punch press used for sale

Safety distance: 100 mm Run-time travel: 60 msec Table dimensions: approx. 210 x 160 mm incl. installed punching tool Auction-ID: A7-46287-213

Machine number: H74/247 Press force: 4 Mp Oil pressure: max. 200 atm Motor power: 1.1 kW Table dimensions: approx. 250 x 250 mm Auction-ID: A7-46287-208

Machine number: 2561290 max. load: 250 kN Throat: 190 mm Plunger strokes: 80 1/min Plunger adjustable: 45 mm Stroke adjustable: 8 - 80 mm Motor power: 2.2 kW Voltage: 380 V Table dimensions: 555 x 430 mm Auction-ID: A7-46287-22

Machine number: 35-173-98 Serial number: 2-0499 Compressive force: 4.5 kN Stroke: 60 mm incl. transport trolley Auction-ID: A7-46287-6

max. load: 25 kN Projection: 90 mm Plunger strokes: 220 1/min Plunger adjustable: 30 mm Stroke adjustable: 2 - 40 mm Table dimensions: approx. 220 x 150 mm incl. The installed punching tool Auction-ID: A7-46287-210

Consisting of two punching stations, driven by pneumatic cylinders incl. Installed punching tool on pedestal Dimensions of the pedestal: 560 x 300 x 170 mm Auction-ID: A7-46287-206

Machine number: 2-0586 Compressive force: 28 kN Stroke: 60 Table dimensions: approx. 200 x 150 mm incl. installed punching tool Auction-ID: A7-46287-204

Serial number: 055-007/12 Operating voltage: 220 V Frequency: 50 Hz Nominal current: 45 A Connection: 12.5 kW Control voltage: 60 W Press force: 25 Mp Operating pressure: 160 kp/cm³ Speed: 200 mm/s Sales: 450 mm/s Plunger stroke: 500 mm Projection: 360 mm Maximum distance between ram and table: 800 mm Table dimensions: 640 x 500 mm Auction-ID: A7-46287-167

Serial number: 101 Pressure: 6/7 bar on base Reference: Groven - Lot 16 Auction-ID: A7-46763-314

CNC-controller Delem DA-65R, bending pressure 1100kN, working lenght 3100mm, capacity - 7,5kW, voltage - 3PH 380 Volt, hydraulic oil - 120l Auction-ID: A7-46486-1

Offer 26134 Technical data: - Pressure capacity 160 t - Working width 3080 mm - Passage between the uprights 2550 mm - Projection 250 mm - Installation height 400 mm - Feed speed 100 mm/sec. - Working speed 7 mm/sec. - Retraction speed 70 mm/sec. - Ram stroke 160 mm - Motor power approx. 7.5 kW - Oil filling approx. 300 l - Space requirement approx. W 3850 x H 2850 x D 1800 mm - Weight approx. 7800 kg - with: - Swivel arm – control panel with control CYBELEC DNC 60 - Mot. Back gauge up to 625 mm - Crowning device - Lasersafe - 4-fold universal die split, split V-matrices, - Split sharpening tool, etc. - Two-hand control panel, foot switch, - Separate tool cabinet mobile

380V; Motor: 4000W; Max. Flow: 14L/min; Max. pressure: 200 Bar; Max. intel water temp: 50 degrees; Power cable length: 3M; Automatic stop; Filter; High-pressure hose 10M; Spray nozzle 5759 Auction-ID: A1-46416-362

crimping range 15-63mm; max opening 75mm; pressure 53.5 Mpa; force 500 T; 3000W; 380V; 5585 Auction-ID: A1-46416-347

380V; Motor: 4000W; Max. Flow: 14L/min; Max. pressure: 200 Bar; Max. intel water temp: 50 degrees; Power cable length: 3M; Automatic stop; Filter; High-pressure hose 10M; Spray nozzle 5759 Auction-ID: A1-46416-361

max. working pressure: 170 bar; Temperature range min.: 0 °C; Temperature range max.: 60 °C; capacity: 540 l/hr; mobile: yes; power: 5.14 kW; unused in box; with various accessories; 3902; Auction-ID: A1-46416-525

3400PSI; rated flow 2.6GPM; 212cc; 2.6GPM; 7548 Auction-ID: A1-46416-405

well functioning, equipped with: pin 35mm tension, mechanical support leg, control box, stabbing pick-up, Trelleborg 600/55-26.5 tires, foil wrapper, output with support wheel, LED lighting, lubrication system, Auction-ID: A1-40138-41

Temperature range max.: 140 °c; capacity: 900 l/hr; diesel-fired: yes; power: 7.3 kW; connection: 400 V; unused in wooden box; 4496; Auction-ID: A1-46416-241

Equipped with: Hour position: 339 hours, turntable, extraction, pressure vessel, doors over the full width 1780 mm and depth 1800 mm of the cabin, with hatches in the doors for long objects; Turntable ø 1500mm, on rails, can be driven out of the cabin, external blast pot with automatic recovery (recycling system). Large size extraction, type: SO-250p, motor power: 4.0 Kw; sound attenuation on exhaust; with speed control and automatic filter cleaning; Cyclone pre-separator. including 3-fold LED lighting. The Sant-Tech PK-180 blasting cabinet set (year of construction 2020) consists of a cabin (±1.5–1.8 m wide, 0.8–1.0 m deep, 1.9–2.0 m high, ±800 kg) with 230V supply, air consumption ±12,000 l/min and working pressure 2–8 bar, combined with a ZO-250P extraction (400V, 4 kW, 4–6 bar, ±250 kg, approx. 0.8–1.0 × 0.8–1.0 × 2.0–2.3 m) and a 40-litre pressure vessel (wor ...

max. working pressure: 170 bar; Temperature range min.: 0 °C; Temperature range max.: 60 °C; capacity: 540 l/hr; mobile: yes; power: 5.14 kW; unused in box; with various accessories; 3902; Auction-ID: A1-46416-526

Security saw does not work. Workbench/support workbench dimensions: 155x68x101 cm. Warehouse trolley with vice dimensions: 128x69x98 cm Auction-ID: A1-41996-108

Spotting press from the manufacturer Rice , type TOS 160-100 . Manufacturer: Rice Type: TOS 160-100 Nominal force: 1000 kN Table length: 1800 mm Table width: 1550 mm Table travel: 2000 mm Installation height: 1800 mm Auction-ID: A7-46802-46

max. working pressure: 170 bar; Temperature range min.: 0 °C; Temperature range max.: 60 °C; capacity: 540 l/hr; mobile: yes; power: 5.14 kW; unused in box; with various accessories; 3902; Auction-ID: A1-46416-523

3400PSI; rated flow 2.6GPM; 212cc; 2.6GPM; 7548 Auction-ID: A1-46416-404

Temperature range max.: 140 °c; capacity: 900 l/hr; diesel-fired: yes; power: 7.3 kW; connection: 400 V; unused in wooden box; 4496; Auction-ID: A1-46416-242

max. working pressure: 170 bar; Temperature range min.: 0 °C; Temperature range max.: 60 °C; capacity: 540 l/hr; mobile: yes; power: 5.14 kW; unused in box; with various accessories; 3902; Auction-ID: A1-46416-524

crimping range 15-63mm; max opening 75mm; pressure 53.5 Mpa; force 500 T; 3000W; 380V; 5585 Auction-ID: A1-46416-346

Technical data Machine Type: Edge press with automatic feeding, manual gluing process Application: Woodworking / Door production Max. working area: 2930 x 1330 mm Min. working area: 950 x 500 mm Guideline clocking: 20-30 sec. Installation: roofed, in production hall Configuration Loading: automatic separation and feeding of panels Workpiece length: 300 – 2,500 mm Workpiece width: 300 – 1,300 mm Workpiece thickness: 25 – 65 mm Stacking height: max. 1,600 mm Working height: 950 mm +/- 20 mm Cycle capacity: approx. 1 part/minute Max. workpiece weight: 200 kg Gluing device: BÜHNEN GmbH & Co. KG Type: M101104220 HB 6100-2 CONNECT P110 Outputs: 2 Ser.-No.: 2F002318 Auction-ID: A1-46310-1155

With patented MULTIFORCE hub connection system!, The punching press automatically adjusts the cutting force to the size of the punch tool., It does not matter how resistant or thick the material to be cut is., Cutting table: 1,000 x 500 mm, Reach: 370 mm, Maximum cutting capacity: 25 t – 245 kN, Dimensions: 1.000 x 1.140 x 1.710, Net weight (with oil): 1.020 kg

Press force: 1800kN, stroke: 300mm, strip width: 80-400mm, max. coil weight: 3t, system operating pressure: 250bar, pump drive power: 15kW. An inspection on site is possible.

CONTROLS   PLC SIEMENS SIMATIC PANEL PRESS FORCES   total force (nominal): 500 to PRESS TABLE   table surface (left-right): 2800 mm   table surface (front-back): 1400 mm SLIDE   stroke: 450 mm SLIDE (HYDR. PRESS)   return force: 38 to TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 850 mm DIMENSIONS / WEIGHTS   total weight approx.: 175000 kg

Key data: 20 t

20T Durendus C-Stand Assembly & Small Batch Press For sale is a C-column assembly and small series press from the manufacturer DURENDUS with a maximum press force of 20 T. The machine has a table size of 700 × 920 mm, a maximum installation height of 550 mm and a stroke of 400 mm, making it suitable for assembly work, small series production, press-fit work and straightening processes in industrial use. Technical data + information: C-Stand Assembly & Small Batch Press – 20 T – 700 × 920 mm General information - Type: C-frame / single-column press - Manufacturer: DURENDUS - Press force: 5–20 T (adjustable) - Max. installation height: 550 mm - Table size: 700 × 920 mm - Crimping head: Ø 100 mm - Table height from the ground: 1,000 mm - Overall dimensions (WxDxH): 900 × 900 × 2,340 mm - Total weight: approx. 1,200 kg - T-slots: DIN 650 – 22 mm or accordin ...

1 Apple tool trolley for Trumpf bending tools with holders and 1 set of offset bending tools Trumpf OW200S L=2050mm Auction-ID: A1-46862-48

Press force: 175 tons maximum stroke of 400 mm Largest table: plunger spacing. 965 mm Hydraulic oil capacity: 230 L Note: Machine was completely rebuilt in 2015 with new control Mod EVa 12 S, cylinder was rebuilt and new hydraulic pump installed Condition: Used fully functional. Transport dimensions: 5400 x 2420 x 3200 mm (L/BH), including accessories. Tools: 1 set of straight punches 41 pcs. and 1 set of matrices, 7 pcs. 31.007.20 41 pcs. Auction-ID: A1-46862-1

Projection: 220 mm Clamping surface: 580 x 440 mm Width and depth Ram strokes: 110 1/min Stroke adjustable: 4-70 mm Table adjustable: 180 mm with double table spindle, including new built-in control from Müller and 1 x Kemeric type: 4 VAEK decoiler + double tool holder for original Trumpf tools. Auction-ID: A1-46862-22

Incl. a set of bending tools: - Punch W210/S Angle 28 Height = 240mm L=2050mm - Matrice 8 EV002 W8 L=2050mm Bending length approx. 2550 mm stroke approx. 365 mm Throat: approx. 420 mm Rapid traverse up to approx. 220 mm/s Working speed approx. 10 mm CNC axes Y1, Y2, X, R, Z1, Z2 Press force: 850 (kN) Increased Y closing speed: 14 mm, at die width: 16 mm Operating pressure: max. 300 bar Connected load: 17.0 kVA Transport dimensions: 3500 x 2400 x 2900 mm (L/W/H) Including: Accessories Auction-ID: A1-46862-5

Vertical stainless steel pressure tanks, Additional title: Vertical stainless steel pressure tanks, Capacity: 44070 l, Max. working overpressure: 3 bar, Length: 3100 mm, Width: 3100 mm, Height: 6300 mm, Material: stainless steel 1.4541 (AISI 321), Position: vertical

Vertical 6 bar stainless steel pressure tank with dished ends and various fittings and equipment., Additional title: vertical stainless steel tank, Volume: 10560 l, Max. working overpressure: 6 bar test pressure: 7,8 bar, Max. working temperature: 10 °C, Length: 1900 mm, Width: 1900 mm, Height: 4770 mm, Material: stainless steel 1.4301 (AISI 304), Position: standing on 3 pipefeet, Base construction: bottomed shells, Features: Cleaning air/valve combination, cleaning line, CIP spray head, manhole, hose level indicator, sampling tap, pressure gauge, bunging device, safety valve, vacuum flap

Two vertical stainless steel pressure tanks with jacket cooling and various fittings., Additional title: vertical, coolable stainless steel tanks, Max. content: 8578 l, Max. pressure: 3 bar, Width: approx. 1.9 m, Height: approx. 4.3 m, Material: stainless steel, Position: free-standing, Base construction: cylindrical tank with dished bottoms and square tube feet on domes, Features: Bunging apparatus, pressure gauge, 2 shell cooling zones, standpipe for content display, manhole, sampler and side inlet in the frame, automatic valve with temperature-control, central bottom outlet with shutting flap

Vertical 6 bar stainless steel pressure tank with dished ends and various fittings and equipment., Additional title: vertical stainless steel tank, Volume: 10560 l, Max. pressure: 6 bar test pressure 7,8 bar, Max. temp.: 10 °C, Length: 1900 mm, Width: 1900 mm, Height: 4770 mm, Material: stainless steel 1.4301 (AISI 304), Base construction: vertical tank with dished bottom and pipe feet, Features: Shell-manhole, level-display-hose, tank fittings: sampler, spray ball, bunging device, pressure gauge, safety valve, vacuum flap

Two vertical, partially insulated stainless steel pressure tanks., Additional title: vertical stainless steel tanks, Volume: 5000 l, Operating pressure: 12 bar, Operating temperature: 20 °C

Stainless steel pressure tank for approx. 10 hl net capacity; cooled by means of double jacket on the frame and firmly welded insulated., Additional title: coolable, insulated, clad, Gross content: 1122 l, Perm. working overpressure: 3 bar, Perm. working temperature: 20 °C, Content cooling zone: 5 l, Length: 1000 mm, Width: 1000 mm, Height: 1700 mm, Material: stainless steel, Features: Manhole in the frame, spraying head with spraying head line and shut-off flap DN 25, safety valve and manometer, outlet flap, thermometer Height-adjustable tube feet

Pressure tank with conical head and central outlet, additional tangentially mounted inlet/outle and manhole, upper dished head., Additional title: cylindroconical tank, Volume: 10000 l, Working pressure: 3 bar, Width: 2,3 m, Height: 4,3 m, Weight: 1000 kg, Material: stainless steel, Position: vertical, Base construction: on feet, Features: central outlet, additional tangential inlet/outlet, manhole

Pressure tank with two dished heads, central outlet and manhole., Additional title: Vertical stainless steel tank, Volume: 7366 l, Working pressure: 3 bar, Width: 1850 mm, Height: 3300 mm, Weight: 400 kg, Material: stainless steel, Position: vertical, Base construction: on feet, Features: central outlet, manhole, cleaning line, CIP spray head, 2-hole RLV, bunging device, pressure gauge, sampling tap, level indicator, discharge line with hand valve

Pressurised tank cellar with 4 upright 324 hl stainless steel pressure tanks and with double-seat valve solution on the operating level. The tanks are cooled using ice water., Additional title: coolable stainless steel pressure tanks, Volume per tank: 32400 l, Cooling surface/tank: 25 m², Perm. working overpressure: 3 bar, Systemic volume: 324 hl, Length: 2,5 m, Width: 2,5 m, Height: 7,4 m, Weight: 2585 kg, Material: stainless steel AISI 304, Features: Tank cleaning equipment with spray head, safety valve, pressure gauge, air valve combination; sampler, level indicator with valves, outlet valve , Periphery: Inlet and outlet pipework via double-seat valves

Pressure tank with two dished heads, central bottom outlet and two further lateral connections at different heights and manhole., Additional title: Vertical stainless steel tank, Volume: 10017 l, Working pressure: 3 bar, Test pressure: 4 bar, Length: 1,9 m, Width: 1,9 m, Height: 4,1 m, Weight: 850 kg, Material: stainless steel, Position: vertical, Base construction: on feet, Features: central lower outlet as well as additional side connection, manhole

Pressure tank with two dished heads, central outlet and manhole., Additional title: vertical pressure tank, Volume: 5090 l, Working pressure: 2 bar, Width: 1500 mm, Height: 3780 mm, Weight: 700 kg

Stainless steel brewing vessel as a wort kettle and whirlpool combination with an external boiler., Additional title: brew vessel from stainless steel, Total volume: 260 hl, Diameter approx.: 3 m , Diameter incl. insulation approx.: 3 m, Frame height: approx.: 2 m, Width: 3,4 m, Material: stainless steel 1.4301 (AISI 304), Base construction: on stainless steel pipe supports, ground pegged, Features: external boiler, conical hood stainless steel, D = 3200 mm), conical insulating hood (stainless steel outside diameter = 3400 mm), 2 outlets DN200 und DN100, manhole DN600, outlet vent (12000 mm), interior lighting

Additional title: Vertical tank, Capacity: 5244 l, Max. allowable operating pressure: 5 bar, Operating temperature: 20 °C, Width: approx. 1600 mm, Height: approx. 3200 mm, Material: Stainless steel 1.4541, Position: vertical, Base construction: 3 x feet, Features: Manway; safety valve; CIP piping

Insulated and clad stainless steel pressure tank with various fittings., Additional title: insulated tank, Capacity: 12800 l, Pressure: 4 bar, Temperature: 20 °C, Length: 5,1 m, Width: 2,1 m, Weight: 2000 kg, Material: stainless steel, Position: hozizontal, Features: insulated and cladded, outlet DN65, manhole, 2 spray heads