pump netzsch used for sale

used, kpl. 1 year warranty, plate size 400 x 400 mm, 25 plates, open outlet, 25 mm cake thickness, capacity 75 liters, filter area 6.5 m2, pressure max. 10 bar, dimensions 2000 x 800 x 1600 mm, weight approx. 800 kg

used, kpl. 1 year warranty, plate size 250 x 250 mm, 15 plates, open outlet, 15 mm cake thickness, pressure max. 15 bar, capacity 10 liters, filter area 1.5 m2, dimensions 1300 x 500 x 1300 mm, weight 300 kg, optionally with manual or motor hydraulics, with or without feeding pump and Piping

Chamber filter pressing rack Netzsch uses benefit length: 3,500 mms record transport unilaterally not available the machine served as a spare part bearer, is entire incl. wheel tins.

Filter tower with 166 nozzle filters with automatic pneumatic cleaning used Manufacturer: NETZSCH Total filter area approx. 225 m2 166 hose filters each approx. 1.36 m2 filter area Wire filter baskets approx. 120 mm length approx. 3.6 m with pneumatic cleaning 4 pneumatic knockers and compressed air loosening Collecting hopper with vibrator and blow-through lock Tower diameter outside: approx. 3.4 m incl. flange approx. 15 cm Tower height approx. 13.5 m Total dimensions with boxes for cleaning: approx. 3.4 x 4.1 x 13.5 m The filters were used in a carbon production plant. Above the filters there is a room about 4 m high, closed with a door, which makes it possible to change the filters inside. Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.

used chamber filter press / filter press Netzsch 1200 x 1200 record size: 1200x1200mm cake thickness: 30 mms benefit length: 8,200 mms chamber number: 120piece filter pressure: 15 bars record transport: at the side automatically

used membrane chamber filter press / filter press Netzsch 800 x 800 mix parcels record size: 800x800 mms cake thickness: 32 mms benefit length: 4,768 mms filter surface: 34m? filter pressure: 15 bars record transport: automatically the arrangement is in a very good state.

Revised and repainted. The images are sample photos of similar machines and are intended to show the execution and quality of the revision. All wear parts are replaced. Filter cloths new. 1 year warranty on the filter press, excluding wear parts. Panel size: 630 x 630 mm Dimensions: approx. 2000 x 1100 x 1500 mm Chamber depth: 25 mm Capacity: 210 litres Operating pressure: 12 / 15 bar Turbidity inlet: flange 2", central Number of plates: 25 plates Material sheets: Polypropylene Material cloths: PP 5009 (white) Design: open filtration Closing pressure: max. 385 bar Painting: primed and painted in RAL 5010, filter trough + drip tray in plastic. Engine hydraulics with single-acting cylinder. Optional double-acting cylinder that retracts the heavy pressure plates. With the single-acting cylinder, the operator has to push the pressure plates back by hand. Optional: fill ...

Revised and repainted. The images are sample photos of similar machines and are intended to show the execution and quality of the revision. All wear parts are replaced. Filter cloths new. 1 year warranty on the filter press, excluding wear parts. Panel size: 630 x 630 mm Dimensions: approx. 2900 x 1100 x 1500 mm Chamber depth: 25 mm Capacity: 312 litres Operating pressure: 12 / 15 bar Turbidity inlet: flange 2", central Number of plates: 40 plates Material sheets: Polypropylene Material cloths: PP 5009 (white) Design: open filtration Closing pressure: max. 385 bar Painting: primed and painted in RAL 5010, filter trough + drip tray in plastic, Engine hydraulics with single-acting cylinder. Optional double-acting cylinder that retracts the heavy pressure plates. With the single-acting cylinder, the operator has to push the pressure plates back by hand. Optional: fill ...

Type: NUP 60 Machine number.: 218338 Com.: 205639 Year of construction: 1990 with screw feeder and paddle mixers Stöber gear Type R76-1027-750-4 No.: 874256 Rpm: 136-680 RPM Drive motor: DIETZ No.: 3807028 403195 B5/300 Power: 7,5 kW Paddle mixer power: 1,5 kW Mixing trough attachment approximately 150 l stainless steel Dimensions: LWH = 2400x630x1150mm with switchgear Weight: 600 kg

Mixing hopper with 2 paddle mixers Feed screw down Pump speed control Type: NM045SP02512B Com.: 35300131 MaschNr.: 289249 Year of construction: 1997 Condition very good Pump motor Flender in ex e II Performance: 3.6 kW, 1440 min-1 Transmission Lenze speed controlled 1 Paddle mixer: speed controlled N1-n2 = 28-143 min-1 Browse gear : KW 1.35 in Exx 2. Paddle mixer: 120 min-1, 1.35 kW in Exx Dimensions: LWH = 2800x500x700mm Weight: 600 kg Mixing and pumping of viscous products with solids

Machine name: Chamber filter press used Manufacturer: Netzsch Type: 1000 /110 Year of Make: 1996 Design: Side-spar press Filter pressure: 15 bar Press capacity: approx. 2509 liters Procedure: Closed Filter area: Approx. 163 m2 Plate format: 1000 x 1000 mm Number of plates: 100 Panel Material: Polypropylene Plate Conveyor: Automatic Filter Cloth Washer: Yes Cake thickness: 30 mm Closing pressure: 385 bar Dimensions: L 9,347 x W 2,245 x H 2,435 mm Curb weight: 11,800 kg Tech. Documentation: Yes Note: It will be available from January 2025 Accessories: A control cabinet, a control cabinet, a hydraulic system, a light barrier, a filter cloth washer, a high-pressure pump and drip plates Condition: Used Price: On request

used, kpl. 1 year warranty, plate size 470 x 470 mm, 30 plates, open outlet, 25 mm cake thickness, pressure max. 15 bar, capacity approx. 130 liters, filter area 11m2, dimensions 2800 x 800 x 1200 mm, weight 850 kg, motor hydraulics, drip plate, filtrate channel, with or without filter cloths

used, kpl. 1 year warranty, plate size 400 x 400 mm, 30 plates, open outlet, 25 mm cake thickness, pressure max. 10 bar, capacity approx. 90 liters, filter area 8m2, dimensions 2500 x 700 x 1200 mm, weight 700 kg, motor hydraulics, drip plate, filtrate channel, with or without filter cloths

used, kpl. 1 year warranty, plate size 630 x 630 mm, 40 plates, open outlet, 30 mm cake thickness, pressure 7/15 bar, capacity approx. 384 liters, filter area 17m2, dimensions 4500 x 1200 x 1500 mm, weight 350 kg, motor hydraulics, automatic. Plate transport, drip plate, filtrate channel, with or without filter cloths

used, kpl. 1 year warranty, plate size 800 x 800 mm, 60 plates, open outlet, 25 mm cake thickness, pressure 15 bar, capacity approx. 800 liters, filter area 64m2, dimensions 6000 x1300 x 1500 mm, weight 5800 kg, motor hydraulics, drip plate, filtrate channel, with or without filter cloths

used, kpl. 1 year warranty, plate size 1000 x 1000 mm, 90 plates, closed outlet, 30 mm cake thickness, pressure 15 bar, capacity approx. 2300 liters, filter area 153m2, dimensions 8500 x 1600 x 2100 mm, weight 14,000 kg hydraulics, engine, automatic. Plate transport, with or without filter cloths

Stainless steel agitator container 150 l. with screw quirl, for the disconnection and mixing of solids and liquids before grinding, injection etc., incl. drive 3.6 kW via gear motor, lid with sight glass, stirring shaft with propeller (200 mm , with oxide ceramic coating). Very good condition.

Machine name: Chamber filter press used Manufacturer: Netzsch Type: 1000 /110 Year of Make: 1996 Design: Side-spar press Filter pressure: 15 bar Press capacity: approx. 2509 liters Procedure: Closed Filter area: Approx. 163 m2 Plate format: 1000 x 1000 mm Number of plates: 100 Panel Material: Polypropylene Plate Conveyor: Automatic Filter Cloth Washer: Yes Cake thickness: 30 mm Closing pressure: 385 bar Dimensions: L 9,347 x W 2,245 x H 2,435 mm Curb weight: 11,800 kg Tech. Documentation: Yes Note: It will be available from January 2025 Accessories: A control cabinet, a control cabinet, a hydraulic system, a light barrier, a filter cloth washer and drip plates Condition: Used Price: On request

Bead mill, agitator mill, shredder, crusher, grinder -Spare parts: 1x bead mill sieve, 1x bead mill screw, 1x bead mill wheel (see pictures) -Dimensions: 500/500/H165mm, 480/480/H175mm, 370/370/H70mm -Weight: 74 kg net complete

No.: 469544 Comm.: 63008879 Y.O.m.: 2014 Capacity: 3m3/h at 145 rpm 3.5m3/h at 177 rpm Pressure: 6 bar, Temp. 95°C LWH: 1500 x 200 x 300 mm Weight: approx. 80 kg on request with spare parts (rotor, stator, etc.)

Stock # U2347-3 Used mixer by Netzsch (DE) type VPI 550 with butterfly/tri-foil agitator. Mixer has contact parts designed in stainless steel. Shaft has a working length 650 mm and is equipped with butterfly agitator, with three paddles and external diameter 1080 mm. Agitator is diven by el. motor 48 kW and is hydraulically risen up to about 130 cm. Machine is equipped with local control pane and electric cabinet. Machine is also equipped with hydraulicaly operated post for mixing can. Mixing pan is not included.

Multi-knife mill with 16-blade rotor 6 stator knives Drive 90 kW With accessories

Multi-knife mill with 16-blade rotor 6 stator knives Drive 90 kW With accessories

Multi-knife mill with 16-blade rotor 6 stator knives Drive 90 kW With accessories

Bead mill Manufacturer: Netzsch Type: LMK-4 Item no.: 840490 Year of construction: 2001 Volume: 6 l Operating pressure max.: 10 bar Operating temperature: max. 50 °C Engine power: 15 kW with operating instructions with various spare parts (grinding chamber, GLD, etc.) with control cabinet and control system Mill & control panel in EEx protection Ceramic grinding chamber with pressure gauge, temperature monitoring, barrier pressure station Machine in excellent condition LWH: 1200 x 600 x 1550 mm LWH control panel: 600 x 600 x 1750 mm

Granulator for heavy duty Make NETZSCH CONDUX Type CS 500/600-4 Inlet opening approx. 600x600 mm Semi-open 5-knife rotor, 4 stator blades Drive motor 75 kw

Granulator for high loading (heavy duty) Make NETZSCH CONDUX Type CS 500/600-4 Inlet opening approx. 600x600 mm Semi-open 5-knife rotor, 4 stator blades Drive motor 75 kw

Granulator for high loading (heavy duty) Make NETZSCH CONDUX Type CS 500/600-4 Inlet opening approx. 600x600 mm Semi-open 5-knife rotor, 4 stator blades Drive motor 75 kw

Machine name: Macerator Manufacturer: Netzsch Type: NBI200 Year of Make: 2001 Speed: 1440 rpm Contents: Steel Drive motor: 5.5 kW Dimensions: L 470 x W 660 x H 1,270 mm Curb weight: 150 kg

Netzsch Omega 60 homogenisator with control cabinet. Rated flow: 60 liter/hour Maximum pressure: 700 bar.

Sigma mixer with a gross trough volume of 8 l., drive via Bauer gear motor with 1.1 kW, trough manually tiltable for emptying. Parts in contact with the product made of stainless steel. Very good condition.

Machine name: Filter press used Manufacturer: Netzsch Type: 800/32 Year of Make: 1984 Design: Side-spar press Filter pressure: 15 bar Press capacity: approx. 480 litres Procedure: Closed Filter area: approx. 34 m2 Plate format: 800 x 800 mm Number of plates: 32 Panel material: Polypropylene Plate Conveyor: Automatic Filter Cloth Washer: No Panel package length: approx. 2000 mm Cake thickness: 30 mm Closing pressure: 350 bar Dimensions: L 4,500 x W 1,700 x H 2,000 mm Empty weight: approx. 5000 kg Accessories: A control cabinet, a hydraulic system, a light barrier & drip plates. Condition: Used Price: On request

A stationary and a mobile container emptying system (drum emptying) Netzsch are available. Drum size: 100l/200l, drive power: 15kW, max. delivery pressure: 8bar, delivery rate: approx. 1000l/h, speed: 1450rpm, max. liquid viscosity: 1000Pas. Machine dimensions X/Y/Z: approx. 1700mm/1300mm/2200mm. Documentation available. An on-site inspection is possible.

General SKU323T842 MakeNetzsch TypeLME 60 LocationBarneveld Main Features MaterialMild steel/Stainless steel Volume60 Ltr. Motor55 KW Specified Features - Sand mill Horizontal sand millcheck Capacity60 ltr Housing dimensions Dia 410x1100 mm InletDia: 25 mm OutletDia: 60 mm With mechanical sealcheck With jacketcheck Motor55kW, 380 Volt, 1480 rpm (EX) Without ballscheck MaterialMild steel, Stainless steel With jacketcheck General No.204768 Year of construction1980 Mounted on framecheck With switch(as is) Floorspace2,35x1,6 mtr Total height2,3 mtr Weight2500 kg ATEX designedcheckPaints & coatingsStarchCatalysts & fillersSand millsDetergent & surf.CosmeticsFood additivesSugarConfectioneryDyes & pigmentsMinerals & inorganicNetzschIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > StarchIndustries > Chemical > Catalysts & fillersMills > Sand mills ...

General SKU292W526 MakeNetzsch TypeLMZ 25 No.204057 Year of construction1998 LocationBarneveld Main Features MaterialStainless steel Volume25 Ltr. Motor36 KW Specified Features - Sand mill Horizontal sand millcheck Capacity25 l Housing dimensions ø 345 x 570 mm InletDN50 OutletDN500 With sieve200 µm With mechanical sealcheck With jacketcheck Rotor jacketedcheck Motor36 kW (400 V, 1480 rpm (Ex)) With variable speed drivecheck MaterialStainless steel 1.4301 (304) With jacketcheck General With switchcheck Floorspace2,0 x 0,80 m Total height1,7 m Weight2300 kg ATEX designedcheckPaints & coatingsStarchCatalysts & fillersSand millsDetergent & surf.CosmeticsFood additivesSugarConfectioneryDyes & pigmentsMinerals & inorganicNetzschIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > StarchIndustries > Chemical > Catalysts & fillersMills > Sand mill ...

General SKU292W496 MakeNetzsch TypeLMZ25 No.204449 Year of construction1992 Mounted on framecheck Pressure Working pressure2.5 Bar Main Features MaterialStainless steel Volume25 Ltr. Motor37 KW Specified Features - Sand mill Horizontal sand millcheck Capacity25 Ltr. Housing dimensions Dia. 400x600 mm InletDN25 OutletDN37 With sieve0,4 mm With mechanical sealcheck With jacketcheck Motor37 kW, 380 volt With variable speed drive500-1000 rpm With jacketcheck Sand mills Motor37 kW, 380 volt, 500-1000 rpm Specified Features - Sand mill MaterialHeat-resistant stainless steel 1.4767 General LocationBarneveld With switchcheck Floorspace1,90 x 1,00 m Total height1,85 m Weight2000 kg ATEX designedcheck Technical specs Extra informationwith cooled rotor.Paints & coatingsStarchCatalysts & fillersSand millsDetergent & surf.CosmeticsFood additivesSugarConfectionery ...

General SKU292W497 MakeNetzsch TypeLMZ60 No.204.710 Year of construction1993 Mounted on framecheck Pressure Working pressure2.5 Bar Main Features MaterialStainless steel Volume62 Ltr. Motor70 KW Specified Features - Sand mill Horizontal sand millcheck Capacity62 Ltr. Housing dimensions Dia. 460x710 mm InletDN25 OutletDN50 With sieve0,6 mm With mechanical sealcheck With jacketcheck Motor70 kW, 380 volt, 450 rpm Rotor speed450 rpm Without ballscheck MaterialHeat-resistant stainless steel 1.4767, Stainless steel With jacketcheck General LocationBarneveld With switchcheck Floorspace2,20 x 1,00 m Total height2,20 m Weight3500 kg ATEX designedcheck Extra SpecificationsCooling on sievePaints & coatingsStarchCatalysts & fillersSand millsDetergent & surf.CosmeticsFood additivesSugarConfectioneryDyes & pigmentsMinerals & inorganicNetzschIndustries > Chemical > Pa ...

General SKU292W495 MakeNetzsch LocationBarneveld TypeLMZ60 Pressure Working pressure2.5 Bar Main Features MaterialStainless steel Volume62 Ltr. Motor70 KW Specified Features - Sand mill Horizontal sand millcheck Capacity62 l Housing dimensions Dia. 460 x 710 mm InletDN25 OutletDN50 With sieve0,3 mm With mechanical sealcheck With jacketcheck Motor70 kW (400 V, 450 rpm (Ex)) Rotor speed450 rpm Without ballscheck MaterialHeat-resistant stainless steel 1.4767 With jacketcheck General No.204.709 Year of construction1993 Mounted on framecheck With switchcheck Floorspace2,20 x 1,00 m Total height2,20 m Weight3500 kg ATEX designedcheck Extra SpecificationsCooling on sievePaints & coatingsStarchCatalysts & fillersSand millsDetergent & surf.CosmeticsFood additivesSugarConfectioneryDyes & pigmentsMinerals & inorganicNetzschIndustries > Chemical > Paints & coatings ...

General SKU383U1043 MakeNetzsch LocationBarneveld CEcheck TypeMastermill 3 Main Features MaterialStainless steel Volume10 Ltr. Motor2.2 KW Specified Features - Sand mill Vertical sandmillBasket Mill Capacity9 Ltr. Housing dimensions Dia. 220x250 mm InletDia. 220 mm With sievecheck With jacketcheck Motor2,2 kW With variable speed drivefrequency converter Rotor speed1100-3000 rpm With ballscheck MaterialPlexiglass/acrylic glass, Stainless steel 1.4552 With jacketcheck General No.2404563 Year of construction2015 With switchgear(as is) Floorspace1,2x0,9 m Total height1,2 m Weight630 kg ATEX designedcheck Extra SpecificationsDrive power mill, 2,2 kW, drive power stirrer 0,75 kW, mill speed 1100-3000 rpm, mixer speed 180-2600 rpm, basket volume 0,5 ltr,&:nbsp:Paints & coatingsStarchCatalysts & fillersSand millsDetergent & surf.CosmeticsFood additivesSugarConfect ...

General SKU412T1298 LocationBarneveld MakeNetzsch-Feinmahltechnik GMBH TypeLMJ1 Main Features MaterialStainless steel Volume0.7 Ltr. Specified Features - Sand mill Attritorcheck Horizontal sand millcheck Capacity± 0,7 Ltr. (inc. rotor) Housing dimensions Dia. 95x100 mm Inlet16 mm (2x) Outlet23 mm With jacketcheck Motorcheck With variable speed drivecheck With ballscheck With pumpcheck Motorcheck With variable speed drivecheck MaterialStainless steel With jacketcheck General No.204 937 Year of construction1988 Mounted on framecheck Mounted on wheelscheck With switchcheck With switchgear(as is) Floorspace1,4x0,8 m Total height1,85 m Weight300 kg ATEX designedcheckPaints & coatingsStarchCatalysts & fillersSand millsDetergent & surf.CosmeticsFood additivesSugarConfectioneryDyes & pigmentsMinerals & inorganicNetzschIndustries > Chemical > Paints & coatingsI ...

General SKU323T852 LocationBarneveld MakeNetzsch TypeLME 20 Main Features MaterialStainless steel/Mild steel Volume20 Ltr. Motor18.5 KW Specified Features - Sand mill Horizontal sand millcheck Capacity20 Ltr. Housing dimensions dia. 220x695mm With mechanical sealcheck With jacketcheck Motor18,5 kW, 380-420/655-725 Volt (Ex) Rotor speed± 700-1600 rpm MaterialMild steel With jacketcheck General No.204891 Year of construction1988 Floorspace1,5x0,7 m Total height1,8 m Weight750 kg ATEX designedcheckPaints & coatingsStarchCatalysts & fillersSand millsDetergent & surf.CosmeticsFood additivesSugarConfectioneryDyes & pigmentsMinerals & inorganicNetzschIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > StarchIndustries > Chemical > Catalysts & fillersMills > Sand millsIndustries > Chemical > Detergent & surf.Industries > Chemical > CosmeticsIndustries > ...

General SKU323T843 LocationBarneveld MakeNetzsch TypeLME 50 Main Features MaterialStainless steel Volume50 Ltr. Motor36 KW Specified Features - Sand mill Horizontal sand millcheck Capacity50 Ltr. Housing dimensions dia. 300x950mm Inlet25 mm Outlet35 mm With mechanical sealcheck With jacketcheck Motor± 36 kW, 380 Volt MaterialStainless steel With jacketcheck General No.204 909 Year of construction1980 Floorspace1.9x0,9 m Total height2,15 m Weight1380 kgPaints & coatingsStarchCatalysts & fillersSand millsDetergent & surf.CosmeticsFood additivesSugarConfectioneryDyes & pigmentsMinerals & inorganicNetzschIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > StarchIndustries > Chemical > Catalysts & fillersMills > Sand millsIndustries > Chemical > Detergent & surf.Industries > Chemical > CosmeticsIndustries > Food & Feed > Food additivesIndustries > Fo ...

General SKU323T844 MakeNetzsch LocationBarneveld TypeLME 50 Main Features MaterialStainless steel Volume50 Ltr. Motor36 KW Specified Features - Sand mill Horizontal sand millcheck Capacity50 Ltr. Housing dimensions dia. 300x950mm Inlet25 mm Outlet35 mm With mechanical sealcheck With jacketcheck Motor± 36 kW, 380 Volt MaterialStainless steel With jacketcheck General No.204 600 Year of construction1979 Floorspace1,9x0,9 m Total height2,25 m Weight1380 kgPaints & coatingsStarchCatalysts & fillersSand millsDetergent & surf.CosmeticsFood additivesSugarConfectioneryDyes & pigmentsMinerals & inorganicNetzschIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > StarchIndustries > Chemical > Catalysts & fillersMills > Sand millsIndustries > Chemical > Detergent & surf.Industries > Chemical > CosmeticsIndustries > Food & Feed > Food additivesIndustries > Fo ...

General SKU332T896 LocationBarneveld Main Features MaterialStainless steel Volume1000 Ltr. Motor55 KW Specified Features - Butterfly mixer Butterfly-mixercheck Shaft length900 mm Butterfly diameter1100 mm Motor55 kW With pans(4x) Capacity1000 Ltr. Pan sizesdia. 1200x900 mm With hydraulic liftingcheck MaterialStainless steel, Stainless steel 1.4301 (304) With jacketcheck General MakeNetsch Typeunknown missing type plate With switchgearcheck Floorspace1,6x2,5 m Total height2,6 m Weight3200 kgOils & fatButterfly mixersGeneric medicinesOintmentsCatalysts & fillersDetergent & surf.CosmeticsFood additivesDairyConfectioneryDyes & pigmentsBiopharmaceuticalMinerals & inorganicNetzschIndustries > Food & Feed > Oils & fatMixers > Butterfly mixersIndustries > Pharmaceutical > Generic medicinesIndustries > Pharmaceutical > OintmentsIndustries > Chemical > Catalysts & fillersI ...

A laboratory ball mill Netzsch is available. Drive power: 1.5kW, speed: 4200rpm, ball diameter range: 0.05mm-2mm, total ball volume: 140ml, max. product volume batch/circulation: 140ml/500ml, max. product viscosity: 5000mPas. Machine dimensions X/Y/Z: approx. 850mm/600mm/700mm, weight: approx. 100kg. Documentation available. An on-site inspection is possible.

General SKU292X391 MakeNetzsch TypePSI Mix No.2401393 Year of construction2005 LocationBarneveld Main Features MaterialStainless steel Volume15000 Ltr. Motor45 KW Specified Features - Inline mixer Mixercheck CapacityUp to 5 m³/h With jacketcheck Inline high shear mixers MaterialStainless steel 1.4829, Stainless steel 1.4301 (304) General Floor space1,90x1,60 m Total height2,20 m Weight2500 kg CEcheck ATEX designedcheck Extra SpecificationsWith rotation valve, 29 rpm, Bartec control, type BAT 300, (Ex),&:nbsp:Burgmann refill unit, type spn2063,in and output: DN80control cabinet (as is)Oils & fatGeneric medicinesOintmentsInline high shear mixersBiotechnologyAgrochemicalsCatalysts & fillersFeed additivesDetergent & surf.Other pharmaceuticsCosmeticsFood additivesLubricants & oleoDairyAnimal feedConfectioneryBeveragesDyes & pigmentsNetzschIndustries > Food & Feed > Oi ...

General SKU426S1057 MakeNetzsch LocationBarneveld Type021 Pressure Working pressure15 Bar Main Features MaterialPolypropylene Pressure15 Bar Surface8 m2 Specified Features - Filterpress Filter presscheck Filter surface8 m² Number of platens32 Number of frames2 Internal platen sizes370x370 mm External platen sizes470x470 mm Platen thickness41 mm Frame thickness14 mm Cake capacity112 Ltr. Central inlet40 mm With outlets on platenscheck With hand valvescheck Hydraulic closingcheck With hydraulic unit(hand press) Manual operated closingcheck Manual openingcheck MaterialPolypropylene General No.040001832 Year of construction2001 With switchcheck Floorspace2,6x1,1 m Total height1,7 m Weight1080 kgPowdered foodsGeneric medicinesTea, herbs & coffeeFine chemicalsStarchBiotechnologyAgrochemicalsPlastic & polymersFilterpressesCatalysts & fillersFeed additivesDet ...

General SKU409X1224 MakeNetzsch LocationBarneveld CEcheck TypeZeta RS2 Main Features MaterialStainless steel Volume2 Ltr. Motor15 KW Specified Features - Sand mill Horizontal sand millcheck Capacity2 l Housing dimensions dia 150 x 200 mm InletDN15 OutletDN15 With mechanical sealcheck With jacketcheck Motor15 kW, 400 volt, (Ex) With variable speed drivecheck Rotor speed500-2250 rpm With pumpcheck Motor0,55 kW, (Ex), With variable speed drive26-447 l/h, MaterialCeramic, Stainless steel 1.4301 (304) With jacketcheck General No.2800799-10 Year of construction2018 Mounted on frameon legs With switchgearcheck Floorspace1,620 x 0,995 m Total height1,760 m Weight1100 kg Extra SpecificationsWith blocking fluid vessel, flow meter, control/power cabinet, touchscreen control.Paints & coatingsStarchCatalysts & fillersSand millsDetergent & surf.CosmeticsFood additive ...

General SKU409X1227 MakeNetzsch LocationBarneveld CEcheck TypeZeta RS2 Main Features MaterialStainless steel Volume2 Ltr. Motor15 KW Specified Features - Sand mill Horizontal sand millcheck Capacity2 l Housing dimensions dia 150 x 200 mm InletDN15 OutletDN15 With mechanical sealcheck With jacketcheck MotorV With variable speed drivecheck Rotor speed500-2250 rpm With pumpcheck Motor0,55 kW, (Ex), With variable speed drive26-447 l/h, MaterialCeramic, Stainless steel 1.4301 (304) With jacketcheck General No.2800170-10 Year of construction2016 Mounted on frameon legs With switchgearcheck Floorspace1,620x0,995 m Total height1,760 m Weight1100 kg Extra SpecificationsWith pump, 0,55 kW, (Ex), 26-447 l/h, blocking fluid vessel, flow meter, control/ power cabinet, touchscreen control.Paints & coatingsStarchCatalysts & fillersSand millsDetergent & surf.CosmeticsF ...