punching machines 1250 used for sale

Year 1996, CE norm, complete instructions, control Delem, machine in TOP condition with warranty, more details on request

Punching machine EDEL - Maximum power: 25to. - Extension 26 cm - Height: 170cm - Width: 65cm - Depth: 50cm Good condition fully functional can be visited and tried out on site. Shipping abroad. Visit: Basically, I would like to point out to you that in order to avoid misunderstandings, the article can be viewed before purchase and tested under electricity. Please ask questions before purchasing to avoid any ambiguity. If you have any general questions or make an appointment for a visit, I can be reached at any time, using the telephone number below or above. Errors in the description and intermediate sale reserved. The VAT is shown separately on my invoices. Shipping with forwarding.

1 LABEL DIE CUTTING MACHINE PMC MODEL F -Year of manufacture 1990 -Four-sided guiding system jogs and holds the stacks on all four sides during the die cutting operation for precise die cutting. -Full control of stacks through feeding, guiding and die cutting eliminates manual jogging. -Convenient adjustment of guides and die with clear view of die register on labels speeds set-up and reduces waste. -Labels are safely loaded outside die cutting area. -Typical uses: labels, note pads, credit cards, identification tags, postal cards, game cards, 3-way trim, round cornering. -Materials: paper, plastic, vinyl, Mylar, paperboard Specifications Model F: Maximum Pre-cut Size 184mm x 184mm(7.25” x 7.25”) Minimum Pre-cut Size 32mm x 32mm(1.25” x 1.25”) Maximum Die Cut Size 178mm x 178mm(7” x 7”) Minimum Die Cut Size 25mm x 25mm(1” x 1”) Recommended Tri ...

: : : : Table load:                   200Kg Working area X Axis:          2.535mm Working area Y Axis:          1.280mm Punching force:               22T Maximum sheet thickness:      8mm Turret position:              18 Positioning speed X and Y Axis:90000 / 60000 mm/min. Change speed revolver:        1,5 - 5 Rpm Length:                       6.900 mm  Width:                        5.800 mm  Height:                       2.200 mm  Weight:          &nbs ...

Maximum punching format: 730 x 1040 mm Max pressure: 300 tons Thickness: 0.1-2 mm Punching accuracy: ± 0.1 mm Maximum Investor pallet height: 1280 mm Maximum speed: 7,500 sheets / hour Machine weight: 15,000 kg Dimensions: Width length 260 cm height 582 x 386,5 x Power: 16 kw

Capacity: 30 t Number of strokes per/min: 0   Day light: 0 mm Front distance between columns: 0 mm CNC Brand: Siemens CNC Model: 840 D MACH-id    5212 MAKE        FinnPower TYPE          C5 Compact Express YOP            2009 SPECIFICATIONS Table load in kG       200 Kg Working area X Axis      2584 mm Working area Y Axis        1270 mm Working area X Axis with override       5168 mm Punching force      30 T Maximum sheet thickness       8 mm Turret position        20 Auto indexing positions        2 x Multi tool Positioning speed X and Y Axis      10800 mm/min. Change speed revolver      166 Rpm  ...

Handle hole punch (bags) -Knuckle punch with punch and die for 20 x 90 mm handle hole -Suitable for bags or paper bags

Punching machine Trumpf TruMatic TC3000-1300 FMC Year of construction 2004 87500 hours (03.2021) In this case, the configuration : TruMatic TC3000-1300 FMC Year of construction 2004 Working range : 2550 x 1280 mm Standard: • Sturdy C-frame • Coordinate guidance with integrated linear magazine, 21 seats for tools and clamps • 2 clamps • Drives: Maintenance-free digital three-phase servo motors • Punching head: hydraulic system with closed control loop, hydraulic mono tool holder, 360° rotation for all Tools, automatic tool length compensation, programmable scraper movement • Programmable hold-down • Tool spray lubrication • Punch butt suction • Partial slide 500 x 500 mm • Control Bosch PNC-P, activity-oriented user interface, Online Help, Diagnostics, 3.5" Floppy Drive, RJ45 Network Connection • Graphics programming ToPs 2000 • ToP ...

Hydropneumatic functioning Punching power: 50 kN Height: 140 mm

Technical data: -maximum cutting force 300 kN -maximum punching diameter up to 88.9 mm -Max that material thickness 6.35 mm -Work area without putting up 1000 x 2000 mm -Actual workspace 1145 x 2100 mm -Work area normally with putting 1000 x 4000 mm -Size work table 1000 x 3500 mm -maximum working speeds of the axes 50 m / min -Max stroke sequence. 320 strokes/min -2 collets min. / max. distance 160-1900 mm -Need for compressed air 6 bar -Power supply 400 V / 15 kW -Space B 4200 x T H 3800 x 2250 mm -Weight approx. 6500 kg -with:-tool station 360-degree rotatable programmable 0.01 ° -CNC control - div. accessories in the separate tool Cabinet

CNC punching machine make EDEL type Microcut 211Machine -No: 30287 Year 1998Punching force: 200 kNDirect working area: 1500 x 1000 mmTool size up to: 100 mm diameter, as well as forms: within this circular areaMaterial thickness up to: 4 mmfree passage up to approx. 30 mmWiper system: sprungTool System:: Noble Quick Change ::: Tool head 30x120 / 146x40Total connection value: up to: 16 kVA (400 V, 50 Hz) Protection class: IP54, control voltage 24 V,: DCWidth x depth x height: 3350 x 3750 x 1800 mmWeight: 7500 kgIncl.:- Mechanical and control technology REVO - M Basic equipment for the use of turret tools- ram stroke programmable (instead of manual adjustment)- CNC LOGO and programming with workpiece graphics- 1 set of set-up elements with leveling device- CNC CAD programmer software in standard version- 6-fold Rev. tools- Tools for Rev. Ø 4,2 - Ø 6,5 - Ø 8,5 / right 18x6 wide side fron ...

Copy and coordinate nibbling machine make TRUMPF type CN 701Machine -No: 1118Technical specifications:Horizontal projection: 1550 mmWorking area: 1250 x 1300 mm: 1250 x 2000 mmSmallest section of a circle for copy nibbling: 12 mmsmallest circular diameter with internal circular guidewhen shearing: 56 mmsmallest circular diameter with internal circular guidewhen nibbling: 65 mmstepless stroke rates: 350-1400 H / minWorking height: 1020 mmDrive power: 2.2 kWExternal dimensions approx .: 2900 x 950 x 2130 mmWeight approx: 2125 kgWith- lots of accessoriesused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Controlled turret punching machine, used controlled turettpunching machine, used Fabr.: EDEL Model: MICROMAT 207 HS Control/ control: LOGO 2000 (with workpiece graphics / with workpiece graphics) Built / year: 1997 Force/punching force: 20 t  Maximum sheet thickness/ max. thickness: 0.5 ... 5 mm Travel in X-axis/ travel in X : 1250 mm (expandable to / enlargeable to 2000 mm) Travel in Y-axis / travel in Y axis: 750 mm (expandable to / enlargeable to1000 mm) Punching speed / number of strokes: 20 per min Stroke stroke infinitely adjustable up to / stroke: 40 mm Punching example for steel punching 100 mm 1.5 mm ( punch diam. and thickn.) 50 mm 3.5 mm 16 mm 12.0 mm Machine weight/ weight 5 t Connection value / load: 14 kW

a good blanking press Krupp Model PEKRD 250h, 250 tons, year 1980/2005, overhauled 2005, with infinitely variable drive system and Siemens S7 controls, feed system for material 0.5-6 mm, 500mm wide. With decoiler 6 tons. Built as a double-sided C-frame press so that in- and outfeed front-to-back is possible

HACO OMATIC 130 DTRH punching machine was built in 2014 in Belgium. The machine is used to punch various size shapes and holes in workpieces weighing up to 150 kg and having a maximum thickness of 6.5, a width of 1500 mm and a length of 4000 mm. The machine operator manually operates the punching machine by loading the workpiece on the working table and changing the punching tools using a special device offered in the price of the machine. The punching process takes place on the brush table of the punching machine, which significantly reduces noise levels and adequately protects the sheet metal surfaces against various types of scratches and nicks. Depending on the choiceed mode, the machine performs between 1,000 and 1,500 punches per minute with a press force of 30 tonnes. The equipment includes amongst others a TPC 69C Graphics CNC controller for graphical programming of the desire ...

AMADA VIPROS 358 KING punching machine was manufactured in Japan in 1999. The machine is designed for precise punching of holes in workpieces having a maximum length of 1250 mm, 3000 mm width and 50 kg weight, made of mild steel, stainless steel or aluminium. Low noise level and protection of the sheet metal surface from scratches and scrapes caused by the punching process are guaranteed by a machine brush table equipped with two hydraulic clamps to hold the workpiece during the machining process. The punching machine is able to perform up to 1200 punches per minute with a press force of 30 tonnes. The machine is equipped with a FANUC AC Servo X and Y axis drive, 58 tool stations (including four auto index stations) and a control panel with a installed FANUC Series 18-P CNC controller for full control of the punching machine operation. The AMADA VIPROS 358K punching machine has been r ...

Servoelectric punching machine AMADA EMK 3610 NT Punching force 300 kN Working range: 2500 (up to 5000 mm) x 1525 mm AMNC F Control Max sheet thickness 4.5 mm Revolver with 58 stations: 24 x A (max diameter 12.7 mm) 24 x W (max. 31.7 mm) 4 x C (max diameter 50.8 mm) 2 x D (max. 88.9 mm) Automatic indexing: 2 x W (max diameter 31.7 mm) 2 x E (max. diameter 50.8 mm) Machine dimensions LxWxH: 5430 mm x 5120 mm x 2320 mm Machine weight 24500 kg

Servo Electric punching head Large format 3000 x 1500mm With Sheet Master & Duplex carts Year: 2015 Just under 19,000 hours! With tooling

Punching nibbling machine

STANZNIETZUFÜHRER Manufacturer: EM HART Teknologies (Tucker GmbH) Type: ERF230000/3 3x5

Complete with automatic sheet storage tower

Punching machine AMADA Europe 258 Punching force / Punching force 20 ton Working range / working range: 1250mm x 2000mm (4000mm with one reposition. 5000mm or more is also possible with second reposition) Hydraulic-eccentric drive / Hydraulischer Antrieb Turret / Revolver; Total number of 27 stations: Auto Indexing: 2 x B (max dia 31.7mm) 1 x C (max. dia. 50.8mm) Roller table / ball table

AMADA EUROPE 258 punching machine was manufactured in 2000 in Japan. The machine designed for processing sheet metals with a maximum thickness of 6 mm guarantees the highest accuracy and quality of punching, thanks to the use of a precise slider with a hydraulic stroke. This solution, combined with its high reliability and high pressing force, makes the EUROPE 258 punching machine stand out significantly from other machines of its type. In order to allow the user to perform a wide range of machining operations, the machine has been equipped with a capacious turret magazine with 27 workstations (including 3 auto-index stations) with space for tools for many different tasks. In addition, the entire workspace has been protected by SICK safety curtains to ensure the highest level of operational safety. The AMADA hydraulic punching machine weighs 10500 kg. Technical data of AMADA EUROPE ...

The Vierwerke Rapida RDC 106 rotary die-cutter can be configured in different variants to carry out different processes – punching, creasing, perforating, embossing Format max. 740 x 1060 mm Format min. 340 x 480 mm Material thickness from 0.03 to 0.6 mm (grammage 60-450 g/m2) The maximum mechanical capacity is 15,000 sheets/h. Equipment: • Magnetic cylinder in each punching unit to which the dies are fixed • Drivetronic SIS and a camera system to control the sheet guidance in the feeder and in the delivery. • Automatic punch pressure adjustment accuracy of 1 μm, separated for each side • Fast, tool-free change of dies - "Click&Cut" system, set-up times – up to 5 minutes for repeat jobs. • Dynamic arch brake and anti-static system

Busch BLS Die-Cutting machine for labels Age: 2017 Max. die cut size: 230 x 320 mm Min. cut size: 20 x 20 mm Max. stack height: 190 mm Die-Cutting pressure: 5700 kg Max. -Cutting strokes: 16 p/min Max. Performance: 960,000 sheets/hour With trolley and delivery tray With control panel With light barrier With waste conveyor With different die tools The die-cutter is most commonly used for cutting contours of large-sized labels, brochures, children's booklets, credit and loyalty cards, for die-cutting in a two-up system and for counter-pressure cutting with special material for inmould labels. The machines process high volumes of all types of products. These are just some of the wide range of items produced. Labels are, of course, the most important: -Labels of all sorts -Large-sized labels for tins and jars -Inmould labels -Stitched, folded and glued brochures  ...

Enko ES 1800 ST Year: 2009 TECHNICAL SPECIFICATION Suitable for the following Materials Solid board : up to 300 g/m² Corrugated and laminated corrugated : 0.5 - 12 mm Cabability specifications: Sheet size : max. 1800 x 1300 mm Min. 800 x 700 mm Cutting pressure : max. (450 t) 4.5 Maximum number of strokes :max. 3000 s/h Dimensions and Weights : Length of machine : approx. 6300 mm Width of machine : approx. 3200 mm Height of machine : approx. 2150 mm Weight of machine : aprox. 24 t Pile height Feeder : max 1200 mm Delivery : max. 1160 mm Technical Data Gripper edge margin, adjustable from : 10 - 18 mm Cutting knife height: 23.8 mm Wood front edge: 27 mm Electrical connected load: 48 KW Electrical supply: 3 Ph 400 V 50 Hz Compressed air required: 6 bar (kg/m²)

Sheet metal profiling line was built in 2017. Equipment: – profiling machine – guillotine – control system – hydraulic press with an aggregate

Standard

Large Format 3000 x 1500mm With Automation Siemens 840

This Trumpf Trumatic 500R Punching machine was manufactured in the year 2000 in Germany and has 36200 production hours. It is equipped with a Bosh control unit. The machine has a punching force of 220 kN.

This FMS LINE AMADA Punching machine was manufactured in the year 2001. It is equipped with a Fanuc Series 18-P control unit.

This LVD Strippit Global 30 1525 Punching machine was manufactured in the year 2006 in the United States. It is equipped with a Fanuc Series 180i- PB control unit. The machine has a punching force of 300 kN.

This Boschert Twin 1000 Index Punching machine was manufactured in the year 2004 in Germany. It is equipped with a Boschert CNC 32050 control unit and has 2 axis. The machine has a punching force of 280 kN.

This Trumpf Trupunch 5000 Punching machine was manufactured in the year 2007. It is equipped with a Trumpf control unit. The machine has a punching force of 220 kN.

This ERMAKSAN RPP 12730 Punching machine was manufactured in the year 2009 in Turkey. It has 2 axis. The machine has a punching force of 300 kN.

This FINN POWER TP2515I/21/AM Punching machine was manufactured in the year 1996. It is equipped with a Siemens SINUMERIK System 3 control unit. The machine has a punching force of 300 kN.

This Lvd Global 20 Strippit0 Punching machine was manufactured in the year 2003.

This Trumpf Trumatic 5000 R Punching machine was made in 2003 and has 24628 production hours. It is equipped with a Trumpf WIN NT control unit. The machine has a punching force of 220 kN.

This DANOBAT PGA-1 punching machine was made in the year 2000. The machine has a punching force of 300 kN and sheet metal dimensions of 1500 x 3000 mm.

This Italian Technology Tecnumeric 30 C.S.M. 1000 Punching machine was manufactured in the year 2005. It is equipped with a Tecnology Italiana control unit. The machine has a punching force of 300 kN.

This AMADA EUROPE 255 CNC Punching machine was manufactured in the year 2005 in France. It is equipped with a Fanuc Series 18i-PB control unit. The machine has a punching force of 220 kN.

This Pullmax 4000 Punching machine was manufactured in the year 2001 in Sweden. The machine goes with a wide range of tools and computer software. The machine at the moment is not under power. Contact us anytime for further questions.

This AMADA EM2510NT Punching machine was manufactured in the year 2004.

This HACO PM 310V-3 Punching machine was manufactured in the year 2007 in Belgium. It is equipped with a TPC 50 Graphics control unit.

Salvagnini S4.40 punching machine with shear system  CNC control: Salvagnini SysCon Specifications: Working area: 4064x 1803 mm Max dimension of the sheet: 4064x 1803 mm Min dimensions of the sheet: 370x 300 mm Min and Max Thickness: 0.5 -5 according to the material used Maximum weight of the sheet: no limit Grippers for automatic positioning of the blehe: 13x Technology: Multi-press punching head with hydraulic drive Time for the replacement of the punching tool: 0 sec (each tool is ready for use= Simulation Possibility of activating two or more punching units Weight : 19000 kg Machine dimensions: 9967x6426 mm Power 63kW Air supply: 5 bar Punching Productivity & Cutting Productivity  Maximum material thickness: Alumumuim with breaking strength 200M/mm²: 5.0 mm Steel with breaking strength 410N/mm² : 3.5 mm Stainless steel with breaking strength 680 N/mm²:  ...

automatic full punch for cardboard & plastic Manufacturer - Ruge & Singer Model: 7404 Year: 2010 Location: germany Material Condition - used, little time in use, as the purpose is no longer given. Accessories - tool kits Price: on request

Compact machine system for the production of stamped and bent parts made of strip and wire. Tool quick clamping system for shortest set-up times User-friendly machine and process control P CNC 4E Compatibility with RM 35, RM40 and RM4 tools Item condition: very good You purchase the machine as it can be seen in the pictures. The punch bending machine is located in Hildesheim and can be dismantled and picked up by the customer there. Dismantling and transport according to offer and agreement also possible by us. Complete plant closure, large selection of mezzanine, pallet racks, shelves, paternosters. High-quality industrial machines, lathes, grinding machines, manual machines