pump netzsch used for sale

BORNEMANN W6N, Pump capacity 100 m3/h, for heavy oil products el. mootor 37kW, 1475 r/m.

Screw pump Bornemann W8.4ZK-144, 4,5 bar, 896 m3/h, engine ABB 250 kW, 455A, 1486 r/m. Used for pumping fuel oil at the fuel terminal.

Working pressure 6 bar, capacity 290 m3/h, viscosity 650 CST. , el.mootor 132 kW, 237A, 1480 rm. There are also models W7T.2ZK-130, W7T.2ZK-144

Pressure 9,5 bar, Pump capacity 360 m3/h Liquidity 250 CST el.mootor 160 kw , 1487 rpm , 232 A

Pressure 10 bar, Pump capacity 200 m3/h Liquidity 250 CST el.mootor 132 kw , 1315 rpm , 232 A 5 pcs.

Pressure 6 bar, Pump capacity 85 m3/h el.mootor 30 kw , 2940 rpm , 66 A

Pressure 4,5 bar, Pump capacity 40 m3/h el.mootor 11 kw , 2940 rpm , 21,5 A 7 pcs.

Pressure 4,5 bar, Pump capacity 40 m3/h

Centrifugal pump, diesel fuel Pressure 6 bar, Pump capacity 200 m3/h el.mootor Siemens 55 kw , 2940 rpm , 100 A 6 pcs.

Volumetric pump, Link to the manufacturer:: .fristam/product/fl2/, Engine: North motor : 1.10 Kw , Nominal rotation speed : 58 1/min , Link to manufacturer:: .fristam/product/fl2/, Rated rotation speed : 58 1/min

Key data: 11

Shamal K60 Suitable for 15 hp, flow rate 1745 l/min This is an original new compressor pump. Compare the measurements with the information in the text and on the photo. This will help you determine if it's the right pump. X=245mm Y=300mm D=550mm All employees speak Dutch, German and English. Prices are exclusive of VAT. Shipping is possible (at an additional cost). (Subject to changes and errors in technical data, information and prices as well as prior sale.)

Shamal K30 Suitable for 5.5 / 7.5 hp / 4 / 5.5 kw, flow rate 900 l/min This is an original new compressor pump. Compare the measurements with the information in the text and on the photo. This will help you determine if it's the right pump. X=190mm Y=225mm D=400mm This compressor pump is used by several compressor manufacturers. All employees speak Dutch, German and English. Prices are exclusive of VAT. Shipping is possible (at an additional cost). (Subject to changes and errors in technical data, information and prices as well as prior sale.)

Centrifugal pump, motor 1,1kw, Impeller size 130mm, max 18bar, 33m3/h 2800rpm, inlet/outlet 51/51mm

Centrifugal pump, motor 1,5kw, impeller size 160mm, max 18bar 55m3/h, 2800rpm, inlet/outlet 65/51mm

Centrifugal pump, inlet/outlet 51/51mm, motor ABB Motors 4kw 1420 rpm 20m3/h

Centrifugal pump, 11kw, inlet/outlet DN 80 to DN 100 PN16 (DIN2633)

M. No.: 070068681 Equipment / Additional information: Hz: 50/60 V250/300 m3/h P 100 hPa (0.1 bar)

M. No.: 43954 Equipment / Additional information: Vacuum: 20 mbar Motor Oil: Type SAE 30 Qt.: 6 Ltr.

Centrifugal pump, motor 7,5hp/11,5kw; 1400RPM;60m3/h; Id No: 21973. Closed hygienic centrifugal pump with open impeller. The pump meets the highest requirements of the food, pharmaceutical, chemical and water treatment industries. Parts in contact with the working environment are made of stainless steel CF-3M 1.4404/AISI 316L. The clamp body and seal are designed to be quickly disassembled for inspection, cleaning and maintenance. All dimensions are indicated in the drawing. The passport contains the following technical characteristics: liquid lifting height up to 25 meters, volume of pumping liquid up to 1000 l/min (60 m3/h)

GRUNDFOS brand in-line dry break pump model TPD 50-430/2 A-F-A-BQQE. Technical characteristics Model TPD 50-430/2 A-F-A-BQQE MANOMETRIC HEIGHT 29.6 Maximum pressure 16 bar Maximum temperature 120 ºC Documentation No documentation Maximum Flow Maximum flow rate 32.7 m3/h Status In your state Manufactured by GRUNDFOS

A chemical pump in its original packaging is offered.

Stock number: PT1571, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Lobe pump, Construction: On a stainless foundation, Dimensions: L 900 x W 260 x H 330 mm., Motor: 2,2 kW - 220/380 Volt - 248 rpm., Theoretical capacity: 3800 l/h., Working pressure : Max 8 bar, Dimensions inlet: 40 mm., Dimensions outlet: 40 mm., Manufacturer: Fristam, Type: FLFN 75S, Other: Horizontal throughput

Condition: New, In Stock / Mint / Unused Brand: Grundfos Type: CRN-3-6-A-P-G-V-HUBV Model No.: -PN-SN A-99884747-10000012 Type: CRN1-8 X-FGJ-A-N Flow rate: 1.8 m³/h Height: 38.5 m Maximum lifting height: 50 m Maximum pressure/temperature: 25/120 bar/°C Motor: Three-phase 400 V – 0.75 kW – 2900 rpm – IE3 Voltage: Three-phase current 400 volts Power: 0.75 kW Weight: 32 kg Dimensions (W x H): 70 cm x 20 cm x 30 cm All employees speak Dutch, German and English. Prices are exclusive of VAT. Shipping is possible (at an additional cost). (Subject to changes and errors in technical data, information and prices as well as prior sale.)

15 peristaltic pumps WATSON MARLOW / FLEXICON, Type PD 12 P, Compatible tube sizes:, Dia. int. 0.5 to 8.0 mm, Internal diameter of 0.5 mm / 0.8 mm / 1.2 mm / 1.6 mm / 10.0 mm / 12.5 mm / 3.0 mm / 3.2 mm / 4.8 mm / 5.0 mm / 6.0 mm, Precision:: ±0,5 % , Elec: : 230 V / 50 Hz / 1850 W , Link to the manufacturer: : .wmfts/fr-fr/flexicon/remplissage-et-controleurs-oem/remplisseuses-oem /

11 Watson-Marlow / Flexicon peristaltic pumps for sale in bulk or individually., Type PD 12P, Compatible tube sizes:, Dia. int. 0.5 to 8.0 mm, Internal diameter of 0.5 mm / 0.8 mm / 1.2 mm / 1.6 mm / 10.0 mm / 12.5 mm / 3.0 mm / 3.2 mm / 4.8 mm / 5.0 mm / 6.0 mm, Precision :: ±0,5 %, Elec:: 230 V / 50 Hz / 1850 W , Link to the manufacturer: : .wmfts/fr-fr/flexicon/remplissage-et-controleurs-oem/remplisseuses-oem /

1 pump, made by Gardner Denver, built in 2019, 2 pump, made by Rietschle, built in 2002, 0.5 mbar (abs.), 300 m³/h, 5,5 kW, on 2 stainless steel frames,

Nemo Pump Progressing Cavity Pump Lenze 12.622.10.4 - Details see pictures

Vacuum pump Becker T 3.40 DSK; cleaned and tested; 1420 umin.; Suction volume 40m3h.; suction pressure 600 mbar; Compaction pressure 600 mbar. Vacuum pump Becker T 3.40 DSK; cleaned and checked; 1420 umin.; suction volume 40m3h.; suction pressure 600 mbar; Compression pressure 600 mbar.

Edhard Pump Cover for 2-Hole FunnelProduct descriptionManufacturer: EdhardEasy disassembly and dishwasher safeFood-safe syntheticsCompatible for funnel F-5001 / F-5005Pump cover/disc with two stainless steel shafts and sealing ring inserted. Details see pictures

Stock number: PT1572, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Lobe pump, Construction: On a stainless frame, Dimensions: L 1000 x W 400 x H 600 mm., Motor: 1,5 kW - 220/380 Volt - 287 rpm., Theoretical capacity: 3960 l/h, Dimensions inlet: Ø 1½, Dimensions outlet: Ø 1½, Manufacturer: Waukesha, Model: 030, Other: Horizontal flow - Flushed sealings

Stock number: PM1576, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Eccentric screw pump, Construction: On a stainless frame, Dimensions: L 1050 x W 250 x H 330 mm., Motor: 2,2 kW - 220/380 Volt - 1400 rpm., Theoretical capacity: 7000 l/h, Working pressure : Max 4,5 bar, Dimensions inlet: Ø 40 mm., Dimensions outlet: Ø 40 mm., Manufacturer: Mono, Type: SH40A8

ITEM NO. AT100FU-EC - Year of construction 2017 - Flow rate 1 000 / 10 000 ltr./h - Speed 900 / 1 429 rpm - Thread DN 40 - 1 year functional warranty

Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump -Manufacturer: Shibaura, Coolant pump: from Matsuura MC 710V milling machine -Type: OPSI-180W -Power: 180 W -Flow rate: 39/53 l/min -Bolt circle: Ø 160 x 10 mm -Dimensions: 200/270/H370 mm -Weight: 13.3 kg

Hydraulic pump, oil pump, gear pump, vane pump, hydraulic power unit, double hydraulic pump -Double hydraulic pump: from Battenfeld BA-T2400 injection molding machine -Drive: Siemens type 1LA6 207 30 kW 1465 rpm -Flow rate: l/min -Valves: Voith type DBV40 E25 FYM320 24 / DBV20 E25 FYM320 24 -Filter unit: Hydac -Operating pressure: bar -Dimensions: 1275/620/H500 mm -Weight: 322 kg

ITEM NO.: EM354-VA-WA - Flow rate 7 500 / 15 000 ltr./h - Speed 350 / 700 min-1 - Stainless steel housing - Connections suction side Garolla NW 120 - Connections can be customized on request - Pressure spout NW 65 - with new stator - 1 year functional warranty

Centrifugal pump, high pressure pump, water pump, multistage vertical centrifugal pump, booster pump, booster pump -Manufacturer: KSB, Movichrom high pressure pump - G 3/5 PN25 G2 -Drive: 0.75 kW -Speed: 2810 rpm -max. delivery rate: 3 m³/h -max. head: 33 m -Dimensions: 220/250/H580 mm -Weight: 34 kg

Hydraulic Pump, Oil Pump, Gear Pump, Injection Molding Machine, Injection Molding Machine, Plastic Injection Molding Machine, Plastic Injection Molding Machine, Plastic Injection Molding Press -Manufacturer: CSM -Pump type: -Digital clock: Type SPG-DIGI-B0400-B -Power: 0.55 kW 1360 rpm -Dimensions: 550/360/H380 mm -Weight: 34 kg

Hydraulic pump, oil pump, gear pump, vane pump, hydraulic power unit, double hydraulic pump -Double hydraulic pump: from KHS Krauss Maffei KM 1000-5000A injection molding machine -Pump 1: Voith type IPH 6/5-125/50 300 bar -Pump 2: Voith type IPR/H 6/5-125/40 210/300 bar -Drive: Loher 75 kW 1500 rpm -Individual components: filters/valves, see photos -Dimensions: 2285/800/H900 mm -Weight: 1132 kg

Centrifugal pump, high pressure pump, water pump, multi-stage vertical centrifugal pump, booster pump, booster pump -Manufacturer: KSB, high pressure pump Movichrom - G 9/2 PN16 G2 -Drive: 1.1 kW -Speed: 2825 rpm -Max. Delivery rate: 9 m³/h -Max. Delivery head: 22 m -Price: per piece -Number: 1 pieces -Dimensions: 250/210/H555 mm -Weight: 37 kg/piece