punch machine used for sale

Hole punch (punch) Northern precision punching NPR-55 Hole punch (knuckle punch) -Punching of sheet metal and plastics. -Aluminium, bronze, copper, 2 mm steel sheets -Simple solution of punching - punching with punch and die stamp round D = 10 mm can be replaced individually on request

Schuler PE4s 50/800 High Speed Press Manufacturer: Schuler Type: PE4s 50/800 High-speed press 61/21 600/3 Pressing force: 50 t Projection: 800 mm Stroke rate /min: 125-300 Plunger stroke: 40 mm Kohler unwinding reel 500.1 M We sell a large number of paternosters. The devices are in operation until 30.06.2021. After the purchase, there are also the documents for it From 01.07.21 the devices are ready for collection. Dismantling and transport by the buyer. Location is Hildesheim The dismantling, loading, as well as transport can alternatively be offered by us. In addition to about 50 paternosters, countless other machines are available. After purchase, the amount is due within 7 working days. Please also note our other offers. Have fun browsing and buying.

Pneumatically driven punching, Horizontally arranged. Pedicure Manufacturer: Meuleman Engineering BV Vosseboerweg 7 7683 SH Den Ham (Ov) Punching force 200kg Special price

Mechanical punch with a punching force of 1000kN. tool holder for stamps up to 90 mm can be mounted on request. A wide range of stamps and dies is included in the scope of delivery.

Manufacturer / Origin: Bacher / Germany (EU)

Printing capacity max. 300 t, table 1500 x 1000 mm, stroke max. 500 mm

M. No.: 1166

Maximum punching force: 650 kN More performance data see nameplate or on request Inclusive range of punches and matrices

Universal - NPR-55U Stanze Knee lever punch -Punching of paper, cardboard and plastics. -for simple stamping -The cutting blades can be recorded from the shaft -The cutting blades can be created also not attached just under the pressure plate. -The pictured tools are not part of the offer.

M. No.: 5927/37

MECHANICAL PAPER SCALE WITH HANDPROBE PUNCH M. No.: 618371 Equipment / Additional information: Mechanical Paper Scale Schiltknecht Switzerland F. No: 8351

! KNIFE RETURNS! Directly from the manufacturer, the original from the patent holder of Apfel GmbH. Also available in other sizes! Dimensions: W=1040 mm, D=1050 mm, H=2140 mm two-tone powder-coated Housing : gentian blue structure (RAL 5010) Extracts : grey-white structure (RAL 9002) Payload per extension 900 Kg Weight: approx. 517 kg Fully assembled as a set included 6 Tool Holders WKH 210 6 Tool Holders WKH 211 5 Tool Holders WKH 212 5 Tool Holders WKH 213 4 Tool Holders WKH 214 4 Tool Holders WKH 215 Dimensions: 1,040 w x 2,140 h x 1,050 t Curb weight: 517 kg Structure powder-coated in Gentian blue RAL 5010 (body) and Off-white RAL 9002 (excerpts)

Register punch ingestion in RG; Knife 90'new ground; Length of format min. 80 mm, max. 340 mm; format width min. 125 mm, max. 350 mm; max. insert height at the table 40 mm; max. cutting height per punch depending on paper quality approx. 8 mm; tee finger for cutting the layers after the cutting process; Machine is serviced and tested by the Infusion Customer Service; other tools on request. Register punch infusion RG; knife 90'new sharpened; min.lenght 80mm, max.340mm; width min.125mm, max.350mm; hight max.40mm; max.cut hight8mm; checked by the support of Tränklein germany; other tools on request.

COLOMBO AGOSTINO 225.400 coil stamping and punching line was built in 2006 in Italy by Colombo Agostino S.p.A. Its extensive machining capabilities and high reliability make it an excellent choice for series production of components, such as washing machine parts or automotive parts. The production process is fully automatic, thanks to a high-speed feeding system. It unwinds the sheet metal from the coil towards the work station, which features precision tools operating at a maximum force of 400 tonnes. The monolithic design of the machine further ensures high durability and stress-free operation. The COLOMBO AGOSTINO coil-fed punching machine weighs 75000 kg. The coil punching line is complete and consists of the following machines: – 400 t eccentric press: COLOMBO AGOSTINO – sheet metal decoiler: DEF CT 3/128 – coil lift table – sheet metal straightener RA 3000/4-8/120 A ...

Plate punch HD/Nela SM 52; good condition; cleaned and tested; Table equipment; Punching 425mm Autoplate. Plate punch HD/Nela SM 52; good condition; cleaned and checked; table top machine; punch size 425mm autoplate.

Key data: 65 t, 57 mm, 305 mm

METALLKRAFT Profile steel shears / hole punch HPS 65 DS Combined hydraulic profile steel shear and hole punch with punch, notching station and flat steel, angle steel and profile steel shear - for simultaneous work on punch and profile steel shear Punching station - Punching pressure: 65 t - Punching capacity: max Ø 26 x 20 / Ø 57 x 10 mm - Projection: 305 mm - Stroke: max. 55 mm - Number of strokes: 25 strokes/min - Working height: 900 mm Steel bar shears - Round cutting capacity: max. Ø 45 mm - Square cutting capacity: max. 45 x 45 mm - Angle steel shears - Cutting capacity L-profile 90°: 120 x 120 x 12 mm - Cutting capacity L-profile 45°: 70 x 10 mm - Cutting capacity U-I profile: 120 x 58 mm - T-profile cutting capacity: 90 x 11 mm - Working height: 1,140 mm Flat steel shears - Cutting capacity 90°: max. 300 x 20 / 375 x 15 mm - Angle cut 45°: max.  ...

Alu window profiles Punching tool for end hole ventilation 4 stations

M. No.: 458/08 (C.2.144.1301/02) Max. Format: B1 Voltage : 100-240V // 300-330VA // 50/60Hz

Printing plate punch/lacquer plate punch for Heidelberg XL 145/162; good condition; cleaned and tested, perforation 1200mm autoplate. Plate punch/ plate punch for varnish plates for Heidelberg XL145/162; good condition; cleaned and checked; hole size 1200mm autoplate.

Trapeze Punch / Croissant Fritsch Bakery Machines -Built in 2007 -Type trapezoid 270/50x90 6R

Pneumatic plate punch INGEKBA Rapida 142; good condition: perforation 780mm autoplate; investment contact; compressed air required. Pneumatic plate punch KBA Rapida 142; good condition; punch size 780mm autoplate; feeder control; Compressed air needed.

James Burn JBI DocuPunch Plus Automatic punching machine for calendar sheet punching. With the DocuPunch you can easily and quickly punch small or large runs of calendar pages and book pages. By Interchangeable tools optionally with round or square holes, with or without thumb hole. Easy to use, like a copier! Description: Punching system for calendar sheet punching (tool not available) Compact, on castors, space-saving Adjustable speed Operation via touch screen Quick job change in about 5 minutes Automatic feeding of sheets from high pile feeder Quick tool change in approx. 2 minutes Foldable punches Simple and intuitive format setting Waste containers for stamping waste Standing sheet delivery Technical data: Max. sheet format: 330 mm (binding side) x 300 mm Min. sheet format: 138 mm (binding side) x 1 ...

Universal punch pots usM 900; good condition; cleaned and tested; 2x punching head; Table size 900x600mm; Max. Insert height 80mm. Universal punch potions USM 900; good condition; cleaned and checked; two heads; table size 900x600mm; max.pile hight 80mm.

Reference Num.: 3657 Brand: Beil Type: 780/425-S-H-AP Construction year: 1999 Available: directly Status: In production Location: Deutschland

Punch, pneumatic punch, punching machine, punching device, hole punching machine, pneumatic hand punch -Manufacturer: DE-STA-CO, pneumatic punch -Type: 040 0210 -built-in stamp: Ø 2.5 mm -Max. Projection: 25 mm -Dimensions: 190/200/H510 mm -Weight: 24kg

Punching units, punching unit, punching frame, punching tool, non-driven latch and shear units, forming frame -Handover: in the current condition as seen -Die cuts: as shown in the pictures -Manufacturer: SUPRA, type PA8150 with base plate -Punching tool: Ø 4 mm -Dimensions: 275/200/H180 mm -Weight: 21.4 kg

Punching units, punching unit, punching frame, punching tool, non-driven latch and shear units, forming frame -Handover: in the current condition as seen -Punching frame: as shown in the pictures -Manufacturer: CEWE -Type: PW8-150 -Projection: 150 mm -Dimensions: 310/100/H215 mm -Weight: 9.1 kg

Separating tool, punching tool, punch, punch die, punch stamp, gill forming tool -Punching tool for: holding dies -Borry hole diameter: 50 mm -Dimensions: 335/220/H180 mm -Weight: 42 kg

stroke: 70 mm work height max.: 1094 mm throat: 500 mm : 40 in 14 mm no. of strokes: 20 Hub/min throat: 500 mm : 80 to engine output: 9 kW range L-W-H: 1980x1150x2000 mm weight: 2000 kg Accessories / equipment: - punching table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 55 t hole diameter in sheet thickness: Ø 40 in 10 mm throat: 500 mm stroke: 60 mm : 38 /min. engine output: 5 kW weight of the machine ca.: 1.150 kg Overall size: 1500x1100x2000 mm Accessories / equipment: - punching table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 55 t hole diameter in sheet thickness: Ø 40 in 10 mm throat: 750 mm stroke: 60 mm : 38 Hub/min engine output: 5 kW weight of the machine ca.: 1.885 kg Overall size: 1500x1100x2000 mm Accessories / equipment: - punching table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 500 kN hole diameter in sheet thickness: Ø 27 in 13 / Ø 28 in 10 mm no. of strokes: 23 Hub/min throat: 130 mm stroke: 30 mm total power requirement: 3 kW weight of the machine ca.: 295 kg Overall size: 1100x900x1550 mm Standard equipment: - punching table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

2 pillars punching tool, separating tool, punching tool, punch, punching die, punching punch -Punching tool: 2 pillars -Punch: 5 pieces 20 x 2 mm, distance 20 mm -Price: per piece -Number: 3 pieces available -Dimensions: 280/140/H160 mm -Weight: 18 kg

Die holder, notching tool, punching tool, punch, punching die, punching punch, -Long hole punching tool: 10.5 x 23.5 mm -Stamping dimension: see photo with dimensions -Socket: Ø 30 mm -Dimensions: 230/200/H230 mm -Weight: 18 kg

Die holder, notching tool, punching tool, punch, punching die, punching punch, -Stamping dimension: see photo with dimensions -Socket: Ø 40 mm -Dimensions: 370/270/H275 mm -Weight: 67 kg

Die holder, notching tool, punching tool, punch, punching die, punching punch -Corner notching tool: punching on both sides -Material width adjustable from: approx. 200 to 440 mm -Stamping dimension: approx. 20 x 20 mm, see photo -Take: Ø 50 mm -Dimensions: 610/245/H380 mm -Weight: 122 kg

Punch, hydraulic punch, punching machine, punching device, hole punching machine, row punch, punching unit, multi-head punch, punching system -2 punching -Punch movable: 215 - 2505 mm -for: small punching work -Foot switch -Dimensions: 3010/930/H1450 mm -Weight: 570 kg

Punching units, punching unit, punching jaw, punching tool, non-driven latching and shearing units, forming jaws -Quantity: 27x punch clips as shown in the pictures -Price for: all 27 pieces -Manufacturer: CEWE JOKA Raskin -various types -Transport dimensions: 590/640/H470 mm -Weight: 190 kg

4-column punching tool, parting tool, punching tool, punch, punching die, punching punch -4 pillars: punching tool -Dimensions: 395/195/H240 mm -Weight: 54 kg

Punching units, punching unit, punching bracket, punching tool, non-driven clinking and shearing units, forming bracket -Manufacturer: SUPRA -Quantity: 2 pieces -Price per piece -Dimension: 237/35/H140 mm -Weight: 3.9kg

2 pillars punching tool, separating tool, punching tool, punch, punching die, punching punch -2 pillars: punching tool -Dimensions: 170/100/H130 mm -Weight: 5.3 kg

Beading tool, punching tool, separating tool, punching tool, punch, punching die, punching punch -Punching tool with: bending function -Admission bolts: 50 mm -Dimensions: 495/495/H430 mm -Weight: 282 kg

2 pillars punching tool, separating tool, punching tool, punch, punching die, punching punch -2 column punching tool -Recording: Ø 32 mm bolt -Dimensions: 270/290/H325 mm -Weight: 39 kg

Punching machine, pneumatic punching machine, punching device, hole punching machine -Insert tool -for small stamping jobs -Control: pneumatic -Dimensions: 610/660/H1200 mm -Weight: 75 kg

4-column punching tool, cutting tool, punching tool, punch, punching die, punching punch, -4 pillars: punching tool -Take bolt: 40 mm -Dimensions: 340/300/H235 mm -Weight: 72 kg

4-column punching tool, cutting tool, punching tool, punch, punching die, punching punch, -Punching tool with: bending function -Admission imensions: 300/205/H445 mm -Weight: 100 kg

4-column punching tool, cutting tool, punching tool, punch, punching die, punching punch, -Punching tool with: bending function -Take bolt: 40 mm -Dimensions: 255/205/H210 mm -Weight: 25 kg

2 column punching tool, separating tool, punching tool, punch, punching die, punching punch, -2 pillars: punching tool -Recording: Ø 40 mm bolt -Dimensions: 300/360/H375 mm -Weight: 130 kg

2 column punching tool, separating tool, punching tool, punch, punching die, punching punch, -2 pillars: punching tool -Admission: M20 fine thread -Dimensions: 270/350/H335 mm -Weight: 132 kg

Separating tool, punching tool, punch, punching die, punching punch, gill forming tool -Manufacturer: Peddinghaus, punching tool for: holding matrices -Bore diameter: 97 mm -Dimensions: 220/335/H115 mm -Weight: 32 kg