punching machines 1250 used for sale

Key data: 670 kg, 1500 mm, 1125 mm

SPECIAL PRICE valid for orders until 31.12.2024 including frequency converter! The EVP-RA 550 vibratory finishing machine from ERBA has a rising work container base with separation. It has an easily replaceable screening unit as well as a fully automatic PLC process control (optional) and is characterized by high work efficiency by means of an integrated drop stage. Emptying or separation takes place via the integrated flap (manual/pneumatic). On request, a reinforced suspension and a reinforced motor can be installed for higher loads. The motor speed can be infinitely adjusted by means of a frequency converter. The EVP-RA 550 can be linked to other machines due to its lateral discharge. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated ...

Calpe (5) station CNC lathe

Ready-mix Concrete Plant, Concrete Mixing Plant Used Tower complex make Krupp Year of construction 1969 – Control engineering originally by Pfister Waagen Augsburg -Control currently from Dorner Electronic Complete system consisting of: Main tower steel structure by Krupp Multi-chamber silo 1 control room 1 Mixer THZ 3000 (Teka) Year of production 1980 Control engineering originally by Pfister Waagen Augsburg 1 mixer approx. THZ 1500 or THZ 2250 1 Single component silo with screw conveyor on steel frame 4-component silos with screw conveyors on steel frame 1 Sand Filling Elevator 1 steam boiler 1 Residual concrete preparation ( washing screw ) Changes and errors in the technical data, specifications and prices as well as prior sale reserved.

Product number: 3054 Type: 9000 Serial number: 119 Year of construction: 1995 Cutting width: 520 mm Belt width: 480 mm Power: 3 x 380V, 50Hz, 1.5kW Dimensions: 2150 x 900 x 1350 mm Weight: 400 kg

I am selling a fully equipped edge banding machine BRANDT Optimat KDF 220 C, built in 2014: Configuration: Input stop manually adjustable Manually adjustable joint milling Edge banding EVA glue / PUR glue possible Material pressure zone manually adjustable Cross-cut saws pneumatically adjustable Radius milling at the top + bottom manually adjustable Round unit 1-motor manually adjustable Radius scraper R2 can be adjusted pneumatically (set R1 included) Control panel Working height adjustable by servo motor Material height 8-50mm Edge material thickness 0.4-3mm Feed speed 10m/min. Length including feed plate 4150mm Weight 1320kg Very good condition, fully functional ! Including full documentation and CE. Available the same.

Key data: 610 kg, 1510 mm, 1100 mm

Machine type: EVK 350 Manufacturer: ERBA Heating element kW: 2.2 Total volume: 350 lt. Description: With the ERBA Granulate Dryer EVK 350, workpieces can be easily separated from the granulate with the integrated screening device. It has excellent drying ability, a direct heating system and digital temperature control. The working tank is completely sprayed with polyurethane on the inside. The EVK 350 can be linked to other machines. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The price quoted refers to the basic machine. If you are interested, we look forward to hearing from you. We will be happy to advise you without obligation. The European Commission provides a platform for out-of-court online ...

Key data: 990 mm, 1730 , 1200

Machine type: EVK 500 Manufacturer: ERBA Heating element kW: 4.0 Total volume: 500 lt. Description: With the ERBA Granulate Dryer EVK 500, workpieces can be easily separated from the granulate with the integrated screening device. It has excellent drying ability, a direct heating system and digital temperature control. The working tank is completely sprayed with polyurethane on the inside. The EVK 350 can be linked to other machines. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The price quoted refers to the basic machine. If you are interested, we look forward to hearing from you. We will be happy to advise you without obligation. The European Commission provides a platform for out-of-court online ...

Screw diameter; 55mm Injectable volume: 427 cm3 Injection pressure: 1720 bar Passage between columns: 570 x 570 mm Minimum mould thickness: 250 mm max: 750 mm Opening stroke: 600 mm Cores: 2 Robot interface: NO Options: Electrical dosing motor

All spare parts available electrically electric Dialogue 1,2,3,4 Contour 1,2,3 Dialogue 11

Key data: 2000 , 678 , 60

Screw diameter; 60 mm Injectable volume / Shot volume: 678 cm3 Injection pressure: 2000 bar Column Passage /Bettween tie bar: 570 x 570 mm Mould tickness thickness: 250 mm max: 550 mm Opening stroke: 450 mm Core Pulling: 2 Robot interface: yes / Yes E67 Options: 12 Zones chauffe - 12 heating way

for sale are partially overhauled milling machines of the type Deckel FP1 aktiv. Thanks to the 2-axis TNC113 active control, the machine can convince with very simple and comfortable handling. This newer version from 1989 has, among other things, a central lubrication, an electric coolant pump and a machine lamp. The machines are extensively partially overhauled in our workshop and are therefore in excellent condition. You are welcome to convince yourself of this on site. Shipping time: immediately Year of construction: 1989-1992 Machine no. 2102-xxxx Table: rigid angle table Travel: X300mm/Y160mm/Z340mm Quill Stroke: 60mm Connected load: 1.9KW Number of spindle speeds: 16 Speed range: 40-2000 rpm Tool holder: SK40 Feed: Stepless 5-500 mm/min Rapid traverse: 1200mm/min

Key data: 1130 mm, 1600 , 1210

Machine type: EVP-A 550 Manufacturer: ERBA Power kW: 4.0 Total volume: 550 lt. Description: The EVP-A 550 vibratory finishing machine from ERBA has a flat work container base with separation. It has an easily replaceable screening unit as well as a fully automatic PLC process control (optional). Emptying or separation takes place via the integrated flap (manual/pneumatic). On request, a reinforced suspension and a reinforced motor can be installed for higher loads. The motor speed can be infinitely variable by means of a frequency converter (optional). The EVP-A 550 can be linked to other machines due to its lateral discharge. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The price quoted refers to the ba ...

Key data: 3500 , 1212 , 70

Screw diameter; 70 mm Injectable volume / Shot volume: 1212 cm3 Injection pressure: 1877 bar Column passage / Bettween tie bar: 810 x 710 mm Mould tickness thickness: 380 mm max: 820 mm Opening stroke: 710 mm Core Pulling: 2 Robot interface: yes / Yes E67 Options:

for sale are partially overhauled milling machines of the type Deckel FP1 aktiv. Thanks to the 3-axis TNC113 active control, the machine can convince with very simple and comfortable handling. This newer version from 1989 has, among other things, a central lubrication, an electric coolant pump and a machine lamp. The machines are extensively partially overhauled in our workshop and are therefore in excellent condition. You are welcome to convince yourself of this on site. Shipping time: immediately Year of construction: 1989-1992 Machine no. 2102-xxxx Table: rigid angle table Travel: X300mm/Y160mm/Z340mm Quill Stroke: 60mm Connected load: 1.9KW Number of spindle speeds: 16 Speed range: 40-2000 rpm Tool holder: SK40 Feed: Stepless 5-500 mm/min Rapid traverse: 1200mm/min

Year 1990 retrofitted to 2006 Type: S80 Power: 100 kw Clamping force: 80 Tons Passage between columns: 1400 x 800 mm Tray dimensions: 1800 x 1200 mm Minimum mould thickness max: 800 – 1200 mm Maximum mould width: 1200 mm Minimum mould height max: 500 – 1100 mm Total opening of trays: 2000 mm Minimum die diameter: 150-350 mm Hydraulic servo control: 6 spool valves Pneumatic servo control: 17 distributors Screw diameter: 100 mm 23LD Material throughput: 360 kg/hour Parison Regulation: MOOG 400 points Blowing rods: low position Accumulation weight: 8KG/HDPE

Year 1999 Tonnage: 180 T Tray dimensions: 1020 x 1600 mm Max mould height: 2000 mm Max mould width: 1200 mm Min mould thickness: 840 mm Max mold opening stroke: 895 mm Screw diameter: 120 mm L/D ratio: 28 Maximum extrudable weight in PE: 19000 Gr Maximum injectable volume: 25 liters Number of parison regulation points: 100 Die Min/max diameter: 190/450

Alzmetall AB 40 SV Price 9500,-€ Drilling capacity : 45mm Spindle : MK 4 Drilling capacity 45mm Spindle MK 4 Speed 65-1750 rpm Feed rate Yes 0.1 - 0.2 - 0.3 Drilling stroke 165mm Connection 50Hz 380V Motor 2.4KW Machine weight approx. 500kg

for sale are partially overhauled milling machines of the type Deckel FP1 aktiv. Thanks to the 3-axis TNC113 active control, the machine can convince with very simple and comfortable handling. This newer version from 1989 has, among other things, a central lubrication, an electric coolant pump and a machine lamp. The machines are extensively partially overhauled in our workshop and are therefore in excellent condition. You are welcome to convince yourself of this on site. Shipping time: immediately Year of construction: 1989-1992 Machine no. 2102-xxxx Table: rigid angle table Travel: X300mm/Y160mm/Z340mm Quill Stroke: 60mm Connected load: 1.9KW Number of spindle speeds: 16 Speed range: 40-2000 rpm Tool holder: SK40 Feed: Stepless 5-500 mm/min Rapid traverse: 1200mm/min

Milling machine - Universal Make: AVIA Type: FND 25 Year of construction: 1984 Control type: conventional Country of origin: Poland Delivery period: right away Technical details x-way: 400 mm y-way: 360 mm z-Way: 400 mm Mounting table: 800x400 mm Tool holder: SK40 Quill Hub: 100 mm Speed: 40...2000 rpm Total power requirement: 4.5 kW Machine weight approx.: approx. 2.4 t Space requirements approx.: L:1.6xW:1.3xH:2.0 m

Key data: 4

EXHIBITION MACHINE Specifications: - Max. dimension (WxH) Finished part 180x105mm - Working width min. 23mm - Working height min. 6mm - Long min. single workpieces 300mm - Feed speed 6 - 12m/min. - Spindle speed 6,000 rpm. - Spindle diameter 35mm - Usable length horizontal spindle 190mm - Usable length vertical spindle 120mm - Adjustment of feed table and infeed guide 10mm - Horizontal spindle tool diameter 100mm - Min./Max. tool diameter Verticel spindle 100/124mm - Roll forming option Verticel spindle 12mm - Unit adjustment range for the planing heads +/- 1mm - Motor power horizontal spindle 7.5 kW - Motor power Verticel spindle 7.5kW - Motor power feed 0.75 / 1.1 kW - Length of material feeding table 2300mm - Diameter of extraction hoods 1x150mm, 2x120mm

Feed length X-axis: 500 mm Y-axis feed length: 300 mm Feed length Z-axis: 380 mm X-axis travel: 500 mm Y-axis travel: 300 mm Travel Z-axis: 380 mm X-axis feed speed: 500 mm/min Y-axis feed speed: 500 mm/min Z-axis feed speed: 500 mm/min Speed (max.): 2,000 rpm Speed (min.): 40 rpm Weight: 1,250 kg Equipment: Documentation/Manual

Specifications: 3-axis digital display Heidenhain active Working area: 500 x 400 x 400 mm Drive power: 4 kW Fixed table 800 x 460 mm Chip tray Spindle holder SK 40 Speed range n 50-2500 min-1 Feeds 8-630 mm/min Rapid traverse 1.3 m/min Space requirement approx. 2 x 2 x 2 m Weight approx. 1650 kg

Key data: 360 mm

Reishauer Model RZ362A CNC Gear Grinder Maximum Wheel Diameter: 14.17” Maximum Module: 0.275” Minimum Module: 0.0039” Slide Stroke: 6.88” Maximum Helix Angle: ± 45° Maximum Number of Teeth: 600 Minimum Number of Teeth: 6 Maximum Workpiece Weight: 132 lbs. Grinding Wheel Width: 4.09” Grinding Wheel Diameter: 11.02” – 13.77” Speed of Grinding Worm when Grinding: 1100 – 2330 U/min Speed of Grinding Worm when Profiling: 50 – 95 U/min Feed per Revolution of Workpiece: 0 – 0.133” Grinding Worm Infeed Speed: Up to 99.9mm/min / 3.93 IPM Approximate Weight: 14,553 lbs. EQUIPPED WITH: Reishauer CNC Controls. Dittel MBA2000 Balancing Controller. Elbaron R12D Mist Collector. Kato Motor Generator. Freestanding Hydraulic Unit. Hydraulic Oil Pump-Sump System. Free Standing Electrical Control Cabinet. Tailstock. (2) Wheel Hubs. Manuals and Drawin ...

Key data: 4 , 180 mm, 120 mm

Connected load 380V 46A Planing width 180 mm Planing height 120 mm Length of mounting table 2300 mm 4x Leitz reversible knife heads with 4 knives each 2x feed speeds Electric height adjustment 4x star-delta switch 2x Low Pressure Holder Iewdlj0 1x Side Pressure Holder 2x steel feed shafts 1x rubberized pull-out roller Extraction connection 4x120 mm Workshop overhauled

Inv. Num. : 8049 Type: EDM 310 Producer: Exeron Created: 2009 Parameters: Table dimensions: 350 x 550 mm Max. travel length of the X-axis: 310 mm Max. travel length of the Y-axis: 270 mm Max. travel length of the Z-axis: 270 mm Maximum table load: 500 kg Maximum electrode weight: 25 kg Dielectric container capacity: 140 l Container size: 350 x 770 x 520 mm Length: 1500 mm Width: 1760 mm Height: 2200 mm Weight: 1650 kg

Inv. Num. : 8050 Type: CM A64C Producer: Chmer Created: 2006 Parameters: Table dimensions: 800 x 500 mm Max. travel length of the X-axis: 600 mm Max. travel length of the Y-axis: 400 mm Max. travel length of the Z-axis: 350 mm Maximum table load: 1500 kg Maximum electrode weight: 100 kg Container dimensions: 1350 x 740 x 450 mm Machine weight: 3000 kg

Universal milling machine Hermle UWF 802M with Heidenhain TNC124 track control in super CONDITION Specifications: Year of construction approx. 1996 Rigid angle table Speed: 17 to 3550 rpm Infinitely variable feed in 3 axes from 0 to 1600 mm/min Drive Power .:6 KW Travel X/Y/Z: 500/430/400 mm Vertical Quill and Horizontal Quill - SK40 Hydraulic tightening system Weight approx. 2000 Kg Dimensions Length 1.8 m , Width 1.8 m , Height 1.9 m Accessories and equipment: >> Heidenhain TNC124 Track Control >> Hydraulic clamping vertically and horizontally >> Automatic central lubrication >> spindle brake >> operating instructions About the machine : A Hermle UWF 802M tool milling machine with Heidenhain TNC 124 route control is offered. This universal milling machine is in very good condition. A very easy-to-use route control. Lengths and radius corrections are possib ...

Key data: 630 mm, 300 mm, 9 kW

EXHIBITION MACHINE Weight 950 kg Voltage 3 x 400 V Engine power (S6) 9.2 kW / 12 hp Dust extraction connection 160 mm Diameter knife block 120 mm Number of knives 4 Dimensions knife 630 x 30 x 3 mm Max. cutting depth 8 mm Width 630 mm Height capacity thickness planer 3 – 300 mm Dimensions thickness planing table 1160 x 630 mm 8D9Qxjdewy Variable feed speed 5 – 22 m/min. Diameter of feed rollers 70 mm incl. TERSA. Knife shaft Image includes optional accessories

Key data: 1350 mm, 3

electronic control - First roller D=250 mm made of grooved steel - Second roller D=320 mm made of rubber - third roller D=? mm made of steel with carpet with button - Pneumatic on/off of the 3 groups - Air purification fan on the 3 bands - Sanding belt 2620 mm - Electronic oscillation of the abrasive belts - Automatic layer positioner - Variable feed speed of the carpet with inverter KW 2.2 - Vacuum conveyor belt - ionization in the outlet

Workspace: - Travel in X/Y/Z: 220 / - / 710 mm - Center width: 700 mm - Tip height: 170 mm Main spindle: - Max. speed: 3000 rpm - Spindle connection: size 5 (DIN 55029) - Max. drive power: 5.3 kW Tailstock: - Inner cone: MK3 - Quill stroke: 120 mm - Inner cone of the quill: 50 mm

Technical information Exhibition Machine Brand INDUMASH Manufacturer's ref. NOTCHING MACHINE SAF 2 Model SAF 204 Table size 700 x 620 mm Weight 550 kg Gross weight 550 kg

- Spindle speed:50 - 7 100 [rpm] - 6 spindle feeds:0.03 - 0.4 [mm/t] - Spindle stroke:210 [mm] - X-axis machining row:850 / 1 000 [mm] - Y axis machining series:465 [mm] - Z axis machining series:750 [mm] - Tension dimension on table:1 570 x 500 [mm] - T Groove:7 - Groove centre distance:50 [mm] - Width of groove:12H8 - Positioning precision:0.01 [mm] - Repetition Precision:0.005 [mm] - maxi part weight:250 [kg] - Drive power:5 [KW] - Steel Bore Capacity: 30 [mm] - Steel Internal Tapping Capacity: M 20 - Cast Iron Internal Tapping Capacity: M 24

Technical details Grinding length max. 600 mm Grinding width max. 350 mm Control conv. Distance from spindle center to table max. 525 mm Magnetic clamping plate 600 x 350 mm max. table load 400 kg Table longitudinal movement 660 mm Table speed 2 - 28 m/min Transverse movement 360 mm Grinding wheel dimensions max. 300 x 50 x 76.2 mm Clamping width max. 30 mm Drive power - grinding spindle 3.7 kW Total power requirement 8 kW Machine weight approx. 2.1 t Space requirements approx. 4.5 x 3.0 x 2.4 m

Universal surface grinding machine of the Jung brand suitable for tooling, fixture construction, training and mould making Bssx7D8P Travel distances : 400 x 150mm Table size : 520x150mm Grinding length 400mm Grinding width 150mm Workpiece height 240mm Table size 520x200mm Connection 50Hz 380V Motor 4.5KW Machine weight approx. 2250kg Dimensions 2500x2100x1900mm

Make: YOUNG Type: JF 520 Year of construction 1992 Machine weight : 2200Kg Total weight: 2600kg Location : Haiger Price: 24.000 € excl. VAT. Description: Digital display, Fabr. Heidenhain, microprocessor control, profiling device, Fabr. Diaform, Machine Lighting, Coolant System, Sine Magnetic Clamping Table, Fabr. Jung, type SM 50 Specifications: Clamping surface (L x W in mm) 600 x 200 Grindable surface (L x W in mm) 600 x 250 Magnet size max. mm 600 x 200 Grinding wheel dimensions max. mm 225 x 25 x 51 Distance table/spindle center mm 350 (+50) Table longitudinal feed pendulum m/min 1 – 20 Creep gear mm/min 0 – 500 Grinding spindle drive speed rpm 800 – 4200 Power kW (w/creep gear) 2.2 (3.5)

Machine like new from the laboratory x-travel 400 mm y-travel 320 mm z-travel 400 mm Control Heidenhain TNC124 Table size 650 x 350 mm Tool holder SK 40 Spindle speeds 0-4,000 rpm Quill stroke 60 mm Vertical head swivel 90 degrees Total power requirement 5.0 kW Machine weight approx. 1.3 t Space requirements approx. 2.00 x 2.00 x 2.00 m

Key data: 1500 mm, 220 mm, 1700 mm

1 pc. used crankshafts & camshafts - cylindrical grinding machine Make BERCO Model LYNX 2000 Year of construction 2013 Specifications Max. grinding diameter for recirculating grinding 220 mm Max. grinding diameter for cylindrical grinding 300 mm Max. workpiece weight between the tips 150 kg Center height above table 270 mm Center width 1700 mm Max. sanding length 1300 mm Diameter of the chucks 180 mm Tailstock quill path 50 mm Max. grinding wheel diameter 660 mm Min./Max. Grinding Wheel Width 20/80 mm Max. circumferential speed 35/80 m/sec. Grinding spindle head (X-axis) Final drive with linear motor - travel 490 mm Measuring device optical scale resolution 0.0001 mm Workpiece head (C-axis) Workpiece spindle speed range 1 - 1000 rpm. Encoder Measurement Range - Resolution 0.0001 degrees Table (Z-axis) Final drive with linear motor Measuring device optica ...

5 rollers straightening machine, Diameter of leveling rollers 40 mm, Belt passage 350 mm, a D80 mm feed roller with pneumatic pressure, Infeed roller basket Control cabinet, Connection cable with CEE connector 16A.

Key data: 320 mm, 110 mm, 6

MAX DIAM 320

Key data: 356 mm, 406 mm, 4000 1/min

Machine Details Stock number 1105-04050 Machine Type: CNC Lathe - Inclined Bed Machine Make HAAS Type SL 15 Year of construction 2019 Condition Control type: CNC Control Haas Storage location HAGUENAU Country of origin Delivery time immediately Freight base from location Price Technical details Turning diameter 356 mm Turning length 406 mm Control Haas Chuck diameter 210 mm Passage 51 mm Circumferential diameter 480 mm Speed 4000 rpm Power 407 Nm Power 15 KW Tool Changer 10 VDI Gear stages 0 Total power requirement 25 kW Machine weight approx. 5 t Space requirements approx. 3.3 X 2 X 1.9 H m Information CNC HASS LINING DIA 210 MM SPAENEFOEDERER TAIlSTOCK

Key data: 13750 mm, 5000 mm, 1000 mm

Ingersoll MasterHead 5-Axis CNC Planer Mill Model : MasterHead Age : 2016 SERIAL NO.: 28806 (27-01) FEATURES: FANUC 31I 5-AXIS NEW 2016 DOUBLE HOUSING ADJUSTABLE RAIL AUTOMATIC TOOL CHANGER AUTOMATIC ATTACHMENT CHANGER 2-AXIS MILLING HEAD ATTACHMENT 5-SPINDLE UNITS TRAVELS: X-AXIS, TABLE TRAVEL 541.1" (13750mm) Y-AXIS, HORIZONTAL HEAD TRAVEL 196.85" (5000mm) Z-AXIS, RAM STROKE 39.37" (1000mm) W-AXIS, VERTICAL TRAVEL OF CROSS RAIL 98.42" (2500mm) A-AXIS, HEAD ROTATION, 360 DEGREE 360,000 POSITIONS B-AXIS, HEAD SWIVEL, 180 DEGREE 360,000 POSITIONS SPECIFICATIONS: TABLE SIZE, JOINED 137.79" X 509.4" (3500 x 12940mm) TABLE SIZE, UN-COUPLED FRONT 137.79" X 255.5" TABLE SIZE, UN-COUPLED BACK 137.79" X 253.9" DISTANCE BETWEEN TABLE SECTIONS 39.37" DISTANCE BETWEEN COLUMNS 147" RAM CROSS SECTION 23.62" X 23.62" MAXIMUM HEIGHT TABLE TO RAM FACE 127.95"  ...

Specifications: Digital 3-axis digital display HEIDENHEIN TNC 134 X-axis travel 500 mm Y-axis travel 350 mm Z-axis travel 380 mm Tool holder SK 40 vertical milling head with hydr. Tool Clamping DIN 2080 Ring Groove Table type Banquet table Table clamping surface 800 x 360 mm T-slot size 14 mm Weight 1,600 kg Dimensions 1500 x 2000 x 1900 mm Accessories -Central lubrication - Coolant device -Operating instructions

Travel: 1000mm/560mm/1100mm, Tool holder: ISO 50, Quill stroke: 125mm, Speed: 2000rpm, Feed: 3000mm/min, Rapid traverse: 6m/min, Max. workpiece weight: 800kg. Machine dimensions X/Y/Z: approx. 1020mm/1700mm/2650mm, Weight: approx. 7100kg, CNC 432 control, Hours: 7077h. Documentation available.

Key data: 6 , 220 mm, 120 mm

WEINIG 4-sided planing machine model U22A with soundproof cabin Spindle arrangement: R - L - R - O - U - L

Specifications: Travels X/Y/Z 400 x 400 x 375 mm Max. clamping area 350 x 800 mm Speed range (12) 50 - 2240 min-1 Feed, infinitely variable 1 - 630 mm/min Rapid traverse, max. 1.4 m/min Total connected load 4.7 kW Dimensions (LxWxH), approx. 1300 x 1215 x 1700 mm Weight with pallet, approx. 1700 kg Equipment: Digital Rigid angle table Coolant Setup

- Travel X/Y/Z: 500/500/380 mm - Speed range: 50 - 2240 rpm -Power. 1.8 / 2.6 KW - Spindle brake - Feed: X-Y-Z infinitely variable 1-750 mm/min - Rapid traverse X-Y-Z 1400 mm/min - Rigid angle table 450 x 800 mm - Spindle holder SK 40 M16 (ISO 7388-1) - Weight approx. 1650 kg - Space requirements: L x W x H: approx. 1700 x 1800 x 1800 mm

Details Turning diameter 165 mm Turning length 1000 mm Total power requirement 2 kW Turning diameter over bed 335 mm Rotary diameter via tool carriage 310 mm large turning diameter via cross slide 168 mm Bed width 250 mm Main spindle diameter 42 mm Main spindle nose CAMLOCK n-5 - DIN 55027 Morse taper 4 Spindle speeds 9 Speed range: 60-2000 rpm max. working feed 0-5000 mm/sec Rapid traverse 5 m/min Shaft diameter 48 mm Tailstock-Spindle Travel 140 mm Machine weight approx. 1100 kg Control CNC Control Name FANUC 21i/210i

x-travel 800 mm y-travel 500 mm z-travel 460 mm Table size 1000 x 500 mm Spindle holder ISO SK 40 Spindle speeds - infinitely variable 31.5 - 6150 rpm Operating voltage 380 V CNC control heidenhain 425 Rapid traverses 6000 mm/min Quill stroke 90 mm Coolant tank l Total power requirement 13.5 kW Machine weight approx. 3.1 t Dimensions approx. 2.20x2.70x2.35 m Hydraulic tool clamping full 4th axis + 5th axis +45° -20°

Universal tool milling machine from Stimin suitable for tooling, fixture making, mold making and training Travel distances : 320x250x300mm Speed :40-2240 rpm Mounting : SK 40 Table 600x210mm Longitudinal travel (X,Y,Z axis) 320x250x300mm Tool holder: SK 40 Vertical spindle speeds: 40-2240rpm Feeds 12-630mm/min Cjsbxicvyt Connection 50 Hz 3x 380V Spindle motor 2.2KW Machine weight approx. 1000kg Dimensions 1200x1900x1000mm

Universal CNC cycle separation machine of the brand Pinacho suitable for tooling, fixture construction, training and mold making Circumferential diameter 360mm Center width 1000mm Control Fagor 8055 Tailstock MK 3 Tool station Barufaldi 6-fold Speed 1-4000rpm Connection 380V - 5.5 KW