punch press used for sale

Stock Number: 3819 Profile Steel Shears - Hole Punching Machine Manufacturer: MUBEA, Type: KBLH 550 Machine NO.: 0157887125599, Year of manufacture: 0 Specifications: Gr. Druckl 50 To Max. hole punching dia. 30 x 15 mm Stroke length 0-60 mm Projection 410 mm Flat steel 400 x 10 / 180 x 20 mm Angle steel 50 mm Length: 1400 mm, Height: 1800 mm, Width: 800 mm, Weight: 1800 kg

HEIDELBERG OHT SNR: 133501N YEAR: 1961 SIZE: 26 X 38 CM EQUIPMENT: CHASES (2) - HEIDELBERG PRINT-AUTOPLATEN - SHEET FORMATS MIN 40X70MM / MAX 260X380MM - PRINT-/ CUTTING FORMAT MAX 260X350MM - MAX SPEED = 5.500 SPH - EQUIPPED WITH INK UNIT - OIL DRIP TRAY - WEIGHT = 1.100 KG - W168 X D124 X H158CM - 380V/400V - 50HZ - 1.3 KW

380 V working width: 800 mm

GBC Magna Punch Pro Heavy Duty Electric Desktop Punch Multifunction Punch Working Width 400mm 220V with Renz Binder PBS 340

Offer 23293 Specifications: - Printing capacity 300 KN - punches e.g. up to 30 mm Ø in steel 9 mm - or with special punching device up to 100 mm Ø in steel 2.5 mm - Infinitely adjustable stroke 0 to 28 mm - Stroke rate 26 to 36 1/min - Projection 610 mm - Installation height 240 mm - Drive 400 V / 4 kW - Space requirement approx. W 750 x H 1650 x D 1350 mm - Weight approx. 1300 kg - With: - Foot switch - Grain detection device, - Support table with foldable stops W 1100 x D 850mm - Sliding paths of the stops from the center of the punch - Width between Li and Re approx. 470 mm x D 510 mm

Key data: 22 kN, 6 mm, 3000 mm

TC500 built in 1998 and 1999 2x available Partially overhauled with tools Working area y160 x3000 Bosch control system with graphics programming Tool changer 21 stations (with multitool up to 60) Further service by us BST - Punching machines possible Invoice with VAT Phone Support at BST - Finnentrop (Sauerland) Attention, with us you not only buy a good tested machine, but also the right service

Key data: 22 kN, 6 mm, 2500 mm

TC500 YOC 19995 Partially overhauled with tools Working area y1300 x2500 Bosch control system with graphics programming Tool changer 20 stations (with multitool up to 60) 2X available 1x1995 and 1X1993 Further service by us BST - Punching machines possible Invoice with VAT Phone Support at BST - Finnentrop (Sauerland) Attention, with us you not only buy a good tested machine, but also the right service

Key data: 18 kN, 4 mm, 2000 mm

TC120YOC 1992 Partially overhauled with tools Working range y1000 x2000 with resetting Bosch control system with graphics programming Tool changer 9Stations /2Claws Further service by us BST - Punching machines possible Invoice with VAT Phone Support at BST - Finnentrop (Sauerland) Attention, with us you not only buy a good tested machine, but also the right service

Key data: 24 kN, 6 mm, 2750 mm

TC260 YOC 1990 Partially overhauled with tools Workspace y1300 x2750 Bosch control system with graphics programming Tool changer 10 stations (with multitool up to 60) Further service by us BST - Punching machines possible Invoice with VAT Phone Support at BST - Finnentrop (Sauerland) Attention, with us you not only buy a good tested machine, but also the right service

Key data: 24 kN, 6 mm, 2750 mm

TC260 YOC 1990 Partially overhauled with tools Working area y1600 x2750 Bosch control system with graphics programming Tool changer 10 stations (with multitool up to 60) Further service by us BST - Punching machines possible Invoice with VAT Phone Support at BST - Finnentrop (Sauerland) Attention, with us you not only buy a good tested machine, but also the right service

Book spine punching machine Schmedt Präcut HHS 6501; good condition; cleaned and tested; Block height max.350mm; Block thickness max.90mm; 3 knives. Book block spine machine Schmedt Präcut HHS 6501; good condition; cleaned and checked; max.block hight 350mm; max.block thikness 90mm; three knives.

: gebraucht : 2001 : 9647 : prompt, Zwischenverkauf v : Italien : 32900 € : 1 : 30 to : 1250+N x 1000 mm mm : 1250 mm : 1000 mm : 40 m/Min : 30 m/Min : 50 m/Min : 30 mm : 730 1/Min : 300 1/Min : 980 mm : 4 kW : 115 l : 4000 mm : 2800 mm : 2800 mm : 4800 kg With 6-way multitool holder MTE6 (max. Dm. 24 mm) 2 Clamping claws Table with Brushes, table dimension 1970 x 2260 mm Foot pedal 2 pcs. additional single matrix holders PC with Euromac Software Eurowin 8.36 Max. Punching force 300 kN Automatic repositioning up to 10.000 mm Max. Punching diameter for single tool 88,9 mm, Max. Punching diameter Multitool Holder MTE6 Dm. 24 mm Max. Opening the clamping claws 7 mm Transport width: 2350 mm User Manual in english and italian CE declaration available WITH LARGE TOOL PACKAGE several pieces of each of the following dimensions: Round: Dm. 2,5/2,8/3/3,12/3,2/3,5/3,9/4,1/4/4,5/5/5,2/5,5/6/7/7,5/ ...

Section steel shears, profile shears, punch, punching machine, hole punch -Pressure force: 40 to -Punching -Scissors -to cut -notch -mechanical release -Foot switch: 1 -div. Punches and dies -Dimensions: 800/1250/H1800 mm -Weight: 1112 kg

Multifunctional punch, punch, hole punch, pneumatic hole punch -operated: pneumatic -Year of construction: 1998 -Type: 270164-1

Punching units, punching unit, punching frame, punching tool, non-driven latch and shear units, forming frame -Transfer in current condition as seen -1x: punching bracket as shown in the pictures -Manufacturer: CEWE -1x: type LWS 35-150 -Dimensions: 300/80/H220 mm -Weight: 13 kg

Multifunctional punch, punch, hole punch, pneumatic hole punch -operated: pneumatic -Year of construction: 1995

Punch, punching machine, punching device, hole punching machine, row punch, punching unit, Mehrkopfpstanze, punching system, -Distribution: 8 x punching pairs with a distance of 60 mm (O 4 mm) -Distance between the two outer punch pairs: 975 mm - Distribution: distance 75 - 165 - 165 - 165 - 165 - 165 - 165 - 75 mm -Max. Passage width: 1000 mm -Drive: electric -Weight: 260 kg

Punch, punching machine, punching device, hole punching machine, row punch, punching unit, multi-head punch, punching system, -Number: 5x punching -Max. Width: 1000 mm -Tool built-in: 8x45 mm -Distance punch: 187 mm -driven: electric -Weight: 280 kg

Multifunctional punch, punch, hole punch, pneumatic hole punch -Article No.: 296 566 -Weight: 170 kg

2 columns punching tool, cutting tool, punching tool, punch, punching die, punching die, column frame -Punching tool: 2 columns -Stroke: 40mm -Stamp: without accessories, see photos -Dimensions: 245/240/H240 mm -Weight: 30 kg

Punch, punching machine, hole punch, eccentric punch -Manufacturer: Peddinghaus, hole punch -Type: 225B/45 -Pressure force: 45 ton. -Punching performance: see photo nameplate -Projection: 360 mm -Accessories: incl. punching tool and 2nd table, see photos -Dimensions: 1540/700/H1510 mm -Weight: 1410 kg

Die cutter, hydraulic punch, punching machine, punching device, hole punching machine, in-line punch, punching unit, multi-head punch, punching line, punching frame, C-frame punching frame, punching press -Punching system: with hydraulic unit and two C-frame punching brackets -Hydraulic unit: Greenlee type 976-22 -Punch hanger: Greenlee NO. 1731 punch 2 pieces -Footswitch -Workbench: solid design, lockable drawers/doors -Accessories: including punching tools, see photos -Total dimensions: 1430/930/H1425 mm -Weight: 208kg

2 columns punching tool, cutting tool, punching tool, punch, punching die, punching die, column frame -Manufacturer: Fibro punch die pillar frame -Type: 201.31.056. Din 9822C 100x80 -Stamp: see photos -Dimensions: 340/160/H235 mm -Weight: 23 kg

Die holder, notching tool, punching tool, punch, punching die, punching die, punching die -Manufacturer: Mubea, punch Ø 90 mm -Type: Mubea 90 holder Ø 50 mm -Total dimensions: Ø 90 x 115 mm -Weight: 3.4 kg

Die holder, notching tool, punching tool, punch, punching die, punching punch, -Manufacturer: Mubea, punching tool square Ø 75 mm -Type: Mubea 75 5-9 holder Ø 50 mm -Die: Ø 150 mm -Total dimensions: Ø 150 x 120 mm -Weight: 6,6 kg

Die holder, notching tool, punching tool, punch, punching die, punching punch, -Manufacturer: Mubea, punching tool square Ø 55 mm -Type: Mubea 55 1-4 holder Ø 50 mm -Die: Ø 150 mm -Total dimensions: Ø 150 x 120 mm -Weight: 6,7 kg

Die holder, notching tool, punching tool, punch, punching die, punching punch, -Manufacturer: Mubea, punching tool square Ø 90 mm -Type: Mubea 90 5-8 holder Ø 50 mm -Die: Ø 150 mm -Total dimensions: Ø 150 x 116 mm -Weight: 6.7 kg

Die holder, notching tool, punching tool, punch, punching die, punching punch, -Manufacturer: Mubea, punching tool square Ø 55 mm -Type: Mubea 55 holder Ø 50 mm -Die: Ø 150 mm -Total dimensions: Ø 150 x 120 mm -Weight: 6,7 kg

Die holder, notching tool, punching tool, punch, punching die, punching punch, -Manufacturer: Mubea, punching tool square Ø 52 mm -Type: Mubea 52 holder Ø 50 mm -Die: Ø 150 mm -Total dimensions: Ø 150 x 125 mm -Weight: 6,8 kg

Die holder, notching tool, punching tool, punch, punching die, punching punch, -Manufacturer: Mubea, punching tool square Ø 70 mm -Type: Mubea 70 2 holder Ø 50 mm -Die: Ø 150 mm -Total dimensions: Ø 150 x 120 mm -Weight: 5,9 kg

Die holder, notching tool, punching tool, punch, punching die, punching punch, -Manufacturer: Mubea, punching tool square Ø 70 mm -Type: Mubea 70 5-10 holder Ø 50 mm -Die: Ø 150 mm -Total dimensions: Ø 150 x 120 mm -Weight: 6.6 kg

Die holder, notching tool, punching tool, punch, punching die, punching punch, -Manufacturer: Mubea, punching tool Ø 60 mm -Type: Mubea 60 5-12 holder Ø 50 mm -Die: Ø 150 mm -Total dimensions: Ø 150 x 120 mm -Weight: 6.7 kg

Die holder, notching tool, punching tool, punch, punching die, punching punch, -Manufacturer: Mubea, punching tool Ø 60 mm -Type: Mubea 60 holder Ø 50 mm -Die: Ø 150 mm -Total dimensions: Ø 150 x 120 mm -Weight: 6.6 kg

Die holder, notching tool, punching tool, punch, punching die, punching punch, -Manufacturer: Mubea, punching tool square 95 x 95 mm -Type: Mubea 95 holder Ø 50 mm -Die: Ø 200 mm -Total dimensions: Ø 200 x 122 mm -Weight: 11.6 kg

Sprout and miter punch, sprout punch -Manufacturers: ram factories, mechanical corner punch -Intermediate size: 100 mm -Adjustment depth: 65 mm -Dimensions: 1700/600/H1080 mm -Weight: 118 kg

Profile steel shears, profile shears, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shears -Manufacturer: Mubea, profile steel scissors 3-fold combined type Profi 500 -Pressure force: 50 tons -Applications: punching, shearing, cutting, notching -Dimensions: 1240/720/H1350 mm -Weight: 1206 kg

Punching units, punching unit, punching frame, punching tool, non-driven latching and shearing units, forming frame -Handle material: aluminum -Stamping dimension: see photo with dimensions -Quantity: 2 pieces -Price: piece -Dimensions total: 240/145 / H210 mm -Weight total: 22.5 kg / pc.

2 column punching tool, separating tool, punching tool, punch, punching die, punching punch, column frame -Punching tool: 2 columns, with 4-digit code -Recording: bolt Ø 38 mm -Stamping stamp: see photos -Dimensions: 450/265 / H305 mm -Weight: 94 kg

2 column punching tool, separating tool, punching tool, punch, punching die, punching punch, column frame -Punching tool: 2 pillars -Recording: bolt Ø 40 mm -Stamping stamp: see photos -Dimensions: 690/290 / H290 mm -Weight: 61 kg

2 pillars punching tool, separating tool, punching tool, punch, punching die, punching punch, -Punching tool: 2 pillars -Recording: Ø mm bolt -Stamping stamp: see photos -Dimensions: 330/285 / H300 mm -Weight: 59 kg

Punching units, punching unit, punching frame, punching tool, non-driven latch and shear units, forming frame -Handover: in the current condition as seen -Die cuts: as shown in the pictures -Manufacturer: SUPRA, type PA8150 with base plate -Punching tool: Ø 4 mm -Dimensions: 275/200/H180 mm -Weight: 21.4 kg

Punching units, punching unit, punching frame, punching tool, non-driven latch and shear units, forming frame -Handover: in the current condition as seen -Punching frame: as shown in the pictures -Manufacturer: CEWE -Type: PW 8-150 -Projection: 150 mm -Dimensions: 310/100/H215 mm -Weight: 9.1 kg

Multifunctional punch, punch, hole punch, pneumatic hole punch -Article No.: 296 566 -Weight: 170 kg

Punch, hydraulic punch, punching machine, punching device, hole punching machine, row punch, punching unit, multi-head punch, punching system for form folding machine, profiling machine, profiling system, slat production, blinds production -Handover: in the current condition as seen -The punch is without a hydraulic unit but can be supplied at an additional cost -Insert tool -2 punches -both sliding: 500 mm -for small punching jobs -Dimensions: 1230/2020/H1100 mm -Weight: 986 kg

2 column punching tool, separating tool, punching tool, punch, punching die, punching punch -Punching tool: 2 pillars -Mount: Ø 40 mm bolt -Punch: approx. 4.3 mm -Profile width: approx. 14 mm -Dimensions: 262/170/H280 mm -Weight: 32 kg

2 pillars punching tool, separating tool, punching tool, punch, punching die, punching punch -Punching tool: 2 pillars -Punch: 5 pieces 20 x 2 mm, distance 20 mm -Price: per piece -Number: 3 pieces available -Dimensions: 280/140/H160 mm -Weight: 18 kg

Section steel shears, profile shears, punch, punching machine, hole punch -Pressure force: 29 to -Punching: -Scissors: -to cut: -not: -mechanical release: -div. Punches and dies: -Length stop: -Installation dimensions: 1300/1570/H1900 mm -Transport dimensions: 1300/770/H1900 mm -Weight: 1112 kg

Profile steel shears, profile shears, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shears -Manufacturer: Mubea, hydraulic profile steel shears type HPSN 350 -Drive: hydraulic -Pressure force: 35 tons -Equipment: large support table with stops for punching -Punching -scissors -Cut -Notch -various punches and dies -Dimensions: 1460/1700/H1690 mm -Weight: 1080kg

Separating tool, punching tool, punch, punching die, punching punch, gill forming tool -Punching tool for: holding matrices -Bore diameter: 50 mm -Dimensions: 335/220/H180 mm -Weight: 42 kg

Hand punch, hand punch, eccentric punch, hand lever punch, spindle punch, hole punch -Stamp: Ø up to 10 mm -Projection: 60 mm -without: tools -Dimensions: 200/130/H1180 mm -Weight: 12 kg