We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,106 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
1250 x 2500mm TLF 2000w Laser STOPA Sheet storage, SheetMaster, ToolMaster, SortMaster Year: 2005
used
Very good heidelberg cylinders sbg 77x56
used
Capacity 30 tons Discharge 1000mm Repacking up to 10000mm Including chest of drawers with lots of tools and multi-tools
used
Double stand punching machine Control: UNIDOR Pressing force: 100 to. Stroke rate, continuously variable via PIV gearbox: 50 - 200 H/min. Table area: 1200 x 710 mm. Plunger area: 900 x 500 mm. Plunger stroke: min. 6 mm, max. 82 mm. Tappet adjustment: 100 mm. Distance, table - plunger: 387 mm. Diarrhoea opening in the press table: 120 x 400 mm. Incl. roller feed, type: WE 16, 130 x 3 mm. Weight: approx. 13500 kg. Abm. WxDxH: 2700 x 2400 x 3500 mm. Good operational condition. Freely loaded from location. The machine was demonstrably overhauled in 2021 for EUR 21,000.00. The machine can be inspected and demonstrated under power in consultation and is immediately available.
used
Punching machine X5 Manufacturer: FINNPOWER YEAR: 2006 Desktop... 2530x1270mm Nominal pressing force... 056 Axis X ... 2584mm Axis Y ... 1317mm thickness of the cut material ... 8mm Magazine slots ... 20 Control Fanuc ... Oi-PC Machine weight ... 10500kg L x W x H ... 7600x6980mm The machine is in good condition, possible to test under power.
used
sheet width:400 mm plate length:500 mm plate thickness:4 mm total power requirement:0,5 kW Punching and Nibling machine with 6 x 3 mm nibling and 4 mm for cuting
used
- Trumalift Sheetmaster Loading and Unloading Device - Simultaneous positioning speed (X / Y): 90 / 60 m/min - Number of turret stations (pcs): 19 - Control type: Basis BOSCH Type 3 - Simultaneous positioning speed (X / Y): 108 m/min - Punching speed (Hit speed max.): 420 (25 mm) 1/min - Punching speed (Hit speed max.): 900 (1 mm) 1/min - Working area max: 2.540 x 1.270 mm - Punching force: 180 kN - Punch diameter max: 76 mm - Max. workpiece weight: 150 kg - Power: installed max: 9 kW - Dimensions (long x wide x high): 6.710 x 7.310 x 2.438 mm - Weight: 11.500 kg
used
air pressure:8 bar Air consumption:NI 18 l/min. weight:110 kg dimensions of the machine ca.:700 x 300 x 1000 mm
used
- Working pressure: min 6 - max. 7 bar - Machine weight: 170 kg - Space requirement (W x D x H): 0.55 x 0.55 x 1.4 m - Condition: very good Details for profile WICONA, system WICLINE 50E - 50EN, 60E, CODE:332.04.10 from vocational school, was hardly in use, as good as new
used
Unloading: 310mm
used
Label book printing machine, 4 colors, 3 colors, 2 colors or 1 color, punching unit, 2 embossing plates, various mounting plates, laminators, UV dryers, dispensers, slitter rewinders, scanner camera, in good condition, immediately available
used
Back punching machine Schmedt Präcut HHS 65; good condition; cleaned and tested; Block height max.350mm; Block thickness max.90mm; 3 replacement knives. Book block spine machine Schmedt Präcut HHS 65; good condition; cleaned and checked; max.block hight 350mm; max.block thikness 90mm; three knifes.
used
Label book printing machine Labelmen PW180DLU, YOC 1996, 4 colors, punching unit, embossing device, various mounting plates, laminators, UV dryers, dispensers, Slitten rewinders, in good condition, immediately Available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.
used
equipped with pneumatic clamping; 1 ELCO EM 14 control box
used
Working hours machine: 46115 h Max. punching force: 180 kN Working range punching: 2500 x 1250 mm mm Control: Bosch MTX CMP 70 Max. sheet thickness: 6,4 mm Length: 6500 mm Width: 6000 mm Height: 2252 mm Machine weight: 9800 kg Electrical connected load: 18 kVA
used
Working hours machine: 36101 h Max. punching force: 200 kN Working range punching: 2000 (4000) x 1270 mm Control: Fanuc 18-P Length: 6190 mm Width: 5000 mm Height: 2450 mm Machine weight: 12000 kg
used
Set of tools included - Operating hours: 40.000 - Number of turret stations (pcs): 31 - Simultaneous positioning speed (X / Y): 89 m/min - Number of index tool stations, max: 3 - Tool rotation, max: 35 r/min - Control type: Fanuc 18P - Power supply: 25 kVA - Punch diameter max: 88,9 mm - Max. workpiece weight: 100 kg - Working area max: 2.540 x 1.270 mm - Punching force: 200 kN - Material thickness max: 6,4 mm - Compressed air consumption max: 4,16 l/s - Dimensions (long x wide x high): 5.030 x 2.630 x 2.160 mm - Weight: 9.200 kg
used
Working hours machine: 61.000 h Laser power: 4000 Watt Max. punching force: 300 kN Control: AMNC-F Working range laser: 2500 x 1525 mm Working range punching: 3050 x 1875 mm Length: 6354 mm Width: 5880 mm Height: 2517 mm Machine weight: 30000 kg Electrical connected load: 85 kVA x-axis: 100 m / min y-axis: 80 m / min simultanes (x and y): 128 m / min
used
used
TRUMPF TRUMATIC 600L Work area: 3000 x 1600 mm. Hours: 29.000
used
Punching force: 630kN, stroke adjustment: 10-80mm, ram adjustment: 80mm, stroke speed: 65-400/min, connected load: 11kW, length: 1590mm, width: 1650mm, height: 3000mm, weight: 9.5t, with documentation.
used
Max. stroke speed: 600-2000/min, feed: 10-80mm, with oil cooler.
used
Including documentation, tools, lubricants and roller tables.
used
Including accessories and documentation.
used
With dual stroke, max. punching force: 40t, stroke: 30-60mm.
used
Max. punching force: 40t, stroke: 10-50mm, the automatic lubrication needs overhauling.
used
Max. pressing force: 30t, stroke speed: 100-600/min, stroke adjustment: 8-40mm, length: 1200mm, width: 1160mm, height: 2150mm, weight: 2.5t.
used
Max. pressing force: 30t, stroke speed: 100-600/min, stroke adjustment: 8-40mm, length: 1200mm, width: 1160mm, height: 2150mm, weight: 2.5t.
used
Max. pressing force: 30t, stroke speed: 100-600/min, stroke adjustment: 8-40mm, length: 1200mm, width: 1160mm, height: 2150mm, weight: 2.5t.
used
Max. pressing force: 30t, stroke speed: 100-600/min, stroke adjustment: 8-40mm, length: 1200mm, width: 1160mm, height: 2150mm, weight: 2.5t.
used
Max. pressing force: 30t, stroke speed: 100-600/min, stroke adjustment: 8-40mm, length: 1200mm, width: 1160mm, height: 2150mm, weight: 2.5t.
used
Max. pressing force: 30t, stroke speed: 100-600/min, stroke adjustment: 8-40mm, length: 1200mm, width: 1160mm, height: 2150mm, weight: 2.5t.
used
Max. pressing force: 30t, stroke speed: 100-600/min, stroke adjustment: 8-40mm, length: 1200mm, width: 1160mm, height: 2150mm, weight: 2.5t.
used
Punching capacity: 300kN, max. sheet dimensions: 1270x3660x6,4mm, max. table load: 100kg, connected load: 35kVA, length: 3778mm, width: 4601mm, height: 2245mm, weight: 13.5t.
used
Max. pressing force: 250kN, stroke: 13-38mm, stroke speed: 875-1500/min, connected load: 20kW.
used
Pneum. Multifunctional punch Fabr. SCHÜCO type 296 407 234 907 0408 A1Serial no. 45843 year 1998Air pressure: 6 barAir consumption: 18 lWeight: 100 kgDimensions approx: 800 x 400 x 1100 mmWith- Footswitchvery little used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Nominal punching force: 60t, stroke speed: 60-200/min, tool installation height: 240mm, ram adjustment: 50mm, max. strip width: 250mm, max. strip thickness: 3.5mm, max. tool length: 600mm, with documentation, was maintained regularly, the machine has been idle for five years
used
Pressing force: 160kN, stroke speed: 200-1000/min, with automatic handling/ infeed and documentation.
used
Pneum. Multifunctional punch Fabr. SCHÜCO Art.-No. 296346Machine -No: 24749 Year 1994Pressure rating: 6 - 8 barAir consumption: 9 l / strokeDimensions: 885 x 380 x 1250 mmWeight approx .:112 kgWith- Footswitch- on standusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Pressing force: 40t, stroke adjustment: 13-57mm, ram adjustment: 60mm, stroke speed: 60-1200/min, connected load: 15kW, weight: 6t, with documentation, an inspection is possible.
used
Max. punching force: 240kN, working area: 1250-2500x550-1100mm, weight: 3.5t, available die diameter round: 3.1/ 4.1/ 4.2/ 5.2/ 6.5/ 8.2/ 10/ 11/ 12/ 13/ 16/ 17mm, longitudinal: 9x16/ 9x20mm, with documentation, an inspection is possible.
used
Machine was completely rebuilt electrically in 2008 and equipped with a new control cabinet, all accessories are included, without conveyor belt or material dispenser, the machine is ready for use, an on-site inspection is possible.
used
Pneumatic punch, make ELUMATEC type ST 225Masch. -No: 20111 year of construction 06/1990Technical specifications:Ram stroke: 40 mmRam force at 10 bar: 6000 KpInstallation height: 146 mmCompressed air connection: 10 barThroat: 75 mmAir consumption per stroke: 9 lTable surface: 280 x 215 mmWaste hole: 60 mmExternal dimensions: 500 x 570 x 1301 mmWeight approx: 60 kgWith- foot switch- many changing toolsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Pneumatic punching machine make PRESSTA EISELE type KST 120Machine -No: 5161 built in 1991Technical specifications:Ram stroke: 40 mmRam force: 60 kNInstallation height tools: 250 mmProjection: 110 mmTable area: 200 x 150 mmPower transmission: 10Dimensions: 280 x 1480 x 425 mmWeight approx: 140 kgwith- underframe- 5 punching toolsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Hydraulic pressure: 200 bar, with documentation and length stop, on-site inspection is possible, was used for cutting steel reinforcement pipes for plastic profiles to length, the machine has currently been standing under cover in an outdoor storage facility for two years, the linear guides are affected by rust film, a function test cannot currently be carried out.
used
Punching force: 6t, ram stroke: 16mm, flywheel rotational speed: 325-720/min.
used
Clamping surface: 1700x950mm, table dimensions: 600x200mm, feed: 600mm, length: 3500mm, width: 2200mm, height: 1150mm, shafts front side: 5 each top/bottom, including 7x slides, 2x welding control DTW 1Z1P, 2x resistance welding unit ET 15.1/15kVA power, without documentation, an on-site inspection is possible.
used
Hydraulic punch pliers make ECKOLD type ML 10/25Make -No: 1389/2657, year of construction 1993designed and coordinated for re-punching the bent sheet metal overhangson air duct flangesTechnical specifications:punch pliers:Max. pressing force: 3 Mpdesigned for hole diameter: 9.5 mm in 1.0 mm VAhorizontal tool throat: 25 mmused in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Hydraulic punching machine make PEDDINGHAUS type 225 H 13Fabr. -No: 818C004 built in 1975Punching force: 50 tProjection: 370 mmStroke: 60 mmOil content: 120 lStrokes per minute: 34punches: 25 in 16 mmor: 20 in 19 mmDrive power: 10 hpDimensions: 2230 x 860 x 1680 mmWeight approx:1,0 tWith- several stamps and diesused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Punching press Fabr. RASHIN type 225/20Punch diameter max.: 20 mmProjection: 225 mmWith- Support and notice tableusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools