punching machines 1250 used for sale

Excellent condition - Fully operational - Loading / Transport possible! Feed 10 m/min joint trimming unit Yes snipping unit Ja/Yes profile trimming unit Yes flat scraping unit Yes profile scraping unit Yes

Polar 78 XS, Year 2011 Display Program Airtable Table left Table right Etc. Available: at short term

Offer 26119 Technical data: - Drilling performance in steel ST 60 30 mm - Drilling spindle holder MK 3 - Drilling spindle stroke 125 mm - Drilling spindle speeds infinitely variable 80 - 3200 rpm - Tapping option by reverse / counterclockwise rotation up to M 20 - Projection 260 mm - Max. distance table - drilling spindle 825 mm - Table with 2 T-slots 500 x 360 mm - Height adjustable via rack with hand crank - Drive 400 V / 0.8 / 1.5 kW - Space requirement approx. W 500 x H 1900 x D 950 mm - Weight approx. 230 kg - Cross table with handwheels

Cleaning machine, Fabr. GM Gera, Type: Arcade, for 24,000 bph, control range 7,600 - 26,400 bph, 25 bph, cage pitch 95mm, chain pitch 140mm, with Siemens S7 control

Cleaning machine, Fabr. GM Gera, type: Arcade GEK2.1RV1, for 4,000 bph, 9 b/row, with 0.5 lt NRW bottle, cell pitch 95mm, with pre-soak, caustic bath 1+2, hot water bath 1+2, cold water and fresh water spraying, year 2007

Cleaning machine Fabr. Krones, Lavatec type: KES-2-2-212/22-80, built in 1999 for 0.33 lt Vichy, 0.35 lt. AFN bottle, 0.5 lt NRW and EURO bottle with Siemens Simatic Touch Panel

Cleaning machine, Fabr. PAC, type: CB 16-1 R-7,5 LII, for 6,000 bph, up to 1 lt. bottles, 16 b/row, year 1994, L: 7350mm x W: 2800mm x H: 2800mm Weight approx. 8 to, disassembled, for sale.

Cleaning machine, Fabr. PAC, for 3,000 bph, 6 bph, for bottles with Ø 90mm + height 262mm, with 2 lye baths, hot and cold water and fresh water bath, built in 1995, for sale.

Excellent condition - Fully operational - Loading / Transport possible! total length: 5250 mm Jointing cutter: 2 pcs. DIA Single Edge Feed: Available suction diameter: 80 mm Chip Collection Box (Crosscut Saw) extension arm (extendable to the front) quick heating adhesive container 50 Hz 35.7 A Adhesive application rapid heating tank heating power 3.2 kW application roller motor power 0.18 kW Cross-Cut Saw Unit motor power 1 x 0.37 kW speed approx. 15000 rpm Corner trimming cutter motor power 1 x 0.37 kW speed approx. 12000 min -1 Accessories with roller conveyor including work cabinet, with edges, 6 drawers DIA jointing cutter 100 x 45.5 x 30 x Z2 DIA jointing cutter 3 pcs. new 100 x 45,5 x 30 x Z2 Leitz reversible knife 12 x 12 x 1.5 circular saw blades Leuco 110 x 3.6 x 22 T = 20

Excellent condition - Fully operational - Loading / Transport possible! Total installed power approx. 30 KW Sanding width 1100 mm Workpiece thickness from 4 mm up to 170 mm Motorized height positioning with digital reader Device for automatic positioning of the table according to the required thickness Belt conveyor with 2 feed speeds: 4.50 m/min and 9 m/min Aggregate 1: steel calibration roller with diameter approx. 180 mm, motor power 15 KW Aggregate 2: combined roller and sanding pad aggregate, motor power 11 KW

Code: 0221 Brand: CENTAURO Model: CO 700 - CE Standard Band saw with covered wheel for cutting wood materials, joinery, furniture, furnishings, window frames , doors, plastics, aluminum, composite materials and various - CE Standard Technical data: Diameter of flywheels mm 700 Width of flywheels mm 40 Max cutting height mm 435 Height of worktable from ground mm 940 Min/max blade length 5040/5180 Motor power Hp 4 Diameter of suction mouth mm 100 Tilting table Overall dimensions: mm 1350 x 800 x 2300 h Weight kg 400

Excellent condition - Fully operational - Loading / Transport possible! working width: 1350 mm Workpiece thickness: 3 - 160 mm Sanding belt width: 1370 mm Sanding belt length: 2150 mm Drive motors: Unit 1: 15 kW Unit 2: 7.5 kW Total connected load: approx. 28 kW

For sale is a high-quality universal tool milling machine from the renowned Swiss manufacturer Mikron, model WF 2 SA. The machine impresses with its high precision, stable construction and versatile applications and is in a well-maintained and functional condition. Ideally suited for toolmaking, single part production, repair work and training companies. General information: Machine Type: Universal Tool Milling Machine Manufacturer: Mikron Model No.: WF 2 SA Year of construction: approx. 1985 Condition: Used, well maintained, fully functional Availability: Immediately available Technical data: Travel (X/Y/Z): approx. 420 / 250 / 340 mm Table size: approx. 635–700 × 250 mm Spindle speed: 50 – 2,240 rpm Tool holder: SK40 (ISO 40) Feed: infinitely variable Rapid traverse: approx. 1,400 mm/min Motor power: approx. 3.5 kW Machine data: Weight: approx. 1,0 ...

Excellent condition - Fully operational - Loading / Transport possible! Working width 520 mm Table length 3008 mm Entrance table length 1775 mm Motor 4 KW Speed rotation 5000 rpm Spindle with 4 knives Spindle diameter 120 mm Tilting fence with dimensions 1500 x 175 mm Infeed table with motorized height adjustment, electronic digital readout of cutting thickness

Case Erector BEDO VA988 + Year of construction 1997 Machine no. VA 988.1.52490, serial no. 4705 Output: 20 cart./min. with automatic format change. format range: L 200-650mm W 150-460mm H 100-500mm. Carton outlet height: 600 mm Electrical data: Voltage: 400V 3 phase Frequency: 50Hz Connected load: 7.3 kVA 18 amps Operating pressure: 5-7 bar The machine is equipped with a PLC control make Siemens S 5. Machine weight: 1,500 kg machine dimensions: Length: 3000mm Depth including cardboard magazine: 2100 mm Height : 2100mm Machine weight: 1,500 kg Bottom closure with NORDSON 3400 hot-melt device. If you need more information. We are here to help! Please contact us using the contact form or give us a call

Excellent condition - Fully operational - Loading / Transport possible! BRANDT KDF 220 HIGHFLEX Edge Banding Machine with Joint Trimming Unit - Jointing cutter unit - Edge Magazine Single - pressure rollers 3 pieces with pneumatic 2-point adjustment - cross-cut saw unit with pneumatic adjustment CHAMFER/STRAIGHT - profile cutter unit pneumatic CHAMFER / RADIUS / STRAIGHT - Form Cutter Unit One motor - profile scraper with quick-change heads - flat scraper edge magazine with 1 -fold roller edge thickness 0.4 - 6 mm Workpiece Thickness 8 - 60 mm Feed 11 m/min Joint Trimming Unit 2x 2.2 KW Gluing Unit A6 Snipping Unit 2x 0.18 KW fine trimming unit 2x 0.27 KW Profile Trimming Unit 1x 0.35 KW / WD 40 flat scraping unit yes profile scraping unit yes control EASY CONTROL EC 10+

Code: 0361 Brand: NERLI Model: PN 28 Semi-automatic sanding machine for wood, varnish, polyester, with 1 abrasive belt N° 20 pads with automatic lowering by means of choiceors Table lenght mm 3000 Table width mm 950 Automatic table raising Electronic display Inverter for belt speed Blowers for abrasive belt cleaning Main motor 20 Hp Table lifting motor 1 Hp Max working height 550 mm Belt dimensions mm 9650 x 150 Belt speed mt 25/sec Side support guide N° 2 suction outlets diameter 160 mm Overall dimensions: mm 4850 x 2000 x1850 h Weight kg 2000

Excellent condition - Fully operational - Loading / Transport possible! Feed rate: 10 - 18 m/min Workpiece length: min. 160 mm Workpiece width: min. 60 mm Workpiece thickness: 8 - 60 mm Edge thickness: 0.4 - 8 mm With CE certificate

Automatic straightener, shaft straightener , MAE -25RH, 1996, used Manufacturer: Maschinen- & Apparatebau Götzen GmbH, Germany Connected load: 14.5kva , Dim.: 2.5 x 1.5 x 1.8m, Weight : 5000kg

Kellenberger, 57 U, Beautiful universal and tool grinder, under power Surface grinding, cylindrical and internal cylindrical grinding, tool grinding. X-600mm, Cross: 300, Vertical: 300 Swivel Range 360 Degree Table: 1030 x 214, rotatable, Workpiece Spindle: MK5, 50-420rpm, Center Height: 125/175mm Accessories : Grinding spindle holders, internal grinding spindle, rear grinding device, univ. vice, ... A lot of accessories: see pictures!

Kellenberger, 57 U, Beautiful universal and tool grinder, under power Surface grinding, cylindrical and internal cylindrical grinding, tool grinding. X-600mm, Cross: 300, Vertical: 300 Swivel Range 360 Degree Table: 1030 x 214, rotatable, Workpiece Spindle: MK5, 50-420rpm, Center Height: 125/175mm Accessories : Grinding spindle holders, internal grinding spindle, rear grinding device, univ. vice, ... A lot of accessories: see pictures!

Kellenberger, 57 U, Beautiful universal and tool grinder, under power Surface grinding, cylindrical and internal cylindrical grinding, tool grinding. X-600mm, Cross: 300, Vertical: 300 Swivel Range 360 Degree Table: 1030 x 214, rotatable, Workpiece Spindle: MK5, 50-420rpm, Center Height: 125/175mm Accessories : Grinding spindle holders, internal grinding spindle, rear grinding device, univ. vice, ... A lot of accessories: see pictures!

Kellenberger, 57 U, Beautiful universal and tool grinder, under power Surface grinding, cylindrical and internal cylindrical grinding, tool grinding. X-600mm, Cross: 300, Vertical: 300 Swivel Range 360 Degree Table: 1030 x 214, rotatable, Workpiece Spindle: MK5, 50-420rpm, Center Height: 125/175mm Accessories : Grinding spindle holders, internal grinding spindle, rear grinding device, univ. vice, ... A lot of accessories: see pictures!

CNC cylindrical grinding machine, (carousel) for internal, external and surface grinding. A lot of accessories, such as grinding wheels of different types and sizes. Retrofitted 2007 . Magnetic clamping plate dia 1500mm, Circumferential diameter 1800mm, Largest grinding diameter 1600mm Maximum grinding height 880mm Max. workpiece weight 5to Swivel angle of the grinding spindle: 90° left, 60° right

CNC cylindrical grinding machine, (carousel) for internal, external and surface grinding. A lot of accessories, such as grinding wheels of different types and sizes. Retrofitted 2007 . Magnetic clamping plate dia 1500mm, Circumferential diameter 1800mm, Largest grinding diameter 1600mm Maximum grinding height 880mm Max. workpiece weight 5to Swivel angle of the grinding spindle: 90° left, 60° right

Screw diameter: 120 mm Injectable volume / Shot volume: 6785 cm3 Injectable weight / Shot weight: 6100 g Injection pressure: 1620 bar Column passage / Bettween tie bar: 1120 x 1000 mm Mold Thickness /Tickness tie bar: 500-1200 mm Opening stroke: 1200 mm Ejection stroke: 400 mm 4 corepulling 4 blow guns / 4 air valves Electrical screw motor

4 Spindle High Speed Train Milling Machine, ANGER, HCP 10/5, 2005 Control : NUM, very few operating hours. Methods: X-300, Y-1130, Z-300, - 4-axis +/- 180 degrees 4 high frequency spindles : Precise 60000 / 160000 / 18000 / 16000 rpm , rpm Tool holder : Collets depending on the spindle Chip conveyor, ATC, recooling unit, external measuring system Renishaw Power consumption 41 kw

Screw diameter: 110 mm Injectable volume / Shot volume: 5160 cm3 Injectable weight / Shot weight: 4700 g Injection pressure: 1620 bar Passage between columns / Bettween tie bar: 950 x 1100 mm Mold Thickness /Tickness tie bar: 400-1100 mm Opening stroke: 1080 mm Ejection stroke: 350 mm 4 corepulling 4 blow guns / 4 air valves Electrical screw motor

Key data: 700 , 1670 , 110

Screw diameter: 110 mm Injectable volume / Shot volume: 4750 cm3 Injectable weight / Shot weight: 4320 g Injection pressure: 1670 bar Column passage / Bettween tie bar: 900 x 1000 mm Mold Thickness /Tickness tie bar: 400-1000 mm Opening stroke: 1000 mm Ejection stroke: 350 mm 4 corepulling 4 blow guns / 4 air valves Electrical screw motor

Excellent condition - Fully operational - Loading / Transport possible! Working width approx. 500 mm, motor 4 kW, planing table length 1620 mm, total table length 2850 mm, angle fence swivelling, with narrow dividing rail, SUVAMATIC finger guard, planing shaft with 4 Tersa knives, planing table with slotted table lips.

Excellent condition - Fully operational - Loading / Transport possible! Working width 13 to 230 mm Working height 6 to 120 mm Number of spindles 4 Motor power of dressing spindle 4 to 7.5 kW Motor power of vertical spindles 5.5 to 11 kW Motor power of upper spindle 4 to 11 kW Feeder motor power 1.5 kW Diameter of spindles 40 mm Tool flight circles of throat spindles 125 to 200 mm Adjustment range of spindles axial 30 mm Adjustment range of dressing spindle 5 mm Feed rate 8 m per minute Diameter of feed rollers 140 mm Width of feed rollers 2 x 50 mm Width of roller in outfeed table 50 mm Adjustment range for dressing table and ironing ruler 10 mm Height of right stops 60 mm Length of dressing table 2000 mm

Excellent condition - Fully operational - Loading / Transport possible! Control POWER CONTROL PC 20 PLUS Infeed ruler with motorized single-axis-adjustment Top pressure beam with motorized height adjustment Edge magazine single Jointing cutter unit Cross-cut saw unit 2-motor Profile cutter unit top/bottom with multiple roller scanning Form cutter unit 1-motor Profile and flat scraper unit Buffing unit Edge thickness 0.4 - 8 mm Workpiece thickness 8 - 60 mm Feed 8 - 14 m/min joint trimming unit 2 x 2.2 KW snipping unit 2 x 0.18 KW rough trimming unit 2 x 0.55 KW

Automatic straightener, shaft straightener , MAE -25RH, 1996, used Manufacturer: Maschinen- & Apparatebau Götzen GmbH, Germany Connected load: 14.5kva , Dim.: 2.5 x 1.5 x 1.8m, Weight : 5000kg

Excellent condition - Fully operational - Loading / Transport possible! Sanding width approx. 1350 mm Workpiece thickness from 4 mm up to 170 mm Vacuum transport belt, F.LLI FERRARI vacuum unit power 11 KW Belt conveyor with variable feed speed Feed motor power 4 KW Aggregate 1: EPICS TA-46 transversal sanding belt driven by an electronic sectioned pneumatic pad: 46 sectors, sanding belt dimensions 6550 x 150 mm, motor power 11 KW Aggregate 2: EPICS K-RP 46 combined roller and sanding pad aggregate: roller diameter 220 mm, 46 sectors,sanding belt dimensions 2620 x 1370 mm, motor power 18.50 KW, with blowers Aggregate 3: EPICS PE-46 electronic sectioned sanding pad: 46 sectors, sanding belt dimensions 2620 x 1370 mm, motor power 15 KW, with blowers Aggregate 4: brush unit HYDRA RTC electronic management control, Windows environment

Screw diameter: 93 mm Injectable volume / Shot volume: 3138 cm3 Injection pressure : 1912 bar Column passage / Bettween tie bar: 950 x 850 mm Mold Thickness /Tickness tie bar: 300-1000 mm Opening stroke: 930 mm Ejection stroke: 350 mm 2 cores / 2 corepulling 2 blow guns / 2 air valves Robot interface

Excellent condition - Fully operational - Loading / Transport possible! length of surfacing-table 1,600 mm planing width 500 mm Angle Limit Stop 1100 x 170 mm

Deep hole drilling machine 2-spindle in conversion completely overhauled, like new after conversion. Technical data Drilling method ELB system Number of drilling spindles 2 Min. drilling diameter 1 mm Max. drilling diameter 8 mm Max. drilling depth 300 mm Nominal diameter range workpieces 5-30 mm

APV Gaulin G132T-3.6P high-pressure homogenizer – 15,000 l/h – 250 bar – very good condition Kebn Heytv Iisg Hd Nedk For sale is a high-performance high-pressure homogenizer from the manufacturer APV Gaulin, model G132T-3.6P, designed for industrial use in milk and beverage processing. The machine has been continuously serviced and is in good, fully functional condition. Ideally suited for applications such as milk, yoghurt drinks and similar products. Technical data: Manufacturer: APV Gaulin Type: G132T-3.6P Year of construction: 2000 Capacity: approx. 15,000 l/h Operating pressure: up to 250 bar Version: 2-stage Pistons: 3 Engine power: 137 kW Application: Milk / Yoghurt Drinks / Liquid Products Electric cabinet: available Condition: Machine is fully functional Regularly serviced during operation No known defects Ready to use immediate ...

Excellent condition - Fully operational - Loading / Transport possible! Minimum diameter : 5 mm Maximum diameter : 80 mm Minimum length : 350 mm Maximum lenght : unlimited Productivity : 1/13 mt./min Tool rotation motor : 5,5 Kw Gear motor : 0,75 Kw Motors voltage : 400V/50 Hz

Code: 0359 Brand: MASTERWOOD Model: TEKNOMAT 2000-P - CE Standard Electronic anuba inserting machine with 2 controlled axis for inserting anuba hinges – CE Standard Technical specifications: Working stroke length 3100 mm – Displacement speed 72 mt/min Working stroke height 350 mm – Displacement speed 15 mt/min Working stroke depth 150 mm - Displacement speed 15 mt/min Working table mm 150 x 3800 N° 2 rear stops with manual positioning N° 4 rear bracket-type clamps with reference stops Side stops with manual positioning 1 right - 1 left 2 pneumatic front clamps Anuba unit with double magazine for male female anuba hinges - Diameter 14 mm Tilting head - 7 + 90° Double stem anuba screw device Front fences on machine table for machining of assembled doors and windows Control CNC 2: Microprocessor control unit – Digital display – Multitasking operating syst ...

Delfin Auriga 500 Flow wrapper Serial: 11110 2016, flow wrapper, jaw width 230mm, up[ to 120 cycles per min, infeed length 2100mm, overall length 3700mm, HMI touch screen controls, reel holder up to 500mm film,

Agie Wire Cutting EDM Machine High-Precision Wire EDM System This 2018 Agie AC Progress VP3 represents top-tier wire electrical discharge machining (EDM), offering flawless contour accuracy and superior surface finishes for critical components. Technical Details ‍ 1. Machine identification data Name: Wire Cutting EDM Machine (Electric Discharge Machining) Manufacturer: Agie Model: AC Progress VP3 Machine number: 591.3.020.530 Year of manufacture: 2018 2. Operational parameters Travel (X / Y / Z): 500 x 350 x 426 mm Travel (U / V): ± 70 mm Max. taper angle: 30° at 100 mm height Max. workpiece dimensions (X / Y / Z): 1050 x 650 x 420 mm Max. workpiece weight (without water): 400 kg Max. workpiece weight (with water): 800 kg Wire diameters: 0.15 – 0.33 mm Generator: IPG-VPC Max. cutting rate: > 500 mm²/min Best surface roughness: Ra 0.2  ...

Inv. Num. : 9078 Type: LC 3015 F1 NT Producer: AMADA Generated: Parameters: Work table length: 3000 mm Work table width: 1500 mm Feed length X-axis: 3070 mm Y-axis feed length: 1550 mm Feed length Z-axis: 100 mm

Agie Wire Cutting EDM Machine Precision Wire Cutting EDM Machine A staple in advanced toolmaking, this 2006 Agiecut Progress V3 delivers highly reliable and accurate wire EDM capabilities for intricate metal cutting applications. Technical Details ‍ 1. Machine identification data Name: Wire Cutting EDM Machine (Electric Discharge Machining) Manufacturer: Agie Model: Agiecut Progress V3 Machine number: 333.010.008 Year of manufacture: 2006 Control: AGIEVision 5 2. Operational parameters Working area (X / Y / Z): 500 x 350 x 426 mm U-V Axis: +/- 30° / +/- 70 mm Max. workpiece dimensions (L x W x H): 1,050 x 650 x 420 mm Max. workpiece weight (with/without Dielectric): 800 kg / 400 kg Resolution of axes: 0.0001 mm Positioning speed: Up to 3 m/min Clamping system: Universal beams with fixing holes Cutting wire diameter: 0.2 – 0.33 mm  ...

GeneralUniversal Machining Centre in monoBLOCK construction; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minWorking area 1Longitudinal735 mmCross650 mmVertical560 mmFloor space/WeightWeight approx.14500 KgTool changerTool changer planevertical Type of gripperDouble gripper Number of tools90 Max. tool length370 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets160 mmDirect measuring systemDirect path measuring systemCabineFull protection cabinPackage Mill / Turn HSK-A 63Package Milling / Turning: Upgrade NC-swivel rotary table to Milling - Turning / direct drive Table plate C-axis d 680 mm / 26.8 in Speed C-axis 1.000 min-1 Integrated balancing sensor Motor spindle speedMASTER® HSK-A63 Spindle speed 20 ...

GeneralUniversal Machining Centre in monoBLOCK construction; Control: CELOS X with HEIDENHAIN TNC7 Technical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minTool changerTool changer planevertical Type of gripperDouble gripper Number of tools30 Max. tool length315 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets160 mmWorking area 1Longitudinal735 mmCross650 mmVertical560 mmFloor space/WeightWeight approx.14500 KgNC swivel rotary tableTable surface Ø650 mmCentre bore 32 mmMaximum load (table centre) 600 KgSlot width 14 mmNumber of Slots 9Distance between T-Slots 63 mmRotation speed max.4. Axis 40 rpm4. Axes (swivelling range) 360 x 0,001 degreeRotation Speed 5. Axis 20 rpm5. Axes (swivelling range) +/- 120 degreeDirect measuring systemDirect path measurin ...

General2-axes universal turning center with driven tools and C-axis; Control: Control Fanuc 0i-F Plus with iHMI and Manual Guide i Working areaSwing diameter over bed650 mmMax machining diameter460 mmSwing diameter over X linear guideways520 mmClamping chuck Ø254 mmX travel300 mmZ travel730 mmMain drive 1Type of main driveAC Drive power (100% DC)15 kWDrive power (40% DC)19,5 kWSpeed range-3500 rpmTorque (100% DC)246 NmMax. torque (40% DC)319 NmWork spindleSpindle noseA2-8 Spindle diametre on front bearing140 mmSpindle bore91 mmBar diameter max.80 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.4000 rpmPower max. (40% DC)5,44 kWTropical PackageTropenpaket für Maschine Option beinhaltet: - aktives Kühlaggregat für Schaltschrank - zusätzlicher Ventilator im Bedienpult Empfohlen ab 35°C bis max. 40°C Umgebungstemper ...

GeneralTraveling column machine DMG MORI Design; Control: CELOS with Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minWorking area 1Longitudinal1800 mmCross700 mmVertical700 mmTool changerType of magazineChain Number of tools30 Max. tool weight6 KgMax. tool length300 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets130 mmFloor space/WeightDimensions (L x W x H)6,75 x 3,45 x 2,75 mWeight approx.14320 KgMiscellaneousClamping SystemDIN 69872 NC-swivel head (B-axis)Controlled NC-swivel milling head (B-axis) with clamping in position. Continuously positioning NC swivel milling head with integrated motor spindle for 4/5 axes positioning and simultaneous machining. Swivel range: +/- 90° Swivel speed: 40 rpmFixed tableFixed TableTable ...

General2-axes universal turning center with driven tools and C-axis; Control: Control Fanuc 0i-F Plus with iHMI and Manual Guide i Main drive 1Type of main driveAC Drive power (100% DC)15 kWDrive power (40% DC)19,5 kWSpeed range-3500 rpmTorque (100% DC)246 NmMax. torque (40% DC)319 NmWorking areaSwing diameter over bed650 mmSwing diameter over X linear guideways520 mmMax machining diameter460 mmClamping chuck Ø254 mmX travel300 mmZ travel730 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.4000 rpmPower max. (40% DC)5,44 kWWork spindleSpindle noseA2-8 Spindle diametre on front bearing140 mmSpindle bore91 mmBar diameter max.80 mmDouble cartridge filter for coolantDouble Cartridge Filter for Coolant Options includes two filters placed on the coolant distributor. When one filter is stocked, operator can manually switched  ...

General2-axes universal turning center with fixed tools; Control: Control Fanuc 0i-F Plus with iHMI and Manual Guide i Working areaSwing diameter over bed650 mmSwing diameter over X linear guideways520 mmMax machining diameter460 mmClamping chuck Ø254 mmX travel300 mmZ travel730 mmMain drive 1Type of main driveAC Drive power (100% DC)15 kWDrive power (40% DC)19,5 kWSpeed range-3500 rpmTorque (100% DC)246 NmMax. torque (40% DC)319 NmWork spindleSpindle noseA2-8 Spindle diametre on front bearing140 mmSpindle bore91 mmBar diameter max.80 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmSignal lamp with 4 colours standardSignal lamp with 4 colours Red: general error Yellow: intervention necessary Green: automatic mode Blue: setup modeAlternative Speed TurningTechnology cycle Alternate Spindle Speed (Turning) for the application of an alternate speed for vib ...