punc turret used for sale

Reference ID: PP-62429 Manufacturer: Bobst Model: SP 142 CE Year: 1995 Max. Size: 1420 x 1020 mm Condition: Good Location: Europe Availability: Immediately Manufacturer: BOBST Model: SP 142-CER Year of manufacture: 1995 Maximum sheet size: 1,420 × 1,020 mm Minimum sheet size: 700 × 500 mm Maximum rated speed: 8,000 sheets/hour Maximum cutting force: 5.5 MN (550 t) Recorded operating hours: 51,652 h Condition: Good and fully operational Inspection: Available with the machine running, by appointment   Equipment and configuration Automatic sheet-fed flatbed die-cutting system Die-cutting and creasing section Stripping section for removal of cutting waste Blanking section for separation of individual blanks Side-access tooling arrangement Pull-out tool/frame carrier Operator platforms with access stairs and guardrails Emergency-stop buttons at the machin ...

! KNIFE RETURNS! Directly from the manufacturer, the original from the patent holder of Apfel GmbH. Also available in other sizes! Dimensions: W=1040 mm, D=1050 mm, H=1240 mm two-tone powder-coated Housing : gentian blue structure (RAL 5010) Extracts : grey-white structure (RAL 9002) Payload per extension 900 Kg Product code: 94032080 Swiss Commodity Code: 9403.2010 Origin: DE/08 Weight: approx. 363 kg Fully assembled as a set included 4 Tool Holders WKH 210 4 Tool Holders WKH 211 4 Tool Holders WKH 212 4 Tool Holders WKH 213 2 Tool Holders WKH 214 2 Tool Holders WKH 215 3 tool inserts WEB 360 2 tool inserts WEB 367

Directly from the manufacturer, the original from the patent holder of Apfel GmbH. Also available in other sizes! Dimensions: W=1040 mm, D=1050 mm, H=1240 mm two-tone powder-coated Housing : gentian blue structure (RAL 5010) Extracts : grey-white structure (RAL 9002) Payload per extension 900 Kg Product code: 94032080 Swiss Commodity Code: 9403.2010 Origin: DE/08 Weight: approx. 363 kg Fully assembled as a set included 4 Tool Holders WKH 210 4 Tool Holders WKH 211 4 Tool Holders WKH 212 4 Tool Holders WKH 213 2 Tool Holders WKH 214 2 Tool Holders WKH 215 3 tool inserts WEB 360 2 tool inserts WEB 367

Directly from the manufacturer, the original from the patent holder of Apfel GmbH. Also available in other sizes! Dimensions: W=1040 mm, D=1050 mm, H=1240 mm two-tone powder-coated Housing : gentian blue structure (RAL 5010) Extracts : grey-white structure (RAL 9002) Payload per extension 900 Kg Product code: 94032080 Swiss Commodity Code: 9403.2010 Origin: DE/08 Weight: approx. 363 kg Fully assembled as a set included 4 Tool Holders WKH 210 4 Tool Holders WKH 211 4 Tool Holders WKH 212 4 Tool Holders WKH 213 2 Tool Holders WKH 214 2 Tool Holders WKH 215 3 tool inserts WEB 360 2 tool inserts WEB 367

Directly from the manufacturer, the original from the patent holder of Apfel GmbH. Also available in other sizes! Dimensions: W=1040 mm, D=1050 mm, H=2140 mm two-tone powder-coated Housing : gentian blue structure (RAL 5010) Extracts : grey-white structure (RAL 9002) Payload per extension 900 Kg Weight: approx. 517 kg Fully assembled as a set included 6 Tool Holders WKH 210 6 Tool Holders WKH 211 5 Tool Holders WKH 212 5 Tool Holders WKH 213 4 Tool Holders WKH 214 4 Tool Holders WKH 215 Dimensions: 1,040 w x 2,140 h x 1,050 t Curb weight: 517 kg Structure powder-coated in Gentian blue RAL 5010 (body) and Off-white RAL 9002 (excerpts)

Revolver hole punch, with 12 stations, D in mm 35 x 4/47/50.5 x 14/8 x 37/48/ and other punches and dies Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Punching force: 25 t Punching capacity: D 50 in 3.5 mm Sheet thickness: 3 mm Colour: grey Total power requirement :16 A Machine weight: 3500 kg Projection: 700 mm Dimensions: 120 x 80 x 250 mm Punching diameter: 55 mm Machine Number: 18439-464

Auction-ID: A1-50964-67

Auction-ID: A1-50964-66

Used Dunkes DF 350 punching machine/printing press Auction-ID: A1-50936-134

WE OFFER AN VERY NICE CONDITION TRUMATIC 5000R PUNCHING MACHINE WITH COMPLETE AUTOMATION 24000 WORKING HOURS ONLY MACHINE WILL BE AWAILIBLE IMEDIATELY

Offset plate puncher Ryobi RP 22, in very good condition.

BEIL register systems 425 /printing plate die-cutter suitable for autoplate system Distance 425 mm Art.Nr. L974

CNC punching machine manufactured in 2008. This TRUMPF TruPunch 5000 features a punching force of 220 kN and offers multifunction capabilities, including multi-shear, multi-bending, and thread-forming functions. It also incorporates deburring and rolling technology, along with a small-part sensor for programmable part guidance. If you are looking to get high-quality punching capabilities, consider the TRUMPF TruPunch 5000 machine we have for sale. Contact us for further details.

A laser cutting and punching machine Trumpf with an unknown defect (linear amplifier in order) is available. Press force: 220kN, laser power: 1500W (1.5kW), max. punching diameter: 76mm, max. workpiece dimensions X/Y: 2585mm/1280mm, max. sheet thickness mild steel/stainless steel/aluminum: 8mm/6mm/4mm, max. workpiece weight: 200kg, part dispenser X/Y: 500mm/500mm, magazine positions: 18, machine dimensions X/Y/Z: approx. 8000mm/7500mm/2400mm, weight: approx. 16000kg. On-site inspection is possible.

max. format 72 x 106 cm Built in 1967 automatic punching cylinder Letterpress cylinder converted to a punching cylinder Stack Feeder Shed Feeder Stack delivery Delivery date: immediately Price on request. We deliver and install worldwide!

(printing, laminating, punching) Equipment / Additional information: Car inspection stickers were last produced

Auction-ID: A1-41281-34

Auction-ID: A1-41281-307

Auction-ID: A1-41281-12

WITH EMBOSSING UNIT FROM ABOVE AND BOTTOM S. No.: 5950798 Equipment / Additional information: With heating Also very interesting for the textile industry

Hydraulic punching machine AMADA VIPROS QUEEN 368 with 45 stations. Equipped with FANUC 04PC numerical control, auto-index interface, 4 sheet clamping jaws + 2 base clamp plates, Equifab cooler, PUNCH 5 programming software with automatic nesting, and a set of punch holders. Power ON Hours: 3595H 35M 27S Cycle ON Hours: 1535H 16M 14S Total Hits: 12700196 Manufacturer: AMADA Model: VIPROS 368 QUEEN CNC Control: FANUC 04PC Year of Manufacture: 2001 Number of Stations: 45 Number of Indexed Tools: 4 Maximum Thickness (Standard Steel): 6mm Frame Construction: Bridge-type Press Capacity: 30 tons (294 kN) Press Type: High-speed servo hydraulic cylinder Axis Travel Distance: 1525 x 2000 mm Maximum Sheet Size: 1525 x 4000 mm (with automatic repositioning) Maximum Material Thickness: 3.2 mm mild steel Maximum Hole Diameter (Material Max Cutting Strength 36 kg/mm²): 82 mm diamete ...

Auction-ID: A1-51529-107

sheet width:400 mm plate length:500 mm plate thickness:4 mm total power requirement:0,5 kW Punching and Nibling machine with 6 x 3 mm nibling and 4 mm for cuting

air pressure:8 bar Air consumption:NI 18 l/min. weight:110 kg dimensions of the machine ca.:700 x 300 x 1000 mm

Offer 25086 Specifications: - Flat steel shears - Flat steel - 400 x 120 mm - or: 300 x 22 mm - Profile steel shears - L- and T-irons at 90° 150 x 12 mm - Square steel / round steel 40 / 40 mm - Notches - With square clinker for sheet metal up to approx. 13 mm - Latch depth approx. 70 mm - Latch width approx. 52 mm - Hole punch - Punching force approx. 100 t - Projection 510 mm - Stroke approx. 10 to 50 mm - Perforates in steel up to Ø 31 in 25 mm - E. contact stop - div. 10 pcs. punches + dies - Drive 400 V / 5.5 kW - Space required: W 1100 x H 2000 x D 1700 mm - Weight approx. 2100 kg

Working hours machine: 31888 (17.01.2024) h Working hours laser on: 19090 (17.01.2024) h Working hours beam on: 6475 (17.01.2024) h Laser power: 4000 Watt Max. punching force: 300 kN Control: AMNC 3i Working range laser: 2500 x 1170 mm Working range punching: 3050 x 1525 mm Length: 7870 mm Width: 5880 mm Height: 2666 mm Electrical connected load: 85 kVA x-axis: 100 m / min y-axis: 80 m / min Weight of machine approx.: 30000 kg

Working hours machine: 36101 h Max. punching force: 200 kN Working range punching: 2000 (4000) x 1270 mm Control: Fanuc 18-P Length: 6190 mm Width: 5000 mm Height: 2450 mm Machine weight: 12000 kg

Hot foil stamping machine with original installation on the GTP model. In production.

Used mitre punch with support right extended

Max. punching force: 50 kN Stroke actuation via footswitch

Eylets punchining machine. In production ready condition. With extra repromaterial.

Size: A4 Equipments: Letter Press Tiegel - DIE Cutter Punching force 40 tons Size min.: 40 x 70 mm Standard chase: 260 x 340mm Speed min.: 2.200 sph - max. 5.500 sph

Miter punch With table extension With foot lever With table extension Technical features: Double mitres 45º Simple mitres 90° Maximum cutting height 160 mm Maximum cutting width 110 mm Weight approx. 50 kg

connected load frequency: 220 V rated current: 263/152 : 01516 81 663 694 weight of the machine ca.: 1 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Size: A4 Technical details: Speed: 5500 Power: 380 V 1,25 KW Net Weight: 1100 KG Measurements: L1,68 x B1,24 x H1,85m Equipments: Skeleton chase: 260 x 350mm Speed min.: 2.200 sph - max. 5.500 sph Size max. 260 x 380 mm Letter Press Tiegel - DIE Cutter Punching force 40 tons Complete with tools and accessories include frame Standard chase: 260 x 340mm Machines No T 184634 H

Inv. Num. : 8405 Type: Peddimax No 1 Producer: Peddinghaus Created: 2019 Parameters: Operating hours: 150 h Strength: 140 t Pressure: 300 bar Equipment: Flaps

pressure: 40 t no. of strokes: 500 Hub/min sheet width: mm total power requirement: 5,5 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Combined profile steel shear and hole punch GEKA type HYD 80 / Hydracrop 80/AMasch. No. 9566 Year of construction approx. 2000Punching force 80 ton. Projection 300 mmPunching up to 40 mm in 14 mm sheet metalFlat material shears 450 x 15 mmAngle steel shears 130 x 130 x 13 mm4 edge shears 45 x 45 mmRound material shears 45 mmRectangular clinker up to 12 mmMotor power 5.5 kWNeching connection 400 volts, 50 Hz stop with el. Stroke release 500 mm - work table with stop at the hole device 550 x 380

Pressure plate punch Beil 780/425-S-H-AP2; cleaned and tested; die-cut 780 and 425 mm autoplate; Investment Contact. Plate punch hatchet 780/425-S-H-AP2; cleaned and checked; punch size 780 and 425mm Autoplate; contact for plate.

Bridge punch from Sandt with 30t

Atom cart beam punch with 25t. The machine is fully functional.

Bridge punch of the company Schön, model 64035 / 92 The machine is fully functional.

punching pressure: 16 t plate thickness: 8 mm plate length max.: 1250 mm sheet width - max.: 1000 mm engine output: 13 kW control: Cadman CNC voltage: 400 V weight of the machine ca.: 8,3 t dimensions of the machine ca.: 3600 x 2300 x 2000 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sheet format: max. 1060 x 746 mm, min. 400 x 350 mm Equipment: Stripping station, depaneling, centerline, floor storage in depaneling station, Quick-Lock quick-release closing frame, max. machine speed 9,000 sheets/hour, max. die-cutting pressure 260 tons, processable materials: paper min. 70g/m², cardboard / solid board max. 1,000 g/m², corrugated cardboard up to 2 mm. Condition: Not operational Sale exclusively as spare parts donor Missing parts: Pumps, Grippers, Chain, Cube, Various Electrical Components Other: Machine can be visited by arrangement.

hydraulic: ja : 100 t weight of the machine ca.: 2,9 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Automatic Signature Punching Machine / Automatische Stanzmaschine JAMES BURN Lhermite EM 520 Baujahr / Year 1998 - Serial-No. 211661 Format Einlaufbreite / Size Infeed width 520mm Materialdicke / Thickness max. 3mm (32 pages 80 gr) Geschwindigkeit / Speed max. 10.000cycles/h Papierstärke / Paper thickness 70 to 300 gr.  James Burn Lhermite EM520 is an Automatic Signature Punching Machine.  It can be used for inline or offline production. With Feeder and Jogger delivery. The EM520 features the state of the art modular system for  punching and cutting signatures in line 

Manufacturer: FINN Model: POWER LP6 Year of Manufacture: 2007 Working hours: 21,500 available : immediately Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: FINN POWER Model: LPe5 Year of Manufacture: 2002 Work area: 2500×1250 mm (+ repositioning) AVAILABLE: immediately Find more here - .ucymachines/ Contact us at - sales@ucymachines