We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,558 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Description: Working surface: approx. 200 x 200 mm With hand lever: approx. 500 mm length weight approx.: 30 kg, Approx. Onsite Dimension. (l x w x h): 660 x 400 x 400 mm
used
: Ja : Stanzkraft 800 kN frequency: 50 Hz current: 17/11 A voltage: 220/380 V round bar steel: 32-17 mm square edge steel: 30-18 mm : 100 x 10 mm flat steel: 350 x 16 mm throat: 200 mm work height max.: 1107 mm total power requirement: 4 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 1200 x 700 x 1850 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Description: Round steel 30 mm Square steel 120 x 8 mm Angle steel 30 mm Approx. Onsite Dimension. (l x w x h): 1,000 x 1,500 x 1,800 mm, weight approx.: 400 kg
used
Description: Round steel 30 mm Square steel 150 x 8 mm Angle steel 90x8 / 50x6 mm Approx. Onsite Dimension. (l x w x h): 1,000 x 500 x 1,800 mm, weight approx.: 400 kg
used
Description: Flat steel scissors: Knife length: 220 mm Sheets up to: 11 mm Flat steel up to: 120 x 13 mm Profile steel scissors: Angle iron up to: 80 x 8 mm T-iron up to: 80 x 8 mm U and I steel up to: 120 mm Number of strokes: approx. 55 / min. Steel bar shears: Round steel up to: 32 mm Square steel up to: 30 mm Notcher: Sheets up to: 10 mm Latch width up to: 40 mm Latch depth up to: 80 mm Hole punch: Punching capacity: approx. 35 t = 25 Ø x 11 mm / 20 Ø x 13 mm Approx. Onsite Dimension. (l x w x h): 800 x 1,250 x 1,800 mm, weight approx.: 900 kg
used
Description: PUNCHING Punching force: 55 ton Punching capacity: Ø22 x 18 mm (diameter x thickness): Ø50 x 8 mm  , Punching channel flange (height): 180 mm Throat depth: 510 mm Maximum stroke length: 100 mm Cycles/Min. (20 mm stroke): 28 Table dimensions (W x D): 700 x 700 mm Working height up to mould: 1050 mm  , OPTIONAL TOOLS. Largest bore: Ø160 x 3 mm optional tooling Single V-bending press (W x T): 250 x 15 mm optional tool ing Multiple V-bending press (W x T): 500 x 5 mm optional tooling Angle bender: 102 x 9 mm optional tool Rectangular notching machine (W x D x T): 63.5 x 90 x 8 mm optional tool V-shaped notching machine (L x W x T): 145 x 145 x 6 mm optional tool Pipe notching machine (maximum diameter): Ø 100 mm optional tool Flat bar shearing: 175 x 7 mm optional tool Corner shearing: 100 x 100 x 7 mm optional tool Blanking of round bars: Ø 3 ...
used
Punching machine Trumpf TruMatic TC3000-1300 FMC Year of construction 2004 82500 Hours (03.2024) Here is the configration : TruMatic TC6000-1600 FMC Year of construction 2005 Working area: 2585 x 1650 mm Standard equipment: - Stable C-frame - Coordinate guidance with integrated linear magazine, 21 slots for tools and clamping claws. - 3 clamping claws - Drives: Maintenance-free three-phase servo motors - Programmable hold-down device for resetting - Sensor-monitored parts chute 500x500 mm for punching and laser station, ejection cylinder on laser chute - 2 boxes of good parts - Laser unit: High-frequency excited CO2 laser TLF 2000, vibration-isolated in the machine frame, incl. cooling unit and laser control DIAS 3 - HI-LAS high-pressure cutting - ContourLas for making small holes - Programmable cutting gas pressure setting - Laser cutting head: 5" lens, quic ...
used
Description: pressure: 30 tons max punch stroke: 20 m/min. floor movement: 750 x 3000 mm max. range copying: 800 x 1500 mm important: oil pipe is leaking  , please also have a look at the PDF document of this machine weight approx.: 3,300 kg, Approx. Onsite Dimension. (l x w x h): 2,400 x 2,700 x 2,100 mm
used
Description: Seriennummer 4061353488001 weight approx.: 500 kg, Approx. Onsite Dimension. (l x w x h): 1,080 x 600 x 1,700 mm
used
Description: sheet metal punching machine EDEL Stanzomat 410 - 20 with CNC technology serial number: 2811388 control: EF200S  , well preserved , possibility of manual and automatic operation (saved programs) include many tools, original instructions in German  , please also have a look at the PDF document of this machine weight approx.: 4,500 kg, Approx. Onsite Dimension. (l x w x h): 5,000 x 2,500 x 2,000 mm
used
Description: serial number: 041701 control: BOSCH Trumagraph  , max. punching force: 22 tons working area: approx. 2500 x 1300 mm max. sheet thickness: 8 mm max. table load: 200 kg connected load: 19 kVA plate thickness: 8 mm, weight approx.: 11,050 kg, Approx. Onsite Dimension. (l x w x h): 5,200 x 5,200 x 2,200 mm
used
Description: serial number: 041109 control: BOSCH Trumagraph  , max. punching force: 22 tons working area: approx. 2500 x 1300 mm max. sheet thickness: 8 mm max. table load: 200 kg connected load: 19 kVA plate thickness: 8 mm, weight approx.: 11,050 kg, Approx. Onsite Dimension. (l x w x h): 5,200 x 5,200 x 2,200 mm
used
Description: serial number: 041478 control: BOSCH Trumagraph  , max. punching force: 22 tons working area: approx. 2500 x 1300 mm max. sheet thickness: 8 mm max. table load: 200 kg connected load: 19 kVA plate thickness: 8 mm, weight approx.: 11,050 kg, Approx. Onsite Dimension. (l x w x h): 5,200 x 5,200 x 2,200 mm
used
Mabeg Non-Stop Feeder, Stripping Device, 100-2000 g/m2, Max. 6500 Strokes Per Hour, 320 Tons Cutting Pressure, Format: Max. 800x1120mm, Min. 500x360mm, Standard Accessories
used
Stripping Device, Varioplan System, Mabeg Non-Stop Feeder with Pre-Loader, Non-Stop Delivery, Centerline, Elevated, Sidelays On Operator And Off-Side, Formats: Max. 750x1050mm, Min. 350x400mm, Max. Cardboard Thickness: 1,8mm, Max. Corrugated Cardboard Thickness: 3mm, Speed: 9000 Sheets/Hour
used
Working hours machine: 31888 (17.01.2024) h Working hours laser on: 19090 (17.01.2024) h Working hours beam on: 6475 (17.01.2024) h Laser power: 4000 Watt Max. punching force: 300 kN Control: AMNC 3i Working range laser: 2500 x 1170 mm Working range punching: 3050 x 1525 mm Length: 7870 mm Width: 5880 mm Height: 2666 mm Electrical connected load: 85 kVA x-axis: 100 m / min y-axis: 80 m / min Weight of machine approx.: 30000 kg
used
Working hours machine: 70.423 (09.11.2023) h Working hours laser on: 65.422 (09.11.2023) h Working hours beam on: 17.098 (09.11.2023) h Laser power: 4000 Watt Max. punching force: 220 kN Max. sheet thickness: 8 mm Control: Siemens Working range laser: 3120 x 1570 mm Working range punching: 3120 x 1660 mm Length: 8300 mm Width: 8290 mm Height: 2450 mm Machine weight: 23000 kg Electrical connected load: 88 kVA
used
Working area: 3085x1650mm, max. punching force: 220kN, max. sheet thickness: 8mm, max. stroke rate: 750/min, max. workpiece weight: 230kg, max. punching diameter: 76mm, connected load: 19kVA, control: Bosch Trumagraph CC 20S, weight: 13.8t, operating hours: 84,400h, with storage interfaces for forward/backward storage, swing-back clamps, multitool control, air-suspended installation, chip conveyor with container, soft punch, thread forming and TrumaLift SheetMaster 1600 FMC, has been regularly serviced, on-site inspection is possible.
used
Description: Serial Number: A15.564 CNC : TRUMPF Main Drive , Punching Force : 180 KN Max. sheet thickness: 6.4 mm Strokes: ,  ,X-AXIS: 1250 mm  ,Y-AXIS: 1280 mm Max. workpiece thickness , Steel: 4 MM Max. workpiece weight: 75 kg , Max. workpiece height: 38 mm , Programmable force: 4000-17000kn Speeds: , X-axis: 90 m/min Y-axis: 60 m/min Simultaneous: 108 m/min Power: 400 V / 50 HZ Installed power: 17 KVA Important note: , The machine is currently stored as shown in pictures 5-12.  , max. punching diameter: 76 mm, weight approx.: 9,200 kg, Approx. Onsite Dimension. (l x w x h): 5,530 x 2,300 x 2,255 mm
used
plate width: 1,524 mm, plate length: 2,540 mm, plate thickness: 0,5 - 3,5 mm, max. punching diameter: 33 mm, weight approx.: 21,000 kg, Approx. Onsite Dimension. (l x w x h): 21,000 x 7,000 x 2,500 mm
used
Description:  , , ,Serial Number: 32510005 Technical Data Laser: Co2 laser Control: FANUC AF2000C Power: 2kw Technical data Punching machine: Working dimensions:  , 1500 x 2500 mm without repositioning , 1500 x 5000 mm with 1 repositioning. Force: 196 KN Power: 53kva Max. material weight: 280 kg Max. material thickness: , 6,4 ,mm Tool stations: 31 (tooling not included) Max. tool diameter: 88,9 mm Tool change time: 1,5 sec. Automatization ,system Included  , Serial Number: 835 Model: PR UL 300  , ,AP , YOM: 2004 Capacity: 3000kg Power: 5,5kw Stacking Area. 3 400 x 1 400 mm CE standard Note: Machine was dismantled by AMADA and now , is stored laser capacity: 2 kW, control: FANUC AF2000C, total power requirement: 53 kW, weight approx.: 20,000 kg, Approx. Onsite Dimension. (l x w x h): 8,320 x 4,203 x 2,773 ...
used
Die cutter, punching machine, punching device, hole punching machine, hole punch, copy punch, stop punch, hole punch, eccentric punch, row hole punch, punching machine, punch press -Box tube punch: 50 x 30 mm -Round tube punch -Coordinates stop -Projection: 155 mm -various tool with you -Punch quick change system -Page and depth stops -Max. Punching capacity: 36 t -2x quick change tool carrier -Weight: about 2000 kg
used
Die cutter, punching machine, punching device, hole punching machine, hole punch, copy punch, stop punch, hole punch, eccentric punch, row hole punch, punching machine, punch press -Manufacturer: Mubea, punch type KL 100 with 2-axis digital display -Pressure capacity: 100 tons -Punching performance: see photo nameplate -Projection: 535 mm -Material table: 1240 x 615 mm -Travel: x= 1100 mm / y= 600 mm -Digital display: Heidenhain 2-axis digital display -Accessories: incl. see photos -Total dimensions: 2200/2020/H2110 mm -Weight: 3145 kg
used
Pneumatic press, pneumatic punch, multifunctional punch, punch, universal punch, punching machine, pneumatic hole punch -Manufacturer: All Mecanic, multifunctional punch -Type: 994.500-1 - Execution: pneumatically operated, with foot control -Punching tool: see photos -Dimensions: 400/270 / H370 mm -Weight: 28 kg
used
Punch, hydraulic punch, punching machine, punching device, hole punching machine, row punch, punching unit, multi-head punch, punching system for form folding machine, profiling machine, profiling system, slat production, blinds production -Handover: in the current condition as seen -The punch is without a hydraulic unit but can be supplied at an additional cost -Insert tool -2 punches -both sliding: 500 mm -for small punching jobs -Dimensions: 1230/2020/H1100 mm -Weight: 986 kg
used
Die cutter, hydraulic punch, punching machine, punching device, hole punching machine, in-line punch, punching unit, multi-head punch, punching line, punching frame, C-frame punching frame, punching press -Punching system: with hydraulic unit and two C-frame punching brackets -Hydraulic unit: Greenlee type 976-22 -Punch hanger: Greenlee NO. 1731 punch 2 pieces -Footswitch -Workbench: solid design, lockable drawers/doors -Accessories: including punching tools, see photos -Total dimensions: 1430/930/H1425 mm -Weight: 208kg
used
Punch, hydraulic punch, punching machine, punching device, hole punching machine, row punch, punching unit, multi-head punch, punching system -2 punching -Punch movable: 215 - 2505 mm -for: small punching work -Foot switch -Dimensions: 3010/930/H1450 mm -Weight: 570 kg
used
Pneumatic press, pneumatic punch, multi-function punch, punch, universal punch, punching machine, pneumatic hole punch -Receiving frame: for press or stamping tool -Upper part: adjustable stroke approx. 60 mm -Lower part: with pneumatic cylinder stroke 30 mm -Projection: 220 mm -Dimensions: 500/440//H890 mm -Weight: 92 kg
used
Punch, punching machine, punching device, hole punching machine, row punch, punching unit, multi-head punch, punching system, -Number: 5x punching -Max. Width: 1000 mm -Tool built-in: 8x45 mm -Distance punch: 187 mm -driven: electric -Weight: 280 kg
used
Punch, punching machine, punching device, hole punching machine, row punch, punching unit, Mehrkopfpstanze, punching system, -Distribution: 8 x punching pairs with a distance of 60 mm (O 4 mm) -Distance between the two outer punch pairs: 975 mm - Distribution: distance 75 - 165 - 165 - 165 - 165 - 165 - 165 - 75 mm -Max. Passage width: 1000 mm -Drive: electric -Weight: 260 kg
used
Plate punch HD/Nela SM 52; good condition; cleaned and tested; Table equipment; Punching 425mm Autoplate. Plate punch HD/Nela SM 52; good condition; cleaned and checked; table top machine; punch size 425mm autoplate.
used
Profile steel shears, profile shears, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shears -Manufacturer: Peddinghaus, profile steel scissors 5-fold combined model 210/13 on a rotating machine base -Pressure force: 70 tons -Drive power: 4/5 kW 1450/2900 rpm -Throat: 610 mm -Applications: punching, shearing, cutting, notching -Accessories: incl. various. Stamps and dies see photos -Dimensions: 1865/1205/H1990 mm -Weight: 3580 kg
used
Section steel shears, profile shears, punch, punching machine, hole punch -Pressure force: 40 to -Punching -Scissors -to cut -notch -mechanical release -Foot switch: 1 -div. Punches and dies -Dimensions: 800/1250/H1800 mm -Weight: 1112 kg
used
Profile steel shears, profile shears, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shears -Manufacturer: Mubea, profile steel scissors 3-fold combined type Profi 500 -Pressure force: 50 tons -Applications: punching, shearing, cutting, notching -Dimensions: 1240/720/H1350 mm -Weight: 1206 kg
used
Section steel shears, profile shears, punch, punching machine, hole punch -Pressure force: 29 to -Punching: -Scissors: -to cut: -not: -mechanical release: -div. Punches and dies: -Length stop: -Installation dimensions: 1300/1570/H1900 mm -Transport dimensions: 1300/770/H1900 mm -Weight: 1112 kg
used
Profile steel shears, profile shears, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shears -Manufacturer: Mubea, hydraulic profile steel shears type HPSN 350 -Drive: hydraulic -Pressure force: 35 tons -Equipment: large support table with stops for punching -Punching -scissors -Cut -Notch -various punches and dies -Dimensions: 1460/1700/H1690 mm -Weight: 1080kg
used
Profile steel shears, profile shears, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shears -Manufacturer: Peddinghaus, profile steel scissors 5-way combined model 210 SUPER 11 -Pressure force: 40 tons -Drive power: 3/2.2 kW 2800/1400 rpm -Applications: punching, shearing, cutting, notching -Footswitch: 2 -Length stop: Electric contact stop, adjustable up to approx. 1 m -Accessories: incl. various. Stamps and dies see photos -Dimensions: 1620/1350/H1740 mm -Weight: 1323 kg
used
Durma TP9 CNC Punch Press Machine is in good condition Tools and dryer included in the price
used
Amada Europe 255 CNC Punch Press Machine is in good working condition Number of station: 27 3 index(2 piece b, 1 piece c) Fanuc control unit Sheet metal size: 2500x1290
used
Durma TP123 CNC Punch Press Machine is in good working condition Multi-tools are not included
used
Tailift HP 1500 CNC Punch Press Machine is in good condition Number of station : 36 Fanuc control unit Tools are included(36 piece)
used
Durma TP9 CNC Punch Press Machine is in very good condition 20 Ton
used
Durma TP9 CNC Punch Press Machine is in excellent condition 20 Ton
R22104/17 AMC Label Punch Model: NC 110 LCD Built: 1998 Availability: instantly Punching surface 750 x 1100 mm Punch size: max. 280 x 280 mm Min. 10 x 10 mm max. punching pressure 10,000 kg Stacking height 0-25 mm Available: immediately
<br><br><br>Still in operation: Yes<br>Verf Gbar: Immediately
<br><br><br>Still in operation: Yes<br>Verf Gbar: Immediately
used
Miterstanze
used
Extension / distance slide center to frame: 320 mm Sheet thickness / sheet thickness: 3.2 mm Cutting surface / cutting capacity: 1600 mmx2 Distance table pestle/ distance table slide: 417 mm Stroke adjustment / adjustment of stroke: 16...125 mm Stroke number/ number of strokes: 45 / min Pestle adjustable/adjustment of slide: 80 mm Table size / surface of bed: 800 x 630 mm Bumper size / surface of ram: 500 x 400 mm Slope of the stand / inclination of coulmn: 25 Power of main motor power: 4 kW Weight: 2.5 Specification: C-frame punching press, used
used
Standard equipment; Ready
used
Sample punch for specimen DIN 527-2 mm. suitable for elastomers, paper, cardboard and foil. NEW.