punching cnc machines used for sale

Centerless grinding machine - centerless Ghiringhelli M100 CNC 1A 400x100mm wheel CN 1 axis plunge + through feed grinding The machine can be seen working in our warehouse in Gussago BS. Mimu(dot)com machine tools Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers, cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc., During centerless plunge grinding, the workpiece is ground in one pass, thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece, to work which is given to them with the aid of a tool., The through-feed grinding or also through grinding and longitudinal grinding: pieces, to be worked proceed uninterruptedly with axial feed through the rectification gap., Wheel width: 100, Wheel diam ...

gasleiding: Ø50 x 3,91 mm stalen buis: Ø60 x 3 mm roestvrijstalen buis: Ø60 x 2 mm koper/alu buis: Ø64 x 4 mm massieve staaf: Ø35 mm massieve rechthoekige staaf: 60 x 10 mm vlakke staaf (hard): 60 x 16 mm platte staaf (gemakkelijk): 60 x 30 mm doosdoorsnede: 60 x 30 x 4 mm maximale straal: 200 mm buigsnelheid: 1,25 amp; 2,5 rpm video klik hier Length: 900 mm Depth: 400 mm Height: 1100 mm Weight: 140 kg

max. wheel diameter: 420 mm gear width: 120 mm max. module: 8 min. module: 0,5 control: BWO 783 no. of strokes: 32 - 800 Hub/min stroke: 0-137 mm table diameter: 400 mm table bore diameter: 125 mm total power requirement: 50 kW weight of the machine ca.: 9 t dimensions of the machine ca.: 5,3 x 3,9 x 3,5 m CNC control Heckler und Koch BWO 783 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 2500 mm gear width: 980 mm max. module: 34 min. module: 2 grinding stroke stepless adjustable: 1000 mm root circle dia. min.: 180 mm number of teeth: frei wählbar max.helical angle: 0 - 35 ° grinding slide stroke: 20 / 200 U/mm grinding wheel peripheral speeds:: 35 / 45 m/s grinding wheel diameter: 340 / 435 mm grinding motor: 22 kW pressure angle: 12,5 - 30 ° table diameter: 1300 mm table load capacity: 10000 kp table bore diameter: 300 mm depth of hole: 300 mm roll feed: 0 - 1000 m/min table diameter: 1300 mm workpiece weight: 10000 kg clamping length: 2760 mm clamping height: 420 - 590 mm table bore diameter: 280 mm depth of hole: 300 mm Control: BWO H+K CNC 785 total power requirement: 79 kVA weight of the machine ca.: 40 t dimensions of the machine ca.: 7,3 x 7,9 x 4,5 m - 10 axis CNC control BWO H+K CNC 785 (2nd Generation from 2009) - integrated measurement ...

max. wheel diameter: 620 mm gear width: 90 mm max. module: 12 min. module: - no. of teeth: 6 - 100 pivoting angle: 0 - 90 Grad spindle taper: metr. 100 milling head speed: 28 - 56 U/min connected load: 18 kVA Control: total power requirement: 14 kW weight of the machine ca.: 12 t 2020 Retrofit with new control/electrical system) - CNC control NTC (Fanuc) (German/English) - electric handwheel - new motors/ electrics - various change wheels - chip conveyor - coolant system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: SK 30 mm x-travel: 420 mm y-travel: 240 mm Control: Heidenhain TNC 355 total power requirement: 10 kW weight of the machine ca.: 1,4 t dimensions of the machine ca.: 2 x 2 x 2 m No. 5356 Vertical drilling and milling machine FEHLMANN Picomax 51 CNC 3 Working area: 420 x 240 x 120 / 450 Drive: 4 kW Control: Heidenhain TNC 355 Table 720 x 280 mm / 120 kg load Spindle holder Speed range 55 - 9,000 min-1 Space requirement approx. 3 x 2 x 2.4 m Weight approx. 1,500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Two-roller technology - 180° arrangement of wheels - Closed work area with coolant and lubricant equipment - Hydraulic roundabout centering device - Gearbox with oil circulation lubrication -Temperature Specifications: Workpiece diameter (max.): 360 mm Blank diameter (max.): 380 mm Workpiece length (max.): 600 mm Center width (max.): 1,340 mm Tip width (min.): 200 mm Tool holder DIN 55026: Gr. 11 Force per axis (transverse) (max.): 117 kN Axle force (longitudinal)/feed axle (max.): 140 kN Stroke (transverse): 190 mm Stroke (longitudinal): 690 mm Feed axis speed: (max.) 1.8 m/min Rapid traverse (longitudinal): 7.0 m/min Adjustment roller (axial): 0-20 mm Stroke ejector: 380 mm Ejector force: 26 kN Tailstock stroke: 800 mm Tailstock force: 5-19 kN Speeds (infinitely adjustable): 6-231-387 min-1 25-850-1,550 min-1 Main drive (DC motor): 33  ...

Inv. Num. : 8852 Type: SKJ 8 CNC Producer: TOS Created: GO 2006 Parameters: Control system: MEFI CNC 859 Table diameter: 780 mm Motor power: 40 kW Max. workpiece diameter: 1050 mm Max. workpiece height: 630 mm Max. workpiece weight: 2000 kg Weight: 9000 kg Equipment: Ant electric drives

Key data: 6400 mm, 1 mm

used Jorns double bending machine, with the following equipment: - 4 pneum. Clamping finger with short-part clamping finger - Attachment rail - Foot control - Sheet metal cassettes - Upper beam with rebate groove - Hydr. Material thickness adjustment - Clamp and angle stop (Matic) Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length 6400 mm Sheet thickness max. steel 1.5 mm Sheet thickness max. aluminium 2.0 mm Sheet thickness max. VA 1.0 mm Back gauge (min.) 15 mm Back gauge (max.) 1125 mm Colour anthracite/light grey Total power requirement 20 A Dimensions 7332 x 3721 x 2040 mm Weight 9250 kg Upper beam stroke (opening width) 200 mm Bending angle (max.) 145 degrees Crowning manual without roller scissors Number of stands 5 pieces Insertion depth 1150 mm Machine number K13036

grinding length: 600 mm grinding width: 350 mm workpiece height: mm total power requirement: 7,5 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 390 mm grinding length: 650 mm centre height: 200 mm workpiece weight: max. 250 kg x-axis: 380 mm z-axis: 1150 mm sanding disc diameter: 400 mm peripheral speed: 20-50 m/sec workpiece spindle stepless: 1 - 650 U/min tailstock quill taper MT: 4 quill stroke: 45 mm dia. of quill: 50 mm total power requirement: 22 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 8020 mm, 3 mm

with hydraulic scissors, emergency stop rail, attachment rail, control on the swivel bracket, radius adjustment. The connection Hydraulic power unit is behind the machine. Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length: 8020 mm Sheet thickness steel: 3.0 mm Sheet thickness aluminum: 4.0 mm Sheet thickness front: 1.5 mm Back gauge (max.): 1000 Radius: 1020 Colour: grey/blue Total power requirement: 46 A Space requirement: 10,000 x 2,300 mm Insertion depth: 1000 Machine weight: 8000 kg Oberwangenhub: 200 Roller shears: 3.0mm Number of stands: 10 with cutting device for cutting to length/ Öffnungsweite_ h 200 Max. bending angle: 143 crowning without underbeam adjustment Back gauge (min,) 15 Machine number: 09488-01/K19149

1 CNC cylindrical grinding machine Make: Buderus Model: CNC-335-I-A Year of Make: 2001 CNC control: Siemens 840C Bore machining range: 150 mm Maximum workpiece depth: 100 mm Largest external processing area: 150 mm Largest swing diameter over table: 310 mm Workpiece spindle speeds: 0 – 3000 rpm. X-axis table lifts: 1050 mm Z-axis: 300 mm Infinitely adjustable feed speed: 0.01 - 10 mm/min Stroke-dependent: 0.0005 - 0.1 mm Workpiece spindle positioning: C-axis Machine weight approx.: 7.5 to.

Key data: 5000 mm, 8000 mm, 4000 mm

Berthiez Vertical Turning Lathe • Year of manufacture: 1982 • CNC type: older system (CNC axes) Dimensions and Working Parameters • Table diameter: 5000 mm • Maximum turning diameter: 8000 mm • Maximum turning diameter at center: 5000 mm • Maximum workpiece height: 4000 mm • Ram travel (T): 3600 mm • Saddle travel (TA): 650 mm Speed and Power • Table rotation range: 0.6 – 60 rpm • Table motor power: 140 kW • Maximum load on hydraulic support: 160 t • Ram feed speed: 400 mm/min • Saddle feed speed: 2500 mm/min • Spindle rotation for milling: 0.01 – 0.50 rpm • Positioning speed: 0.001 – 0.50 rpm Tool Carriages 1. Hand-Operated (Primary) Carriage • Kulannum section size: 360 × 360 mm • Axial travel (CA): 2500 mm • Horizontal travel (CB): 3400 mm • Tilt range (E-F): 15° – 45° 2. Side Tool C ...

grinding diameter: 850 mm grinding length: 6000 mm centre height: 425 mm grinding wheel size: 750 x 100 x 305 mm table - swivable: -2 / +2 Grad table load capacity: 3000 kg chucking diameter: 315 mm grinding head swivelling: 90 Grad spindle taper MT: 6 spindle speeds: 12 -300 mm grinding head - power requirement: 22 kW Control: Siemens 840D grinding wheel head adjustable: +30 / -10 ° total power requirement: 41 kW weight of the machine ca.: 22 t dimensions of the machine ca.: 16,0 x 4 x 2,1 m - Siemens Sinumerik 840D CNC control - SBS balance system - INTERNAL GRINDING DEVICE - 4 support steady rests - Tailstock - Coolant system - Electronic hand-held control panel - Ball screws X-Z - Pneumatic quill stroke - Paper belt filter device - Oil mist extraction device - Full protective cover The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle taper: 2 x SK 40 forward bearing diameter: 110 mm milling head speed: 100 - 4500 U/min milling drive: 5,1 kW workpiece length - max.: 830 mm workpiece dia. with double equipment: max. 135 mm taper diameter: 78 g6 mm centre height: 260 mm turning speed range - stepless: max. 15 U/min distance of spindles: 135 mm spindle nose: DIN 55026 Gr. 5 : : stroke of workpiece slide: 810 mm Feed speed: max. 6 m/min. surface area: 200 x 1750 mm : tool post (Z-axis): stroke of tool slide: 120 mm Feed speed: max. 2 m/min. column movement: 200 mm : tail stock: tailstock quill stroke: 100 mm morse taper: 3 MK centre height: 260 mm axial distance of the quills: 135 mm passage of steadyrest: 40 - 80 mm control: SIEMENS SINUMERIK 810 weight of the machine ca.: 6,5 t with SIEMENS-control SINUMERIK 810/820 acc.: NC-dividing unit with back stop, various toolholders, steadies, running centres, coo ...

grinding diameter: 200 mm grinding length: 340 mm centre height: 100 mm Control: CNC : 25 kVA voltage: 110 / 220 / 3x165 / 3x380 VAC control voltage: 24 VDC total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

VOUMARD Model: CNC 300 Condition: Excellent Year: 2007 Machine type: BU 1000 T L7400 Was recently removed from power due to routine upgrades and was making good parts with full functionality. Siemens 840D CNC Control. Manuals included. Has grinding capability for: Internal diameters External diameters Front faces Back faces Internal tapers External tapers Profiles Drive spigots Face keyways Cams Bilobes and trilobes Internal threads External threads Bearing tracks Travels Display .0001degrees or .0001mm A - 360 degrees - 34 t/min B - -20/+1 degrees - 240 degree/min C- 360 degrees - 500 t/min U- 300mm - 20 m/min X - 300mm - 20 m/min Z travel - 1000mm - 20 m/min 4 position turret Workhead Through Bore - 50mm Rotation Speed - 850 Max workpiece weight - 200 daN at 100 mm from flange Taper - metric 70 Weight - 8000kg

Manufacturer: Priess und Horstmann, Type: BAT III-CNC-2, Year: 1996, Control: Priess und Horstmann, Program: yes, Function: Frontenbohrmaschine, Work piece width min-max mm: 100-600, Min.-max. workpiece length in mm: 100-1000, Min.-max. workpiece height in mm: 16-25, Destacking unit: 2, Einlaufrollengang: 2, Dowel driving station: 80, Milling spindles horizontal: Blum, Milling spindles vertical: yes, Fitting type: 21000, Schliesszylinder Bohrstationen: 2600, Schlosskastenfrässtationen: 60, Bänderbohrstationen: 2, Bänder Eindrehstation: 15, Hinges inserting unit: no, Dowel driving station: 3, Working range X: 2, Dowel driving station: 3, Working range Z: 1, Dowel driving station: 3, Drilling support horizontal: yes, Drill gearings: yes, Number of tables: yes, Year :1996

Inv. Num. : 9058 Type: SPV 40 CNC Producer: CZ. TECH Created: 2008 Parameters: Control system: SIEMENS Table diameter: 533 mm Feed length X-axis: 550 mm Feed length Z-axis: 850 mm Max. turning diameter: 850 mm Max. workpiece height: 800 mm Max. workpiece weight: 800 kg Weight: 12500 kg

CNC Deep Hole Drilling Machine Shinil (Korea) Year: 2009 Control: Fanuc Oi-TD Key Technical Specifications • Drilling diameter (solid): Ø 50 – 200 mm • Counter boring max: 500 mm • Trepanning max: 500 mm • Max drilling depth: 6000 mm (6 meters) Workpiece & Motion • Z-axis stroke (tool free): 6000 mm • Work spindle stroke (max): 4000 mm • Z-axis rapid feed: 5000 mm/min • Z-axis cutting feed: 0 – 1000 mm/min • Control axis: Z-axis CNC controlled Spindle & Speed Range • Headstock rotation: 5 – 30 rpm • Tool holder spindle speeds: • 50 – 500 rpm • 25 – 250 rpm • 16.6 – 166 rpm • 8.3 – 83.3 rpm Cooling & Drives • Coolant pump control: Inverter-driven • Motor control: NC controlled spindle & tool rotation Power & Installation • Total power: approx. 335 kW • Power supply: AC 440V / 60Hz  ...

Width of the band swa blades: 50-200 mm Sharpening pitch: 60 mm Weight: 750 kg WINTER CNC BAND SAW GRINDER BANDSAWMAX PNK-CNC PNK-CNC is designed to grind all types of band saw blades used in metal cutting. PNK-CNC guarantees a flawless, fast and precise grinding of NU, NV, PV, PU, KV, SB tooth forms with its state-of-the-art grinding technology Technical specifications: - Band saw width 50-200mm - Band saw length Max. 12m - Blade thickness Min 0.4mm - Tooth pitch Max. 60mm - Tooth depth Max. 30mm - Tooth forms NU, NV, PV, PU, KV, SB Hook angle (0°) (+40°) - Feed rate (speed controlled) Max. 90 teeth/min. - Grinding wheel dimensions D: Ø250mm d:Ø20mm - Grinding wheel thickness 5-13mm (depending on tooth pitch) - CBN Grinding wheel dimensions D: Ø250mm d:Ø20mm - CBN Grinding wheel thickness 2-3mm (depending on tooth pitch) - Grinding wheel rotation (speed controlled) 1400-5500 r.p. ...

Voumard CNC 130F Gang Style 3 Spindle CNC ID Grinder, 2009 – Mist Collector SPECS SHEET X-Axis Travels: 11.81″ Y-Axis Travels: 7.87″ Z-Axis Travels: 9.84″ Spindle Motor: 5.5 HP Max Grinding Wheel Diameter: 5.91″ Max Grinding Wheel Width: 0.59″ Grinding Spindle Speed: 12,000 RPM Grinding Wheel Dimensions: 5.91″ x 0.59″ x 1.97″ Center Height: 6.5″ Workpiece Length: 7.87″ Grinding Depth: 7.87″ Workhead Spindle Speed: 1,000 RPM Workhead Swivel Range: -30/+120°F Internal Grinding Spindle Speed: 42,000 RPM Electrical: 460V, 3-Phase Equipped With Fanuc 21i CNC Controller

Centreless grinding machine GHIRINGHELLI M2200 CNC 5 axes grinding wheel 200x610 CNC FANUC 5 AXIS Variable speed drive on grinding wheel complete overhaul with electric / electronic retrofit Machine in our warehouse in Gussago BS Mimu machine tools (Italy), Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers, cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc., During centerless plunge grinding, the workpiece is ground in one pass, thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece, to work which is given to them with the aid of a tool., The through-feed grinding or also through grinding and longitudinal grinding: pieces, to be worked proceed uninterru ...

spindle diameter: 85 mm x-travel: 400 mm y-travel: 250 mm z-travel: 140 mm w-axis: 450 mm table surface area: 600 x 380 mm table load: 300 kg speeds: 30 - 2500 U/min adjustment speed: 0,02 - 0,08 mm/min tool taper: SK 30 Control: Elesta CNC 211 total power requirement: 9,2 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: 2750 x 1700 x 2700 mm - CNC Control Elesta 211 - with misc. tool holders The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimeco 1675/Dnbsp;straightener with CNC feed system (cybelec) - width: 500 mm - max thickness: 1,6 mm

Dimeco 1675/D richtmachine met CNC-aanvoersysteem (cybelec) - breedte: 500 mm - maximale dikte: 1,6 mm

Key data: 1000 mm, 450 mm

Inv. Num. : 9150 Type: CNC 10 A/B Producer: DÖRRIES Created: GO 2015 Parameters: Control system: Siemens Sinumerik SL Table diameter: 1000 mm Engine power: 69 kW Max. workpiece diameter: 1500 mm Max. workpiece height: 450 mm Max. workpiece weight: 5000 kg Maximum table speed: 2-120/ 20-400 1/min Equipment: Chip conveyor 4-position turret Hydraulic/Manual 3-Jaw Chuck

ELB ELB Super Rubin 020 VA II CNC surface grinder High-precision horizontal surface grinder, specialized for profile punches grinding. With 4 added digital axes CNC Control Wireless Handwheel Bluetooth control Magnetic Table 600 x 300 mm Movements axis X/Y/Z: 650/300/250 mm 4th axis- rotational Grinding wheel: -Dia 300 mm -width 40-50 mm -bore size 76,2 mm Spindle speed 1400-2800 rpm Total power requirement 5,5 kW Weight of the machine ca. 3,4 t 4th axis devices: -Punch former PF350 V-block -Punch former PF650-ER20 -Punch former PFD-ER40 -Punch grinder PGAS- centreless Accessories: Collets Radius and angle dresser RDC Sinusoidal-table for devices SPF 50 Balancing rack for wheels LBS 14 surface grinder High-precision horizontal surface grinder, specialized for profile punches grinding. With 4 added digital axes CNC Control Wireless Handwheel Bluetooth c ...

Offer 26148 Technical data: - Pressure capacity 420 KN / 42 t - Stroke length 0 - 300 mm - Lifting speed 0 - 0.6 m/min - Tool height 200 mm - Bending performance - with prism MW 125 flat approx. 200 x 16 mm - with prism MW 240 flat approx. 200 x 24 mm - Tube bending up to 2 inches - CNC control SIEMENS SIMATIC HMI TOUCH - For angle programming + length programming - Controlled length stop 3000 mm - Various bending tools - Operating hours (read) 1404 h - Drive 400 V / 4.0 kW - Space requirement approx. W 850 x H 1250 x D 1250 mm - Weight approx. 1200 kg

Inv. Num. : 9163 Type: MAH 40/3 CNC Producer: AMOB Created: 2022 Parameters: Diameter of the cylinders: 148 mm Length: 1200 mm Width: 770 mm Height: 1450 mm Weight: 540 kg Hydraulically controlled upper roller feed Can be used vertically and horizontally 3 mechanically driven rollers Side rollers (manually adjustable) Adjustable control pedal 3 standard rollers

grinding diameter: 630 mm grinding length: 3000 mm centre height: 315 mm grinding wheel size: 750 x 100 x 305 mm grinding wheel width: 150 taper: MK 6 chuck diameter: 315 mm grinding head swivelling: 90 Grad grinding spindle head - swivable: 30 ° table - swivable: 4,30 - 6,30 Grad grinding spindle speed: 815 / 935 U/min spindle speeds: 8 - 57 / 28 - 150 mm grinding sp.stock-cross tvl. frwd/rear/total: 420 mm grinding head quick motion: 80 mm table speed -stepless-: 0,05 - 4,5 m/min workpiece weight: 1200 kg grinding spindle drive: 22 kW Control: Siemens 840D total power requirement: 56 kVA weight of the machine ca.: 13 t dimensions of the machine ca.: 9900×2980×1875 mm The machine is suitable for grinding cylindrical and conical workpieces using longitudinal and plunge grinding methods. The table movement, the feed movement of the grinding headstock, and the tailstock quill return are ...

Control Heidenhain ... TNC 430 Clamping table surface... 800 x 400mm Axis X ... 500mm Axis Y ... 400mm Axis Z ... 400mm ISO 40 Spindle speed ... 0-4000 rpm. Max. workpiece weight ... 300kg L x W x H ... 2800x2700x1980mm Machine weight ... 2600kg Main engine power ... 5.5kW The machine is in good condition.

Reinecker Universal Tool Grinding Machine WZS-50 CNC Precision Grinding Machine Profile Grinding Machine Hersteller [manufacturer]: Reinecker Type [ type]: WZS-50 CNC Control unit: Siemens Sinumerik 880G Baujahr[construction year]: 10/1992 Incl. extinguishing system Incl. various accessories Travel axis: X – Y – Z – C – E Interface Type: E32R Weight [weight]: 3000kg Approx. (L x D x H): 3m x 3m x 3m Full documentation is available. Inspection under power can be done at short notice. We will be happy to answer any further questions you may have. Price, from stock here plus VAT. Condition: good - ready for demonstration Delivery: from stock - as seen Payment: purely net - upon receipt of invoice Prior sale, errors excepted. We ask for your order. Other machines and systems available from stock – please inquire. We look forward to seeing you. Phon ...

Key data: 1 t

Type : Thread rolling machine Manufacturer : Thommen – Made in Switzerland Model : PR17-CNC/AC Year of construction : 1999 BOSCH Control unit The system was first owned. The machine brings an error message/malfunction in the display. Mechanically, optically, everything is very good. The machine comes from the first owner, from a German company. Phone 017621834834

Key data: 1 t

Type : Thread rolling machine Manufacturer : Thommen – Made in Switzerland Model : PR17-CNC/AC Year of construction : 1999 BOSCH Control unit The system was first owned. The machine brings an error message/malfunction in the display. Mechanically, optically, everything is very good. The machine comes from the first owner, from a German company. Phone 017621834834

Distance between points: 1000 mm, Height of points: 250 mm, Axis B: Accuracy 0.1 , CNC brand: Kelco , CNC model: 90, Left grinding wheel dimensions (OD x ID x W): Ø400 x Ø127 x 63 mm, Right grinding wheel dimensions (OD x ID x W): Ø400 x Ø127 x 50 mm, Rotation of the workpiece head: -30º +120º , Workpiece holder head cone: MK 5, Max. workpiece weight between points: 150 Kg, tailstock cone: MK 4, Counterpoint reed route: 50 mm, Max tangential speed: 32 m/s, High-frequency internal grinding spindle: Ø120 mm, High-frequency internal grinding spindle brand: WARNER model K 3.000, Main engine power: 7.5 Kw, Total power: 26.5 Kw, Max travel Z axis: 1.150 mm, Max speed Z axis: 15 m / min, Work table rotation: 0º to 9º, Max travel X axis: 320 mm, Max speed X axis: 7.5m/min, Long: 3600 mm, Width: 2000 mm, Weight approx.: 5.000 Kg

Distance between points: 1000 mm, Ø max to be rectified: 400 mm, Maximum length to be rectified: 600 mm, Max travel Z axis: 1300 mm, Max travel X axis: 378 mm, Height of points: 205 mm, Ø of the grinding wheel: 600 mm, Grinding wheel width: 63 mm, Maximum width of grinding wheel: 125 mm, Grinding wheel hole Ø: 203 mm, cnc brand: SIEMENS, cnc model: 840D, Main engine power: 22 Kw, Grinding wheel speed: 45 m/s, tailstock cone: mk5, Counterpoint tour: 100 mm, Workpiece head cone: mk5, Workpiece head rotation: 90º, Maximum piece weight: 300 Kg, Working accuracy of the machine: IT4 ISO, Fine taper adjustment +/-: O, 1 mm/a, speed of the working feed of the table: from 0 to 7.5 m/min, Plan dimensions: 4500x3000x2500 mm, Weight approx.: 8000 Kg

Distance between centers: 1000 mm, Height of points: 230 mm, Main engine power: 9.2 Kw, Working wheel dimensions (od x id x width): 500x80x203.2mm, Ø max to be rectified: 460 mm, Tailstock cone: MORSE 4, Workpiece head cone: MORSE 5, Max. Z axis travel : 1115 mm, Max. X axis travel: 260 mm, Approximate dimensions (length x width): 440x370 cm, Approximate Weight: 4700 Kg

Description WE OFFER AN HIGH TECH CNC LATHE TURNING AND MILLING CENTRE MACHINE IS COMMING OUT FROM FORMULA 1 - MERCEDES WORKSHOP MACHINE WAS FROM NEW HIGEST POSSIBLLE MAINTAINED WITH OFFICAL MORI SEIKI TECHNICAL DATA: Mori Seiki MT2000 CNC Lathe Description: Swing over bed - 700mm, Distance between centres - 1080mm, Max turning dia meter - 550mm, Max turning length - 1020mm, Bar capacity - 65mm, X Travel - 565mm, Y Travel - +/-80mm, Z Travel - 1077mm, B Indexing - +/-120deg, X Travel Turret 2 - 155mm, Z Travel Turret 2 - 1067mm, Spindle Speed - 4500rpm, Spindle nose - JIS A2-6, Tool Spindle Speed - 6000rpm, Tool Spindle type - Capto C6, ATC - 40 Tools, Max tool length - 280mm, Max tool weight - 7kg, Turret 2 Tools - 12, Square shank - 25mm, Boring bar shank diameter - 40mm, ...

Max. diameter of the cut material ... 300mm Control Siemens ... Simatic S7-1200 Machine weight ... 1420kg L x W x H ... 2600x2080x2140mm The machine is in good condition. if possible under power.

faceplate diameter: 1200 mm swing diameter: 1400 mm turning height: 1190 mm Control: Siemens type: 840C max. ram stroke: 1250 mm Tool changer: 12 Pos Table load: 9000 kg cross rail - adjustment: 800 mm turning speeds: 2,5-250 U/min rapid traverse: 4 m/min total power requirement: 55 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 3,95x3,6x5,56 m No. 1096/97 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look  ...

grinding length: 1500 mm grinding width: 700 mm workpiece height: mm grinding height: mm table load capacity: 1200 kg table surface area: ca 1800 x 600 mm table speeds: 2 - 30 m/min stroke: Vertikal 400 mm spindle motor: 37 kW spindle speeds (infinitely variable): 100 - 6500 U/min grinding wheel size: 500 x 100 x 203 mm Control: Siemens 840D total power requirement: 52 kW weight of the machine ca.: - t dimensions of the machine ca.: - m CNC control Siemens Sinumerik 840 D The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 1100 mm grinding length: 7000 mm swing diameter: 1100 mm grinding diameter - min.: 350 mm grinding wheel size: 915 x 100 x 304,8 mm grinding wheel turining speeds: 400 - 1200 U/min grinding motor: - kW spindle headstock drive: - kW Control: Siemens 840D SL workpiece weight max.: 18000 kg total power requirement: 110 kVA weight of the machine ca.: 68 t dimensions of the machine ca.: - m - 2011 retrofitted with new eletctric/mechanic and new CNC - CNC System Siemens 840D sl - Lismar Measuring System - Chuck dia 700mm - 4 steadies - Tailstock The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of spindles: 6 St. Working width: 15 - 250 mm Working height: 10-200 mm Length of the planing table: 2000 mm Feed motor: 4 kW Feed speed: 6-24 m/min. Kuper SWT XL-6 Automatic Planer and Moulder (Window Version with Glazing Bead Separation) ------------------------------------ - Number of spindles: 6 (Bottom, Right, Left, Top, Top, Bottom) - Working width: 15 - 250 mm - Working height: 10 - 200 mm - Spindle speed: Frequency-controlled 4,000 - 8,000 rpm - Feed speed: 6 - 24 m/min, infinitely variable - Feed motor with electronic brake: 4 kW - Equipped for glazing bead separation in window production - Motorized axial and radial spindle adjustment - K2 Comfort Control, Professional - 9 Touchscreen Manufacturers Description (Summary): ------------------------------------ 1st Spindle: HORIZONTAL BOTTOM ------------------------------------ Siemens IE3 motor with inverter brake: 7.5 kW D ...

Key data: 3100 mm, 2 mm

Schechtl MAN 310 CNC folding machine with touchscreen. You will receive a proper invoice with VAT.

ELB Brilliant-Future 20 CNC Surface & Profile Grinding Machine Manufacturer: ELB-Schliff (Germany) Model: Brilliant-Future 20 CNC Serial No.: 430090398 Country of Manufacture: Germany A high-precision German-made CNC surface and profile grinding machine equipped with automatic dressing system. ELB Brilliant-Future machines are designed for precision grinding applications requiring high accuracy and excellent surface finish. Specifications: Table size: 460 × 2440 mm Control: CNC Automatic wheel dresser: Included Machine type: CNC Surface / Profile Grinder Grinding applications: Tool & die manufacturing Mold production Precision mechanical components General high-accuracy grinding operations Features: CNC-controlled grinding operation Automatic grinding wheel dressing German precision engineering Suitable for long workpieces requiring  ...

Key data: 6020 mm, 1 mm

with motorized scissors, with CNC depth stop, with 4-stop finger (tilt-turn finger), with 5 stand units, the machine is located in good and well-maintained condition Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length 6020 mm Sheet thickness max. steel 1.25 mm Sheet thickness max. aluminium 2.00 mm Sheet thickness max. VA 0.80 mm Back gauge (max.) 1000 mm Color: Blue Total power requirement 16 A Dimensions 6900 x 1580 x 1870 mm Weight 3000 kg Upper beam stroke (opening width) 200 mm Sheet thickness adjustment yes, manual Bending angle (max) 140 degrees Roller shears yes, motorized Number of stands 5 pieces Machine number 9538-10

grinding length: 5200 mm grinding width: 1300 mm workpiece height: 320 mm Control: Siemens 840 D main drive: 306 kW total power requirement: 380 kW weight of the machine ca.: t dimensions of the machine ca.: 11,21 x 3,2 x 3,85 m CNC production surface grinding machine with segment head Grinding length 5200 mm Grinding width 1300 mm Workpiece height 320 mm Control Siemens 840 D Passage width 1300 mm Grinding height 320 mm Grinding motor 306 kW Grinding motor speeds up to 320 rpm Grinding motor feed, infinitely variable 0.5-35 m/min Grinding motor infeed in steps of 0.002-1 mm Grinding motor infeed continuously stepless upto 5 mm/min Space requirement approx. 11.21 x 3.2 x 3.85 m Including accessories. - Coolant system - Magnetic clamping device - Switch cabinet - Oil mist extraction - Documentation Dimensions (length x width x height): Bed: 11200 x 2400 x 1600 mm, weight 28000 kg Grindin ...

grinding length: 4200 mm grinding width: 1300 mm workpiece height: 550 mm Control: SIEMENS 840 D magnetic clamping plate: 4200 x 1300 mm segment head diameter: 1400 mm grinding motor turning speeds up to: 320 U/min. grinding motor: 306 kW weight of the machine ca.: 50,0 t dimensions of the machine ca.: m Segment dimensions: 120/106 x 41 x 250 mm Number of segments: 1 set = 26 pieces Grinding motor feed: 0.5 - 35 m/min, infinitely variable Grinding motor feed: - in steps: 0.002 - 1 mm continuous: up to 5 mm/min. infinitely variable Equipment: CNC-control SIEMENS Sinumerik 840 D Automatic hydr. swivelling of the grinding motor from hollow to cross grinding NC-controlled adjustment of the Marposs measuring head by means of precision support. - new grinding dimensions can be entered into the control, whereby the the grinding head automatically adjusts to the corresponding height. Dresser ...