punching machines 1250 used for sale

Make : Ilpra Model : FS 5000 Year of Manufacture : 1996 Cup Size : 95mm Volume : 100 ml to 450ml Capacity : 4000 pcs per hour Voltage : 3 phase / 50Hz Air : 6 Bar HEPA Filter CIP Out Feed Conveyor Condition : Very Good Available : Immediately Previous Use : Yoghurt and Deserts Filling

Robust, high-quality beading and flanging machine with electric motor drive, optionally available with hydraulic bending roller delivery - optionally available with circular cutting device Largest sheet thickness, which is malleable - 3 mm steel sheet/ST40, maximum extension 450 mm, maximum distance between the top and lower roller 100 mm, two working speeds 6 and 33 rpm - available at additional cost with infinitely adjustable working speed and frequency converter, Time relay for limiting the working cycle, possible round diameter when using the circular cutting device between 300 mm and 1,200 mm (optional up to 1,620 mm), cutting power with the shear blades 3 mm steel sheet/ST40, drive power 1.8 kW – drive power hydraulics 1.5 kW, weight of the base machine 570 kg

Spiral kneader Diosna SP 200 D Mobile for max. 125kg flour or for max. 200kg dough with 2 timers automatic Spiral and boiler made of stainless material Boiler diameter Boiler contents approx. Machine movable on wheels with a steering roller Locking by 2 fixing digits with plastic flour dust cover Vat and kneading tool made of stainless steel 400 volt frequency 50 Hz Weight of the machine approx. Condition "good"

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 1 kW 17030 rpm at 300 Hz -Voltage: 165 volts -Acquisition shaft: Ø 20 mm -Tool: mm -Dimensions: 280/60/H110 mm -Weight: 4.3 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 0.4 kW 11300 rpm at 200 Hz -Voltage: 133 volts -Acquisition shaft: Ø 20 mm -Tool: mm -Dimensions: 250/80/H170 mm -Weight: 4.7 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 0.15 kW 11160 rpm at 200 Hz -Voltage: 133 volts -Take shaft: Ø 15 mm -Tool: mm -Dimensions: 190/70/H85 mm -Weight: 1.8 kg

Robust, high-quality round sheet bending machine for already profiled workpieces (sheet blades) - with motor drive at the bottom and top adjustable workpiece width between 300 mm and 800 mm, largest sheet thicknesses which can be bent round copper / titanium zinc / aluminium 0.8 mm - galvanized steel sheet 0.7 mm - stainless steel sheet 0.5 mm, smallest possible bending radius 350 mm - bending radius depending on the yield strength - smallest bending radius galvanized steel plate 0.7 mm - 1,000 mm, continuous speed infinitely adjustable 1 to 6 m/min, drive capacity 2 x 0.75 kW, weight 375 kg

CNC - controlled electromotor precision sheet cutting machine (swing bending machine) with automatic bending angle monitoring 15" touchscreen with graphics - selector switch for one- or two-person operation, maximum bending length 3,100 mm, maximum sheet thickness ST42 - 1.5 mm, upper cheek angle 160° - upper cheek stroke range up to 160 mm, Rear stop with 12 foldable stop fingers - stop range 12 to 750 mm (optional 1,000 mm or 1,500 mm) - travel speed adjustable - up to 500 mm/sec, working height approx. 830 mm, drive power 3 kW, dimensions approx. 4.3 x 1.8 m x 1.65 m, weight 2,700 kg

CNC - controlled electromotor precision sheet cutting machine (swing bending machine) with automatic bending angle monitoring 15" touchscreen with graphics - selector switch for one- or two-person operation, maximum bending length 3,100 mm, maximum sheet thickness ST42 - 3 mm, upper cheek angle 160°/140° - upper cheek stroke range up to 240 mm, Rear stop with 12 foldable stop fingers - stop range 12 to 750 mm (optional 1,000 mm or 1,500 mm) - travel speed adjustable - up to 500 mm/sec, working height approx. 830 mm, drive power 9 kW, dimensions approx. 4.6 x 1.8 m (depending on rear stop) x 1.9 m, weight 3,800 kg

CNC - controlled electro-hydraulic precision long-bending machine (swing bending machine) with automatic bending angle monitoring 15" touchscreen with graphics - selector switch for one- or two-person operation, maximum bending length 6,050 mm, extension 1,250 mm, maximum sheet thickness ST42 - 3 mm, maximum bending angle 135° - upper cheek opening range up to 200 mm, rear stop with foldable stop fingers - stop range 12 to 1,200 mm - inclination up to 40° - travel speed adjustable up to 500 mm/sec, working height approx. 830 mm, drive power 7.5 kW, dimensions approx. 6.4 x 1.8 m x 1.5 m, weight approx. 8,500 kg

Conventional or NC - controlled heavy electrohydraulic sheet metal bending machine (swing bending machine) of excellent quality Largest bending length 2,540 mm, vertical particularly stiff upper cheek - largest bending angle 100° - electric motor bending cheek drive (one motor left + right each) - hydraulic upper cheek movement with synchronisation control - largest opening width 230 mm, Working table height 870 mm, drive power hydraulics 4 kW - drive power bending cheek 2 x 1.5 kW, dimensions without rear stop 3.6 m x 1 m x H 2.15 m, weight without rear stop 4,300 kg

Manual cut-out shears of excellent quality, for the burr-free cutting of sheet metal up to 1.5 mm sheet thickness steel sheet/ST40 – aluminium 2 mm, backdrop-guided knife beam, shear length 150 x 150 mm, clink angle 90°, dimensions 460 x 500 x 810 mm, weight 75 kg

Robust, high-quality manual sheet metal bending machine (swing bending machine) Largest bending length 3,080 mm, highest bending performance over the entire bending length - steel sheet/ST40 - 1.2 mm - stainless steel sheet 0.6 mm - zinc sheets, copper sheets, aluminium sheets - 1.5 mm, largest opening width of the upper cheek 68 mm, largest bending angle 160°, working height approx. 930 mm, dimensions 3.55 x 0.75 (without rear stop) x H 1.3 m, weight 930 kg Equipment: automatic opening of the upper cheek (patented) when lowering the bending cheek – two opening widths can be adjusted 15 mm and 65 mm, adjustable angle stop for repeat-accurate series bends, weight equalization of the bending cheek for easy machine operation, buttoned upper cheek to press folds. Optionally at an additional cost, the machines are equipped with a rear stop with 750 mm travel - as well as with a bead  ...

Semi-automatic machine Workpiece diameter 40-400 mm Max. workpiece length 2000 mm Spindle rotation frequency 16-1460 rpm Workpiece spindle speed 3-180 rpm Max. diameter of grinding: -In steady rest 120 mm -Without steady rest 360 mm Max. grinding length 1800 mm Height of centers above the table- 210 mm Max. work-piece weight- 1000 kg Grinding wheel dia min/max 500-750 mm Max. length of table travel- 1800 mm Spindle taper- Morze 6 Motor power: 13 kW Periodical feed of grinding headstock: -Max.: 0,030±0,0025 mm -Min.: 0,0025±0,0006 mm Max. axial travel of grinding headstock spindle: ±2,5 mm

Robust, high-quality beading and flanging machine with electromotor drive, hydraulic bending roller delivery and manual displacement of the stop plate Largest sheet thickness, which can be reshaped – 1.8 mm steel sheet/ST40, maximum extension 200 mm, maximum distance between the top and lower roller 30 mm, two working speeds 4 and 24 rpm – available at additional cost with infinitely adjustable working speed and frequency converter, time relay for limiting the working cycle, drive power 1.5 kW + 0.75 kW, weight 210 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 0.4 kW at 11300 rpm at 200 Hz -Voltage: 133 volts -Receiving shaft: Ø 20 mm -Tool: mm -Dimensions: 250/60/H130 mm -Weight: 3.8 kg

Robust, high-quality heavy beading and flanging machine with electric motor drive, electromotor bending roller delivery and electromotor displacement of the stop plate Largest sheet thickness that can be reshaped – 6 mm steel sheet/ST40, maximum extension 500 mm, maximum distance between the top and lower roller 48 mm, two working speeds 3 and 27 rpm – available at an additional cost with infinitely adjustable working speed and frequency converter, time relay for limiting the working cycle, drive power 3 kW + 0.75 kW, weight 1.150 kg

Demoor 825-320 oil country lathe. Distance between centers: 3000mm. Swing: 970mm. Swing in carriage: 700mm. Bore: 320mm. New electrical box. Carriage with cone copier. Equipped with chuck.

Number of drill units 7 Number of tapping units 4 Number of clamps 8

Pallet feeder – separating head Vaculift - Vacubelt 6 buckles Gate fold Compressor Without delivery

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -1x motor: 1.05 kW 18000 rpm at 300 Hz -Voltage: 165 volts -Take shaft: Ø 16 mm -Tool: Ø 70 x 25 mm -Dimensions: 285/60/H140 mm -Weight: 3.6 kg

Type: MUTIVAC R 530 Film type: flexible Bottom film width: 625 mm Top film width: 610 mm Cut-off length: 657 mm Pack sizes: 2.1 (2 pack.: 640 x 267 mm) Max.depth: 200 mm Vacuum pump: 250 m3/h Length: 8500 mm

TWO SPINDLE BORING MACHINE Sr. No.: 71179 Equipment / Additional information: Tools

The BATTENFELD BA 600 CDC injection molding machine was built in Austria in 2002. It is equipped with Unilog B4 control. It has a closing force of 600 kN forms. The screw diameter is 33 mm and the injection volume is 99 cm3. The machine has plates for mounting injection molds with dimensions of 511 x 511 mm, and the clearance between the columns is 320 x 320 mm. The injection molding machine is equipped with a receiving robot, hot runners, a conveyor belt for collecting moldings, four pillows, a string of cores and technical documentation. Technical parameters of the BATTENFELD BA 600 CDC injection molding machine – control: Unilog B4 – dimensions of tool plates: 511 x 511 mm – clearance between columns: 320 x 320 mm – tool height, min. : 150 mm – opening path: 511 mm – injection pressure: 2022 bar – injection volume: 99 cm3 – injection weight: 90 g – screw  ...

Unclinking machine, little used Notching machine , lessly used Type: VA 200/ 4 Built / yom: 1995 Manufacturer / make: KEMPFLE Table size: 1000 x 800 mm Power:/ capacity: 4 mm / for steel / steel 400 Nm/mm 3 mm for stainless steel 600Nm/mm Length of cutter blades: 205 mm Number of Strokes/ strokes: 60 per minute Cutting head/ cutter head: 30...135° (stepless) Weight / weight: 1.15 tons Connection value/ connected power: 4 kW

Technical data: - bending and rolling by hand, - max working width 1020 mm - max. material thickness St 40 1.25 mm - Bending angle adjustment via end stop 10 - 180 ° - max hub upper cheek approx. 85 mm - max. adjustable bending cheek 20 mm - Shaft diameter 55 mm - Upper shaft can be swivelled - Rear shaft parallel + obliquely adjustable - Space requirement approx. W 1500 x H 1400 x D 750 mm - Weight approx. 400 kg

Technical data: - Threaded drilling capacity approx. M 3 - M 16 - Speed range up to 500 rpm - Working range ( swivel radius ) 2500 mm - Tool quick change holder size 2 diameter 31 - various inserts for tool quick-change recording - Table area with 5 T-slots 2050 x 900 mm . Table height 910 mm - Machine vice with jaw width 200 mm - 3 jaw chuck 250 mm - Pneumatic connection with pressure reducer - mobile base - Space requirement approx. W 2400 x H 2000 x D 1000 mm - Weight approx. 1100 kg

Table clamping area: 290 x 1250 mm Table movement x: 800 mm Table movement y: 360 mm Table movement z: 450 mm Milling head pivotable: 90/45 ° Spindle holder: ISA 40 Spindle speeds: 56 - 4500 rpm Pinolene stroke: 125 mm Pinolene feeds: 0.035; 0,14; 0.7 mm/min Spindle drive: 1.8/2.4 kW Space requirement: 2000 x 1900 x 2300 mm Weight: 1700 kg

NEW column boring machine FLOTT SB 25 plus - Thread cutting device - Control panel with OLED display - LED lighting - Quickly adjustable and ergonomic drill depth stop - Stepless speed control via central knob - Thermal overload protection - Spindle stop - Drilling protection with electr. Hedge - Continuous/normal drilling capacity (mm): 23/25 - Thread cutting power (depending on the slope): M16x1 - Spindle: MK III - Drilling depth (mm): 115 - Extension (mm): 260 - Usable work surface (W x L) (mm): 420 x 340 - Table height adjustment with rack - Spindle speeds infinitely variable (1/min): 20 - 2000 - Dimensions (mm): 430 x 715 x 1800 3-year warranty for single-shift operation Further TECHNICAL DATA can be found in the product sheet! DELIVERY: free house incl. packaging NOT THE RIGHT MACHINE? WE ALSO OFFER OTHER FLOTT PRODUCTS - ASK FOR AN OFFER! FLOTT STUE ...

CNC Engraving Machine MÜLLER LCF - 2 Travel: X 375 mm Y 570 mm Z 90 mm Technical0.321020121002 Data: Table size 700 mm x 480 mm Weight: 50 kg Exterior dimensions: Length: 700 mm Width: 500 mm Height: 350 mm Accessories: Computer Screen Keyboard Mouse Software Control Kress cutter Vacuum pump Valve Spray Mist With this, versch. Collet and cutter - NEW

Merli Clovis 70 heavy lathe. Distance between centers: 8000mm. Swing: 1650mm. Swing in carriage: 1170mm. Bore: 206mm. Bed width: 1000mm. Speeds: 16.(3-300). Maximun weight without steady rest: 15.000Kgs. Maximun weight with 1 steady rest: 20.000Kgs. Equipped with chuck of 1400mm. Equipped with DRO. Equipped with 2 steady rest. Equipped with CE protections and CE certificate for second hand machines.

- Manufacturer: Bekum - Machine type: 506D - Stations/Stations: Double Station /doublestation - Clamping Force: 170 kN - Built: 2003-Retrofit in 2021 by UES - Location/ Location: UES warehouse / UES warehouse - Control type/ Control system: New B&R control by UES/ New B&R Control by UES - WBK / Parison control: 100 points /100 points WBK - Extruder | Extruder: Grooved barrel extruder S 100/24D - Hose head/ Parison head: On request / on request - Shape dimensions mm/ Mold dimensions mm (A length/length x W width/ width x C depth /depth): 550/500/2150 - Bottle volume Max./ Bottle volume max.: 15/ 20 lit. - Screen language / Monitor language: English/ German - Accessories/ Accessories: On request - Weight/Weight (kg): 12000 - Price /Price: On request / on request

Pasta and automatic machine Fortuna head machine KM 4 used Fortuna head machine KM4, 4-row with flour. Easy cleaning of the parts because easily accessible. Capacity up to max. 4800 pieces/hr weight range of the head machine between 35-80 grams. Divide and act of dough as if by hand. Payment and shipping on request. 4-row Weight range 35-80 grams Hourly capacity max. 4800 pcs. Flour spreader mobile on wheels

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Manufacturer: Haffner, milling motor type M 30 -Power: 300 W 17000 rpm -Voltage: 200 V 300 Hz -Dimensions: 240/70/90 mm -Weight: 2.5 kg

TECHNICAL DATA: Working area 3,000 x 1,500 x 115 mm Control Siemens Sinumerik 840 D Laser power 5,000 watts Max. sheet thickness structural steel 25 mm Max sheet thickness stainless steel 20 mm Max sheet thickness aluminium 12 mm Machine regularly serviced by TRUMPF! Standard: - Closed machine frame with integrated laser unit - TRUMPF laser TLF 5000 - Laser unit: CO2 laser, high-frequency excited, maintenance-free turboradial blower, cooling unit, logbook function - Automatic pallet changer and longitudinal conveyor belt - Drives: Gantry drive in combination with linear direct drives - Laser power control - Position laser diode - HI-LAS high-pressure cutting - Plasma sensor inges, PMS - Automatic sheet metal edge detection - Programmable performance cycles - Microweld - Automatic nozzle cleaning - Fast editing with SprintLas - ContourLas for making small ho ...

Machine code: IT352 Manufacturer: Uhlmann Model: UPS300 Year of construction: 2001 Uhlmann This is a fully automatic, intermittent motion Blisterpacking machine with a capacity up to 50 cycles per minute. The maximum output is 200 Blisters per minute depending on blister size. The machine is of ‘balcony construction’ - all relevant stations are individual modules, which are cantilevered off a large aluminium plate that forms the front of the machine housing. The remainder of the machine cabinet is constructed from fabricated steel and houses the drive unit, gear trains, chain drives and the electrical control equipment. PVC, PVC/PVDC, PVC/Aclar film is drawn from a reel and is first heated and softened and then deep-drawn in the blister forming station. The blisters are formed in the mould with the aid of compressed air – the web is then pulled forward, up and across  ...

Unwind Stand Preheater ILLIG VHW 72/ 2 ILLIG RDM 70K (refurbished in 2003) Thermoformer with auto-start facility Indramat Servomotor Indexing Top & Lower heaters Auto Transport Rail Spreading for PP Sheet Sag Control Max. Forming Area 680 x 280 mm Pneumatic Plug Assist, Max. Part height 125 mm Control Cabinet with Optimised Schleicher (PLC) Controls Auto Lubrication Pump. Inline ILLIG ÜG70B Counter/ Stacker, with delivery conveyor Inline Grinder & Blower

Slicer WABÄMA: knives thickness 9 mm, new knives; power 0.5 kW/380V semi-automatic lubrication; automatic adjustment of the height at the upper plate of bread;

power of 1.1 kW / 2,9A / 380V / 50Hz; the weight of a piece of 500 - 1200 g; productivity up to 1200 pcs / h; weight approx 280kg.

Diosna SPV 240 AF/T - Spiralkneter mit 2 kessel auf frage moglich mehr kessel - Bottichwandabstreifer mit Temperaturfühler - sterung mit program speichren - sehr leiser Betrieb - Maschine wie neu

Used spiral kneader with extendable tank car BOKU, type: SK 160 -bakery condition - 2 pieces of kneader and 4 pcs. boiler available - for 160 kg dough or 100 kg flour - Kneading arms interchangeable - Condition good, ready for immediate use The company DIOSNA has taken over the area of BOKU. BOKU dough kneaders are still made. THE service and spare parts offer DIOSNA. Sightseeing and test run are possible by arrangement.

New drive shafts for Vertical and Universal Fraeshead FU 400 - FW 400 HECKERT Germany Price 900,-- Euro per square plus VAT

Used spiral kneader KEMPER, type: ST 30 -Completely overhauled- - for 30 kg flour or 48 kg dough - technical condition: very good - completely overhauled - 6 months warranty Confession and test run are possible by arrangement.

Series No. 50871101, Flatepile Feeder, 4 Pockets, Delivery

Reconditioned Hotmelt Slot Nozzle machine for coating and laminating of various substrates. Winding/Unwinding on request. Overhauled, new Hotmelt slot nozzles - coating and laminating system. Up- and downwinding systems on request.

3000 x 1500mm 4000w With Bytrans Extended loading/Unloading

Reconditioned powder scatter coating and laminating line for thermoplastic powders. Working width 2 x 000 mm. New powder-spreading system for coating and lamination by means of thermoplastic powders. Working width 2 x 000 mm.

High performance column boring machine Technical data: - Drilling capacity in steel ST 60 32 mm - Thread cutting device up to M 20 - Drilling spindle holder MK 3 - Feeds 0.1 + 0.2 + 0.3 mm/U - Drilling spindle stroke 150 mm - 12 drilling spindle speeds 80 - 1400 rpm - Extension 280 mm - max distance table - drilling spindle 760 mm - Table with 2 T-slots 550 x 400 mm - Height adjustable via rack with hand crank - Drive 400 V / 1.4 / 2.3 kW - Space requirement approx. W 550 x H 1950 x D 850 mm - Weight approx. 360 kg - with: - coolant device - Quick-release drilling chuck - 20 pcs. HSS div. Drill 8 - 25 mm

Peak height: 160 mm Tip width: 1500 mm Grinding wheel dimensions: 500 x 127 x 40 mm Grinding wheel speeds: 1570/2050 rpm electr. Connection: 380 V kW Space requirement: 4400/6400 x 2000 x 1400 mm Weight: approx. 4000 kg

for bill of exchange order unit