W 650 mm, Sink: Yes, L 500 x W 400 x H 180 mm

Stock number: D2029, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Table, Size: L 2200 x W 1000 x H 800 mm, Legs: 4 pcs.

Stock number: D1168, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Table, Size: L 700 x W 300 x H 600 mm, Legs: 4 pcs. with wheels, Shelf: 1 pc.

Stock number: D1095, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Table, Size: L 1000 x W 760 x H 1170 mm, Legs: 4 pcs., Shelf: 1 pc., Other: Fiberboard on top

Stock number: D1110, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Table, Size: Table top, L 2075 x W 700 mm, For wall mounting: Yes, Shelf: Leg frame with shelf, L 4000 mm, Other: Electric raise/lower function

Stock number: D1067, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Table, Size: L 1340 x W 750 x H 570 mm, Legs: 4 pcs.

Stock number: D1066, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Table, Size: L 1100 x W 800 x H 800 mm, Legs: 4 pcs., 2 pcs. on wheels

Stock number: D1006, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 2 pcs., Item: Table, Size: L 1000 x W 750 x H 740 mm, Legs: 4 pcs. with wheels, Shelf: 1 pc. with drain, Other: With grid-top

Stock number: D1052, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Table, Size: Table top L 2150 x W 700 mm, For wall mounting: Yes, Sink: Yes, L 880 x W 540 x H 240 mm

Stock number: D1183, In stock: Yes, Amount in stock: 1 pc., Item: Circular table, Standing: 4 pcs. adjustable legs, Tabletop diameter: Ø 1500 mm, Tabletop material: Nylon, Height: H 790 mm, Other: 4 pcs. stabilizer wheels

Stock number: D1003, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Table, Size: L 1885 x W 885 x H 900 mm, Legs: 4 pcs., 2 pcs. on wheels

Stock number: D959, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Table top, Size: L 1200 X W 800 mm, Other: With suction grid, L 800 x W 500 mm

Stock number: D957, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Table top, Size: L 1680 x W 800 mm, Sink: L 500 x W 400 x D 200 mm, Other: With ventilation

Stock number: D693, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Hose fluid bed table, Dimensions: L 3750 x W 620 mm, Capacity: Space for 5 pcs hose, Other: Incl. heat - Blower - Timer

Stock number: DT067, In stock: Yes, Amount in stock: 1 pc., Item: Tablet compressing machine, Construction: Manuel, Stations: 1 pc.

Stock number: DT055, In stock: Yes, Amount in stock: 2 pcs., Item: Tablet compressing machine, Theoretical capacity: 760-1520 pcs/min, Stations: 27 pcs. for two-layertablets, Tablet size: Ø 15,8 mm, Working pressure: 6,5 ton, Other: The machine has been renovated

A Schüco profile work table is available for sash hardware installation. Installation capacity: approx. 6-8 sashes/day, hardware: Schüco AvanTec, min. pressure: 0.7MPa, max. air flow rate: 20l/min, machine weight: approx. 1200kg. On-site inspection is possible.

Co-ordinate Table HIRSCHMANN - DRO system HEIDENHAIN, Information about technical data are not binding., Machine available subject to prior sale., Working table size: 400x240 mm, T-slots size: 10 mm, Number of t-slots: 4, Longitudinal travel x axis: 300 mm, Cross travel x axis: 200 mm

Used with brush pad, table size 1200 x 2000 mm, not swivelling

SCM steep conveyors for transporting the glazing beads after the outlet of the SCM window system. The stone conveyor is 2.60 m. high with a 6 m. conveyor belt to transport a miter glazing bead saw The size is: 2.20 wide x 2.60 high with 1.20 feet made in stainless steel. Motor 7.5KW due to start-up The conveyor belt is 6.50 m. long x 100 mm wide in the channel.

Work table packing table workbench with stainless steel top, rear upstand and 2x lockable containers RA1802 Work table made of metal, painted white, used worktop with stainless steel surface (traces of wear) Dimensions: Width: 2200mm depth: 600mm height: 775mm Lockable container with door (1x left, 1x right) Container in 2 different colors (turquoise and purple) Container dimensions: 300 x 410 x 550 mm (WxHxD) All prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: For individual, professional advice, simply get in touch with us. Simply contact us by phone or by mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team of Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Offer 25238 Specifications: - Max. load capacity with horizontal table top 350 Kg - Max. load capacity in all inclined positions 300 kg - Face plate diameter 400 mm - Through-hole / hollow shaft 125 mm - Face plate manually swivels left + right 0 - 90 ° - Rotary movement infinitely variable approx. 0.15 - 5.0 1/min - Right + Counterclockwise - E. footswitch - Welding current transmission approx. 350 A - Drive 400 V - Table height in horizontal position approx. 900 mm - Space requirement approx. W 1150 x H 900 x D 800 mm - Weight approx. 290 kg - Jaw chuck 250 mm

table length: 2400 mm table width: 1200 mm table height: mm : 4000 kg height of stroke: 510 - 1550 mm total connected load: 1,5 kW connected load frequency: 400 V weight of the machine ca.: 0.95 t Welding table on lifting table: Hole diameter: 28mm The table is made of 15mm thick S355 steel The surface is stained and oiled. Tolerance: +/- 1 mm at the top and +/- 1 degree at the sides. Side panels 150 x 10mm Ribbed bottom for reinforcement. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Size of table : 720 × 870 mm Height of ream : max. 165 mm Table height : 860 - 950 mm

Univ. swivel, tilt and turn table presumably DECKELUniversal tool milling machine attachment tableTable size: 700 x 400 mmGroove width: 14 mmGroove spacing: 46 mmMounting plate: width 550 mm x height 300/240 mm- Swivel and tiltable +/- 30- Rotatable 360Weight approx. 140 kg; used

Univ. swivel, tilt and turn tableAttachment table for Univ. tool barrel machineTable size 630 x 250 mmGroove width 14 mmRotatable and tiltable +/- 30Swivel +/-45- 4x T-grooveWeight approx. 120 kg; used

Güntner Recirculating Cooler with 3 ebmpapst EC Fans 1.8kW 700kW cooling capacity

Table, Drilling and Tapping Machine FLOTT Type TBZ 15 GLFabr. No. 32177027 year of construction 1986Drilling capacity 15 mmSpindle mount MK2Throat depth 195 mmPine stroke 80 mmTable size 275 x 200 mmColumn diameter 70 mmSpindle speed 80 - 4500 rpm. 18 stepsMotor power 0.55 + 0.75 kWNet connection 380 volts, 50 Hz- 6 belt steps from the motor and 2 belt stages to the drilling spindle 2 motor speeds- 3 pieces guide cartridges 0.7mm + 0.8mm and 28G available- Drill head height adjustment via crank with rack on the

Univ. Swivel, Tilt and Turn Table DECKELUniversal Tool Milling Machine Attachment Table suitable for FP 2L or FP 3L or FP 4LNr. 2314-0301 Year of construction: approx. 1975Clamping surface: 1000 x 520 mm- 6 clamping grooves 16 mm, distance 90 mm- Clamping plate can be rotated horizontally to the right and left up to 45 degrees- Tiltable from/to the machine +/- 15 degrees- Swivel +/- 15 degrees- Swivel table, tilting table, angle tablePermissible load max. 1000kgWeight: 400kggood condition; used

Clamping plate, machine table with metal baseClamping table, assembly table, clamping bracketClamping surface: 1200 x 370 mmD- Groove spacing: 90 mmTable height: 870 mm- Slot table used to be a machine table from a milling machine- 4 T-slots 16 mm- Metal substructure with height-adjustable feet- Multi-layer wood panel L x W x H 1200 x 400 x 18 mmOverall dimensions L x W x H 1400 x 770 x 870 mmWeight: 250 kggood condition; used

Hydr. Scissor lift table TREPEL - L. A. VAN EIJLE & Co.Year of construction approx. 1980Load capacity approx. 5 ton. Platform size 1700 x 1100 mmStroke max. 515 mmOverall height Table bottom with rail rollers 535 mmOverall height Table bottom without rail rollers 480 mmTable height raised with rail rollers max. 1050 mmTable height raised without rail rollers max. 995 mmTravel speed rail chassis approx. 8.5 meters/min. Motor power 4 kWNet connection 400 volts, 50 Hz hand switch for up and down on the cable safety limit switch

Cross table with stepper motor drivePrecision positioning systems UHLCrope table UHL type KT5-NSOCSerium No. 0008002Table size: 145 x 145 mmTable opening: 75 x 75 mmOverall height: 51 mmTravel distance: 50 mm per axisStraightness / flatness: 5 ?m- Drive per axis via 2-phase hybrid stepper motor, type ZSS 33.200.1,2- Manual adjustmentDimensions (cross table) L x W x H: 265 x 220 x 51 mmWeight: 3.5 kgvery good condition; used

Table unit from a DROOP & REIN portal milling machineClamping plate with T-slots made of cast steel-gray cast ironTable unit with clamping plate and very solid guidewayTable clamping surface 5500 x 2000 mmTravel distance of the table clamping plate approx. 3100 mmTable height-height 1050mmTable load: max. 20 ton. Ball screw: 100 mmThread pitch: 20 mm (single)- Machining table very stable on the bed- Metal telescopic guideway cover - comes from a DROOP & REIN portal milling machine- Longitudinal table movement over

Clamping table with T-slotsClamping plate, clamping block, groove tableClamping cube for radial drilling machineClamping surface top: L x W = 1200 x 800 mmClamping surface side: L x H = 1200 x 200 mmOverall height: 400 mmD- Grooves: 20 mmD- Groove spacing: 200 / 60 mmOverall dimensions L x W x H: 1200 x 800 x 400 mmWeight: 680 kg; used

Lift table HANDY type 1250E Table size: 700 x 700 mm Capacity: 250 KG Year of construction: 1998 Maxi lifting height: 1350 mm Voltage: 12 V Dimensions (L x W x H): 1400 x 600 x 1900 mm Weight: approx 250 KG