punc turret used for sale

Kann zum Stanzen von Papier, Pappe und Aluminimum eingesetzt werden. Can be used for punching Paper, Cardboard and Aluminum. Stanzmaschine / Punching machine Krause FY 43 UB  Serial-No. 313200 Arbeitsbreite / Working width max. 400mm Zum Stanzen von Papier, Pappe und Aluminimum For punching Paper, Cardboard and Aluminum. 2 Hand-Auslösung / 2 Hand release mit Fußschalter pneumatisch zum Fixierung des Produktes with pneumatic foot switch for fixing the product

Für alle Heidelberg SM / CD 74 - 102 Formate Suitable for all Heidelberg SM / CM 74 - 102 Sizes Druckplattenstanze / Plate Punch NELA Autoplate Stanze Heidelberg Year 1998 - Serial-No. 2989/19 Für alle Heidelberg SM / CD 74 - 102 Formate Suitable for all Heidelberg SM / CM 74 - 102 Sizes

Incl. matching workshop drawer cabinet with punches and accessories. Attention: the machine can be transported on a standard truck! Additional technical specifications: • Cutting force: 150 kN • max. stroke: 340 rpm • largest standard round tool: diameter 38 mm • largest standard square tool: edge length 25.4 mm • max. positioning speed axis parallel simultaneous X + Y axis: 40 m/min • max. rotation speed rotatable tools: 360°/sec • Number of tables / table dimensions: 2 x 1130 x 1000 mm

Punching force: 500 kN Stroke: 32 mm Stroke adjustable: 10 - 32 mm Stroke rate: 35 /min Normal punching device: 31 Ø in 12 mm with punching table: 24 Ø in 16 mm with special punching device: 58 Ø in 7, 65 Ø in 6, 90 Ø in 4 and 130 Ø in 3 mm Hydraulic drive: 380 V, 4 kW Weight: 1400 kg Space requirement: 1200 x 1100 x 1680 mm The machine has only 303 operating hours!

With foot switch

Tischabmessungen: ca. 1000 x 500 mm

SACMI lining machine for aluminum caps 28x15.4. The line is without chiller, but in fully working condition.

Heidelberg Cylinder OHZ year 1968 size 54 x 72 cm for cutting good condition

Lining machine for aluminum ROPP caps.

Eccentric press with installed tool for 82mm twist off jar caps. Automatic feeder

Slaan: - 29 x 15 mm - 34 x 12 mm - 20 x 20 mm - 57 x 8 mm Scheren: - 230 x 20 mm - 375 x 10 mm Hoeksnijden: - 90°: 130 x 13 mm - 45°: 75 x 10 mm Doorsnede snijden: - rond: 45 mm - vierkant: 45 mm - C amp; I profiel: 127 mm Inkepingen: - rechthoekig: 45 x 100 mm Punching pressure: 60 ton Max sheet thickness by punching + nibbling: dia 29 x 15 / dia 57 x 8 mm Max punching dia: dia 160 mm Power needed: 5,5 kW Length: 1640 mm Depth: 710 mm Height: 1780 mm Weight: 1570 kg

Punching cylinder 50 x 70 cm 1955 Machine No.: 5692 On stock available: immediately located: Germany

Aluminum cap press Tool: 31x24 Currently in production, regularly serviced Production capacity: 350 caps per minute

Standard configuration Machine ⦁ Stable C-frame for easy access ⦁ Coordinate guide for high-precision machining ⦁ Linear magazine with 15 tool stations, 2 clamps ⦁ Drives with maintenance free 3-phase servo motors ⦁ Repositioning unit with programmable stripper ⦁ Ball tables ⦁ Parts chute 180 x 150 mm ⦁ Swarf bucket Punching head ⦁ Hydraulic punching head ⦁ Rotatable single tool adapter ⦁ 360° rotation of all tools ⦁ Programmable presser foot ⦁ Tool length compensation ⦁ Spray lubrication for punches ⦁ Vacuum slug removal ⦁ Forming Control ⦁ Controller based on Bosch PNC-P ⦁ Control panel with 15 TFT color touch screen ⦁ Easy to use ⦁ Online-help ⦁ Diagnostic functions Data transmission ⦁ Integrated USB interface ⦁ RJ 45 network connection Safety ⦁ CE marking ⦁ Light barriers ⦁ Rapid hydraulic shutdown Additional equipment Punc ...

Standard configuration Machine ⦁ Stable C-frame for easy access ⦁ Coordinate guide for high-precision machining ⦁ Linear magazine with 19 tool stations, 2 clamps ⦁ Maintenance free drives ⦁ Repositioning device with programmable presser foot ⦁ Parts chute 500 x 500 mm ⦁ Good parts container ⦁ Chip conveyor ⦁ Automatic shutdown mechanism Cutting head ⦁ Electro-hydraulic punching head ⦁ Rotatable single tool adapter ⦁ 360° rotation of all tools ⦁ Programmable presser foot ⦁ Tool length compensation ⦁ Spray lubrication for punches ⦁ Vacuum slug removal ⦁ Forming Control ⦁ Open control system based on BOSCH PNC-B ⦁ Control panel with TFT colour screen 12.0” ⦁ Program management ⦁ Production plan ⦁ On-line help ⦁ Integrated technology data ⦁ Diagnostic functions Programming ⦁ Machine-oriented shopfloor programming Data transmission � ...

A decoiling, straightening and stamping line with roller feed, straightening machine, decoiler and hydraulic press is available, 1) Roller feed WV-U-80/DSM 300 P-N, working direction: left to right, max. strip width: 300mm, strip thickness: 0.1-5mm, max. strip cross-section: 1,000mm², roller diameter: 80mm, max. feed speed: 120m/min, max. roller contact force: 4.5kN, feed accuracy: ±0.05mm, adjustable pneumatic pressure: approx. 5bar, 2) Straightening machine RSTC W60/7/300, working direction: left to right, passage width: 320mm, max. strip width: 300mm, strip thickness: 0.4-5mm, max. strip cross-section: 1,050mm², straightening and correction roller diameter: 60mm, feed roller diameter: 80mm, strip speed: 0-30m/min, feed rollers: 4, straightening rollers: 7, correction roller: 1, drive power: 3kW, 3) Decoiler E 3000/300 OMB, working direction: left to right, max. load capacity: 30kN, ...

Standard configuration Machine ⦁ C-frame ⦁ Coordinate guide ⦁ Linear magazine with 21 spots for clamps and tools ⦁ Hydraulic clamps (3 pieces) ⦁ Drives with maintenance-free 3-phase servo motors ⦁ Repositioning unit with programmable stripper ⦁ Ball-fitted tables ⦁ Foot switch for closing clamps ⦁ Part chute ⦁ Part removal flap 500 x 500 mm ⦁ Finished part container ⦁ Chip container ⦁ Ability for retrofitting ToolMaster Linear ⦁ 1st index pin position right hand inner side Punching station ⦁ Electro-hydraulic punching head ⦁ Rotatable single station tool adapter ⦁ Manually adjustable presser foot force ⦁ Programmable position of the presser foot ⦁ Tool length compensation ⦁ Spray lubrication for punches ⦁ Vacuum slug removal with condition monitoring ⦁ Forming ⦁ Stroke rate punch ⦁ Level monitoring of tool lubrication ⦁ On-Demand-Dri ...

Standard configuration Machine ⦁ Stable C-frame for easy access ⦁ Linear magazine inclusive four clamps ⦁ Parts flap 500 x 500 mm ⦁ Good parts container ⦁ Ability to retrofit ToolMaster Linear Punching station ⦁ Electro-hydraulic punching head ⦁ Rotatable single tool adapter ⦁ Programmable presser foot ⦁ Stripper position sensor ⦁ Tool length compensation ⦁ On-Demand-Drive ⦁ Punch stroke rate and thread stroke rate counters ⦁ Spray lubrication for punches ⦁ Vacuum slug removal with condition monitoring ⦁ Monitoring of fill level of tapping and tool lubrication Control ⦁ Open controller based on Sinumerik 840D Solutionline ⦁ Control panel with 17 TFT touch screen Data transmission ⦁ USB interface and network connection RJ45 Safety ⦁ CE marking ⦁ Multi-beam light barriers ⦁ Rapid hydraulic shutdown ⦁ Sheet collision detection Addition ...

Key data: 400 t, 120 1/min

Müller Weingarten Punching Machines Type. HQR 400.25 with Schuler conveyor system.

used Ridgid hand lever punch Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is being carried out Sheet thickness max. steel 6.3 mm Projection approx. 100 mm 80 Colour blue Weight 25 kg Pressure 80 kN Punching diameter max. D 22 mm Type of drive by hand Dimensions approx. 300 x 400 x 600 (without lever) mm Tool holder (S) Peddinghaus Punching capacity D 18 in 3.5 + D 10 in 6.3 mm

Bobst SP 142 CER MATIC – Flatbed die cutter with blanking Year: 1990 Max. sheet size: 1,020 × 1,420 mm; Min.: 700 × 500 mm Equipment: Automatic sheet feeder and lateral BOBST Centerline system Die-cutting, creasing, stripping and automatic blanking Automatic non-stop delivery and waste extraction Operator platforms and quick cutting-frame change BOBST factory retrofit with upgraded controls and safety equipment Reference: PP-60850 Further information on request.

Bobst / Iberica TR-105 F – Flatbed die cutter Year: 2003 Max. sheet size: 750 × 1,050 mm; Min.: 350 × 400 mm Speed: up to 9,000 sheets/h Corrugated board thickness: up to 3 mm Non-stop arrangement with belt. Reference: PP-56295 Further information on request.

Key data: 250 t, 200 mm, 60 1/min

WEINGARTEN DE 250 Punching machines with conveyor system for sale. Table 2,000 mm x 1,200 mm

IMG Klett Cobra Express A 12-165 – Automatic flatbed die cutter Year: 2009 Max. sheet size: 1,200 × 1,650 mm; Min.: 450 × 650 mm Max. cutting size: 1,180 × 1,630 mm; max. cutting force: 450 t Mechanical speed: up to 6,000 strokes/h Corrugated board: 1–8 mm; solid board: 1–4.5 mm Cutting-rule height: 23.8 mm Fully automatic machine with quick-change tooling system. Reference: PP-54365 Further information on request.

Offer 26265 Technical data: - Flat steel shears cut up to 240 x 13 mm - Profile steel shears - Cuts L-steel at 90° to 100 x 10 mm - at 45° to 70 x 8 mm - Steel bar shears - Cuts round steel up to 35 mm - Square steel up to 32 mm - Notching device with square notching device - Hole punch - punching force 600 KN - projection 220 mm - Punches in steel up to 30 mm Ø in 15 mm - Punches in steel up to 24 mm Ø in 20 mm - various punches + dies - E. – Footswitch - Drive 400 V / 4 kW - Space requirement approx. W 540 x H 1800 x D 920 mm - Weight approx. 1200 kg

Key data: 40 t

Machines from the die-cutting production sector for the processing of coil coil material up to 1mm material thickness for the production of strip goods such as contact plugs for the general electrical and automotive industry. For sale are various high-speed presses from Schaal from 12kN to 40kN. In addition, various material coil unwinders from Huras-Stanzautomation can be purchased. In addition, various automatic winding machines from TF-Wickeltechnik and Huras are for sale. In addition, various pereferie devices can be purchased.

Offer 26239 Technical data: - Pressure capacity 250 KN - Max. sheet thickness 10 mm - Max. punch size / punch diameter 105 mm - Stroke infinitely adjustable 0 - 40 mm - Projection 750 mm - Maximum stroke rate 150 H/min - Installation height 200 mm - Drive 400 V / 8.2 kvA - Space requirement approx. W 4200 x H 1700 x D 1700 mm - Weight approx. 3200 kg - with: - Anchor table Li + Re per X-axis 2000 mm - Y - axis 500 mm - Punch quick-change device - Foot button; Emergency stop button - Extensive accessories, various mounts - Stamps and dies

Used ALOUMIL press for cutting and punching aluminium profiles, air-operated (pneumatic drive). Used for cutting and punching aluminium profiles in the manufacture of aluminium windows and doors. Technical characteristics: - Brand: ALOUMIL - Pneumatic (compressed-air) operation Exact model and further technical specifications (capacity, dimensions, weight) are not confirmed for this specific unit - please contact us for details. Checked and ready to work Auction-ID: A7-50988-38

Kit consisting of 8 pin punches, 2 awls and 4 mason's chisels Overall dimensions: 400 x 200 x 100 mm Weight: 5 kg Auction-ID: A7-50798-324

Kit consisting of 8 pin punches, 2 awls and 4 mason's chisels Overall dimensions: 400 x 200 x 100 mm Weight: 5 kg Auction-ID: A7-50799-374

Used ALOUMIL press for cutting and punching aluminium profiles, air-operated (pneumatic drive). Used for cutting and punching aluminium profiles in the manufacture of aluminium windows and doors. Technical characteristics: - Brand: ALOUMIL - Pneumatic (compressed-air) operation Exact model and further technical specifications (capacity, dimensions, weight) are not confirmed for this specific unit - please contact us for details. Checked and ready to work Auction-ID: A7-50988-37

Pressing tool, sheet metal former, forming tool, straightening tool, special punches/mandrel elements, centering or positioning tool -Manufacturer: Mubea, Punching tool: Pipe notching tool, 18 pieces -Matrices: 8 pieces, sizes 1 to 1 1/4 -Stamps: 10 pieces, sizes 1 to 2 -Quantity/Dimensions: see photos/parts list -Submission/Price: complete -Transport dimensions: 360/170/H45 mm 170/150/H30 mm -Weight: 10.7 kg / 3 kg

Morsoe miter punch, in good condition, immediately available. If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

Punching Crucible TMZ Type L122, built in 1997, format 93x126 cm, punching force 350 to., speed 1400 rpm, quick-release frame, safety floor mats, in good condition, immediately available

Standard configuration Machine ⦁ Stable C-frame for easy access ⦁ Ball-fitted tables ⦁ Coordinate guide for high-precision machining ⦁ Linear magazine for tool stations and clamps ⦁ 21 tool stations, 4 clamps ⦁ Part chute for small parts 80 x 50 mm ⦁ Parts flap 500 x 500 mm ⦁ Good parts container ⦁ Ability to retrofit ToolMaster Linear ⦁ 1st index pin position inner side (right or left) Punching station ⦁ Electro-hydraulic punching head ⦁ Rotatable single station tool adapter ⦁ Manually adjustable presser foot force ⦁ Programmable pressure foot (active /passive / repositioning) ⦁ Tool length compensation ⦁ Spray lubrication for punches ⦁ Vacuum slug removal with condition monitoring ⦁ Stroke rate punch ⦁ Monitoring of fill level of tapping and tool lubrication ⦁ On-Demand-Drive ⦁ Stripper position measurement system with function sheet thick ...

Industrial blue finish. Equipped with several drilling heads, a work table with positioning stops and a ruler. Electric machine on metal frame, suitable for document perforation and printing work. Functional Auction-ID: A1-51273-19

Reference ID: PP-53278 Manufacturer: Wook Model: WTNS-2500 SF Year: 2008 Max. Size: 2500 x 1500 mm Condition: Good Location: Europe Availability: Immediately Maximum die-cutting pressure: 600 tons Power supply: 400V, 50Hz Prefeeder, fully automatic Brand: HF technology Model: MFS 2500 HBL, Model 2516 Maximum sheet size: 2500 x 1650 mm Minimum sheet size: 600 x 450 mm Maximum speed: 13,200 sheets/hour Maximum stack height: 2400 mm (minimum 500 mm) Maximum stack weight: 2000 kg Power supply: 400V, 50Hz Year of manufacture: 2011

Die-cut crucible Gietz MDST, machine number 11848, year of manufacture 1989, in good condition, immediately available We have two more Gietz models. Please request a quote. If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

An Amada CNC turret punching machine for medium format sheets including an MP300 M loading unit, Wilson X-Sharp grinding machine and numerous standard and special punching tools are available. 1) CNC turret punching machine Amada, year of manufacture: 2007, punching force: 300kN, max. sheet dimensions X/Y: 3000mm/1500mm, max. sheet thickness: 6.35mm, stroke rate: 600 strokes/min, simultaneous positioning speed: 128m/min, repeat accuracy: +/-0.1mm, machine dimensions X/Y/Z: approx. 5100mm/3200mm/2300mm, weight: approx. 18000kg. 2) Automatic sheet loading and unloading system Amada MP 300 M, max. sheet dimensions X/Y: 3000mm/1500mm, min. sheet dimensions X/Y: 1000mm/300mm, sheet thickness range: 0.8mm-6mm, max. load capacity per pallet: 3000kg, max. stacking height: 400mm, max. sheet weight: 170kg, max. pallets: 9, pallet change time: 25s, sheet loading time: 18s, weight: approx. 4900kg. 3 ...

Heidelberg Embossing Crucible TP, Machine Number T169693+ Heidelberg Embossing Crucible TP,T191298, Machine is in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punching die, corner notching punch, punching punch, square notching punch, notching punch, notching tool -Punching tool: Notching die for profile steel shears, flat steel shears -Width: 53 mm -Dimensions: see photos -Dimensions: 110/53/H54 mm -Weight: 1.8 kg

Incl. accessories, consisting of: a.o. Control unit, dimensions (LxWxH) approx: 650x760x1850 mm Control cabinet, dimensions (LxWxH) approx: 3000x700x2450 mm Dispenser, swivelling, dimensions (LxWxH) approx: 1600x2400x2000 mm, diameter approx: 1500 mm Feeder, dimensions (LxWxH) approx: 1600x1100x1500 mm Soundproof cabin, dimensions (LxWxH) approx: 6600x3260x4400 mm, internal dimensions (LxWxH) approx: 4650x3080x4200 mm 2 magnetic belt conveyors 2-hand control Protective fence Auction-ID: A1-51211-9

Punch holder, die holder, notching tool, punching tool, punch, punch die, punching die, for eccentric press, hydraulic press, quick-change punch holder -Stamp holder: Stamp holder with quick-change device -Hole: Ø 36 mm -Base plate: Hole spacing 100/45 x 14 mm -Dimensions: see photos -Dimensions: 135/85/H110 mm -Weight: 3.7 kg

Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punching die, corner notching punch, punching punch, square notching punch, notching punch, notching tool -Punching tool: Square notching die for profile steel shears and flat steel shears -Width: 50 mm -Dimensions: see photos -Dimensions: 140/50/H60 mm -Weight: 3 kg

Renewal of the control system of BEISELE 2012 Incl. accessories, consisting of: a.o. Control unit, dimensions (LxWxH) approx: 850x700x2000 mm Control cabinet, dimensions (LxWxH) approx: 2400x600x2700 mm KOHLER - 2000.2 - Dispenser, swivel, dimensions (LxWxH) approx: 1600x2400x2000 mm, diameter approx: 1500 mm Soundproof booth, dimensions (LxWxH) approx: 4680x3300x4100 mm, interior dimensions (LxWxH) approx: 4500x3000x3990 mm 2 magnetic belt conveyors 2-hand control Protective fence Auction-ID: A1-51211-11

Vertical Shearing Machine Auction-ID: A1-50663-1640

Reference ID PP-62886 Category Flatbed Die Cutter Manufacturer Iberica Model TR105F Year Built 2004 Color - Impression - Working Hours - Speed - - Max. size 750 x 1050 mm Min. Size - Condition Good Location Europe Availability Immediately Machine Description 27632 hours Stripping station Max. size: 750 x 1050 mm. Min. size: 350 x 450 mm. Min grammage: 90g/m2 Max. for solid: 1.5 mm. Max. for corrugated: 3 mm. Max. pressure 300 T Max. speed: 9000 ark/h 1 mm. Plates system with micrometric In production

9 drawers filled very elaborate punching, round square slop etc etc including under tool Auction-ID: A1-50707-17

equipped with extraction Auction-ID: A1-50707-126