punching machines 1250 used for sale

Universal - NPR-55U Stanze Knee lever punch -Punching of paper, cardboard and plastics. -for simple stamping -The cutting blades can be recorded from the shaft -The cutting blades can be created also not attached just under the pressure plate. -The pictured tools are not part of the offer.

Punching machine (heavy duty) De Groot Model Punching Year 1980 Width 600 mm Available Direct

Format: A3 // Paper format: ca 31x45cm

Punching machine make WEINGARTEN type XKSHw 30Fabr. -No: 600/64, year of construction 1964Press force: 30 tSheet thickness: 1.5 mmStrokes per minute: 80 - 240Tappet adjustment: 45 - 20 mmRam stroke: 10 - 60 mmTable size: 300 x 500 mmOpening in the table: 120 x 220 mmDischarge: 170 mmPassage between the columns in front Machine: 400 mmExternal dimensions L x W x H: 1500 x 1400 x 2200 mmWith- Feed device- straightening station- modern control cabinet rear a.d. machineused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Punching machine make WEINGARTEN type XKSHw 30Fabr. -No: 764/59, built in 1959Press force: 30 tSheet thickness: 1.25 mmStrokes: 80 - 240Tappet adjustment: 45 - 20 mmRam stroke: 10 - 50 mmTable size: 300 x 500 mmOpening in the table: 120 x 220 mmDischarge: 170 mmPassage between the columns in front a.d. Machine: 400 mmExternal dimensions L x W x H: 1500 x 1400 x 2200 mmWith- Feed device- straightening station- modern control cabinet rear a.d. machineused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Punching machine make RASTER type HR 15/300 SL-4 SMachine -No: 101985 built in 1985Technical specifications:Punching force: 15 tCutting capacity at 40 kg: 375 mm²Smallest/largest table-ram distance: 245 / 275 mmSmallest/largest distance table-ram guide: 135 / 165 mmClamping table area: 500 x 500 mmDrop Hole: 350100mmRam area: 490 x 200 mmRam stroke small/large: 10 - 30 mmMax. ejector travel: 20 mmmax. ram adjustment: 50 mmNumber of connecting rods: 1Number of strokes of the machine: 200 - 2000 strokes/minDrive power: 10 kWMachine dimensions approx.: 1800 x 1800 x 2400 mmDimensions of control cabinet approx.: 1200 x 1000 x 1800 mmDimensions reel approx.: 1200 x 800 x 1600 mm:Weight machine approx.: 3000 kgWeight control cabinet approx.: 280 kgwith- separate control cabinet- Control panel- various toolsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading ...

Used machine in good condition. Available for immediate delivery. - Number of turret stations (pcs): 0 - Material thickness steel Fe52/Fe37 max: 0 mm - Material thickness aluminium max: 0 mm - Axis speed [X axis] max: 0 m/min - Operating hours: 0 - Material thickness (punching) max: 0 mm - Material thickness max: 0 mm - Material thickness stainless steel max: 0 mm - Simultaneous positioning speed (X / Y): 0 m/min - Punching speed (Hit speed max.): 0 1/min - Number of index tool stations, max: 0 - Tool rotation, max: 0 r/min - Control type: 0 - Compressed air pressure min: 0 bar - Compressed air consumption max: 0 l/s - Turret rotation: 0 r/min - Oil tank capacity: 0 l - Power supply: 0 kVA - Axis speed [Y axis] max: 0 m/min - Working area max: 0 mm - Punching force: 0 kN - Punch diameter max: 0 mm - Max. workpiece weight: 0 kg - Power: installed max: 0 kW - D ...

Condition: Very good condition

Alu window profiles Punching tool for end hole ventilation 4 stations

working range without repositioning X: 2535 mm working range Y: 1300 mm Control: Siemens Sinumerik 840D Punch power: 220 KN Laser power: 2200 Watt Plate thickness max.: 8 mm Beam on: 4.390 h Standard equipment: - Work range X-axis 2535mm for combined operation - Hi-Las high pressure cutting - Laser-cutting head with 5’’ lens - head quick change device - Programmable cutting gas/Pressure settings - Capacitive height regulation - Compact dust extractor - 2 sheet clamps - automatic tool change with 19 stations (21 minus sheet clamps) - Full rotation of all tools - NC-controlled, maintenance free 3-phase motor - Repositioning device - quick shut-down of hydraulic system - automatic machine shut-down - tool length compensation - chutes for parts 500 x 500 mm - punching slug suction system - metal forming possible - tool spray lubrication - Programmable stripper - adaptive stroke lengt ...

working range without repositioning X: 3085 mm working range Y: 1740 mm Control: Siemens Sinumerik 840D Punch power: 220 KN Laser power: 2400 Watt Plate thickness max.: 8 mm Beam on: 2.763 h Standard Equipment: - Working area for combined laser/punching 2585 x 1650 mm, for punching 3085 x 1740 mm, laser-cutting 3085 x 1650 mm each without resetting operation - HI-Las High pressure nitrogen cutting - laser head with 7,5 lens - programmable repositioning cylinders - quick stop function - Blow-out device for small parts - Safety light barriers - manual Additional equipment: - additional clamp and possibility to open one or a pair of clamps - Prepared for Multitool - Function tapping Automation: - TRUMALIFT SheetMaster FMC - sucker plate - Trumasort L - TRUMATOOL 40 - TRUMAGRIP New Resonator in 2011

working range without repositioning X: 2500 mm working range Y: 1270 mm Control: Bosch PNC-P Punch power: 165 KN Laser power: 3000 Watt Plate thickness max.: 6 mm Standard configuration Machine - Working Range 2500 x 1270 mm - Stable C-frame for easy access - Coordinate guide for high precision machining - Linear magazine with 19 tool stations including and 2 clamps - Drives with maintenance-free 3-phase servo motors - Repositioning unit with programmable stripper - Brush tables - Parts chute 300 x 500mm - Chip container - Good parts container - Enclosed beam delivery via fiber optic cable - ContourLine - FocusLine - NitroLine - Seperate main switch machine and laser Punching head - Hydraulic punching head - Programmable presser foot - Tool length compensation - Spray lubrication for punches - Vacuum slug removal - forming Control - Open controller based on ...

The best preserved Amada Europe 258 machine on the market Only 17,000 hours Year 2003 It can be seen at work only until the end of October this year

Punching machine Table 5m Automatic evacuation 8 tool charger 20T strike Perimeter security cell battery of tools

Following the closure of our manufacturing plant, we are selling our 2020 GEKA Punching Machine: - FLIP STOP device - Additional module with 8 stops and 2 feet - 6 additional stops

Hello, I have to sell a punching machine finn power lp6 laser trwagon welman 2500

Durma TP 123 CNC Punching Machine 30 Ton Machine is in good working condition

Power = 18t (up to 6.4mm) With the CAM TOPS 2000 software Speed up to 900 strokes per minute

Power = 18t (up to 6.4mm) Machine is available and under power. Price is not included tools. Only a few will be available Great condition, regular services from Trumpf. With the CAM TOPS 2000 software

TRUMPF MINIMATIC 100 punching machine. Perfectly functional from 1988. Regular maintenance.

30 Ton Metal table size : 2000 mm x 1250 mm Tools come with machine

Sell Coordinate punch press DURMA TP-123. Bought new in 2017. Service only with original spare parts, periodic service from the DURMA Turkey plant. The machine is in excellent condition, vulnerable nodes were recently replaced, with a total cost of $ 6700. A little dusty. Drum for 28 stations

Amada Aries 245 CNC Punching Machine 20 Ton Number of station: 20 Tools are included

30 Ton Metal Length : 2500 mm Metal width : 1500 mm Fanuc control unit Maximum steel thickness : 6 mm Machine is in very good condition and can be seen in working condition

20 Ton 2500 mm x 1250 mm Machine is full revised Metalix Cam program Machine is in good condition

Hydraulic punching machine for holes / beans, type: hls-55 metallkraft 2008. The machine is in very good technical condition - like new. - pressure 55 tons - max diameter of punched holes fi 40x10mm, fi 20x20mm - engine power 5.5 kW - weight 1300 kg We add several sets to the machine. punches and dies for cutting holes / beans.

Features: X Axis Travel: 2000m Y Axis Travel: 1000mm Number of strokes: 500/min Allowable weight on the table 100Kg Max thickness: 6.4mm Max drilling diameter: 76.2mm Weight: 9000Kg Power: 250Kn They: 380V/50Hz 23KVA Digital control: Bosch Trumagraph CC300

Brand: Euromac Type: BX 750 30 Capacity: 30 tonnes Year: 2002 Suitable for 1500 x 750mm plates (with packaging up to 10,000 x 750mm) Windows CNC control, easy to offer Multitool 6 times Various tools in the chest of drawers

- MAX SHEET LENGTH: (X/Y) - 2530 / 1270 MM - TABLE MAX PUNCHING DIAMETER: 89 MM - NUMBER OF TURRET STATIONS: 20 - PUNCHING FORCE: 200 KN -CONTROL UNIT: SIEMENS SINUMERIK 840D The machine is in excellent shape and powered. Any visits and inspections are welcome.

Used machine in good condition. Available for immediate delivery. - Number of turret stations (pcs): 20 - Operating hours: 21.500 - Axis speed [X axis] max: 90 m/min - Material thickness (punching) max: 8 mm - Control type: SIEMENS 840D - Compressed air pressure min: 300 bar - Turret rotation: 30 r/min - Oil tank capacity: 330 l - Axis speed [Y axis] max: 60 m/min - Working area max: 1.270 x 2.530 mm - Punching force: 230 kN - Punch diameter max: 89 mm - Max. workpiece weight: 200 kg

Technical characteristics: Model: TP 4025BIF3 / 21 / AM The year of production: 1994 Three-phase machine: 3x 400 V, 50Hz Power: 50 kVA Press power: 300 kN Weight: 11 t

PRODUTECH ALPI DECA N coil-fed punching machine which was built in Italy in 2010 is designed for precision punching, blanking and marking of sheet metal with a maximum thickness of 3 mm. The machine’s structure, made of thick electrically welded steel sheets, has all the necessary components to ensure the versatility of high-capacity mass production. One of these elements is the MultiTool head with punches designed for all types of machining, through which any shape can be punched. In addition, each of the punch holders and dies can be controlled independently, even during rotation. The machining process starts with the gradual unrolling of the sheet metal from the coil towards the punching station by the straightener and decoilers. A feed system consisting of rubber-coated and ground roller assemblies then moves the material during continuous machining without the need for stops or ...

Technology Italiana Tecnotransfer 15 SR punching machine year 2004

Year of manufacture: 1994 Power: 100 Tons Punching capacity: ø 50 x 15 mm Max punching ø: 90 mm 3 punching heads Gooseneck depth: 750 mm CNC table: 1500 x 750mm Tools User Manual

Used Imac HP 1000 X 2000 CNC punching machine Punching machine Imac mod. HP 1000X2000 with touchscreen CNC and cam software on board the machine equipped with various punches

Pega 244 punching machine year 1987 still in production well maintained complete with automatic loading and unloading mod. MP1020

Used Amada Vipros 255 CNC punching machine Year 1998 Complete with Lki 250 load unloader Machine still in production Well maintained

ALP Used pipe punching machine. Year of manufacture 1996.

The machine is in good technical condition. Upon prior arrangement, inspection is possible, the machine is dismantled and ready for shipment.

The machine is in good technical condition. Press force 30 tons (300 kN) Sheet format 1250×2500 (processing of flat bars up to 6000 mm) RS: Siemens By prior arrangement, the possibility of a tour in progress.

Description: Machine in good technical condition, possibility of testing after agreement. Table size: 2500 x 1270mm. Heidenhain 840D system. Accessories: punches and grinder.

Working hours 14272 hours Control unit Amada AMNC-F Punching force 20 Ton Metal length 2500 mm Metal width 1270 mm Sheet thickness 3.2 mm Metal width with repositioning 5000 mm Weight of the workpiece 150 kg Dimensions L 6080 x W 5120 x H 2318 mm Weight 16500 kg

Capacity: 30 tons Distance: 1000 mm 6-way multi-tool

Punching section equipped with CNC stop table with 3-fold punching head Rear equipped with NC push-on roller conveyor for the cutting section with feed belt Complete machine in very good condition, selling due to staff shortage

Distance: 1000 mm Punching force: 30 tons Index rotatable punching head Including various tools Includes multi-tool head Light screen security

The die cutting machine is in good technical condition. Pressing force: 30t Max. sheet size: 1000 x 2000mm By prior arrangement, the possibility of a tour in progress.

Machine weight: 13000 kg Sheet format: 2500 x 1250 mm Max. punching force: 300 kN Max. metal sheet thickness: 8 mm

Geka Hydracrop 110/SD punching machine Selling due to need for space Ask us for anything

Trumpf TC500 die-cutting press is in good technical condition, can be seen by agreement. Machine weight: 11050 kg Sheet format: 1300x2500 mm Max. punching force: 220 kN Max. metal sheet thickness: 6 mm Machine dimensions lxwxh: 5200x5200x2200 mm

LKI300 loading / unloading system - Control type: FANUC 04PC - Number of turret stations (pcs): 45 - Number of index tool stations, max: 4 - Punching force: 300 kN - Working area max: 2.500 (5.000) x 1.250 mm - Material thickness (punching) max: 6 mm - Dimensions (long x wide x high): 4.673 x 4.120 x 2.450 mm - Weight: 13.500 kg