pull used for sale

turning diameter over bed: 320 mm turning diameter over slide rest: 200 mm turning length: 900 mm turning diameter in the gap: 320 mm turning speeds: 75 - 2000 U/min centre height: 160 mm spindle bore: 38 mm tailstock quill taper MT: 3 connected load frequency: 400 V total power requirement: 1,5 kW weight of the machine ca.: 0,4 t dimensions of the machine ca.: 1,6 x 0,75 x 1,7 m SINO digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 250mm bezel fixed Quick-change steel holder with 4 pcs. steel holder machine light Chip tray, chip protection wall Hardened and ground bed tracks lining protection machine tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drawer rail, telescopic rail, drawer extension, drawer rails, drawer extension, Telescopic rails, pull-out rails, heavy-duty pull-outs -Length retracted: 500 mm -Length extended: 980 mm -Width: 22 mm/height: 69 mm -Price: per pair (left right) -Number: 2x pairs available -Weight: 4.45 kg

Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Roll diameter: 248 mm -Transport roller width: 610 mm -Hole: Ø 30 x 60 mm, Ø 25 x 75 mm -Dimensions: Ø 248 x 840 mm -Weight: 27 kg

Drawer rail, telescopic rail, drawer extension, drawer rails, drawer extension, Telescopic rails, pull-out rails, heavy-duty pull-outs -Length retracted: 550 mm -Length extended: 1085 mm -Width: 16 mm/height: 61 mm -Price: per pair (left right) -Weight: 2.7 kg

Pin Puller, Pneumatic Pin Pulling Cylinder FESTO stroke: 24 mm rod diameter: Ø 30 mm Pneumatic cylinder: ADVU-50-25-PA 156553 0.8 - 10 bar New ! Dimensions: 290 x 90 x 150 mm

Eckeneinziehmaschine / Corner Pulling Machine BEIER EZf Serial-Nr. 3555 Manuelle Bedienung / Manuell Operation

Drawer rail, telescopic rail, drawer extension, drawer rails, drawer extension, Telescopic rails, pull-out rails, heavy-duty pull-outs -Length retracted: 400 mm -Length extended: 695 mm -Width: 15 mm/height: 42 mm -Price: per pair (left right) -Number: 12x pairs available -Weight: 1.95 kg

V-belt pulley, belt pulley -Diameter: 508 mm -Total width: 120 mm -Straps: 6 -V-belt width: 17 mm -Socket: Ø 59 mm -Pulley: balanced -Weight: 46 kg -other pulleys: in stock

Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Roll diameter: 247 mm -Transport roller width: 607 mm -Square mount: 25 x 25 x 30 mm -Dimensions: Ø 247 x 607 mm -Weight: 21 kg

Pin Puller, Pneumatic Pin Pulling Cylinder FESTO stroke: 48 mm rod diameter: Ø 30 mm Pneumatic cylinder: ADVU-50-50-PA 156556 0.8 - 10 bar New ! Dimensions: 375 x 90 x 150 mm

V-belt pulley, pulley -Recess: Ø 150 -Diameter: 310mm -Strap: 1 -V-belt width: 10 mm -Receptacle: Ø 60 mm -Weight: 17kg

Grinding wheel puller, cup wheel puller, double bench grinder puller, flat grinder puller, cylindrical grinder puller, puller head, dressing head for grinding machines -Support: 150 mm -Number: 1x disc puller available -Price: per piece -Dimensions: 192/94/H128 mm -Weight: 5.3 kg

CNC drawbar, tool holder, tool holder, milling tool holder - Quantity: 28 pieces -with: ring groove -for: SK50 recordings -Thread: M24 - Price: complete -Weight: 6.8 kg

Grinding wheel pullers, cup wheel pullers, double bench grinder pullers, surface grinder pullers, cylindrical grinder pullers, dressing heads, dressing heads for grinding machines -Coverage: 255 mm -Quantity: 1x disc puller included Price: per piece -Dimensions: 510/165/H290 mm -Weight: 34 kg

Tension cylinder single-sided with spring retraction YALE YPL-10/150 force approx. 10 t cylinder diameter: Ø 68 mm rod: Ø 30 mm stroke: 150 mm width retracted: approx. 745 mm used !' weight: 9.1 kg Dimensions: 800 x 180 x 70 mm

electronic clamping elements, twist-and-turn clamps -Clamping force: 160 kN -stat. max.: force 30 kN -Clamping stroke: 15 mm -Total stroke: 60 mm -Dimensions: 720/200/H220 mm -Weight: 60 kg

V-belt pulley, pulley -for compressor with blades -Diameter: 620mm -Strap: 2 -V-belt width: 13 mm -Receptacle cone: 17/25 mm long -Weight: 18kg -only one piece available

V-belt pulley, belt pulley -Diameter: 322 mm -Total width: 185 mm -Straps: 8 -V-belt width: 17 mm -Take: Ø 90 mm -Pulley: balanced -Number: 2x pulleys available -Price: per piece -Weight: 38 kg -other pulleys in stock

Elevator pulley SCHWARTZ VET 11 50161/1a VET 1560058113/1 XUR 13-ag 500 / 85 - 370 Zd Roller diameter: 324 mm Roller width: 125 mm Rope width: 8 mm ball bearing SKF 6211-2RS1/C3 Shaft: Ø 55 mm New ! Dimensions: 324 x 324 x 125 mm

Transnorm conveyor belt GF 13900-600-500 RA2450 Technical data: Conveyor length (NL): 13900 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, R40 DT80N4 Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Small 25mm pulley for low-gap transfer Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 13900 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW ...

V-belt pulley, belt pulley -Diameter: 450 mm -Total width: 130 mm -Straps: 6 -V-belt width: 17 mm -Take: Ø 90 mm -Pulley: balanced -Weight: 48 kg -other pulleys in stock

Safety Rope Pull Switch SCHMERSAL ZS 73 1Ö/1S VD ( ZS731Ö/1SVD ) 1179654 73141925 Pulling force: 120 - 180 N 400 V IP54 without thimble! New ! Dimensions: 165 x 105 x 75 mm

turning diameter over bed: 400 mm turning diameter over slide rest: 264 mm turning length: 1000 mm turning diameter in the gap: 550 mm turning speeds: 44 - 2000 U/min centre height: 200 mm spindle bore: 52 mm tailstock quill taper MT: 4 MK connected load frequency: 400 V total power requirement: 1,5 / 2,4 kW weight of the machine ca.: 0,9 t dimensions of the machine ca.: 1,9 x 0,8 x 1,56 m 3-axis digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 320mm bezel fixed running bezel 4-fold steel holder. Halogen machine light machine light foot brake removable chip tray, chip protection wall Hardened and ground bed tracks Complete coolant system lining protection machine tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

V-belt pulley, pulley with taper bushing, taper tensioning bushing, taperlock tensioning bushing -Diameter: 507mm -Total width: 158 mm -Strap: 8 -V-belt width: 17 mm -Taper socket recording: Ø 70 mm (can be changed) -Pelt: balanced -Weight: 61kg -other pulleys in stock

V-belt pulley, belt pulley -Diameter: 570 mm -Total width: 237 mm -Straps: 9 -V-belt width: 22 mm -Take: Ø 90 mm -Pulley: balanced -Weight: 127 kg -other pulleys in stock

V-belt pulley, pulley -Diameter: 460 mm -Overall width: 278 mm -Belts: 10 -V-belt width: 22 mm -Hole: Ø 95 mm -Pulley: balanced -Weight: 144 kg -other pulleys in stock

CNC pull studs, tool holder, tool holder, milling holder, milling tool -Number: 13 pieces -with: ring groove -for: SK40 holders -Thread: M10 -Price: complete -Weight: 0.3 kg

V-Belt Pulley, Taperlock V-Pulley PAGUS SPB450-8 Number of grooves: 8 Diameter: Ø 450 mm Wreath width: 158 mm Insert for taper bushing: 4040 matching taper bushing S769 ! used, tested !' Dimensions: 460 x 460 x 160 mm

Pull-off trolley for 240cm deep pull-offs NEUWagen profile 40x40mm screwedExternal dimensions: W: 251cm D: 64cm H: 190cmInternal dimensions: W: 243cm D: 64cmSee pictureWe have various large pullers and pull-off trolleys in stockDetails see pictures

CNC pull studs, tool holder, tool holder, milling holder, milling tool -Number: 8 pieces -with: ring groove -for: SK40 holders -Thread: M16 -Price: complete -Weight: 0.6 kg

Payload 5,000 kg Lifting height 15 meters Strand count 2 Load chain 10 x 30 Uncoiling of the hand chain per meter of stroke - 174 m Lifting capacity at nominal load 34 daN Weight approx. 115 kg 1 piece(s) in stock - unit price

Scraper for 194cm deep pullers NEUWagen profile 40x40mm screwedExternal dimensions: W: 207cm D: 64cm H: 180/190cm10 supportsInterior dimensions: W: 197cm D: 64cmSee pictureWe have various large pullers and pullers in stockDetails see pictures

Toothed belt pulley, slewing ring, -Toothed belt pulley: with drive shaft -Pulley: Ø approx. 63 mm -Belt width: 15 mm -Shaft: Ø 19 x 19 mm / Ø 20 x 38 mm -Measurements: see photos -Dimensions: Ø 66 x 77 mm -Weight: 0.5 kg

V-belt pulley, pulley with taper bushing, taper tensioning bushing, taperlock tensioning bushing -V-belt pulley: pulley Ø 243 mm -V-belt width: 17 mm -Taper socket recording: Ø 30 mm (can be changed) -Dimensions: Ø 243 x 30 mm -Weight: 5kg

: 32 mm : 12 mm stroke: 330 mm pulling capacity: 3,0 t total power requirement: 1,2 kW weight of the machine ca.: 0,65 t dimensions of the machine ca.: 1,2 x 0,8 x 1,2 m Keyway broaching and slotting machine with accessories as shown. Good condition. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Puller for 200cm deep pullers NEUWagen profile 40x40mm screwedExternal dimensions: W: 213cm D: 64cm H: 180/190cmInterior dimensions: W: 203cm D: 64cmSee pictureDo we have various large pullers and pullers in stockDetails see pictures

V-belt pulley, pulley -V-belt pulley: single-groove pulley Ø 125 mm -V-belt width: 13 mm -Receptacle: Ø 24 x 32 mm -Quantity: 7x pulleys available -Price per piece -Dimensions: Ø 130 x 32 mm -Weight: 0.7 kg/pc.

Mechanical pull-down NC Machine vise FRIBOSA Type Size BPrision machine vice, grinding vice, clampJaw width 100 mmJaw height 34 mmWingspan 0 to 130 mmGuideway height 40 mmGuideway length 270 mm- Mechanical machine vice- Clamping area via trapezoidal spindle- Stable base body ground on all sides- Can be clamped horizontally, vertically or laterallyDimensions L x W x H 310 x 100 x 77 mmWeight: 10 kgGood condition; used

V-belt pulley, pulley -V-belt pulley: single-groove pulley Ø 125 mm -V-belt width: 13 mm -Receptacle: Ø 30 x 32 mm -Quantity: 4x pulleys available -Price per piece -Dimensions: Ø 130 x 32 mm -Weight: 0.7 kg/pc.

V-belt pulley, belt pulley -V-belt pulley: pulley 5 grooves Ø 157 mm - V-belt width: 17 mm -Intake: Ø 42 mm -Number: 1x pulley available -Dimension: Ø 157 x 114 mm -Weight: 8.1 kg

Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Transport roller: diameter 240 mm -Transport width: 1150 mm -Shaft: Mounting Ø50 x 185 mm -Quantity: 1 piece available -Total dimensions: Ø 240 x 1520 mm -Weight: 88 kg

Max. saw blade diameter: 420 mm Cutting height: 170 mm Mitre range swivel with digital display: 45°-90°-25° Miter range tilt with digital display: 90°-45° Hydraulic feed brake Pneumatic material tensioners Saw blade spraying device Hand crank for tilting

Puller Wipes 3920x560mm NEW6 EyeletsWe have different large puller wipes in stockDetails see picture Please measure your wipes from one side to the other after purchase, an exchange or return is excluded it is only for tradespeople.

Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Transport roller: diameter 322 mm -Transport width: 750 mm -Shaft: Mounting Ø40 x 95 mm -Quantity: 1x transport roller available -Total dimensions: Ø 322 x 940 mm -Weight: 62 kg/piece

Puller Cloths 2100x560mm NEW( 4 Pieces )Puller Cloths 2100x560mm NEWProductor Dimensions : W: 2100mm T: 560mm5 EyeletsWe have various large puller wipes in stockDetails see picture Please measure your wipes from one side to the other after purchase an exchange or return is excluded it is only for tradespeople.

Pullers Hooks  NEW!  ( 2 pieces )For 580 mm deep, 40 mm thick pullers7 screwsBracket bottom Made of stainless steel see picture for details 

V-belt pulley, pulley with taper bushing mount, taper tensioning bushing, taper lock tensioning bushing -V-belt pulley: 4-groove pulley 280/4 -V-belt width: 17 mm -Taper bushing mount: Ø 65 mm (can be replaced) -Quantity: 1x V-belt pulley available -Dimensions: Ø 287 x 82 mm -Weight: 14.4 kg

V-belt pulley, pulley with taper bushing, taper tensioning bushing, taperlock tensioning bushing -V-belt pulley: pulley 4 grooves 250/4 -V-belt width: 17 mm -Receptacle: Ø 100 mm for taper bushing 3020 (can be changed) -Quantity: 1x pulley available -Dimensions: Ø 260 x 82 mm -Weight: 5.8kg