136,736 used machines on RESALE, but how to find them? Machine Search
KIMLA BPF 2030 CNC router was built in 2011 in Poland by POLCOM Przemysław Kimla. The machine was regularly maintained throughout its service life. In 2021, the ISEL 10 bearings along with the lead screw in the Z axis were replaced. KIMLA BPF 2030 is an excellent choice for both small and medium-sized companies with a diverse production profile. The machine enables precise machining of a wide range of materials, i.e. light metals, plastics and wood. After fitting a special cutting head, it is also possible to cut parts made of rubber and cardboard. All machining processes are performed on a large work table with an ergonomic design. The spindle, driven by a high-powered motor, rotates at a maximum speed of 24000 rpm and moves in three X,Y,Z axes with feeds of 2000 mm, 3000 mm and 500 mm respectively. Tools taken from a 10-position magazine are in turn continuously measured and calibr ...
SHARK 281, manual band sawing machine to cut from 0° to 60° left. A FEW FEATURES: Electric panel (wiring totally identifiable, stand-by, loose-key safety switch, main switch, pole change switch, emergency stop, motor magneto-thermal overload, minimum tension coil, protection against missing phase, low tension safety device (LTSD 24 V).- IP55 control handle. BEST PRICES FOR ALL MEP MACHINES IN EUROPE! ASK FOR A QUOTE
Key data: 1600 mm, 3500 mm, 800 mm
For sale is: 1 Piece Used Face and Lace Lathe Manufacturer: Werkzeugmaschinenfabrik Zerbst GmbH Type: DP1 / S3 x 3500 Year of manufacture: 1994 Technical data: Largest turning diameter over bed: 1,600mm Center width: 3,500mm Spindle bore: 100mm Face plate diameter: 1,250mm Total mass of the machine: approx. 24.8t incl. documentation Further pictures and videos can be sent on request. The following things have been renewed/repaired on the machine in the last four years: At the end of 2022, the tailstock was completely overhauled. New bearing and new tip and lubrication. 2024 Cross Support regenerated. Refurbishment of the wedge strips with new sliding coating, snatchers on the guideways smoothed by scraping, Bearing seats of the spindles made smooth, wedge strips in the contact surface and covering surface scraped. Lubrication pump cle ...
COBRA 352 SX evo, semi-automatic electropneumatic sawing machine to cut aluminium and light alloys using blade with electrowelded hardmetal plates (HM). The machine cuts from 45° right to 45° left and the head tilts from 0° to 45° left so as to make inclined cuts. Sawing machine with controlled single axis microprocessor with the latest generation of controllers for semi-automatic sawing machines designed by MEP. OPERATION: Starting the cycle by means of the relative push-button the following steps are carried out: – the vice closes and the motor starts – the head goes down to execute cut – motor stops – head returns to top position and vice opens. BEST PRICES IN EUROPE FOR MEP MACHINES! ASK FOR A QUOTE
Control CC 100 for ENGEL injection moulding machines
Used 4 flanges fit on a JUNG, HF 50 (R or RD) Scope according to pictures ! ( 4 flanges , . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CNC controller: Fanuc 18i-TB Capacity X-axis travel mm: 157,5 Y-axis travel mm: 35 Z-axis travel mm: 464.8 B-axis travel mm: 600 C-axis: 360º (0,001º) Turning length mm: 399 Max. turning diameter mm: ø: 190 Distance between spindle centers mm: 750 Bar work capacity mm: 52 Upper turret Number of tool slots St .: 12 Speed driven tools RPM: 6.000 Drive power driven tools kW: 5.5 / 3.7 Number of upper turrets: 1 Lower turret Number of tool slots St .: 12 Speed driven tools RPM: 6.000 Drive power driven tools kW: 5.5 / 3.7 Milling function: Both Turrets Main spindle Speed spindle rpm: 5.000 Counter spindle Speed spindle rpm: 4.500 Drive power spindle kW: 11 / 7.5 Equipment Chip conveyor Part catcher Workarea light Bar Loader RBK 10016 Working time hours Potencial nominal kVA: 67,2 Basic machine dimensions / weight Length mm: 3.675 Width mm: 2.258 Height ...
Spreading attachment PIETSCH STA 1.7 MW series 2000, capacity 1.7 m3, conveyor belt, tarpaulin folding roof, spreader rubber, drive via vehicle hydraulics, with remote control and support supports. Sale as is or in parts possible.
3000 x 1500mm / 5000w / Siemens 840 - Single Head Technology
Top and bottom case sealing / taping machine with average production output up to 1000 boxes per hour / 16 boxes per minute and box transfer speed: ·~22 mt/min ~22 mt/min; side mounted drive arms; handwheel for adjusting height. Comes with outfeed roller conveyor. Suitable for cardboard boxes and cases of following sizes: L: 150mm (min) - max (not set) W: 100mm (min) – 500mm (max) H: 100mm (min) – 500mm (max) Tape width: 25mm to 50mm (max), max foil roll DIA: 360mm, reel DIA: 76mm, fitted with Emergency Stop button. Year: 2011 Machine is in excellent overall condition with little use – originates from and established Pharma production site in Europe. Size: L: 1.800mm x W: 1.200mm x H: 1.600mm; W/T: 300kg; comes with stainless steel roller conveyor (machine size: euro-pallet x H: 1.500mm, W/T: 40kg);
CNC fine lathe Make: PetrolGer Type: TNL Control: Siemens 810T Built: 1991 Equipment and accessories: - Swivel loader system - Small conveyor belt - Charging-unloading gripper - Chip conveyors - Foot lever for clamping and relaxing the collet
IMA BFB MS300A collator and stretch bander for cartons Carton Size range: minimum 65 x 20 x 12 mm, max. 160 x 95 x 95 mm Bundle size range: minimum 65 x 80 x 30 mm, max. 180 x 320 x 160-210 mm (push-in width x depth x height) Maximum reel diameter 300mm, reel core diameter 70-76mm Includes discharge rake to remove bundles from the machine (prevents heating the product) Siemens S7-300 PLC with UniOP HMI Capacity up to 40 bundles per minute 6 bar compressed air Footprint 2865 x 1265mm approx. x 1945mm high Weight approx 1500kg.
Offer via gebr. Suhner Shaft Grinding Machine Rotofera DKM 4 Flexible shaft machine shaft grinding machine grinding Rotofera The 7-speed transmission Speed range: 850, 1600, 2100, 3200, 5700, 8000 and 12000 min-1 (400 V, 50 Hz, 3 Ph, 1.0 kW) Mobile Continuous - Separation of motor and tool guaranteed fatigue-free working Applications - Grinding - Disconnect - Roughing - Milling - De-rusting - Polishing - Brushes For light work, especially stainless steel, boiler and steel construction, polishing workshops, apparatus construction, kitchenand hospital supplies, etc.
Siemens Small X-ray / Intraoral Device Heliodent MD with tube SR 60/70/7 0.7 • Before takeover, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in the "IST" state from the freiberg (EXW), Saxony, Germany, and prepayment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite being fully functional without warranty. • The installation and configuration of the system or parts must be carried out by a specialist or technician authorized by the manufacturer! • The offer is subject to interim sale.
Used spiral kneader KEMPER, type: ST 75 A -Refurbished - for 120 kg of dough or 75 kg flour - incl. 2 extendable tank wagons - Condition: Very good, ready for immediate use - 6 months warranty Sightseeing and test run are possible by arrangement.
SCM TECH Z5 5200 CNC woodworking center was built in 2015 in Italy by SCM Group S.p.a. This extremely efficient machine is used for precision machining of wood and wood-based materials (chipboard, plywood, etc.). It enables a number of complex operations to be performed, such as vertical drilling, horizontal drilling, grooving with a saw blade along the X axis and standard milling. The machining process is performed in 5 axes by means of a work head located inside a movable machining station. It consists of a boring head with vertical/horizontal spindles and integrated blade and electro-spindle with automatic tool exchange system. The machining station moves over a work table with suction cups that ensure secure holding of the workpiece during machining. On the inner base of the work table, in turn, there is a device designed for easy shavings removal. Each axis is driven by high-powe ...
Key data: 130 mm, 160 mm, 6000 1/min
CNC lathe ARIX / HUMMER T-42CL + bar loading magazine Robust Nitro + chip conveyor – year of construction 2025 For sale is a modern CNC lathe of the type HUMMER T-42CL (ARIX CNC Machines) including bar loading magazine Robust Nitro. The machine was built in 2025, is in very good condition and is ideal for cost-effective series production. Technical data: Model No.: T-42CL Manufacturer: ARIX CNC Machines (Taiwan) Year of Make: 2025 Spindle speed: up to 6,000 rpm Bar Passage: 42 mm Max. turning diameter: approx. 130 mm Max. turning length: approx. 160 mm Axles: X: 225 mm Z: 235 mm Y: 385 mm Main spindle: Power: 7.5 kW Collet holder: A2-5 Tool Stations: 5 lathe tools + 4 driven tools Total: 8 Lots Machine weight: approx. 3,300 – 3,500 kg Equipment: Bar loading magazine Robust Nitro (automatic material feeding) Live Tooling Suitable for series production ...
1 VIRGINO RIMOLDI roll slitting machine type TMF RN160AV. Machine used to obtain tapes of different widths, whether the fabric is wrapped "in line" or on the bias. Cutting system with motorized disc blade and manual feed. The fabric roll is supported by a shaft that enters the cardboard tube where the fabric is rolled on. The shaft is motorized and its rotation is synchronized with that of the disc blade, ensuring a clean and precise cut. Device for sharpening the disc blade. Width of the strips to cut: from 20 to 130 mm. Maximum width of the fabric roll: 1,600 mm. Maximum cutting diameter 230 mm. Diameter of the roll holder bar: 45 mm (for carton tubes of inside diameter 46 mm and outside diameter 50 mm).
Circular saw sharpening machine Vollmer Cne
TECHNICAL DATA: Working width mm: 400 Workpiece length min mm: 350 Thickness mm: 150 No 2 brushing units (Turnable) Total connection kW: 1,83 Weight Kg: 1200
Table version for small cartons Label from above Dimensions: 1,100 x 600 x 600 mm high
Huller thread cutting machine vith hydraulic vice. Thread head from M3 up to M27 Machine is perfect for serial work.
TECHNICAL DATA: Working width mm: 1600 No 2 side brushes Lengthwise brushing unit Horizontal brush Horizontal brush Brush roller (transversal) Weight Kg: 2500 Total power installed kW: 11
Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 0.15/0.22 kW 11160/17250 rpm at 133/200 V/200/300 Hz -Shaft holder: Ø 15 x 15 mm -Dimensions: 190/70/H95 mm -Weight: 1.8 kg
Fliss bohrer and thread rolling NC machine. Machine was rebuilded in 2019, complete Hardwere, and pneumatic components, and part from electric. Machine can be used for serial tube production, can be aded Robot for manipulating. Machine will be able to connect with a handling robot for fast delivery and high productiion.
REALMECA MINI C3X-CNC VERTICAL 1 phase machining milling machine Used for teaching begginers. Perfect condition
MAHO MH-700 with numeric control X, Y Table size: 800x300 Working area: X-450,Y-250,Z-300 Spindle taper: MK3 Feed range: 7-250mm/min Vertical head swiveling 90 degreess Power: 3KW Dimensions: 1300x1200x1700
BLISTER PACAGE FORMING MACHINE LIMPIR Machine is in perfect working condition We use machine durring production of switch production paccaging switches.
MACHINE IS IN GOOD WORKING CONDITION Machine need center horse and support for the clamp cutting tools. Bj0ie7dcoa Machine Has ben used in Switzerland, after thay realize they need that both suports, they took it off and use on other lathe.
Pacage set of REHM TIG WELDING MACHINE Welding torch 10m welding gun covers 3 different sizes look photos Suitcase for the complete set included Gun for electrode mma welding
Automatic double copy milling machine - longitudinal copy milling machine Manufacturer: Wigo Model: 1075 Working length: Workpiece with straight end faces .. 1300mm Wersktück with rounded end faces .. 1000mm Working width: max. 200mm Working height: max. 130mm Feed continuously 0.5 - 12 m/min Milling units: 2 x 4 KW Hydraulic unit: 1.1 KW Additional 2 milling unit on the right side. Clamping cylinder pneumatic: 2 pcs.
In-line drilling rigs with 8 pieces of drilling spindles for the processing of easily machinable materials such as wood - aluminium - non-ferrous metals, composite materials and various plastics. Each of the drilling units produces 450 watts. Infinitely adjustable drilling feed speed Infinitely adjustable drilling depth and return path of the drilling unit. Slanted holes in the range +/- 30°. Pneumatic workpiece tension Table size 3,000 x 800 mm (optionally larger) Working height approx. 870 mm. Horizontal adjustment of the drilling units 240 mm. Vertical adjustment of the drilling units 320 mm. Dimensions 3 x 1.25 x H 1.98 m Weight approx. 1,000 kg
In-line drilling rigs with 8 pieces of drilling spindles for the processing of easily machinable materials such as wood - aluminium - non-ferrous metals, composite materials and various plastics. Each of the drilling units produces 450 watts. Infinitely adjustable drilling feed speed Infinitely adjustable drilling depth and return path of the drilling unit. Slanted holes in the range +/- 30°. Pneumatic workpiece tension Table size 3,000 x 800 mm (optionally larger) Working height approx. 870 mm. Horizontal adjustment of the drilling units 240 mm. Vertical adjustment of the drilling units 320 mm. Dimensions 3 x 1.25 x H 1.98 m Weight approx. 1,000 kg
BOSCH Type KLD 1041 Leak Test Machine for Ampoules and Vials Leak test machine for glass containers. Linear automatic machine for the inspection of ampoules, injection cylinders/cartridges and injection bottles/vials, which checks each container at four inspection points by means of high-voltage technology. The testing principle is based on the detection of the changing impedance of a container filled with an electrically conducting liquid. The containers are examined for: hairline fissures and pinholes ; insufficient glass wall thickness/tip domes too thin ; capillary pores ; leaking fusion points, sealing points and ampoule neck tips ; absence of fill. MAIN FEATURES: It is recommended to carry out the container leaktightness test directly after sterilization or fusing. The unit is equipped with: conveyor system, infeed belt, 4 high-voltage inspection stations (1-2 check bodies and ...
Double end profiler, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 7.5 kW -Speed: 2860 rpm -Voltage: 380 V -Shaft holder: Ø 40/80 mm -Price: per piece -Number: 2 pieces -Dimensions: 675/250/H255 mm -Weight: 98 kg
Kramatorsk KJ 1910 10-meter boring depth - Heavy duty: 25-ton workpiece >>> NOTE: MACHINE IS IN OUR WAREHOUSE IN ITALY < < < Heavy duty: Max. work-piece weight 25 tons Spindle motor kW 85 Counter rotation motor 90kW Spindle hole diameter mm 700 Max. boring diameter, mm 600 Center height over the bed, mm 670 Max. work piece external diameter, mm 1300 Work piece length range on one-sided machining, mm 1000...10000 Work piece diameter range, mm: - in chuck of faceplate 200...1100 - in open rest 400...900 - in closed rest 200...630 - in round rest 250...550 Spindle speeds range, rpm 2...200 Machine overall dimensions, approx mtrs 31 x 3 x 2,3 Machine weight, kg 90000 (approx)
The PEWOPACK 450 is an electronically/pneumatically controlled tightening barrier insulating machine for the production of single and multi-piece containers. It pops up the products in boxes and welds them into a thermal foil. Power max:60 boxes/min Slide type: PE Ptsegq Film width 50 - 450 mm Film thickness 0.025-0.100 mm Roll diameter max. 300 mm
Used riser A+F AUTOMATION - Trays with round inlet - with NORDSON glue device Sightseeing and test run are possible by arrangement.
Band saw Saw machine Brand: HESKA Type: ESU-H63 S/N 793322 Infinitely adjustable 16-3200 m/min Hydraulic feed table with approx. 410 mm stroke, to the right approx. 45° and to the left approx. 15° inclined Band length: 4700 mm Operating instructions are available. Sold only to commercial enterprises! All information without guarantee
Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Circular saw motor in: flat design -Motor: 1.85 kW 2870 rpm at 50 Hz -Shaft holder: Ø 30 mm -Number: 2x motors available -Price: per piece -Dimensions: 390/120/H185 mm -Weight: 15 kg
Spiral kneader Kemper SP 150 AL with 2 boilers Kemper Spiral Kneader Type: SP 150 AL with automatic boiler locking 2 Automatic timertimer 2 speeds for max. 150kg flour / max. 240kg dough with flour dust cover with 2 boilers Stainless steel boiler and spiral
TECHNICAL DATA: Textile machine Dimensions mm: 3000 x 1800 x 2180 Installed power KW: 3 Weight Kg: 350
Bridgeport EZ Path S Used machine (very good) Control type Cnc Built 2001 Hours K.a. Price 12,500 € net plus VAT Dimensions 3100x1850x1500 Weight 2500 kg Location Haiger Description Universal CNC cycle deer of the brand Bridgeport suitable for tooling, fixture construction, training as well as mold making • Circulation diameter: 430mm • Control: Fanuc 20T Technical data • Circulation diameter 430mm • Peak width 1000mm • Control Siemens Fanuc 20 T • Reitstock MK 4 • Multifix tool station • Speed 1-4000rpm • Connection 380V - 7.5 KW
maximum number of results exceeded
please refine your search
