punch machine used for sale

Key data: 18 kN, 4 mm, 2000 mm

TC120YOC 1992 Partially overhauled with tools Working range y1000 x2000 with resetting Bosch control system with graphics programming Tool changer 9Stations /2Claws Further service by us BST - Punching machines possible Invoice with VAT Phone Support at BST - Finnentrop (Sauerland) Attention, with us you not only buy a good tested machine, but also the right service

Key data: 24 kN, 6 mm, 2750 mm

TC260 YOC 1990 Partially overhauled with tools Workspace y1300 x2750 Bosch control system with graphics programming Tool changer 10 stations (with multitool up to 60) Further service by us BST - Punching machines possible Invoice with VAT Phone Support at BST - Finnentrop (Sauerland) Attention, with us you not only buy a good tested machine, but also the right service

Key data: 24 kN, 6 mm, 2750 mm

TC260 YOC 1990 Partially overhauled with tools Working area y1600 x2750 Bosch control system with graphics programming Tool changer 10 stations (with multitool up to 60) Further service by us BST - Punching machines possible Invoice with VAT Phone Support at BST - Finnentrop (Sauerland) Attention, with us you not only buy a good tested machine, but also the right service

Book spine punching machine Schmedt Präcut HHS 6501; good condition; cleaned and tested; Block height max.350mm; Block thickness max.90mm; 3 knives. Book block spine machine Schmedt Präcut HHS 6501; good condition; cleaned and checked; max.block hight 350mm; max.block thikness 90mm; three knives.

: gebraucht : 2001 : 9647 : prompt, Zwischenverkauf v : Italien : 32900 € : 1 : 30 to : 1250+N x 1000 mm mm : 1250 mm : 1000 mm : 40 m/Min : 30 m/Min : 50 m/Min : 30 mm : 730 1/Min : 300 1/Min : 980 mm : 4 kW : 115 l : 4000 mm : 2800 mm : 2800 mm : 4800 kg With 6-way multitool holder MTE6 (max. Dm. 24 mm) 2 Clamping claws Table with Brushes, table dimension 1970 x 2260 mm Foot pedal 2 pcs. additional single matrix holders PC with Euromac Software Eurowin 8.36 Max. Punching force 300 kN Automatic repositioning up to 10.000 mm Max. Punching diameter for single tool 88,9 mm, Max. Punching diameter Multitool Holder MTE6 Dm. 24 mm Max. Opening the clamping claws 7 mm Transport width: 2350 mm User Manual in english and italian CE declaration available WITH LARGE TOOL PACKAGE several pieces of each of the following dimensions: Round: Dm. 2,5/2,8/3/3,12/3,2/3,5/3,9/4,1/4/4,5/5/5,2/5,5/6/7/7,5/ ...

- Paper from 80 g/m2, cardboard up to 2000 g/m2, - Corrugated board E, B flute, up to 4 mm thickness - Sheet format max. 740×1050 mm - Sheet format min. 350 x 400 mm - Punching pressure: 260 t / 2.6 MN - Output max. 9000 sheets/hour - Touch screen panel - Punching, creasing, perforating, embossing, stripping - Totalizer: 12,3 mio.

WE ARE SELLING AN NICE CONDITION TRUMPF ROTATION. MACHINE IS READY FOR USE. MACHINE INCLUDES ALSO TOOL GRINDER AND EXISTING TOOLS FOR CUSTOMER WE ORGANIZE TRANSPORT AND DISMANTLING AS WELL

Technical parameters: - max. capacity: 20 t - max. sheet thickness for punching: 6 mm - max. sheet thickness for punching: 4 mm - max. stroke for punching: 25 mm - max. sheet weight at max. speed: 100 kg - table working height: 980 mm - table width: 2400 x 3600 mm - engine: 7.5 kW - number of tools in Multimatrix: 6 - basic tools included in the price of the machine - axis movement: X 2000 mm Y 1250 mm - axis speed: X 90 m/min Y 70 m/min Control system: Siemens Sinumerik 840 DI Machine dimensions (L x W x H): 3600 x 4100 x 2450 mm Machine weight: 11,100 kg The machine is in very good condition.

FinnPower SG5, turret punching machine FMS-system for punching of sheet metal blanks, with integrated power shears, loading and sorting system (by conveyer belts, no stacking possibility) Maximum sheet size: 2 500 x 1 250 [mm] Maximum punch force: 300 [kN] Tooling: Mate tool holder Number of tools: 25 tools in turret, A-D station (Mate Standard) Index tooling: Yes, for specific stations Multitool possibility: Yes Year of manufacturing: 1997

- Presses with a single rotating head with a universal C-shaped bed. — High speed and simplicity of operations. - Steel welded construction, stress relieved. - The system can be connected to a local network, the machine is equipped with a UPS. — The mobile unit control panel+monitor makes the operation of the machine more comfortable and efficient. - Powerful Siemens Sinumerik 840 DSL controller with user-friendly CAD-CAM software. — Hydraulic and electronic components of high quality from trusted manufacturers. — Precision hydraulic components Bosch Rexroth HNC -100 and Siemens drives allow positioning with high accuracy (up to 0.1 mm). Siemens Sinumeriks unique user-oriented system ensures clear and simple program control.

The TRUMPF TRUMATIC 120 Rotation punching machine was built by the well-known German company TRUMPF in 1991. The compact sheet metal processing center enables profiling, punching and sheet forming. The CNC control of the machine uses a graphical interface to program the rotation of all tools. Technical data of the TRUMPF TRUMATIC 120 Rotation punching machine: Performance : - punching force: 15 t (150 kN) - maximum sheet thickness: 4 mm - maximum workpiece weight: 64 kg - maximum punching diameter: 38 mm Speeds: - maximum speed of a single axis: 40 m / min. - maximum speed of two axes simultaneously (XxY): 56 m / min. - rotary axis: 360 degrees / s, full rotation - maximum number of strokes: 320 l / min. Drive type: - X / Y / Z axis: AC motors, maintenance-free - punching: hydraulic drive Control system: TRUMAGRAPH CC 200 Accuracy: - the smallest programmable m ...

Equipment for stamping sheet material produced by Amada is on sale. Machine Vipros 358 King was produced in 1999 in Japan, force 30 t, revolver 58 stations with 4 auto index, brush table type, processing area 1270x4000 mm, maximum sheet thickness 3.2 mm. The equipment was serviced by an official AMADA dealer. The machine is equipped with basic tools and software AMADA and METALIX.

The machine has: -3 punching heads with quick-change tool system -fast tool change -2 sheet clamps - use of all types of punching and forming tools of the Trumpf standard - X-axis 0-3000 Y-axis 0-1250 - positioning speed of the axes 60 meters per minute, positioning accuracy 0.05 mm -automatic height adjustment of the tool stroke Specifications: punching force - 28 t adjustable height of striker stroke - for one stroke 105 mm maximum punching diameter - 90mm maximum thickness of the processed material - 6 mm

Technical data: X axis movement: mm 1000 Y axis movement: mm 1000 Punching power: 15 t Max X axis positioning speed: m/min 40 Max Y axis positioning speed: m/min 40 Max simultaneous speed: m/min 56 Automatic Tool Changer: Stk 9 Number Of Stroke: 1/min 320 Control: Bosch Trumagraph CC 220S Max. Sheet Thickness: mm 4 Max. Tool Diameter: mm 38 Weight: Kg 4300 Color: White Blue Dimension approx. : Length: 3800 mm Width: 4600 mm Height: 1820 mm Configuration: Automatic Tool Changer Stk 9 Safety barriers

- Punching capacity: 300 KN - Area of work without replacement: 750 x 1250 - Area working with replacement: 750 x 2500 - Maximum thickness of material: 6 mm - Number of strokes per minute: 165 - Total weight of machine: 3920 kg - Machine dimensions (W x L x H): 2800 x 2260 x 1800 - Maximum pressure: 300 KN - Y axis stroke with multitool: 1000 mm - Y axis strike in monopunch: 800 mm - X axis stroke: 1250 mm - Automatic repositioning: Up to 10,000 mm - Y axis speed: 30 m / min - 1250 X axis speed: 40 m / min - 2000 X axis speed: 50 m / min - Speed X + Y 1250 tour: 50 m / min - Speed X + Y 2000 tour: 60 m / min - Maximum weight of the sheetmetal: 80 Kg

Machine name: EUROMAC Type: CX 1000/30 CNC - 2000 Manufacturer: SP-Tech s.r.o. Nymburk Year of manufacture: r.v. 2000 Weight: 6 tons Condition: used Accessories: - operating instructions for the punching press - PC with pre-installed FabriWIN software for preparing punch press programs (supports DXF) - a large set of punches and matrices (square, rectangular and circular profiles of more than 80,000 diameters) Specific technical parameters: (see Annex CX 1000/30 CNC - 2000) The machine is ready to ship. Dismantling and disconnection from the current made on 21.2.2019 Price including matrices and punches and specified accessories

Pega 244 is an extremely compact turret CNC punching machine with considerable punching power, ideal for processing medium format sheet metal. Punching capacity: 20 tons Working range with repositioning: 1000x2000mm Max thickness: 6mm Hydraulic brake and hydraulic clutch Characteristics of the CNC: Fanuc Amadam COMPLETE WITH CUSTOM MADE SOUNDPROOFING CABIN

not connected, in stock the laser is leaking, the laser is defective, not working. the machine is sold as a punching machine, not as a combi. punch in good condition. Control…………………………â� �¦â€¦â€¦â€¦â€¦â€¦â€¦â€¦â€¦â€¦â€¦â€¦� �€¦.…………………………†¦â€¦â€¦..Bosch PNC-P Working sheet format…………………………†¦â€¦â€¦â€¦â€¦â€¦â€¦â€¦â€¦â€¦â€¦â€¦â €¦â€¦â€¦â€¦â€¦â€¦â€¦â€¦. 2500 x 1250 Maximum diameter…………………………⠀¦â€¦â€¦â€¦â€¦â€¦â€¦â€¦â€¦â€¦â€¦â€¦ ………………….76.2 mm Impact force……………………… ...

Power in tons 20 T Metal length 1275.0 mm CNC type MNC 4000 Metal width 1025.0 mm Max steel thickness 6.4 mm Many accessories/tools come along with machine User manuel and documentations are available

Durma turret punching machine, type PP 12530. Technical data: Max pressure 300 kN (30 T) Max sheet thickness (for carbon steel) 6 mm Max sheet thickness (for stainless steel) 4 mm Max X axis travel 2000 mm + Automatic Reposition Max Y axis travel (MUTLITOOL) 1250 mm Max Y axis travel (one tool) 1280 mm Automatic positioning range up to 10,000 mm Max number of strokes (nibbling) 600 / min Number of terminals 2 pcs. Gripping force 1000 kg Working height 980 mm Table dimensions 2400 x 3600 mm Max tool diameter in the MULTITOOL head 24 mm Maximum diameter of a single tool 88.9 mm 7.5 kW power Oil tank capacity 160 l Machine dimensions 3600 × 4100 × 2450 mm Weight 8,600 kg Equipment of the PP 12530 punching machine: SIEMENS SINUMERIK 840Di control; MUTITOOL 6 head for tools; Brush table; Automatic control of the correct position of the clamps; Automati ...

GEKA hydraulic punching and shearing machine Model HYDRACROP 80 SD Characteristics Punching power ton 80 Extra gooseneck (SD) mm 500 Punching capacity steel 42 kg/mm² mm Ø 40 x 14 - Ø 24 x 24 Shearing capacity flat iron mm 450 x 15 - 300 x 20 Shearing capacity L mm 130 Shearing capacity U and I (special blades) mm 140 Shearing capacity round mm 45 Shearing capacity square mm 45 Notching capacity mm 90 x 42 x 12 Adjustable stroke for shearing and punching stations mm 0 to 70

Durma PP 1250x30 CNC Punching Machine Maximum steel thickness : 6 mm Stroke : 30 mm Number of stroke per minute : 600 Max X axis 2000 mm movement+Automatic reposition Mad Y axis movement (MUTLITOOL) 1250 mm Metalix control Table size 2400 x 3600 mm Metalix program Many tools are included Machine is in very good condition

CNC punching machine equipped with a Euromac TopPunch control unit. Italian manufacturing Capacity 300kn Machine with annual reviews carried out, very good condition of use Machine width: 3970 mm Machine depth: 3430 mm Machine weight: 8400 kg CNC: Euromac TopPunch Punching force: 300 kN X axis movement: 2250mm Y axis movement: 1250mm Main electronic connection: 400 V / 50 Hz Power consumption: 7.5 kW Automatic repositioning on the x axis: up to 10000 mm Number of d stations: 6 (including 3 index stations) Maximum number of tools in the turret magazine: 6 pieces Punching speed (nibbler mode): 780 1/min, Punching speed (20 mm stroke): 300 1/min Maximum sheet thickness: 5 mm, minimum sheet thickness: 0.5 mm Maximum blade weight: 150 kg brush table Safety barriers USB port Wide variety of tools included, with 2 multitool heads

BOSCHERT Ecco Line EL-500-Digital punching machine The BOSCHERT Ecco Line EL-500-Digital punching machine was built in 2007 in Germany. Machine with a punching force of 28 t and a maximum of 180 strokes per minute, punching in sheets with a maximum thickness of 6 mm. The machine is equipped with a working table with dimensions (W x L) 500 x 1000 mm. The total weight of the punching machine is 2 tons

AMADA EUROPE 245 turret press Technical data : - CNC control: FANUC 18 i-P - pressure: 20 Tons - max. 31 station non-recapture punching format: 1020 x 1290 (Y-10; Y1010 T2XX; Y-50; Y970 T3XX) - max. size of the cut sheet with interception: 1020 x 2540 mm - max. size of the cut sheet with interception + 1 turn (optional): 1500 x 2540 mm - max. sheet thickness on the ball table: 6 mm - max. sheet thickness on the brush table: 3 mm - max. permissible weight on the table: 100 kg - punching accuracy: +-0.1 mm - positioning accuracy: +-0.07 mm - number of clamps/pneumatic holders: 2 - number of axes controlled simultaneously: 3: X, Y, C - revolver speed: 25 rpm. - number of strokes per minute, distance 25.4 mm, cylinder stroke 6.5 mm: 220 strokes / min. - stroke punching, distance 1 mm, cylinder stroke 6.5 mm: 480 strokes / min. - minimum programmable increment: 0.001 mm - nu ...

Universal Punching machine GEKA PUMA 50/E-750 Punching capacity: 50 T Table size: 1000 x 500 mm with length stop Drilling Capacity: Ø 27 x 13 mm Max punching in round: Ø 70 x thick 5 mm / Ø 100 x thick 3,5 mm Max punching in square: 50 x thick 5,5 mm / 60 x 4,5 mm / 70 x 4 mm Max punching in rectangle: 90 x 25 x thick 5 mm Year of construction: 1991 Throat depth: 750 mm Delivered with a set of punches Voltage: 380 V Dimensions (L x W x H): 2000 x 1300 x 2000 mm Weight: approx 2,2 T

Stamping standard

Punching machine Trumpf TruMatic TC500-1300 FMC Year of construction 2000 Configuration : TruMatic TC500-1300 FMC Year of construction 2000 Working area : 2550 x 1280 mm The machine has the following options : • Function multi-tool control • Function thread forming • Winning function • Softpunch function • 1 additional Clamping claw • Sensor for parts chute • Vibration-damped installation • Automatic switch-off • Scratch arm machining for tables •Blow-out device for small parts •Trumasort L6 • Loading station with expansion magnets • TRL SheetMaster 1300 • TrumaGrip 200 mm with scissor lift table

Key data: 20 t, 600 mm, 600 mm

We offer our reliable Amada Aries-222 punching machine for sale here. The machine is fully functional. The associated tool kit is complete and the machine is fully equipped.

Serial No.: 1704 Punching capacity: Ø 28 x 16 Available with special tools: Ø 100 x 4 Year of construction: 1997 Country of origin: Italy

- Paper from 80 g/m2, cardboard up to 1.400 g/m2 - Corrugated board up to 4 mm thickness - Sheet format max. 750×1050 mm - Sheet format min. 350 x 400 mm - Punching pressure:300 t / 3.0 MN - Output max. 7.500 sheets/hour - Touch screen panel - Punching, creasing, perforating, embossing

MACHINE WAS ORDERED BARND NEW FROM THE 1. ST OWNER MACHINE IS STILL ON POWER WORKING DAYLY ORDERS LASER POWER : 2000 W MAX SHEET THICKNESS: 4 mm MAX PUNCHING FORCE: 165 kN ATTACHED VIDEO FOR CUSTOMER WE CAN ORGANIZE DISMANTLING, TRANSPORT

max. format 26 x 38 cm Built in 1980 Price on request. We deliver and install worldwide!

Baier Lifting Punch for labels & die-cut parts - Support width: 25mm to 250mm - Year of construction: 1997 - Embossing force: 100 KN - Heating: 2200 W each - Electricity: 400 V / 50Hz Very well maintained facility The system is technically and visually in good condition

Key data: 75 t, 80 mm, 250 1/min

Pressing force: 75t Table: 650 x 560 mm Plunger area: 500 x 300 mm Stroke rate: 50-250 stroke/min Lifting height: 8-80 mm max. installation height: 400 mm Passage between the side stands: 300 mm Feeder: Manufacturer: GSW Type: WV32/80 Band width: max. 320mm Tape thickness: max. 3.5mm Roller diameter: 80mm

Baier Geba 46 Embossing and Punching machine Machine for punching, embossing and laminating of adhesive labels, labels and other rolls. Age: 1997 Max. web width: 250 mm Cutting area: 240 x 200mm Embossing area: 240 x 200mm 2x Unwinder 2x Punches Rewinder Waste Rewinder

Busch BLS Die-Cutting machine for labels Age: 2017 Max. die cut size: 230 x 320 mm Min. cut size: 20 x 20 mm Max. stack height: 190 mm Die-Cutting pressure: 5700 kg Max. -Cutting strokes: 16 p/min Max. Performance: 960,000 sheets/hour With trolley and delivery tray With control panel With light barrier With waste conveyor With different die tools The die-cutter is most commonly used for cutting contours of large-sized labels, brochures, children's booklets, credit and loyalty cards, for die-cutting in a two-up system and for counter-pressure cutting with special material for inmould labels. The machines process high volumes of all types of products. These are just some of the wide range of items produced. Labels are, of course, the most important: -Labels of all sorts -Large-sized labels for tins and jars -Inmould labels -Stitched, folded and glued brochures  ...

Enko ES 1800 ST Year: 2009 TECHNICAL SPECIFICATION Suitable for the following Materials Solid board : up to 300 g/m² Corrugated and laminated corrugated : 0.5 - 12 mm Cabability specifications: Sheet size : max. 1800 x 1300 mm Min. 800 x 700 mm Cutting pressure : max. (450 t) 4.5 Maximum number of strokes :max. 3000 s/h Dimensions and Weights : Length of machine : approx. 6300 mm Width of machine : approx. 3200 mm Height of machine : approx. 2150 mm Weight of machine : aprox. 24 t Pile height Feeder : max 1200 mm Delivery : max. 1160 mm Technical Data Gripper edge margin, adjustable from : 10 - 18 mm Cutting knife height: 23.8 mm Wood front edge: 27 mm Electrical connected load: 48 KW Electrical supply: 3 Ph 400 V 50 Hz Compressed air required: 6 bar (kg/m²)

PRODUTECH ALPI DECA N coil-fed punching machine which was built in Italy in 2010 is designed for precision punching, blanking and marking of sheet metal with a maximum thickness of 3 mm. The machine’s structure, made of thick electrically welded steel sheets, has all the necessary components to ensure the versatility of high-capacity mass production. One of these elements is the MultiTool head with punches designed for all types of machining, through which any shape can be punched. In addition, each of the punch holders and dies can be controlled independently, even during rotation. The machining process starts with the gradual unrolling of the sheet metal from the coil towards the punching station by the straightener and decoilers. A feed system consisting of rubber-coated and ground roller assemblies then moves the material during continuous machining without the need for stops or ...

Kama DigitalCut 58 automatic punching machine with hot foil stamping The machine has faults. Year of manufacture 2014 Art.Nr. PS5992

Roller feed KAISER ZR 12 Belt width - 120 mm Feed length 100 mm Feed angle - adjustable - 90 - 180 degrees Tech. Condition - good, complete With pneumatics. Spare parts Btto 250 kg

Year of manufacture: 1994 Power: 100 Tons Punching capacity: ø 50 x 15 mm Max punching ø: 90 mm 3 punching heads Gooseneck depth: 750 mm CNC table: 1500 x 750mm Tools User Manual

Used Imac HP 1000 X 2000 CNC punching machine Punching machine Imac mod. HP 1000X2000 with touchscreen CNC and cam software on board the machine equipped with various punches

Pega 244 punching machine year 1987 still in production well maintained complete with automatic loading and unloading mod. MP1020

Used Amada Vipros 255 CNC punching machine Year 1998 Complete with Lki 250 load unloader Machine still in production Well maintained

Key data: 30 t, 100 1/min

Specifications Pressing force 30 t Stroke rate 100 – 600 mm Plunger stroke adjustable up to 40 mm Installation height 300 mm with built-in clamping plate

ALP Used pipe punching machine. Year of manufacture 1996.

The machine is in good technical condition. Upon prior arrangement, inspection is possible, the machine is dismantled and ready for shipment.

5 station tool changer with auto index Discharge 1250 mm Capacity 30 tons incl. many tools

The machine is in good technical condition. Press force 30 tons (300 kN) Sheet format 1250×2500 (processing of flat bars up to 6000 mm) RS: Siemens By prior arrangement, the possibility of a tour in progress.