punching machines 1250 used for sale

Inv. Num. : 6472 Type: A4 Producer: FINN-POWER Created: 1997 Parameters: Control system: Siemens Sinumerik 840 D Operating hours: 6100 h Compressive force: 23 t Maximum length of sheet plate: 2030 mm Maximum blade width: 1020 mm Max. sheet thickness: 8 mm Feed length X-axis: 2084 mm Feed length Y-axis: 1075 mm Maximum punching speed: 600 1/min Number of tools: 26 Punching diameter: 89 mm Machine weight: 10000 kg

Inv. Num. : 7033 Type: Trumatic 2020 R FMC Producer: Trumpf Created: 2007 Parameters: Compressive force: 18 t Maximum length of sheet plate: 2070 mm Maximum blade width: 1280 mm Max. sheet thickness: 6.4 mm Maximum punching speed: 60 1/min Punching diameter: 76 mm Machine height: 2080 mm Machine length: 6000 mm Machine width: 5600 mm Machine weight: 8000 kg

Inv. Num. : 4025 Type: CX 1000/30 Producer: EUROMAC Created: 2000 Parameters: Compressive force: 30 t Max. sheet thickness: 6 mm Total power requirement: 4 kW Feed length X-axis: 2000 mm Feed length Y-axis: 1000 mm Stroke: 60 mm Machine height: 1800 mm Machine length: 4000 mm Machine width: 2800 mm Machine weight: 6 t Equipment: Instruction manual of the punching press PC with pre-installed FabriWIN software to prepare programs for Extensive range of punches and dies Square - rectangular and circular profiles with multiple diameters New Head

Key data: 30 t, 1250 mm, 1250 mm

Euromac punching and nibbling machine type: CX1250/30 with light barrier, multi-tool and individual tools with extensive tool. With tool cabinets. The machine is in top condition and can be viewed under power.

Inv. Num. : 6351 Type: Pega 30507 Producer: AMADA Created: 1997 Parameters: Compressive force: 294 kN

Key data: 22 t, 2535 mm, 1280 mm

Manufacturer / Manufacturer: Trumpf Typ / Type: Trumatic 500 Rotation Stocknummer / stock number: 1008 Year of Manufacture: 1995 Punching force: 22 tons Max. sheet thickness: 8 mm Connected load: 19 kVA Machine weight: 13,8 tons

Key data: 25 t, 3000 mm, 500 mm

For cannibalization I offer a powerline 25-500, built in 1985, which works until the end Machine can no longer be tried; already partially dismantled. In 2017 both servo cards were new! Invoice available

Key data: 20 t

Punching Machine Manufacturer: Amada Type: Aries 245 Year of construction: 1989 CNC Control: Amada 04PA Operating hours: approx. 20,000 Punching force: 200 KN Sheet thickness (stainless steel) max.: 3 mm Sheet thickness (mild steel) max.: 4 mm Sheet thickness (aluminum) max.: 3 mm Travel: 1,270 x 1,000 mm Revolver: 20-fold (2x rotatable B-stations) Incl. complete set of tools ! Power: 11 KVA Dimensions: LxWxH = 2,700 x 3,784 x 1,950 mm Weight: 7,500 kg plus 2,500 kg foundation slab

Extra Accessories: SheetMaster Sheet Metal Supplier The machine is also working at the moment Make: Trumpf Type: Trumatic 6000L Year of construction: 2006 Hours: 90,119 Travel – x – 3085 mm Travel – y – 1550 mm Travel – x (combined) – 2500 mm Cutting capacity for mild steel – 8 mm Cutting capacity for stainless steel – 6 mm Cutting capacity for aluminium – 4 mm Workpiece – 230kg Punching force - 180 KN Punching speed – 917 1/min Watt laser power: 2700 Dimensions (LxWxH): 8400x8500x2200 mm

Machine Type: Punching/Nibbling Machine Manufacturer: EUROMAC Type: ZX INDEX Year of construction: 2007 Condition: used / good Offer will only be sent if a complete imprint is provided! Location Warstein , Germany Reference MV-KÖL-0424-3 DESCRIPTION We offer you a used CNC punching nibbling machine from the manufacturer EUROMAC. Working range X axis / 1250 mm Working range Y axis / 1000 mm Working range X axis with transfer / 2000 mm Punching force / 30 T Weight approx. 4900 kg further data on request. Availability: by arrangement Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions and payment terms. Errors in the descriptions and offers ...

This TECHNOLASER 2000w Turret punching machine was manufactured in 2005 in Croatia. It has a 2000 W laser generator power, with a maximum X-axis stroke ranging from -10 to 3010 mm and a maximum Y-axis stroke ranging from -10 to 1510 mm. It has a X-axis positioning speed of 100 m/min and a Y-axis positioning speed of 60 m/min. The machine can handle sheets weighing up to 350 kg. Contact us anytime for further information.

This BOSCHERT Compact 750 Punching machine was manufactured in 2018. It has a table size of 750 mm (X-axis) and 2000 mm (Y-axis) and a punching depth of 750 mm with a maximum punching diameter of 105 mm. This punching machine is equipped with a punching force of up to 40 tons. Maximum cutting thickness for normal steel is at 6mm. It is build in a C-frame construction with appropriate oversizing. The cantilever structure allows for machining of parts larger than the machining space.

This Euromac MTX Flex 6 Punching Machine was manufactured in 2014 in Italy. It has been working for only 3094 hours. It is equipped with a Euromac TopPunch control unit. This machine can operate with a punching force of 300 kN. It includes as additional equipment some drop tooling and safety light barriers, everything is brand new, never used. Also software is included. This machine like a new one.

This AMADA ARIES 245 (1993) Punching machine was manufactured in 1993 in Croatia. This CNC Punch Press has a capacity of 200 kN (44093 lb) and 19 tools. It operates at 11 KVA power and weighs 7.5 tons (16535 lb). The power supply is three-phase with voltage options of 460/400/230/230 volts and frequencies of 60/50/60/50 Hz, with a trip current of 7.5/7.5/10/10 KA. Contact us anytime for further information.

DIE CUTTER HEIDELBERG GT -Max paper size 32x46 cms. -Complete with ink unit and rollers -Two frames, plates and accessories -In production, available immediately

DIE CUTTER OMCSA MARTIA MODEL F -Years 1980 -Hand fed die cutter max paper size 120x83 cms. -Internal die cutting size 117x77 cms. -Mechanical clutch, new motor -Two frames, plates and accessories -In production, available in June

Danobat PZ1631 Punching & Shearing machine (year 2005) In operation. This punching/shearing machine has automatic loading with 2 tables, punching and shearing field without replacement of 3000×1500, angular shears of 1500×800. It has unloading with a conveyor belt, it consists of 1 autoindex with a 5-tool multitool and another 3 tools plus 2 units, with a total of 47 tools. Technical characteristics: Carriage travel: X3000 – Y1500mm Maximum format: X3000-Y1500mm Shear: 800x1500mm with regulation Power: 30kva Air: PZ 100 Load 250 N/min Weight: 16t Punching: Punching force: 300 KN Material thickness: 6mm Overall stroke: 40mm Actual Stroke: 35mm Hydraulic cylinder: 130×120 Working pressure: 280bar Number of blows: 750 blows/min Positioning resolution: 0.1mm Shears: Max speed: 80m/min Hydraulic cylinder: 63x56x225 Number of Strokes: 60 strokes/min Working p ...

3000 x 1500mm LOW HOUR MACHINE with Compact Express / Brush Tables

Inv. Num. : 7488 Type: Aries 245 II Producer: AMADA Generated: Parameters: Compressive force: 200 kN Machine height: 1963 mm Machine length: 3814 mm Machine width: 2560 mm Machine weight: 11600 kg

Punching machine Trumpf TruMatic TC3000-1300 FMC Year of construction 2004 82500 Hours (03.2024) Here is the configration : TruMatic TC6000-1600 FMC Year of construction 2005 Working area: 2585 x 1650 mm Standard equipment: - Stable C-frame - Coordinate guidance with integrated linear magazine, 21 slots for tools and clamping claws. - 3 clamping claws - Drives: Maintenance-free three-phase servo motors - Programmable hold-down device for resetting - Sensor-monitored parts chute 500x500 mm for punching and laser station, ejection cylinder on laser chute - 2 boxes of good parts - Laser unit: High-frequency excited CO2 laser TLF 2000, vibration-isolated in the machine frame, incl. cooling unit and laser control DIAS 3 - HI-LAS high-pressure cutting - ContourLas for making small holes - Programmable cutting gas pressure setting - Laser cutting head: 5" lens, quic ...

The LVD EHT DELTA 1250 RS TK turret punching machine was built in 1999. It is equipped with a MNC 32000 CNC control. The punching machine has a maximum pressure of 20 tons and allows the processing of a sheet with dimensions of 1250×1250 mm and a thickness of 4.5 / 6 mm. The machine performs a maximum of 650 beats per minute. The press is equipped with a hydraulic system, a turret with four stations (A, B, C, D) and a clearance adjustment sensor G8823142. Technical parameters: – CNC control: MNC 32000 – maximum pressing force: 20 tons – sheet dimensions X x Y: 1250 x 1250 mm – sheet thickness: 4.5 / 6 mm – maximum number of strokes: 650 1 / min – rated number of strokes: 300 1 / min – oil tank: 200 L – total power: 18.7 kW – engine: 11 kW – voltage: 400 V – weight: 17 tons Hydraulic System – Thick Turret: – instrumentation: station A, B, C, D  ...

Manufacturer LVD Model Delta 1250 TK Year 1997 Capacity 20 Ton Machine is in good condition

Number of station : 5 ( index : 2 ) 2000 mm x 1250 mm Machine is in good condition

5 station tool changer with auto index Discharge 1250 mm Capacity 30 tons incl. many tools

The punching center is in good technical condition. Pressing force: 30t Fabriwin toolkit and software included By prior arrangement, the possibility of a tour in progress.

Inv. Num. : 5451 Type: 1250 F1 Producer: SIMASV Created: 2011 Parameters: Compressive force: 30 t Maximum sheet thickness: 6.3 mm Maximum punching speed: 450 1/min Punching diameter: 89 mm Machine height: 2400 mm Machine length: 4200 mm Machine width: 3700 mm Machine weight: 5500 kg

The machine has: -3 punching heads with quick-change tool system -fast tool change -2 sheet clamps - use of all types of punching and forming tools of the Trumpf standard - X-axis 0-3000 Y-axis 0-1250 - positioning speed of the axes 60 meters per minute, positioning accuracy 0.05 mm -automatic height adjustment of the tool stroke Specifications: punching force - 28 t adjustable height of striker stroke - for one stroke 105 mm maximum punching diameter - 90mm maximum thickness of the processed material - 6 mm

Machine is in good condition Power : 30 Ton Y=1000 1250/10000 Positioning precision: +/-0,05 mm Opening of clamps standard: 11 mm Max stroke punching with 20 mm distance: 250 1/min Max stroke nibbling with 1 mm distance: 550 1/min Sheet thickness: 0,6 - 7 mm Max sheet thickness with standard clamps: 11 mm Max weight of working piece at reduced axis speed: 150 kg USB connections: 6 Connected load: 7,5 kW Multi-tool 6 places Autoindex station Automatic lubrication of multi-tool and single tools Programmable adjustment of stroke Hydr. clamping manual positioning 2 clampings standard Movable panel Machine software TOP punch

Durma PP 1250x30 CNC Punching Machine Maximum steel thickness : 6 mm Stroke : 30 mm Number of stroke per minute : 600 Max X axis 2000 mm movement+Automatic reposition Mad Y axis movement (MUTLITOOL) 1250 mm Metalix control Table size 2400 x 3600 mm Metalix program Many tools are included Machine is in very good condition

refurp-up in 2007 Spare parts Still in operation: Yes Available: immediately

Extension / distance slide center to frame: 320 mm Sheet thickness / sheet thickness: 3.2 mm Cutting surface / cutting capacity: 1600 mmx2 Distance table pestle/ distance table slide: 417 mm Stroke adjustment / adjustment of stroke: 16...125 mm Stroke number/ number of strokes: 45 / min Pestle adjustable/adjustment of slide: 80 mm Table size / surface of bed: 800 x 630 mm Bumper size / surface of ram: 500 x 400 mm Slope of the stand / inclination of coulmn: 25 Power of main motor power: 4 kW Weight: 2.5 Specification: C-frame punching press, used

<br><br><br>Still in operation: Yes<br>Available: immediately

overhauled in 2007 spare parts Still in operation: Yes Available: sofort

Standard equipment; Ready

for manual cutting of punched oil carton stencils, with autom. Cardboard feed, font size 7/8inch = 22 mm with the letters of the alphabet, numbers and all common Punctuation.

manual production of punched oil carton stencils, with autom. Cardboard feed, with large handwheel for simple operation, with the letters of the alphabet, numbers and all common punctuation marks Font size 1/2 inch = 13 mm

Eccentric C stand press, little used C frame - eccentric press, used Type: PED 63.3 S4 manufacturer: WMW Year of construction: 1994 Pressing power / rated pressure: 63 t Sheet thickness / material thickn. 3.2 mm Table size / surface of bed: 800 x 580 mm Hole in the table / hole in table: 300 mm diameter. Stroke / stroke of slide: 8... 120 mm Number / number of strokes: 56 / 90 / min Tappet adjustment / adjustment of slide: 70 mm The maximum distance between Table and plunger / max distance between table and slide: 560 m Projection / Cap: mm Power of main motor / power of main motor: 6 kW Weight / weight: 5.5 t

The turret press AMADA EUROPE 245 was produced in 2000 (machine installation: 2001). The price of the machine includes: installation and training in the use of the machine Punching machine technical data: - CNC control: FANUC 18 i-P - working time: 35,000 h - pressure: 20 t - work table: X = 600, Y = 400 - maximum punching format without intercept and with 31 stations head: 1020 x 1290 (Y-10; Y1010 T2XX; Y-50; Y970 T3XX) - maximum size of a punched sheet with an intercept: 1020 x 2540 mm - maximum size of the sheet to be punched with the intercept + 1 revolution (optional): 1500 x 2540 mm - maximum sheet thickness on the ball table: 6 mm - maximum sheet thickness on the brush table: 3 mm - maximum allowable weight on the table: 100 kg - punching accuracy: + -0.1 mm - positioning accuracy: + -0.07 mm - number of pneumatic clamps / grips: 2 - number of axes controlled s ...

Pneumatic marking press stroke length: 150 mm Maximum pressure capacity: 8 bar Movement stage: 420 x 750 mm Between posts: 650 mm Connection: Pneumatic Dimensions Lxwxh: 85 x 100 x 170 cm Machine weight: 300 kg

; ready for immediate use

Hydraulic punching and cut-out machine Indumasch punching force max.: 40 t Blechstaerke max.: 10 mm Stroke number: 150 p / min Punch ing diameter max.: 105 mm working area in transverse direction = x: 1000 mm working area in the direction of loading = y: 750 mm Position accuracy: 0.1 mm Total weight with table approx.: 3500 kg incl. Zubehoer under the river to visit; ready for immediate use

pressure: 110 t : Ø 40x20 mm throat: 500 mm engine output: 9 kW no. of strokes: 28 Hub/min stroke max.: 80 mm weight: 3150 kg Accessories / equipment: - punching table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Schuler PE4s 50/800 High Speed Press Manufacturer: Schuler Type: PE4s 50/800 High-speed press 61/21 600/3 Pressing force: 50 t Projection: 800 mm Stroke rate /min: 125-300 Plunger stroke: 40 mm Kohler unwinding reel 500.1 M We sell a large number of paternosters. The devices are in operation until 30.06.2021. After the purchase, there are also the documents for it From 01.07.21 the devices are ready for collection. Dismantling and transport by the buyer. Location is Hildesheim The dismantling, loading, as well as transport can alternatively be offered by us. In addition to about 50 paternosters, countless other machines are available. After purchase, the amount is due within 7 working days. Please also note our other offers. Have fun browsing and buying.

With the universal hand punch NPR-20 can both on the front page as also Center of the punch be punched, so may here A4 sheet at any point are processed. The punch is suitable for cutting of printed materials in the Office, in the printer or in the copy shop. With a Nutmesser can A4 sheets are grooved. The NPR-20 is suitable for all cutting work, which can be with the NPR-10 through out. A countertop if necessary Additionally facilitates the stamping work

With the universal hole punch NPR-20 can both on the front page as also Center of the punch be punched, so may here A4 sheet at any point are processed. The punch is suitable for cutting of printed materials in the Office, in the printer or in the copy shop. With a Nutmesser can A4 sheets are grooved. The NPR-20 is suitable for all cutting work, which can be with the NPR-10 through out. A countertop if necessary Additionally facilitates the stamping work.

Equipment: 5 Sledge units 1 Two-point excenter press 70 kN working range: Drahstaerke range: max. 3.0 mm width: max. 40 mm feed load: max. 170 mm power: max. 250 rpm; ready to use

Punching and forming center in chain with an assembly line for the production of relays, see pictures

Printing capacity max. 300 t, table 1500 x 1000 mm, stroke max. 500 mm