punc turret used for sale

1250 x 2500mm TLF 2000w Laser STOPA Sheet storage, SheetMaster, ToolMaster, SortMaster Year: 2005

Label book printing machine, 4 colors, 3 colors, 2 colors or 1 color, punching unit, 2 embossing plates, various mounting plates, laminators, UV dryers, dispensers, slitter rewinders, scanner camera, in good condition, immediately available

Capacity 100 ton Table 880x715 mm Max. sheet thickness 3 mm Stroke per min. 360 Stroke 25 mm Ram adjustment 70 mm Distance Ram-table 400 mm 15 kW Dimensions LxWxH 3300x1600x2600 mm Total weight 10 tons

TRUMPF TruMatic 5000 R punching machine was built in 2001 in Germany by TRUMPF GmbH+Co. Maschinenfabrik. The machine has undergone regular maintenance and has been serviced on an ongoing basis throughout its lifetime. In 2025, among others, the oil pump, oil accumulators, head seals and transoms were replaced. The TruMatic 5000R is used for precision machining of both thick and thin sheet metal. All machining processes, i.e. punching and marking, are performed with a force of up to 22 tonnes on a large brush table. The table has been specially modified to handle sheets with a maximum length of 4 metres. Its design prevents any scratches or scrapes on the surface of the sheet metal as well as significantly reducing noise levels. The balls built into the table also facilitate the loading and unloading of workpieces. The TRUMPF TC 5000 R CNC punching machine is extremely easy to opera ...

Back punching machine Schmedt Präcut HHS 65; good condition; cleaned and tested; Block height max.350mm; Block thickness max.90mm; 3 replacement knives. Book block spine machine Schmedt Präcut HHS 65; good condition; cleaned and checked; max.block hight 350mm; max.block thikness 90mm; three knifes.

very well preserved automatic machine with/without motor reel

Condition: Very good condition

Label book printing machine Labelmen PW180DLU, YOC 1996, 4 colors, punching unit, embossing device, various mounting plates, laminators, UV dryers, dispensers, Slitten rewinders, in good condition, immediately Available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

EUROMAC STX Flex 12 1250/30-2500 punching machine was built in 2019 in Italy by Euromac S.p.A.. The machine is designed for precision machining of both thick and thin sheet metal. All machining processes, i.e. punching, nibbling and marking, are performed with a force of up to 30 tonnes on a large brush table. Its design prevents scratches and scrapes on the sheet metal surface and significantly reduces noise levels. All tools are stored in capacious stations, three of which are 360° index stations. The high number of tool strokes per minute, reaching up to 2000/min, allows, in turn, maximum production efficiency during even the most intensive challenges. All this is complemented by an advanced industrial controller that allows even the most advanced programmes to be created in just a few steps. The EUROMAC STX Flex 12 Hybrid 1250/30-2500 CNC punching machine weighs 9500 kg. Technica ...

Handy hydraulic punching bracket with 70mm projection. Maximum punching capacity Ø24mm in 16mm steel. A double-acting hydraulic unit with a maximum printing capacity of 700bar. This new machine comes from a warehouse clean-up. Additional punching tools would be sold separately.

1250 x 1250 with reposition 27 station with 3 index - Very good condition

FINN-POWER X5 turret punch press was built in 2006 in Finland by Finn-Power OY (now PRIMA INDUSTRIE S.p.A.). The machine is used for precision machining of sheet metal with a maximum thickness of 8 mm. The machining process is performed fully automatically by means of a reliable workhead, operating with a maximum force of 25 tonnes. Together with the head, a 20-station turret cooperates which enables a large number of tools of all sizes and types to be stored. The material feed, in turn, is carried out on a large brush table, which prevents scratches and scrapes on the workpiece surface and significantly reduces noise levels. All this is complemented by equipment, consisting of, among others, light curtains and tools. Thanks to all of this, the offered FINN POWER X5 CNC punching machine is the best choice for companies that place emphasis on the high quality of manufactured parts. The to ...

Offer here a post Cewe stand units partly still packed in all paper and unused partly already used or not quite complete anymore the tools have not been used for a bit longer but still in the functional state retail sale possible

Standard configuration Machine ? Stable C-frame for easy access ? Coordinate guide for high-precision machining ? Linear magazine, 3 clamps ? Maintenance free drives ? Repositioning device with programmable presser foot ? Parts chute 500 x 500 mm ? Good parts container ? Swarf bucket Cutting head ? Hydraulic punching head ? Single tool adapter ? 360? rotation of all tools ? Programmable presser foot ? Tool length compensation ? Spray lubrication for punches ? Vacuum slug removal ? Forming Control ? Open control system based on BOSCH ? Control panel with TFT colour screen 12.0? ? Program management ? Online-help ? Integrated technology data ? Diagnostic functions ? Teleservice Programming ? Machine-oriented shopfloor programming Data transmission ? Disc drive and network connection Safety ? CE marking ? Light barriers ? Rapid hydraulic shutdown Additional equipment ? Function Mul ...

With 2x roller stand Auction-ID: A1-44302-290

Paneling Finn-Power Bending Automation Mod. Bending Cell Type BC 2550 200 year 1999 Hours: 27.800 This machine is in good condition and worked for few hours. I point out to you that there is an oil leak wich comes from a cylinder. The machine is functioning and in case of your visit, it can be connected again.

Standard configuration Machine ? Stable C-frame for easy access ? Coordinate guide for high-precision machining ? Linear magazine with 17 tool stations, 2 clamps ? Drives with maintenance free 3-phase servo motors ? Repositioning unit with programmable stripper ? Ball tables ? Parts chute 180 x 150 mm ? Swarf bucket ? Punching head ? Hydraulic punching head ? Rotatable single tool adapter ? 360? rotation of all tools ? Programmable presser foot ? Tool length compensation ? Spray lubrication for punches ? Vacuum slug removal ? Forming Control ? Controller based on Bosch PNC-P ? Control panel with 15 TFT color touch screen ? Easy to use ? Online-help ? Integrated USB interface ? RJ 45 network connection ? Diagnostic functions Safety ? CE marking ? Light barriers ? Rapid hydraulic shutdown Additional equipment ? Function Multitool ? Function MultiShear ? Function Roller Technology ?  ...

Auction-ID: A1-44302-255

AXLE HOLE PUNCH Structure Three-part frame with column guides Drive punching axle pneumo-hydraulic Press force 490 kN Total press stroke: 100 mm Press stroke: 12 mm Cutting impact damping: hydraulic Max. travel cutting impact absorption 7 mm Required air pressure (factory) 6 bar max. tool size 880 x 880 mm min. tool size TBD Ejector function hydraulic Ejector stroke 10 mm Ejector force approx. 50 kN Tool Weight TBD Weight of the upper part of the mould TBD Diarrhea hole diameter 120 -150 mm Clamping tool adapter plate according to template drawing Infeed height top table top 155 mm Adjustment of infeed height due to tool regrinding 0 to -15 mm Disposal of stamping waste. through the table into a box Diameter of punching waste. .. 25 -50 mm Disposal of scrap metal in DLR in crate Manual tool installation Tool clamping manual Pitch circle diameter ejector quills (min -max.) 250 to 500 mm  ...

Register punch EUROTRON IND-XR 500, year of construction 2004, serial number S1-2004-1, with adjustable X-axis and Y-axis see result Photo of test, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome, by prior appointment, to visit the machine in our house.

Standard configuration ? Stable C-frame ? Coordinate guide with integrated linear magazine, 18 tool stations, automatic tool changer, 3 clamps ? Automatic parts chute 500 x 500 mm ? Parts container ? Drives: Maintenance-free, three-phase servo motors ? Programmable presser foot for repositioning ? Punching head: Hydraulic single tool adapter, 360? rotation of all tools, automatic tool length compensation, spray tool lubrication, 2nd lubricant container, programmable stripper movement, vacuum slug removal, swarf bucket ? Control: 32 bit microprocessor control TRUMAGRAPH CC 220 S, 10.4 color screen, programmable logic controller, easy to use, diagnostic functions, graphic programming TRUMAGRAPH, integrated 3.5 disk drive, RJ45 network connection ? Safety: CE marking, multi-beam light barriers, rapid hydraulic shutdown Additional equipment ? Function MultiTool ? Pneumatic repositioning  ...

Punch, pneumatic punch, punching machine, punching device, hole punching machine, pneumatic hand punch -Manufacturer: DE-STA-CO, pneumatic punch -Type: 040 0210 -built-in stamp: Ø 2.5 mm -Max. Projection: 25 mm -Dimensions: 190/200/H510 mm -Weight: 24kg

Punching units, punching unit, punching frame, punching tool, non-driven latch and shear units, forming frame -Handover: in the current condition as seen -Die cuts: as shown in the pictures -Manufacturer: SUPRA, type PA8150 with base plate -Punching tool: Ø 4 mm -Dimensions: 275/200/H180 mm -Weight: 21.4 kg

Punching force 80 tons punching capacity Ø 25 x 23mm Diameter x thickness Ø 50 x 12mm Projection 310mm stroke length 100mm Stroke rate at 20mm 28 / minute Table size 700 x 500mm Working height 1050mm Motor power 5.6kW Model weight 1960kg Dimensions LxWxH 1280x865x1980mm

Standard configuration ? Stable C-frame ? Coordinate guide with integrated linear magazine, 11 tool stations for tools and clamps ? Drives: Maintenance-free, digital three-phase servo motors ? Punching head: Hydraulic system with closed control loop, single tool adapter, 360? rotation of all tools ? Automatic repositioning device with programmable presser foot ? Vacuum slug removal ? Swarf bucket ? Brush tables ? Parts chute 200 x 200 mm and sorting of parts into 2 containers ? 2 parts containers ? Controller BOSCH Type 3, activity-oriented user interface, Online help, diagnostic functions, 3.5 disk drive, BNC/RJ45 connection, TFT color screen 10.4 ? Graphic programming ToPs 2000 ? Safety: CE marking, multi-beam light barriers, rapid hydraulic shutdown Additional equipment ? MultitShear ? MultiBend ? SoftPunch ? Table extension ? Start post

Punching units, punching unit, punching frame, punching tool, non-driven latch and shear units, forming frame -Handover: in the current condition as seen -Punching frame: as shown in the pictures -Manufacturer: CEWE -Type: PW8-150 -Projection: 150 mm -Dimensions: 310/100/H215 mm -Weight: 9.1 kg

Separating tool, punching tool, punch, punch die, punch stamp, gill forming tool -Punching tool for: holding dies -Borry hole diameter: 50 mm -Dimensions: 335/220/H180 mm -Weight: 42 kg

2 pillars punching tool, separating tool, punching tool, punch, punching die, punching punch -Punching tool: 2 pillars -Punch: 5 pieces 20 x 2 mm, distance 20 mm -Price: per piece -Number: 3 pieces available -Dimensions: 280/140/H160 mm -Weight: 18 kg

Specifications: - Printing capacity 50 T - Outreach approx. 360 mm - Installation height approx. 240 mm - Drive 400 V / 7.5 kW - punches in ST 40 e.g. up to 25 mm Ø in 16 mm - up to 20 mm Ø in 19 mm - Space requirement approx. W 1000 x H 1900 x D 1000 mm - Weight approx. 1800 kg

Magazzino DANOBAT 3 mt. 15 postazioni Circa 15 aanni

Die holder, notching tool, punching tool, punch, punching die, punching punch, -Long hole punching tool: 10.5 x 23.5 mm -Stamping dimension: see photo with dimensions -Socket: Ø 30 mm -Dimensions: 230/200/H230 mm -Weight: 18 kg

Die holder, notching tool, punching tool, punch, punching die, punching punch, -Stamping dimension: see photo with dimensions -Socket: Ø 40 mm -Dimensions: 370/270/H275 mm -Weight: 67 kg

Die holder, notching tool, punching tool, punch, punching die, punching punch -Corner notching tool: punching on both sides -Material width adjustable from: approx. 200 to 440 mm -Stamping dimension: approx. 20 x 20 mm, see photo -Take: Ø 50 mm -Dimensions: 610/245/H380 mm -Weight: 122 kg

offer 22273 Specifications: - Stroke 30 mm - Air consumption per stroke 5 l - Pneumatic connection 8 bar - Space requirement approx. W 500 x H 550 x D 500 mm - Weight approx. 70 kg - with: - Foot switch - Machine base mobile W 600 x H 830 mm - Various tools HUECK

Full complete line SACMI for plastic caps.

Punch, hydraulic punch, punching machine, punching device, hole punching machine, row punch, punching unit, multi-head punch, punching system -2 punching -Punch movable: 215 - 2505 mm -for: small punching work -Foot switch -Dimensions: 3010/930/H1450 mm -Weight: 570 kg

Punching units, punching unit, punching jaw, punching tool, non-driven latching and shearing units, forming jaws -Quantity: 27x punch clips as shown in the pictures -Price for: all 27 pieces -Manufacturer: CEWE JOKA Raskin -various types -Transport dimensions: 590/640/H470 mm -Weight: 190 kg

4-column punching tool, parting tool, punching tool, punch, punching die, punching punch -4 pillars: punching tool -Dimensions: 395/195/H240 mm -Weight: 54 kg

Punching units, punching unit, punching bracket, punching tool, non-driven clinking and shearing units, forming bracket -Manufacturer: SUPRA -Quantity: 2 pieces -Price per piece -Dimension: 237/35/H140 mm -Weight: 3.9kg

Punching force: 1000 kN Weight: 2400 kg For example, punches a 40 mm hole in 20 mm steel Stroke release via foot switch Includes viewfinder for graining and setup Assortment of tools is included in the price

• Machine number: 4221875989007 • Punching force max: 800kN • Material thickness max: 25 mm • Punching device max: Ø 90 mm • Accessories according to photos (sold separately on request)

2 pillars punching tool, separating tool, punching tool, punch, punching die, punching punch -2 pillars: punching tool -Dimensions: 170/100/H130 mm -Weight: 5.3 kg

Beading tool, punching tool, separating tool, punching tool, punch, punching die, punching punch -Punching tool with: bending function -Admission bolts: 50 mm -Dimensions: 495/495/H430 mm -Weight: 282 kg

Inv. Num. : 6435 Type: MTX Flex 6 Producer: Euromac Generated: 2014 Parameters: Software: RADAN Operating hours: 19932 h Switch-on hours: 12452 h Compressive force: 30 t Machine height: 1900 mm Machine length: 4840 mm Machine width: 3630 mm Equipment: Multitool Flaps

Name: Sprout punch Manufacturer: Schleicher, 8192 Gerelsried/Obb. Machine number: 8922 Year of construction: 1985 Condition: used, completely revised and tested - pneumatically operated rung punch - working height (cutting height): approx. 150 mm - working width (cutting width): approx. 120 mm - Width (incl. table extensions): 1520 mm - Depth: 600 mm - Height: 1120 mm - Two-hand operation - with angle stop - with length display (ruler) - with adjustable supports for processing palatine strips - Compressed air connection: 5 bar - dust-free working - Table extension left + right (removable) - Stops left + right removable - adjustable for single miter 90° and double miter 45° - 1 x sliding stop Transport dimensions (W x D x H): 1520 x 700 x 1370 mm on pallet Weight: 95 kg (incl. pallet) (Changes and errors regarding technical data and prices excepted!) In ...