136,829 used machines on RESALE, but how to find them? Machine Search
Crane block, crane hook, load hook, single hook, lower block, rope pulley cover, rope sheave cover set -Manufacturer: Demag, Rope pulley cover set, rope roller cover set, unused, original packaging -Type:280 2/1 -Item No.: 47926133 -Lid: Ø 350 mm -Quantity: 1 set available -Transport dimensions: 460/460/H120 mm -Weight: 5.8 kg
Crane block, crane hook, load hook, single hook, lower block, rope pulley cover, rope sheave cover set -Manufacturer: Demag, Rope pulley cover set, rope roller cover set, unused, original packaging -Type: 2/1 2m -Item No.: 82930533 -Lid: Dimensions 450 x 450 mm -Quantity: 2 sets available -Price: per set -Transport dimensions: 460/460/H120 mm -Weight: 11.5 kg/set
Material Name: Gearbox pulley 4 SPB 180mm - 6 lines x 2 Material Brand: Generic Model: 4SPB 180 Material Type: V-belt pulley Material Specification: Cast Iron PLEASE CONTACT AARON : +6017-369 8203 LOCATION: F11AW5 (F49)
Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punching die, corner notching punch, punching punch, square notching punch, notching punch, notching tool -Withdrawal device: for square notching dies -Dimensions: see photos -Quantity: 2x pullers, 1x with fine thread -Submission/Price: complete -Dimensions each: 200/140/90 mm -Weight: 2.4 kg/pc.
Material Name: Motor pulley 4 SPB 150mm - 6 line x 2pcs Material Brand: Generic Model: 4SPB 180 Material Type: V-belt pulley Material Specification: Cast Iron PLEASE CONTACT AARON : +6017-369 8203 LOCATION: F11AW5 (F49)
- Brand manufacturers - draws lines from finished dies - Safe - Fast
pressure: 500 t distance between columns: 1220 mm max. ram stroke: 600 mm distance table/ram, max. stroke up, adjustment up: 1000 mm table surface area: 1600 x 1200 mm die-cushion pressure inside the table: 320 t stroke of drawing cushion in table: 150 mm drawing cushion surface in table: 750 x 812 mm die-cushion pressure in pusher: 180 t stroke of drawing cushion in pusher: 100 mm drawing cushion surface in pusher: 750 x 625 mm ram surface: 1600 x 1200 mm table height over floor: 800 mm feed down: 665 mm/sec feed up: 530 mm/sec working feed: 34 - 100 mm/sec quantity of oil: 2000 l power capacity: 180 kW weight: 40 t dimensions of the machine ca.: 3,2 x 2,4 x 7,5 m by using oil-hydraulic drive, hydraulic and electric control UVV, die cushion in bed and slide, adjustable drawing speed, punching limit with damping plunger lock, electric cabinet Our list price is WITHOUT starting the machin ...
pressure: 63 t distance between columns: 680 mm stroke: 150 mm total power requirement: 15 kW weight of the machine ca.: 7 t dimensions of the machine ca.: 3 x 3 x 3 m No. 0214 ydraulic high-speed double-column press SMG DS 63 Clearance between the uprights 680 mm, max. distance between table top and ram 385 mm, Ejector force 15kN, largest ram stroke 150 mm. Working area: Table surface 660 x 460 Drive: 15 kW pressing force 630 kN, retraction force 51 kN The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Replacement column for IDRA OL1800, extendable, D260mmx6710mm, (11), 111801, Idra, refurbished Refurbished! - The column has been refurbished by Strate and is ready for immediate use. - Sourced from the spare parts stock of a certified manufacturing facility, - In top condition and fully functional. Special price Replacement column for IDRA OL1800, D260mm x 6710mm, can be pulled out trapezoidal thread TR 260x9mm, approx. 2800kg We store the column in a dry, thermally insulated room. The column can be viewed, inspected and collected from us at any time. We would also be happy to send you a sketch of the design or deliver the goods to your address. Please note: We offer various columns, adjusting nuts, strut expansion nuts and two-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D370, D330, D300 Ensuring the function: In ...
Replacement column for IDRA OL1800, extendable, D260mmx6710mm, (12), 211286. Idra, refurbished Refurbished! (top condition) - The column has been refurbished by Strate and is ready for immediate use. - It is still in its original Strate delivery packaging. - Sourced from the spare parts stock of a certified manufacturing facility, - In top condition and fully functional. Special price Replacement column for IDRA OL1800, D260mm x 6710mm, can be pulled out trapezoidal thread TR 260x9mm, approx. 2800kg We store the column in a dry, thermally insulated room. The column can be viewed, inspected and collected from us at any time. We would also be happy to send you a sketch of the design or deliver the goods to your address. Please note: We offer various columns, adjusting nuts, strut expansion nuts and two-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Ca ...
3-axis digital display 3-jaw chuck 200 mm.4-jaw chuck 200 mm.Face plate 320mm steady rest fixed bezel with 4-fold steel holder. Halogen machine light Machine light Foot brake Removable chip pan, chip protection wall Hardened and ground bed tracks Complete coolant system Chuck protection Machine tools Turning diameter over bed 400 mm Turning diameter over support 264 mm Turning length 1000 mm Turning diameter in offset 550 mm Speed 44 - 2000 rpm Center height 200 mm Spindle bore 52 mm Tailstock quill holder MK 4 MK Connection voltage 400 V Total power requirement 1.5 / 2.4 kW Machine weight approx. 0.9 t Dimensions approx. 1.9 x 0.8 x 1.56 m Condition: never used / new (5) Auction-ID: A7-51438-557
Lathes with: - 4-fold steel holder - 3-jaw chuck 315mm - Centering tip Turning diameter over bed 500 mm Turning diameter over support 320 mm Turning length 2100 mm Center height 250 mm Spindle bore 60 mm Spindle speeds 11 - 2000 rpm Total power requirement 7.0 kW Machine weight approx. 2.9 t Space requirement approx. 4.3 x 1.2 x 1.3 mm Condition: functional Auction-ID: A7-51438-438
Professional lathe Digital display 3-jaw chuck 4-jaw chuck Face plate Bezel fixed Bezel running quick-change steel holder with 4 cassettes Halogen machine light Chip tray, chip barrier Hardened and ground bed tracks Complete coolant system Chuck protection Machine tools Running center tip Turning diameter over bed 320 mm Turning diameter over support 200 mm Turning length 900 mm Speed 75 - 2000 rpm Center height 160 mm Spindle bore 50 mm Tailstock quill holder MK 3 MK Connection voltage 230 V Total power requirement 1.5 kW Machine weight approx. 0.29 t Space requirement approx. 2.0 x 0.8 x 1.56 m Condition: never used / new (5) Auction-ID: A7-51438-442
Guide and tension spindle lathe Three-jaw chuck 200mm Multifix steel holder size B 3 pcs Multifix cassettes Emergency stop device Turning diameter over bed 370 mm Turning diameter over support 200 mm Turning length 1000 mm Center height 185 mm Spindle bore 56 mm Tailstock quill holder MK 4 Speed 50 - 2000 rpm Drive power 4.0 kW Machine weight approx. 1.4 t Dimensions approx. 2.3 x 1.1 x 1.3 m Condition: untested Auction-ID: A7-51438-403
Guide and tension spindle lathe - 3-jaw chuck 160mm - Face plate - Replacement jaws - Quick-change steel holder base body - 3 pcs. steel holder - 2 pcs. steady rest- Moving center punch- Chip pan Turning diameter over bed 320 mm Turning diameter over support 180 mm Turning length 1000 mm Turning diameter in offset 460 mm Speed 70 -2000 rpm Center height 160 mm Spindle bore 27 mm Total power requirement 2.0 KW Machine weight approx. 0.7 t Dimensions approx. 1.8 x 1.2 x 1.6 m Condition: functional Auction-ID: A7-51438-433
3-jaw chuck 200mm 4-fold steel holder Turning diameter 350mm Turning diameter over support 210 in offset 500mm Turning length 1000mm Speed 20 - 1400rpm Spindle bore 36mm Motor 2.0 KW Weight 600Kg Dimensions 2.2 x 1.0 x 1.5m Condition: functional Auction-ID: A7-51438-493
Guide and pull spindle turning machine - with copying device - 3-jaw chuck 200mm - 2 pcs. Mutifix quick-change steel holder - Moving center punch- Machine light - Chip pan Turning diameter over bed 410 mm Turning diameter over support 260 mm Turning length 1000 mm Turning diameter in the offset mm Speed 40 - 2000 rpm Center height 205 mm Spindle bore 50 mm Total power requirement 4.5 KW Machine weight approx. 1.6 t Space requirement approx. 2.4 x 1.3 x 1.5 m Condition: functional Auction-ID: A7-51438-510
Guide and tension spindle lathe - 4-jaw chuck 200mm - Multifix steel holder size B - Foot brake - Chip tray Turning diameter over bed 420 mm Turning diameter over support 290 mm Turning length 900 mm Speed 40 - 2000 rpm Center height 210 mm Spindle bore 38 mm Total power requirement 4.0 KW Machine weight approx. 0.9 t Dimensions approx. 2.4 x 1.1 x 1.3 m Condition: functional Auction-ID: A7-51438-499
SINO digital display 3-jaw chuck 200 mm.4-jaw chuck 200 mm.Face plate 250mm Fixed steady rest Quick-change steel holder with 4 pcs. Steel holder Machine light Chip tray, chip protection wall Hardened and ground bed tracks Chuck protection Machine tools Turning diameter over bed 320 mm Turning diameter over support 200 mm Turning length 900 mm Turning diameter in the offset 320 mm Speed 75 - 2000 rpm Center height 160 mm Spindle bore 38 mm tailstock quill holder MK 3 Connection voltage 400 V Total power requirement 1.5 kW Machine weight approx. 0.4 t Space requirement approx. 1.6 x 0.75 x 1.7 m Condition: never used / new (5) Auction-ID: A7-51438-500
Lead and pull spindle lathe with - 2-axis digital display - 3-jaw wedge rod chuck Forkardt 200 mm - Multifix Gr.B - Lighting Turning diameter over bed 400 mm Turning diameter over support 230 mm Turning length 900 mm Turning diameter in the bridge mm Spindle bore 45 mm Speed 31.5-1000 rpm Tailstock quill holder MK MK4 Total power requirement 4 kW Machine weight approx. 1.8 t Dimensions approx. 2.1 x 1.4 x 1.8 m Auction-ID: A7-51438-538
Guide and pull spindle turning machine - Forkardt 3-jaw chuck F 315 - Single steel holder - Steady rest - Running center punch- Chuck protection, limit switch monitored - Chip tray Turning diameter over bed 600 mm Turning diameter over support 400 mm Turning length 1000 mm Turning diameter in the offset 850 mm Speed 15 - 810 rpm Center height 300 mm Spindle bore 56 mm Total power requirement 9.0 KW Machine weight approx. 2.9 t Dimensions approx. 2.8 x 1.45 x 1.65 m Condition: functional Auction-ID: A7-51438-417
Professional lathe 3-jaw chuck 4-jaw chuck Face plate Fixed steady rest Steady rest running quick-change steel holder with 4 cassettes Halogen machine light Chip pan, chip protection wall Hardened and ground bed sheets Complete coolant system Chuck protection Machine tools Turning diameter over bed 320 mm Turning diameter over support 200 mm Turning length 900 mm Speed 75 - 2000 rpm Center height 160 mm Spindle bore 50 mm tailstock quill holder MK 3 Connection voltage 230 V Total power requirement 1.5 kW Machine weight approx. 0.29 t Dimensions approx. 2.0 x 0.8 x 1.56 m Condition: never used / new (5) Auction-ID: A7-51438-498
3-axis digital display 3-jaw chuck 200 mm.4-jaw chuck 200 mm.Face plate 320mm steady rest fixed bezel with 4-fold steel holder. Halogen machine light Machine light Foot brake Removable chip pan, chip protection wall Hardened and ground bed tracks Complete coolant system Chuck protection Machine tools Turning diameter over bed 400 mm Turning diameter over support 264 mm Turning length 1000 mm Turning diameter in offset 550 mm Speed 44 - 2000 rpm Center height 200 mm Spindle bore 52 mm Tailstock quill holder MK 4 MK Connection voltage 400 V Total power requirement 1.5 / 2.4 kW Machine weight approx. 0.9 t Dimensions approx. 1.9 x 0.8 x 1.56 m Condition: never used / new (5) Auction-ID: A7-51438-514
Professional Industrial Machine Digital Display 3-Jaw Chuck 200 mm.4-Jaw Chuck Face Washer Bezel Fixed Bezel Running Multifix Steel Holder. Machine light Foot brake Chip pan, chip protection wall Hardened and ground bed tracks Complete coolant system Chuck protection Machine feet Machine tool Turning diameter over bed 400 mm Turning diameter over support 260 mm Turning length 1500 mm Turning diameter in offset 570 mm Speed 45 - 1800 rpm Center height 210 mm Spindle bore 52 mm Tailstock quill mount MK 4 Connection voltage 400 V Total power requirement 3.5 kW Machine weight approx. 1.5 t Space requirement approx. 2.6 x 1.1 x 1.7 m Condition: never used / new Auction-ID: A7-51438-424
Professional industrial machine (400Volt) 3-axis digital display 3-jaw chuck 180 mm.4-jaw chuck 200 mm.Face plate 280mm steady rest steady rest 4-fold steel holder. Halogen machine light Machine light Foot brake Removable chip tray, chip protection wall Hardened and ground bed tracks Complete coolant system Chuck protection Machine tools Turning diameter over bed 360 mm Turning diameter over support 220 mm Turning length 1000 mm Turning diameter in the offset 380 mm Speed 70 - 2000 rpm Center height 180 mm Spindle bore 50 mm Tailstock quill holder MK 3 MK Connection voltage 230 V Total power requirement 1.8 kW Machine weight approx. 0.65 t Dimensions approx. 2.0 x 0.8 x 1.56 m Condition: never used / new (5) Auction-ID: A7-51438-571
Grundig GEHM19310B multifunctional stove set with built-in stove and stove-mounted glass-ceramic hob. • Cooking chamber volume: 72 l • Energy efficiency class A+ on the scale A+ to D • HotAero Pro for even heat distribution • Nine heating modes, including hot air, top/bottom heat, grill, pizza and defrost • Steam cleaning and easy-care enamelling • 3-fold telescopic focuser • Soft Doormatic for soft closing of the oven door • Removable inner glass • Digital display and retractable control knobs • Four glass-ceramic cooking zones with dual-circuit and roasting zones • Residual heat indicators and stainless steel frame • Total connected load: 11.1 kW • Stove dimensions (W × D × H): approx. 59.4 × 56.7 × 59.5 cm • Hob dimensions (W × D × H): approx. 57.6 × 50.7 × 3.5 cm Serial number: 23 109741 07. Sold as a set of stove and hob. Auction-ID: A1-51488- ...
Grundig GEHM19310B multifunctional stove set with built-in stove and stove-mounted glass-ceramic hob. • Cooking chamber volume: 72 l • Energy efficiency class A+ on the scale A+ to D • HotAero Pro for even heat distribution • Nine heating modes, including hot air, top/bottom heat, grill, pizza and defrost • Steam cleaning and easy-care enamelling • 3-fold telescopic focuser • Soft Doormatic for soft closing of the oven door • Removable inner glass • Digital display and retractable control knobs • Four glass-ceramic cooking zones with dual-circuit and roasting zones • Residual heat indicators and stainless steel frame • Total connected load: 11.1 kW • Stove dimensions (W × D × H): approx. 59.4 × 56.7 × 59.5 cm • Hob dimensions (W × D × H): approx. 57.6 × 50.7 × 3.5 cm Serial number: 23 109279 07. Sold as a set of stove and hob. Auction-ID: A1-51488- ...
Grundig GEHM19310BP built-in stove set consisting of multifunctional stove and stove-mounted glass-ceramic hob. Version in black glass with stainless steel. • Cooking chamber volume: 72 l • Energy efficiency class A+ on the scale A+ to D • Pyrolytic self-cleaning • HotAero Pro for even heat distribution • Nine functions, including hot air, eco hot air, top/bottom heat, convection, large area grill and bottom heat • Additional steam cleaning • 3-fold telescopic focuser • Four-glazed cool-touch door with removable inner glass • Digital display and retractable control knobs • Key lock and door lock in pyrolysis • Four glass-ceramic cooking zones with dual-circuit and roasting zones • Residual heat indicators and stainless steel frame • Stove dimensions (W × D × H): approx. 59.4 × 56.7 × 59.5 cm • Hob dimensions (W × D × H): approx. 57.6 × 50.7 × 3.5 cm ...
maximum number of results exceeded
please refine your search
100 € 
