punching machines 1250 used for sale

Directly from the manufacturer, the original from the patent holder of Apfel GmbH. Also available in other sizes! Dimensions: W=1040 mm, D=1050 mm, H=2140 mm two-tone powder-coated Housing : gentian blue structure (RAL 5010) Extracts : grey-white structure (RAL 9002) Payload per extension 900 Kg Weight: approx. 517 kg Fully assembled as a set included 6 Tool Holders WKH 210 6 Tool Holders WKH 211 5 Tool Holders WKH 212 5 Tool Holders WKH 213 4 Tool Holders WKH 214 4 Tool Holders WKH 215 Dimensions: 1,040 w x 2,140 h x 1,050 t Curb weight: 517 kg Structure powder-coated in Gentian blue RAL 5010 (body) and Off-white RAL 9002 (excerpts)

Hydraulic punching machine AMADA VIPROS QUEEN 368 with 45 stations. Equipped with FANUC 04PC numerical control, auto-index interface, 4 sheet clamping jaws + 2 base clamp plates, Equifab cooler, PUNCH 5 programming software with automatic nesting, and a set of punch holders. Power ON Hours: 3595H 35M 27S Cycle ON Hours: 1535H 16M 14S Total Hits: 12700196 Manufacturer: AMADA Model: VIPROS 368 QUEEN CNC Control: FANUC 04PC Year of Manufacture: 2001 Number of Stations: 45 Number of Indexed Tools: 4 Maximum Thickness (Standard Steel): 6mm Frame Construction: Bridge-type Press Capacity: 30 tons (294 kN) Press Type: High-speed servo hydraulic cylinder Axis Travel Distance: 1525 x 2000 mm Maximum Sheet Size: 1525 x 4000 mm (with automatic repositioning) Maximum Material Thickness: 3.2 mm mild steel Maximum Hole Diameter (Material Max Cutting Strength 36 kg/mm²): 82 mm diamete ...

Working hours machine: 36101 h Max. punching force: 200 kN Working range punching: 2000 (4000) x 1270 mm Control: Fanuc 18-P Length: 6190 mm Width: 5000 mm Height: 2450 mm Machine weight: 12000 kg

Hot foil stamping machine with original installation on the GTP model. In production.

Size: A4 Equipments: Letter Press Tiegel - DIE Cutter Punching force 40 tons Size min.: 40 x 70 mm Standard chase: 260 x 340mm Speed min.: 2.200 sph - max. 5.500 sph

Size: A4 Technical details: Speed: 5500 Power: 380 V 1,25 KW Net Weight: 1100 KG Measurements: L1,68 x B1,24 x H1,85m Equipments: Skeleton chase: 260 x 350mm Speed min.: 2.200 sph - max. 5.500 sph Size max. 260 x 380 mm Letter Press Tiegel - DIE Cutter Punching force 40 tons Complete with tools and accessories include frame Standard chase: 260 x 340mm Machines No T 184634 H

An Amada CNC turret punching machine for medium format sheets including an MP300 M loading unit, Wilson X-Sharp grinding machine and numerous standard and special punching tools are available. 1) CNC turret punching machine Amada, year of manufacture: 2007, punching force: 300kN, max. sheet dimensions X/Y: 3000mm/1500mm, max. sheet thickness: 6.35mm, stroke rate: 600 strokes/min, simultaneous positioning speed: 128m/min, repeat accuracy: +/-0.1mm, machine dimensions X/Y/Z: approx. 5100mm/3200mm/2300mm, weight: approx. 18000kg. 2) Automatic sheet loading and unloading system Amada MP 300 M, max. sheet dimensions X/Y: 3000mm/1500mm, min. sheet dimensions X/Y: 1000mm/300mm, sheet thickness range: 0.8mm-6mm, max. load capacity per pallet: 3000kg, max. stacking height: 400mm, max. sheet weight: 170kg, max. pallets: 9, pallet change time: 25s, sheet loading time: 18s, weight: approx. 4900kg. 3 ...

connected load frequency: 220 V rated current: 263/152 : 01516 81 663 694 weight of the machine ca.: 1 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

hydraulic: ja : 100 t weight of the machine ca.: 2,9 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Automatic Signature Punching Machine / Automatische Stanzmaschine JAMES BURN Lhermite EM 520 Baujahr / Year 1998 - Serial-No. 211661 Format Einlaufbreite / Size Infeed width 520mm Materialdicke / Thickness max. 3mm (32 pages 80 gr) Geschwindigkeit / Speed max. 10.000cycles/h Papierstärke / Paper thickness 70 to 300 gr.  James Burn Lhermite EM520 is an Automatic Signature Punching Machine.  It can be used for inline or offline production. With Feeder and Jogger delivery. The EM520 features the state of the art modular system for  punching and cutting signatures in line 

Manufacturer: FINN Model: POWER LP6 Year of Manufacture: 2007 Working hours: 21,500 available : immediately Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: FINN POWER Model: LPe5 Year of Manufacture: 2002 Work area: 2500×1250 mm (+ repositioning) AVAILABLE: immediately Find more here - .ucymachines/ Contact us at - sales@ucymachines

Single column hydraulic press, straightening press, punching bracket ECKOLDPressen frame with hydraulic cylinder, mobile press, punching unitType RSD 1500 - 125Masch. No. 317 / 690 Year of construction approx. 1986Compressive force 150 ton. Projection 125 mmSlide stroke 35 mmTable size 280 x 210 mmPlunger area 125 mmInstallation height (plunger to table) max. 265 mmTable height above floor 403 mmHydraulic operating pressure max. 500 bar- without hydraulic unit- Lifter surface with 4 threads M16 and 20 mm guide groove, one centering hole in the middle 15

Eccentric punching machine HAULICK + ROOS type RVD 125Double column - Eccentric pressMasch. No. 212560 Year of construction 1981Compressive force 125 ton. Table size 880 x 800 mmTable opening 470 x 140 mmStand width 900 mmStand width laterally 415 mmRam stroke 45 mmRam adjustment range 0-80 mmInstallation height in the picture 340 mmStroke rate 50 to 300 strokes/min. Engine power main drive 22 kWNe-connection 380 Volt, 50 Hz- Double connecting rod engine with 4-bearing eccentric shaft for off-center tappet pressure

Hydraulic punch, punching rack for the use of punching units JOKA type HP-SHydraulic hole punch, hydraulic press for punching bracketYear of construction approx. 1995Printing capacity 5 ton. Projection 155 mmStroke approx. 20 mmPunching unit width max. 54 mmPunching unit height max. 220 mmDie holder 48 mmMotor power 1.5 kWNeching connection 230 volts, 50 Hz- for the universal use of punching units JOKA SW 20 or SWD 20- Projection of the punching units can be larger, can be pushed through to the rear- Stroke release via

A cylinder roll punching machine Adolf Illig is available. Pass-through width: approx. 850mm, pass-through height: approx. 120mm, roll diameter: approx. 190mm, table dimensions X/Y/Z: 2x approx. 1200mm/1200mm, working height: approx. 800mm, machine dimensions X/Y/Z: approx. 2700mm/1350mm/1550mm, weight: approx. 900kg. An on-site inspection is possible.

Punching force: 500kN, throat depth: 610mm, stroke: 60mm, max. hole diameter in steel thicknesses 15mm/9mm/4.5mm: 30mm/50mm/100mm, max. material thickness: 15mm. Machine dimensions X/Y/Z: approx. 1100mm/1550mm/1750mm, weight: approx. 1650kg. An on-site inspection is possible.

Width 34 cm Year of construction 2000 electric punching and binding machine Electric Punching - Manual Tying Split 3:1 Table model Delivery date: short-term Price on request. We supply and install worldwide.

Inv. Num. : 8689 Type: SBL-1050SE Producer: SABRE Created: 1994 Parameters: Maximum format size: 1050 x 750 mm Minimum format size: 400 x 370 mm Maximum workpiece thickness: 0.1-2 mm Impact pressure: 300 t Service ramp dimensions: 3282 x 1740 mm Length: 5573 mm Height: 2025 mm Width: 2111 mm

Punching force: 300kN, max. operating pressure: 300bar, weight: 13500kg, operating hours: approx. 52300h. Documentation available. An on-site inspection is possible.

IBERICA JRK 105 with Blanking year 2000 A DIE-Cutting press of size 75 x 105 cm (29 517 Hours) Including : Stripping and Blanking Station, NON-Stop Feeder, Control and Pull Lay System, Mini. Paper thickness 90 g/m2, Max. Cardboard thickness 1,5 mm, Max. corrugated 3 mm, Chases and Frames, 300 Tons Cutting Pressure, Speed 8 500 S/Hours. In good Condition, Immediately available

Manufacturer: AMADA Model: AC-2510 NT Year of Manufacture: 2008 Technical data: Punching force: 200 kN Punching drive: Servo-electric drive Machine frame: Bridge frame Travel range (X x Y): 2500 x 1270 mm Positioning speed (X-axis): 80 m/min Positioning speed (Y-axis): 90 m/min Axis simular velocity: 100 m/min Control: AMNC-F Find more here - .ucymachines/ Contact us at - sales@ucymachines

A shoe cutting press from Deutsche Vereinigte Schuhmaschinen (DSGV-/USM Group) is available. Press force: 25t, table dimensions X/Y: 900mm/450mm. Machine dimensions X/Y/Z: approx. 1000mm/900mm/1550mm, weight: approx. 300kg. An on-site inspection is possible.

Equipment: 1 Carriage Feed Right 1 eccentric press 250 kN 4 normal carriage units 1 narrow carriage unit Working Range: Wire thickness range: up to 6.0 mm Strip width: up to 80 mm Feed length: up to 250 mm Power: 10 - 250 rpm

Equipment: 1 pliers feed right 4 Carriage Units Working Range: Wire thickness range: 0.5 - 2.0 mm Band width: up to 10.0 mm Length of move; up to 100 mm Output: up to 300 rpm

Equipment: 1 piece BIHLER noise protection cabin 1 piece pliers feed right 1 piece eccentric press 70 kN 4 Norma sled units 1 piece narrow sled unit Working Range: Wire thickness range: 0.5 - 3.5 mm Strap width: up to 32 mm Feed length: up to 170 mm Power: up to 250 rpm

This AMADA Vipros 255 was manufactured in 2001. It is a used punching and bending machine, ideal for those looking to enhance their metal fabrication capabilities. Contact us for more information about this machine.

This TECHNOLOGY Tecnotransfer 1500x3000 was manufactured in 2007. A robust CNC punching machine, it offers precision and efficiency for your metalworking needs. If you are looking to get high-quality punching capabilities, consider the TECHNOLOGY Tecnotransfer 1500x3000 machine we have for sale. Contact us for more information.

This TRUMPF TRUPUNCH 3000 (S11) was manufactured in 2012. It features a Bosch Rexroth MTX CMP70 control, a maximum sheet format of 2,500 × 1,250 mm, and can handle sheet thicknesses up to 6.4 mm. The punching force reaches 180 kN, with a maximum workpiece weight of 160 kg. It includes a linear magazine with 20 stations and supports various roller tools. Consider the opportunity to buy this TRUMPF TRUPUNCH 3000 (S11) CNC punching machine. Contact us for more information.

This TRUMPF TRUPUNCH 5000 S10 was manufactured in 2013. It features a Siemens Sinumerik 840D control system, a working area of 3050x1550 mm, and a punching press of 220 kN. Capable of handling sheet weights up to 280 kg and thicknesses up to 8 mm, it includes a Linear ATC for 21 tools and additional options like MULTITOOL and ENGRAVING. Regularly maintained and in good condition. Contact us for more information about this machine.

This Finn-Power TRS 6 SUV was manufactured in 2003. A robust CNC punching and shearing machine, it features a punching force of 300kN and shearing force of 250kN. It includes a turret with 20 tool positions and optional a sheet metal storage capable of handling 40 pallets. Ideal for high-quality punching capabilities. Contact us for more information.

This UZMA MAKINA PDM 30 was manufactured in 2012. It features an electronic PLC with a standalone control system, a maximum tube diameter of 90 mm, and a profile size up to 40 x 80 / 60 x 60 mm. The hydraulic motor power is 4 kW, with a total motor power of 5.5 kW. Consider the opportunity to buy this UZMA MAKINA PDM 30 CNC punching machine. Contact us for more information.

This Finn-Power F6-25 5B was manufactured in 1997. A robust CNC punching machine with a machine weight of 14500 kg and a punching force of 300 kN. It operates at a maximum working pressure of 300 BAR. If you are looking to get high quality punching capabilities consider the Finn-Power F6-25 5B machine we have for sale. Contact us for more information.

This KALTENBACH KPS 506 was manufactured in 2009. Its an automatic punching and shearing system for flat bars and angle profiles, featuring a 6-tool automatic changer with hole diameters ranging from Ø5–40 mm. It supports straight and mitre cutting with a working range of 50 × 5 mm to 500 × 25 mm. Includes NC-controlled automatic feeding and a finished part delivery unit. Contact us for more information about this machine.

This TRUMPF TruPunch 3000 S11 was manufactured in 2012. It features a Bosch MTX CMP70 control system, with X/Y-axis travels of 2500 / 1250 mm, and can handle sheet weights up to 160 kg. The machine includes a linear tool magazine with 18 stations and offers functions like MultiTool, MultiBend, and thread forming. Consider the opportunity to buy this TRUMPF TruPunch 3000 S11 CNC punching machine. Contact us for more information about this machine.

This AMADA EMZ 3610 NT CNC punching machine was manufactured in 2011. It features a Fanuc control system, a punching force of 300kN, and a working area of 2500 x 1525 mm, extendable to 5000 x 1525 mm with repositioning. The machine can handle sheet thicknesses up to 4.5 mm and supports a maximum table load of 160 kg. If you are looking to get high-quality punching capabilities, consider the AMADA EMZ 3610 NT machine we have for sale. Contact us for more information.

This ERMAK EPP 1270 x 30 was manufactured in 2010. It features a punching force of 30 tons, a capacity of 6 mm, and can deliver up to 700 strokes per minute. The machine has a motor power of 11 kW and an oil capacity of 300 liters. Dimensions are 4000 mm in width, 4250 mm in length, and 2330 mm in height. Contact us for more information about this machine.

This Sahinler HKP-Z 100 was manufactured in 2016. A robust C-frame PLC controlled deep drawing press, it features a pressure force of 1000 kN and a stroke of 500 mm. The machine includes a large table size of 900x600 mm and a throat depth of 300 mm, suitable for diverse punching and bending tasks. Consider the opportunity to buy this Sahinler HKP-Z 100 punching and bending machine. Contact us for more information about this machine.

This TRUMPF TruPunch 1000 (S19) was manufactured in 2018. It features a closed machine frame, hybrid axis system, and a linear magazine with 20 spots for clamps and tools. Equipped with maintenance-free 3-phase servo motors and a TRUMPF control based on Bosch Rexroth IndraMotion MTX, it offers advanced punching capabilities and efficient operation with only 16,000 work hours. Contact us for more information about this machine.

Hydr. 25 ton plate punching machine with sliding head Work area 1600 x 500 mm Weight approx. 1500 kg Height 210 cm

Demonstration device Hand punch incl. 4-piece haulm divider and haulm plate DIMENSIONS Length 840 mm Width 585 mm Height 1120 mm Weight 42 kg

CNC punching machine manufactured in 1991. This TRUMPF TRUMATIC 120R features a punching force of 15 tons and a maximum punching diameter of 38 mm. It offers a working area of 1000 x 2000 mm with repositioning and includes a complete set of tools. If you are looking to get high-quality punching capabilities, consider the TRUMPF TRUMATIC 120R machine we have for sale. Contact us for further details regarding this machine.

Plate punching machine 70x100 Brand: Grapho Metronic

Punching units, punching unit, punching bracket, punching tool, non-driven notching and shearing units, forming bracket, for notching machine, sheet metal notching machine, notching shear, corner notching machine, corner shear, corner shear -Manufacturer: Raskin, punching unit type 125 NIA 111.163.0 -Punching capacity: 3mm -Dimensions: see photos -Dimensions: 270/200/H150 mm -Weight: 30.5kg

Punching units, punching unit, punching bracket, punching tool, non-driven notching and shearing units, forming bracket -Handover: in the current condition as viewed -Punch bracket: as shown in the pictures -Manufacturer: CEWE -Type: PA35-150 1GN2 N05 -Projection: 150 mm -Dimensions: 270/70/H130 mm -Weight: 8.6 kg

Punching units, punching unit, punching bracket, punching tool, non-driven notching and shearing units, forming bracket -Handover: in the current condition as viewed -Punch bracket: as shown in the pictures -Manufacturer: CEWE -Type: PA14-150 2GN1 K27 -Projection: 150 mm -Number: 2x punching unit available -Price: per piece -Dimensions: 250/45/H140 mm -Weight: 5.5 kg/piece

Offered is a hydraulic punching machine: Punching force: 100tons (Tm), max. punching cross-section: 2350mm², punching capacity (standard): Ø50mm at 15mm material thickness, punching depth: 500-800mm, incl. special accessories: round punch: max. Ø80mm at 9mm, max. Ø100mm at 7.5mm, square punch: 50mm at 12mm, 60mm at 9.5mm, 70mm at 8mm, rectangular punch: max. 90 x 25mm at 10mm. Inspection possible by appointment.