punch press used for sale

Offer 26051 Technical data: - Feed of the milling unit manually - Work table adjustable in height via handwheel - Horizontal and vertical material tension - Milling cutter diameter up to 300 mm - max. Milling height 150 mm - max. Milling depth 110 mm - max. Milling length 500 mm - Angle-adjustable stop Li + Re 20 - 90 ° - Milling spindle speed 2800 rpm - Drive 400 V 2.2 kw - Compressed air connection 6 - 8 bar - Air consumption per work cycle 10 l - Pneumatic profile clamping - Spraying device - Space requirement approx. W 1300 x H 1450 x D 1100 mm - Weight approx. 300 kg

Offer 26050 Univ. notching sawing machine Technical data: - Saw blade dimensions - vertical 400 x 3.5 x 40 mm - - horizontal 400 x 3.5 x 40 mm - Notching area / notch depth vertical 135 mm - Notching area / notch depth horizontal 105 mm - Notching width at 90° to 280 mm - Notching width at 30° to 100 mm - Vertical saw blade manual 90° - 30° swivel via handwheel - Use as a Schiftersäge without horiz. Saw blade possible - Profile stop shoulder can be swivelled 30° - 90° - 30° - Pneumatic material vise - Coolant spray device - Air connection 6 bar - Drive 400 V / 2 x 2.2 kW / 2800 rpm - Space requirement approx. W 2200 x H 1600 x D 1400 mm - Weight approx. 800 kg

Manufacturer: Presona Model: LP100 CH2S Year of Manufacture: 2008 Type of Machine : Bailing Press Press Force: 100 tons (1000 kN) Specific Press Force: 81 N/cm2 Max Oil Pressure: 25 MPa Feed Opening: 1650 mm (W) x 1100 mm (L) Bale Cross-Section: 1100 mm (W) x 1100 mm (H) Throughput Capacity: 660 m3/h Output at 30 kg/m3 bulk density: approx. 17-20 tons/h Output at 50 kg/m3 bulk density: approx. 20-24 tons/h Output at 100 kg/m3 bulk density: approx. 22-33 tons/h Drive Power: 2 x 45 kW Hydraulic Tank: 2000 litres Vertical Wire Tying: 5-fold Machine Weight: approx. 32 tons Color: RAL 5015 / RAL 1023 Included Equipment - Oil heater, large digit display, 10 wire frames, turbulator, adjustable support feet. - Applications - Plastic film baling - Paper and newspaper compacting - Cardboard and corrugated baling - Mixed recyclables processing - Waste management and recycling fac ...

General SKU004Y057 MakePressindustria S.p.A. TypeTE.3/SV/R/5 No.4302 Year of construction1983 LocationBarneveld Pressure Working pressure0.067 Bar Vacuum possiblecheck Working pressure jacket3 Bar Main Features MaterialStainless steel Volume7 Ltr. Motor0.55 KW Specified Features - Processing vessel MaterialStainless steel 1.4401 (316) Closed stirring vesselVacuum processing vessel (1x) Capacitymin. 3/max. 7 Ltr Vessel sizesdia. 250x250mm, Vessel can be lifted hydr. Dished bottomcheck Flat top sidecheck With covercheck With jacketcheck Max. temperature160 Degr. C. With anchor stirrerscraper stirrer Counter rotating stirrercheck Motor0,07/0,22 KW, 220 Volt (3 Ph) Speed mixing shaft3-60 Rpm With homogeniser(400-2000 Rpm) Motor0,2/0,55 KW Information With switchgearcheck Floorspace1,2x0,9 M Total height2,3 M Technical specs Extra informationVessel can be  ...

TECHNICAL SPECIFICATION   max. diameter of saw blade: 460 mm   cutting capacity round: 146 mm   cutting capacity square: 138 mm   mitre cutting: no   .. oblong: 250 mm   .. .. x: 100 mm   .. to: 220 mm/min DIMENSIONS / WEIGHTS   space requirements -left/right-: 2200 mm   space requirements -front/back-: 1950 mm   total height: 2000 mm   total weight approx.: 2700 kg High-performance automatic saw for cutting aluminium and non-ferrous metal profiles to length in 90° cuts. With feed conveyor and discharge / vibrating section and extraction system. - max. profile width / height to be processed: 250 / 148 mm - Min. profile width / height to be processed: 10 / 20 mm - Cut-off lengths from 10 mm - Saw blade motor 12/18.5 KW, S6 60%

Max. basket weight:50 kg Temperature for washing water:0-60 °C Electrical heating power:2 kW Rated power supply:230 V Machine size LxWxH:600x800x1650 mm Machine weight:90 kg DIMENSIONS DxWxH 600x800x1650 mm POWER SUPPLY 230 V DETERGENT water PUMP POWER 1.2 kW TANK CAPACITY 100 l LOAD CAPACITY 50 kg HEATING ELEMENTS POWER 2 kW HEATING TEMPERATURE 0-60° WORKTOP DIMENSIONS 750x550 mm WEIGHT 90 kg

General SKU232M159 LocationBarneveld MakeTop Industrie F-77 013 Vaux Le Penil Type1876 0000 Reactor cristallisation CO2 No.1449 Pressure Working pressure350 Bar Main Features MaterialStainless steel Volume0.1 Ltr. Motor0.25 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity0,094 Ltr Vessel sizesdia. 114x145mm With jacketcheck Max. temperature150°C Motor0,25 KW, 400 Volt Stainless Steel Reactors MaterialStainless steel 1.4404 (316L) Information Year of construction2007 Mounted on legsin framework With switchgearcheck Floorspace1,0x0,6M Total height1,0M Weight130 KGStainless Steel ReactorsCatalysts & fillersSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsLubricants & oleoSolid pharmaceuticsDyes & pigmentsAPIMinerals & inorganicPlastic & polymersAgrochemicalsRubberOther chemicalFine chemicalsOintmentsGeneric medicinesPaints & coat ...

General SKU001A039 MakeUHDE Hagen No.2578 Year of construction1978, Internal coil built in 1991 Mounted on legscheck Pressure Working pressure300 Bar Main Features MaterialStainless steel Volume20 Ltr. Motor0.55 KW Specified Features - Stainless Steel Reactor ReactorHigh pressure Capacity20 Ltr Vessel sizesdia. 215x600mm Dished bottomcheck Dished top sidecheck With jacket/Electric heating Internal heating spiral(0,8 Ltr) Max. temperature350 Degr. C. With anchor stirrercheck (built in 1991) Motor0,55 KW, 220/380 Volt (Ex) Speed mixing shaftvariable (± 155-1120 Rpm) Stainless Steel Reactors MaterialStainless steel 1.4306 (304L) Information LocationBarneveld Floorspace0,9x0,9 m Total height2,2 m Weight850 kg Extra Specifications- Vessel does not have a bottom outlet Stainless Steel ReactorsCatalysts & fillersSolventsDiscountDetergent & surf.Other pharmaceuti ...

General SKU209W119 MakeHaagen & Rinau No.301015/4 Year of construction1998 LocationBarneveld Specified Features - Pressure vessel Material finishPolished inside Pressure Working pressure3 Bar Vacuum possiblecheck Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume300 Ltr. Pressure3 Bar Vacuumcheck Pressure vessels MaterialStainless steel 1.4435 (316L) Notified bodyTÜV Capacity300 Ltr. ( bruto 380 ltr) Vessel sizesDia. 740x997 mm Dished topcheck Dished bottomcheck With covercheck Manholecheck DN400 Top connectionscheck OutletDN40 Max. temperature143°C Information Mounted on consolesOn wheels Floorspace0,95x1,15 m Total height2,0 m Weight360 kg Extra Specificationswith spray ball. inspection window in mannhole. SolventsDetergent & surf.CosmeticsDyes & pigmentsAPIMinerals & inorganicPlastic & polymersAgrochemicalsBiotechnology ...

General SKU039E129 MakeRichard Stihler No.5057 Year of construction1963 Mounted on legscheck Pressure Working pressure2 Bar Vacuum possiblecheck Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume4480 Ltr. Pressure2 Bar Vacuumcheck Specified Features - Pressure vessel MaterialStainless steel 1.4571 (316Ti) Capacity4480 Ltr Vessel sizesdia. 1800x1200mm Dished topcheck Dished bottomcheck Manholedia. 500mm Top connections(6x) Outletdia. 100mm Max. temperature50 Degr. C. Information LocationBarneveld Floorspace1,8x1,8 M Total height2,8 MDiscountPressure vesselsRichard StihlerDiscountTanks > Pressure vesselsBrand > Richard Stihler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barnevel ...

General SKU011U240 MakeHanag AG Oberwil No.111094 Year of construction1995 LocationBarneveld Pressure Working pressure16 Bar Vacuum possiblecheck Working pressure jacket16 Bar Vacuum possible jacketcheck Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume3560 Ltr. Pressure16 Bar Vacuumcheck Specified Features - Pressure vessel MaterialStainless steel 1.4435 (316L) Capacity3560 Ltr Vessel sizesdia. 1200x2600mm Dished topcheck Top connections4x dia. 80mm Outlet2x dia. 80mm + dia. 100mm + dia. 200mm Max. temperature-30/+120 Degr. C. Half coil jacketed(80 Ltr) Information Weight1900 KGDiscountPressure vesselsHanag OberwilDiscountTanks > Pressure vesselsBrand > Hanag Oberwil What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You ar ...

General SKU011U177 MakePaul Schwingel No.8183-3 Year of construction1986 LocationBarneveld Pressure Working pressure3.2 Bar Vacuum possiblecheck Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume23120 Ltr. Pressure3.2 Bar Vacuumcheck Specified Features - Pressure vessel MaterialStainless steel 1.4571 (316Ti) Capacity23.120 l Vessel sizesdia. 2400 x 4000mm Dished topcheck Dished bottomcheck Manholedia. 600mm Top connections6x dia. 100mm + 2x dia. 150mm Outletdia. 150mm + dia. 100mm Max. temperature65 °C Information Floorspace2,8 x 2,8 m Total height5,5 m Weight4800 kgDiscountPressure vesselsPaul SchwingelDiscountTanks > Pressure vesselsBrand > Paul Schwingel What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome  ...

General SKU082C465 MakeEisen- und Hüttenwerke Thale AG No.60 6731 Year of construction1996 LocationBarneveld Material Lining materialGlass - Enamel Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Number of vertical pressure tanks1 Main Features MaterialGlass Volume2350 Ltr. Pressure6 Bar Vacuumcheck Specified Features - Pressure vessel Capacity2350 Ltr Vessel sizesdia. 1400x1200mm Dished topcheck Dished bottomcheck Manholedia. 500mm Top connections(5x) Outletdia. 80mm Max. temperature200 Degr. C. With jacket(300 Ltr) Information Floorspace1,6x1,6 M Total height2,5 M -- VESSEL HAS NEVER BEEN USED -- Weight2150 KGDiscountPressure vesselsThaleDiscountTanks > Pressure vesselsBrand > Thale What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Rea ...

General SKU065Y550 MakeFIB Leeuwarden No.1326-05 Year of construction1982 LocationBarneveld Pressure Working pressure5 Bar Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume1200 Ltr. Pressure5 Bar Specified Features - Pressure vessel MaterialStainless steel 1.4401 (316) Capacity1200 Ltr Vessel sizesdia. 1000x1100mm Dished topcheck Dished bottomcheck Manhole/hand hole dia. 200mm Top connections4x dia. 25mm + dia. 65mm Outletdia. 80mm Max. temperature100 Degr. C. With paddle stirrermake Veenstra, type FR-200 Motor2,0 KW, 220/380 Volt (Ex) With variable speed drivecheck Information Floorspace1,5x1,5 M Total height3,3 M ATEX compatiblecheckDiscountPressure vesselsFib LeeuwardenDiscountTanks > Pressure vesselsBrand > Fib Leeuwarden What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new ...

Punching units, punching unit, punching bracket, punching tool, non-driven clinking and shearing units, forming bracket -Manufacturer: Raskin, punching bracket type 25 BL 160 -Throw: 110 mm -Punching capacity: 3mm -Matrix: Ø 43 mm -Dimensions: 225/60/H150 mm -Weight: 6.6 kg

With foot control including various molds, tooling and documentation

Punching tool with Linar built-in punching brackets ABS-SCHWABE type 100/16011 piece Punching bracket, punching unit for press brakeYear of construction approx. 1990Throat: 160 mmPunching capacity: 0.3 to 5 mm Material thicknessHole diameter: 2 to 7 mmInstallation height: 203 mm (only the punching bracket individually with punching tool)Installed is a round hole tool ø 5 mmPunching bracket distance: 195 mm- the tool unit was mounted on a hydraulic press brakeDimensions punching bracket base plate L x W x H: 2500 x 345 x 37.5 mmDimensions of punching bracket printing plate L x W x H: 2500 x 173 x

Punching units, punching unit, punching bracket, punching tool, non-driven clinking and shearing units, forming bracket -Manufacturer: Raskin, punching bracket type 15 BL 245 with punching tool -Throat: 210 mm -Punching capacity: 3mm -Matrix: Ø 34 mm -Punching tool: Ø 10 mm -Dimensions: 320/45/H150 mm -Weight: 6.8 kg

Punching units, punching unit, punching bracket, punching tool, non-driven clinking and shearing units, forming bracket -Manufacturer: Raskin, punching bracket type 25 BL 260 with punching tool -Throat: 210 mm -Punching capacity: 3mm -Matrix: Ø 42 mm -Punching tool: Ø 18 mm -Dimensions: 330/60/H150 mm -Weight: 9.4 kg

Single column hydraulic press, straightening press, punching bracket ECKOLDPressen frame with hydraulic cylinder, mobile press, punching unitType RSD 1500 - 125Masch. No. 317 / 690 Year of construction approx. 1986Compressive force 150 ton. Projection 125 mmSlide stroke 35 mmTable size 280 x 210 mmPlunger area 125 mmInstallation height (plunger to table) max. 265 mmTable height above floor 403 mmHydraulic operating pressure max. 500 bar- without hydraulic unit- Lifter surface with 4 threads M16 and 20 mm guide groove, one centering hole in the middle 15

Extension / distance slide center to frame: 320 mm Sheet thickness / sheet thickness: 3.2 mm Cutting surface / cutting capacity: 1600 mmx2 Distance table pestle/ distance table slide: 417 mm Stroke adjustment / adjustment of stroke: 16...125 mm Stroke number/ number of strokes: 45 / min Pestle adjustable/adjustment of slide: 80 mm Table size / surface of bed: 800 x 630 mm Bumper size / surface of ram: 500 x 400 mm Slope of the stand / inclination of coulmn: 25 Power of main motor power: 4 kW Weight: 2.5 Specification: C-frame punching press, used

Eccentric C stand press, little used C frame - eccentric press, used Type: PED 63.3 S4 manufacturer: WMW Year of construction: 1994 Pressing power / rated pressure: 63 t Sheet thickness / material thickn. 3.2 mm Table size / surface of bed: 800 x 580 mm Hole in the table / hole in table: 300 mm diameter. Stroke / stroke of slide: 8... 120 mm Number / number of strokes: 56 / 90 / min Tappet adjustment / adjustment of slide: 70 mm The maximum distance between Table and plunger / max distance between table and slide: 560 m Projection / Cap: mm Power of main motor / power of main motor: 6 kW Weight / weight: 5.5 t

With the universal hand punch NPR-20 can both on the front page as also Center of the punch be punched, so may here A4 sheet at any point are processed. The punch is suitable for cutting of printed materials in the Office, in the printer or in the copy shop. With a Nutmesser can A4 sheets are grooved. The NPR-20 is suitable for all cutting work, which can be with the NPR-10 through out. A countertop if necessary Additionally facilitates the stamping work

Schuler PE4s 50/800 High Speed Press Manufacturer: Schuler Type: PE4s 50/800 High-speed press 61/21 600/3 Pressing force: 50 t Projection: 800 mm Stroke rate /min: 125-300 Plunger stroke: 40 mm Kohler unwinding reel 500.1 M We sell a large number of paternosters. The devices are in operation until 30.06.2021. After the purchase, there are also the documents for it From 01.07.21 the devices are ready for collection. Dismantling and transport by the buyer. Location is Hildesheim The dismantling, loading, as well as transport can alternatively be offered by us. In addition to about 50 paternosters, countless other machines are available. After purchase, the amount is due within 7 working days. Please also note our other offers. Have fun browsing and buying.

With the universal hole punch NPR-20 can both on the front page as also Center of the punch be punched, so may here A4 sheet at any point are processed. The punch is suitable for cutting of printed materials in the Office, in the printer or in the copy shop. With a Nutmesser can A4 sheets are grooved. The NPR-20 is suitable for all cutting work, which can be with the NPR-10 through out. A countertop if necessary Additionally facilitates the stamping work.

Printing capacity max. 300 t, table 1500 x 1000 mm, stroke max. 500 mm

Universal - NPR-55U Stanze Knee lever punch -Punching of paper, cardboard and plastics. -for simple stamping -The cutting blades can be recorded from the shaft -The cutting blades can be created also not attached just under the pressure plate. -The pictured tools are not part of the offer.

Capacity 100 ton Table 880x715 mm Max. sheet thickness 3 mm Stroke per min. 360 Stroke 25 mm Ram adjustment 70 mm Distance Ram-table 400 mm 15 kW Dimensions LxWxH 3300x1600x2600 mm Total weight 10 tons

Used SMG HZPUX 350/200 - 1500/1300 moulding press in good condition! Main technical data: - Power: 510 ton - Maximum span with castle: 1460 mm - Minimum light with castle: 520 mm - Maximum span without castle: 2160 mm - Minimum light without castle: 1220 mm

Universal stamping machine Max impact power 50 KN Total stroke 80 mm Stroke sequence per hour 1500 Pneumatic Data

Type 210 standard 13 Shear: 13 mm Flat steel: 150 x 16 mm Punching:nbsp; example: dia 25 in 16 mm Stroke: 27 mm 50 ton Notching: 12 mm L/T steel: 80 x 10 mm U steel: 140 mm I steel: 160 mm round bar steel: 42 mm square bar steel: 38 mm L-profile 90°: 110 x 10 mm L-profile 45°: 90 x 9 mm Punching pressure: 50 ton Power needed: 3 kW Length: 1270 mm Depth: 800 mm Height: 2180 mm Weight: 2 ton

Punching press with coil and strip bar processing Manufacturer: HMS Model: EWZ 03 Year of Manufacture: 1990 Type of Machine: Punching Line Operating Voltage : 380 V Find more here - / Contact us at -

Punching force: 40t, working range: 1500mm/900mm, max. sheet thickness: 4mm, dimensions X/Y/Z: approx. 3700mm/1700mm/1900mm, weight: approx. 2500kg. Including various stamps.

Three Illig punching machines are available for the precise punching of thermoformed plastic parts from film material. Working width: approx. 900mm, working height: approx. 120mm, roller diameter: approx. 196mm, machine dimensions X/Y/Z: approx. 2500mm/1300mm/1600mm, weight: approx. 750kg. Including two hydraulic punching machines Wolf EHPT 6E and two manual swivel arm punching machines. On-site inspection is possible.

L-profile: 120 x 120 x 10 mm flat steel: 300 x 15 mm round/square steel: 40 mm punching: dia 28 x 13 mm U/I-profile: 100 mm

hydraulic: ja : 100 t weight of the machine ca.: 2,9 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Single column - eccentric press WEINGARTEN type ERV 40Masch. No. 537 / 65 Year of construction 1965Compressive force 40 ton. Projection 230 mmTable size 570 x 470 mmPlunger area 250 x 200 mmClamping pin hole 40 mmInstallation height max. approx. 520 mmStroke adjustment 8 - 88 mmPlunger adjustment range 63 mmStroke rate 70 strokes per minuteDrive power 3 kWNetz connection 380 volts, 50 Hz- Table height adjustment- Overload protection by crushing plate- Clutch-brake combination by WEINGARTEN friction threaded coupling-

Single column - eccentric press WEINGARTEN type ER 63Masch. No. 52A / 63 Year of construction 1963Pressure capacity 63 ton. Projection 280 mmTable surface 630 x 530 mmAdjustable plunger stroke 8-100 mmPlunger adjustment 63 mmStroke rate 65 strokes / min. Engine power 4 kWNetz connection 380 Volt, 50 Hz- Clutch-brake combination by WEINGARTEN friction threaded clutch- Electrical stroke release via foot switch- Wheel counters- Overload protection by crushing plate- Front crankshafts Support bearingSpace requirement L x W x H 1500

Single column - eccentric press PELS - RICHTER type PEKR 125Masch. No. 20684 Year of construction 1967Compressive force 125 ton. Projection 430 mmTable size 1100 x 750 mmPlunger area 890 x 650 mmTable opening 400 mmStroke adjustment 6 to 115 mmRam adjustment 100 mmInstallation height largest stroke top max. 450 mmClamping pin bore 50 mmStroke rate 60 strokes/min. Table height above floor 900 mmMotor power 7.5 kWNerg connection 380 volts, 50 Hz- overload protection by crushing plate in the plunger- compressed air

Single-column eccentric press MÜLLER GEFREES type PDET 5 S/EKMasch. No. Year of manufacture 1988Compressive force 5 ton. Projection 125 mmColumn passage 170 mm Table surface 280 x 220 mmWaste height 90mmLifting area 160 x 100 mmLifting adjustment 4 to 40 mmRam adjustment 30 mmInstallation height largest stroke at the top max. 210 mmStroke rate 200 strokes/min. Clamping pin bore 25 mmTable height above floor 900 mmEngine power 0.55 kWNerg connection 380 volts, 50 Hz- pneumatic clutch-brake combination-

Single-column eccentric press WEINGARTEN type E 40Masch. No. 643/62 Year of construction 1963Pressure capacity 40 ton. Projection 250 mmTable opening 150 x 80 and 200 mmTable area 560 x 460 mmPlunger area 250 x 200 mmPlunger stroke adjustable 8-88 mmPlunger adjustment 63 mmInstallation height 320 mmPin hole 40 mmStroke rate 100/130 strokes / min. Motor power 2.2 / 3 kWNetz connection 400 volts, 50 HzTable height above floor 840 mm- Clutch-brake combination by WEINGARTEN friction threaded coupling with TDC

Met elektrische achteraanslag Ponscapaciteit: 70 ton Dia x plaatdikte: Ø 28 x 20 mm Maximale slag: 80 mm 40 str / min Keeldiepte: 300 mm Werkhoogte: 1065 mm Maximale snijdikte in plaat: 20 mm Bladlengte: 455 mm 90°-snede: 130 x 130 x 13 mm 45°-snede: 90 x 90 x 10 mm Op maat gesneden rond/vierkant: 45 mm Elektromotor (vermogen): 7,5 kW Lengte: 1800 mm Diepte: 1200 mm Hoogte: 2000 mm Gewicht: 1650 kg

Punching force: 500kN, throat depth: 610mm, stroke: 60mm, max. hole diameter in steel thicknesses 15mm/9mm/4.5mm: 30mm/50mm/100mm, max. material thickness: 15mm. Machine dimensions X/Y/Z: approx. 1100mm/1550mm/1750mm, weight: approx. 1650kg. An on-site inspection is possible.

Pressing force: 800kN, max. tool installation height: 380mm, max. upper tool weight: 300kg, stroke adjustment: 8mm-140mm, ram height adjustment: 100mm, stroke rate: 100/min, throat depth: 350mm, table dimensions X/Y: 850mm/670mm, ram area: 550mm/400mm. Machine dimensions X/Y/Z: approx. 2250mm/1550mm/2750mm, weight: approx. 9000kg. The machine was completely overhauled by the manufacturer in 2016 (retrofit). In 2024, the clutch, rotary union, press safety valve, and hydraulic oil cooler were replaced. In 2021, the drive motor and belt for the flywheel were converted to frequency-controlled speed. Documentation available. An on-site inspection is possible.

Offered is a Kocher + Beck rotary die cutter/rotary die cutting technology. SKK: scale front stop 5, scale on cylinder 9, 10bar, Mini B (pressure downward): scale front stop 11, scale on cylinder 5, 20bar, Memobox carton: scale front stop 3, scale on cylinder 11, 40bar, Memobox insert: scale front stop 5, scale on cylinder 5 & 2mm, 10bar. Inspection by appointment possible.

A shoe cutting press from Deutsche Vereinigte Schuhmaschinen (DSGV-/USM Group) is available. Press force: 25t, table dimensions X/Y: 900mm/450mm. Machine dimensions X/Y/Z: approx. 1000mm/800mm/1250mm, weight: approx. 300kg. An on-site inspection is possible.

This Finn-Power X5 was manufactured in 2006. A robust punching machine with a machine weight of 10500 kg and a punching force of 250 kN. It operates at a maximum working pressure of 300 bar. Ideal for those looking to buy this Finn-Power X5 punching machine. Contact us for further details.

This Durma TPL93 turret punch press was manufactured in 2019. Its a robust choice for precision punching operations. Consider the opportunity to buy this Durma TPL93 turret punch press. Contact us for more information.