punc turret used for sale

1250 x 2500mm with SheetMaster loading/unloading - Lots of tooling

Punching machine, pneumatic punching machine, punching device, hole punching machine -Insert tool -for small stamping jobs -Control: pneumatic -Dimensions: 610/660/H1200 mm -Weight: 75 kg

4-column punching tool, cutting tool, punching tool, punch, punching die, punching punch, -4 pillars: punching tool -Take bolt: 40 mm -Dimensions: 340/300/H235 mm -Weight: 72 kg

Used SMG HZPUX 350/200 - 1500/1300 moulding press in good condition! Main technical data: - Power: 510 ton - Maximum span with castle: 1460 mm - Minimum light with castle: 520 mm - Maximum span without castle: 2160 mm - Minimum light without castle: 1220 mm

Offer 23035 Technical data approx.: - Pressure capacity 30 t. - max. sheet thickness 10 mm - max. punching diameter 105 mm - Punching performance - e.g. Sheet steel : 105 mm in 1.5 mm ; 45 mm in 5 mm - e.g. VA sheet metal : 90 mm in 1.5 mm ; 45 mm in 4 mm - Stroke 7 - 70 mm - Projection 560 mm - Maximum stroke rate 120 h/min - Single stroke / continuous stroke - Drive 400 V / 4 kW - Space requirement approx. W 8000 x H 1850 x D 1700 mm - Weight approx. 1900 kg - with: - Notice table with stops - Foot switch; - Emergency stop button - Punch quick-change device - various receptacles, punches and matrices

Description Plate die-cutter suitable for MAN Roland 300-500-700-900 with autoplate system APL and Graphometronic Film register for plates from CtP systems but also for presses from Heidelberg 52, 74, 102 and XL series and KBA Rapida presses 74, 75, 105, 130, perforations 780 and 425 mm can be switched off each

max. format 34 x 46 cm Year of construction: 1954 Hot foil stamping machine 1 Slide preference 1 heating plate Delivery date: immediately Price on request. We deliver and install worldwide!

4-column punching tool, cutting tool, punching tool, punch, punching die, punching punch, -Punching tool with: bending function -Admission imensions: 300/205/H445 mm -Weight: 100 kg

Offer 22523 Specifications: - Pressure capacity at 10 bar 35 KN - Plunger stroke 12 mm - Projection 95 mm - Installation height approx. 134 mm - Table size approx. 230 x 190 mm - Air consumption per stroke 8.0 l - Air inlet 6 - 10 bar - Space requirement approx. W 520 x H 1450 x D 600 mm - Weight approx. 100 kg - with: - Foot switch - Pressure gauge + pressure regulator - 4 x punching tool

4-column punching tool, cutting tool, punching tool, punch, punching die, punching punch, -Punching tool with: bending function -Take bolt: 40 mm -Dimensions: 255/205/H210 mm -Weight: 25 kg

2 column punching tool, separating tool, punching tool, punch, punching die, punching punch, -2 pillars: punching tool -Recording: Ø 40 mm bolt -Dimensions: 300/360/H375 mm -Weight: 130 kg

2 column punching tool, separating tool, punching tool, punch, punching die, punching punch, -2 pillars: punching tool -Admission: M20 fine thread -Dimensions: 270/350/H335 mm -Weight: 132 kg

Universal stamping machine Max impact power 50 KN Total stroke 80 mm Stroke sequence per hour 1500 Pneumatic Data

Nibbel, stamping and forming center with C frame (C – Frame stress-free annealed before mechanical processing – 15-year warranty on freedom from cracking) All with one machine: Nibbling – Stamping – Forming – Embossing – Tapping – Marking – Deburring Servo-electric punch head drive - up to 950 strokes per minute, adjustable depending on the material feed speed. Maximum punching force 300 kN Maximum sheet thickness 6.5 mm Largest workpiece weight 200 kg Machining area 1,500 mm x 4,000 mm (with repositioning up to 8,000 mm) Punching head with FANUC® drive - Programmable: - Punching stroke - Punching depth - Punching speed and - Stamping tool acceleration Tool magazine for 15 pieces up to optionally 150 pieces indexable tools Indexing accuracy 0.01° On request, the machine can be supplied with a TRUMPF® tool system Patented vertical tool magazine ...

• Description: Versatile punch with many inserts • Power: max. pressure: 35t • Working height: approx. 1000 mm • Dimensions: 1350 x 850 x 1724 mm • Weight: 1540 kg • In operation since: 06.1998 • Accessories: Trolley with many suitable tools

Separating tool, punching tool, punch, punching die, punching punch, gill forming tool -Manufacturer: Peddinghaus, punching tool for: holding matrices -Bore diameter: 97 mm -Dimensions: 220/335/H115 mm -Weight: 32 kg

Punching units, punching unit, punching frame, punching tool, non-driven latch and shear units, forming frame -Transfer in current condition as seen -1x: punching bracket as shown in the pictures -Manufacturer: CEWE -1x: type LWS 35-150 -Dimensions: 300/80/H220 mm -Weight: 13 kg

Separating tool, punching tool, punch, punching die, punching punch, gill forming tool -Punching tool: for holding matrices -Bore diameter: 100 mm -Dimensions: 325/335/H115 mm -Weight: 50 kg

Punch holder, die holder, punching tool, punch, punching die, punching punch -Matrix size: 13.7 mm -Matrix holder: for punching in the legs -Dimensions: 200/120/H90 mm -Weight: 8.7 kg

Sealing punch Deventer (Ref. No. 160-2665) for window seals Cutting width 30 mm L x W x H: 150 x 250 x 200 mm Weight approx. 3 kg The machine is in good condition, ready for operation Subject to changes, errors and prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone: 0041 62 966 18 32 Fax 0041 62 966 21 12

Square notching tool, notching side knife, die holder, cutting tool, punching tool, punch, punching die, punching punch -Punching tool: square notching tool -Punching dimensions: 40 x 79 mm square -Dimensions: 225/145/H95 mm -Weight: 10.6 kg

Die holder, cutting tool, punching tool, punch, punching die, punching punch, gill forming tool -Punching tool: die -Punching dimensions: 15 x 25 mm square -Dimensions: 115/115/H115 mm -Weight: 3.4 kg

Die holder, cutting tool, punching tool, punch, punching die, punching punch, gill forming tool -Punching tool: for holding matrices -Bore diameter: 50 mm -Dimensions: 200/120/H80 mm -Weight: 5.6 kg

Punching force: 500 kN For example, punch a 20 mm hole in 18 mm steel Stroke release via foot switch Assortment of tools is included in the price

Punch holder, die holder, punching tool, punch, punching die, punching punch -Die cut size: 9 x 25 mm -Groove between punch and scraper: 5 mm -Dimensions: 200/140/H170 mm -Weight: 12 kg

Profile steel shear, profile shear, punch, punching machine, hole punch -Pressure force: 40 tons -Punching -scissors -cut -disengage -mechanical release -Foot switch: 1 -various stamps and dies -Dimensions: 800/1250/H1800 mm -Weight: 1112 kg

Multifunctional punch, punch, hole punch, pneumatic hole punch -operated: pneumatic -Year of construction: 1998 -Type: 270164-1

WE ARE SELLING AN NICE CONDITION TRUMPF ROTATION. MACHINE IS READY FOR USE. MACHINE INCLUDES ALSO TOOL GRINDER AND EXISTING TOOLS FOR CUSTOMER WE ORGANIZE TRANSPORT AND DISMANTLING AS WELL

2-column punching tool, separating tool, punching tool, punch, punching die, punching stamp, column frame -Punch tool: 2 columns -Mounting: Bolt Ø 40 mm -Die stamp: see photos -Dimensions: 690/290/H290 mm -Weight: 61 kg

2-column punching tool, separating tool, punching tool, punch, punching die, punching stamp, column frame -Punch tool: 2 columns, with 4-digit code -Mounting: Bolt Ø 38 mm -Die stamp: see photos -Dimensions: 450/265/H305 mm -Weight: 94 kg

Offer 23293 Specifications: - Printing capacity 300 KN - punches e.g. up to 30 mm Ø in steel 9 mm - or with special punching device up to 100 mm Ø in steel 2.5 mm - Infinitely adjustable stroke 0 to 28 mm - Stroke rate 26 to 36 1/min - Projection 610 mm - Installation height 240 mm - Drive 400 V / 4 kW - Space requirement approx. W 750 x H 1650 x D 1350 mm - Weight approx. 1300 kg - With: - Foot switch - Grain detection device, - Support table with foldable stops W 1100 x D 850mm - Sliding paths of the stops from the center of the punch - Width between Li and Re approx. 470 mm x D 510 mm

Book spine punching machine Schmedt Präcut HHS 6501; good condition; cleaned and tested; Block height max.350mm; Block thickness max.90mm; 3 knives. Book block spine machine Schmedt Präcut HHS 6501; good condition; cleaned and checked; max.block hight 350mm; max.block thikness 90mm; three knives.

max. plate width: 80 cm stamp width: 425 mm serial no.: 174 plate punch autoplate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Punching units, punching unit, punching jaw, punching tool, non-driven latching and shearing units, forming jaw -Ironing material: Aluminum -Punch dimensions: see photo with dimensions -Quantity: 2 pieces -Price: per piece -Dimensions: 240/145/H210 mm -Weight: 22.5 kg/pc.

Rung and miter punch, rung punch -Manufacturer: Rammefabriken, mechanical corner punch -Intermediate dimension: 100 mm -Adjustment depth: 65 mm -Dimensions: 1700/600/H1080 mm -Weight: 118 kg

max. plate width: 80 cm stamp width: 425 mm serial no.: 564 plate punch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. plate width: 55 cm stamp width: 220 mm serial no.: 10101/09 plate clamping system: autoplate plate punch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. plate width: 55 cm stamp width: 220 mm serial no.: 10101/09 weight: 12 kg dimensions of press (L x W x H): 70 x 13 x 55 cm plate clamping system: Autoplate for QM 46 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. plate width: 80 cm stamp width: 425 mm serial no.: 1132 Plate punch for Heidelberg S-Offset The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. plate width: 80 cm stamp width: 425 mm serial no.: 5136 Plate punch for Heidelberg S-Offset The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. plate width: 52 cm stamp width: 220 mm serial no.: 16548 plate punch for GTO or QM 46 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Die holder, notching tool, punching tool, punch, punching die, punching punch, -Manufacturer: Mubea, punching tool square 95 x 95 mm -Type: Mubea 95 holder Ø 50 mm -Die: Ø 200 mm -Total dimensions: Ø 200 x 122 mm -Weight: 11.6 kg

Die holder, notching tool, punching tool, punch, punching die, punching punch, -Manufacturer: Mubea, punching tool Ø 60 mm -Type: Mubea 60 holder Ø 50 mm -Die: Ø 150 mm -Total dimensions: Ø 150 x 120 mm -Weight: 6.6 kg

max. plate width: 50 cm stamp width: 220 mm serial no.: 4184/20 Dimensions (L/W/H): 60x20x50 mm plate punch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. plate width: 920 cm stamp width: 425 cm Dimensions (L/W/H): 550/1000/1220 cm plate punch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. plate width: 74 cm stamp width: 340 mm serial no.: 13434 dimensions of press (L x W x H): 80 x 95 x 120 cm weight: 100 kg Thermo plate bender for The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Die holder, notching tool, punching tool, punch, punch die, punch stamp, -Manufacturer: Mubea, punching tool Ø 60 mm -Type: Mubea 60 5-12 Mount Ø 50 mm -Matrix: Ø 150 mm -Overall dimensions: Ø 150 x 120 mm -Weight: 6.7 kg

max. plate width: 52 cm stamp width: 220 mm serial no.: 3851/15 Dimensions (L/W/H): 60x20x50 mm plate punch QM 46 or GTO The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. plate width: 1520 cm stamp width: 780 mm dimensions of press (L x W x H): 150 x 58 x 128 cm plate punch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

stamp width: 425 mm serial no.: 6660/39 Dimensions (L,W): 71 x 55 cm plate punch for SM 52 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.