pu used for sale

Stamping jar Simplacutter, 72 x 102 cm, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

Immediately available completely overhauled injection pump

Immediately available new raw water pump

Immediately available used hand pump

Immediately available used fuel transfer pump

Immediately available overhauled lubricating oil pump, even used ones we have all in stock

Water pump, new suitable for MAN D2842, cf. original MAN number: 51.06500.6470

Fuel Pump for Yanmar 6N18AL Engine cf. Yanmar Part Number: 746673-51201

Bosch Injection Pump for MAN D2842 LE211 with GAC controller, cf. MAN part number: 51.11103-7451 59.11103-7451 N (l/min): 750 RW (mm): 12.7 or 13.6 EPP-FM (mm³/H): 332 or 367

Water pump with external coupling, without motor Type: VACST-L020107DIIG

Rotary Vane Vacuum Pump RC 0100E 5Z1 Pumping speed approx. 100 m³/h Vacuum: 20 mbar 400V/50Hz More items in other sizes - new and used - can be found in our shop! International shipping costs on request!

Water Pump for MWM 232 for Sale MWM Part Number: 6.232.0.952.0020 ; 623209520020 ; 623203810470 ; 623207310010 ; 623409520090

Bosch Injection Pump for MWM 232 for sale Bosch Number: 62801845

MWM 232 / 234 Water Pump MWM Part Numbers: 6.232.0.731.0010 ; 623207310010

GRUNDFOS Vertical centrifugal pump CRN90 X-F-G-E HQQE 3x400V 45kW Model No: B96610310P11431 This pump is only sold by bid. Make a fair offer, then we will agree. The sale is subject to exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of the Seller's duties or to any injury to life, limb and health

GRUNDFOS Vertical centrifugal pump CRN90 X-F-G-E HQQE 3x400V 45kW Model No: B96610310P11431 This pump is only sold by bid. Make a fair offer, then we will agree. The sale is subject to exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of the Seller's duties or to any injury to life, limb and health

Hang Folder Grip Hole Eye Machine Automatic Hole & Eye Insertion Machine Type: 115 G3P Year of construction is not known. This machine has not been used for 10 years, and is in good condition

WHEEL.GEAR.GEAR, OIL PUMPDRIBE

Flowtech Flowboost 2V JH1 water pump system with tanks 2023, Two station pump unit with flow meters, 0.9Kw rating per pump, with 6000l insulated tank 2100mm x 2100mm x 1500mm, pumps in housing, 3Ph

coolant capacity: 20 m3l/h Headroom: 20 m operating pressure: 2 bar voltage: 380/660 V / 60 Hz motor type: LA 3166 motor speed: 1460 U/min Motor Capacity: 15 kW weight: 250 kg normal priming centrifugal pump, Housing and impeller made of stainless steel, Flange connections, Fabr. no. 22/00-125616 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

coolant capacity: 50 - 250 m3l/h Headroom: 5 - 12 m operating pressure: max 1,2 bar voltage: 380 V / 50 Hz motor type: 132 M 4 motor speed: 1500 U/min Motor Capacity: 7,5 kW weight: 250 kg normal priming centrifugal pump, Housing and impeller made of stainless steel, Flange connections, Fabr. no. 22/00-125616 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

coolant capacity: 50-250 m3l/h Headroom: 20 m operating pressure: 2 bar voltage: 380 V / 50 Hz motor speed: 950 U/min Motor Capacity: 4 kW weight: 420 kg normal priming centrifugal pump, Housing and impeller made of stainless steel, Flange connections, Fabr. no. 22/00-125616 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Mohno pump, progressing cavity pump Netzsch NL 30 A, for the promotion of various media from the food sector, Pipe connection size DN50, El. Connection 400V, 1.1 kW; Year of manufacture 1991 Dimensions LxWxH approx. 153x40x90cm, weight approx. 115kg, used, functional

CNC Punching Press Manufacturer: EHT Type: Strippit 1500/30 Year of Make: 2000 CNC Control: Fanuc Working area without replacement: 2500 x 1500 mm Material thickness max.: 8 mm Punching force: 30 tons. Turret with 46 tool positions, including 4 index stations size D 3 programmable claws Metal table Used exclusively in single-shift operation incl. tools WILSON TOOL

Reference ID PP-42880 Category Flatbed Die Cutter Manufacturer Bobst Model SPrintera 106 PER Year Built 2003 Color- Impression- Working Hours - Speed 12000 sheets/h Max. size 106 x 76 cm Condition Good Location Europe Availability December 2024 Machine Description Paper : min. 70 g/m2 Solid board (depending on the quality) : up to 2000 g/m2 Corrugated board (depending on the quality) : up to 4 mm Non Stop feeder and delivery 2x Stripping Powder register is new 2024 New controls Fully automatic feeders Semi-automatic delivery units

Table surface ... 3070x1660mm Nominal pressing force ... 18t Axis X ... 3070mm Axis Y ... 1660mm Max. sheet thickness ... 6.4mm Number of positions in the tool changer ... 22 Control Machine weight ... 14850kg L x W x H ... 7600x6700x2230mm The machine is in good condition, possible to test under power.

HOLGIC Lorad MultiCare Platinum (mammographic stereotactic punch biopsy device) Tube M 149 0.25, Workstation

2 x KSB Pump ETANORM G 150-250 G10 Motor 1LG4183-4AA60 SN 02 – used - : Price per piece from location: 5.750.-€ (net) Manufacturer: KSB Type: ETANORM G 150-250 G10 Serial number: 9971143054 000100 02 and 03 Year of Make: 2007 Q400.00m3/h H 14,00m N 1460 1/min Condition: good Available: immediately Location: Frankenberg camp / Saxony

Machine Type: Pulse Arc Inverter Welding Machine Make MERKLE Type HighPULSE 452 DW Plant No.: 93.828 Connection voltage 3 x 400 volts Adjustment range 20 – 450 amps Duty cycle 50% ED at 450 amps 60% ED at 400 amps 100% ED at 330 amps Current adjustment infinitely variable Cooling inverter through built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case and 1.6 mtr. long VB cable Wire feeder 4-roller drive DV 26 Fuse 32 Amps Dimensions L x W x H 1,100 x 490 x 1,000 mm Weight 140 kg Age 10 years Condition workshop tested very good incl. UVV test report Scope of supply welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 4 mtr. long 1 piece pressure reducer with 2 pressure gauges 1 piece spare parts box complete Equipped 18 months w ...

Machine Name: High Pressure Pump Used Manufacturer: Uraca Type: KD 613-G Year of Make: 1980 Degree of protection: IP 44 Speed: 455 rpm Operating voltage: 380 / 660 V Flanges: DN 80 Frequency: 50 Hz. Delivery pressure: 100 bar Material: Steel Drive motor: 55 kW Flow rate: 266 L/min. Dimensions: L 1900 x W 1000 x H 800 mm Curb weight: Approx. 1500 kg Condition: Used Price: On request

Machine Name: High Pressure Pump Used Manufacturer: Uraca Type: RS708E/100 Year of Make: 1997 Degree of protection: IP 55 Speed: 556 rpm Operating voltage: 400 / 690 V Flanges: DN 80 Frequency: 50 Hz. Delivery pressure: 100 bar Material: Steel Drive motor: 45 kW Flow rate: 237 L/min. Dimensions: L 1700 x W 700 x H 850 mm Curb weight: Weight 1500 kg Technical documentation: No Condition: Used Price: On request

Inv. Num. : 7935 Type: Trumatic 2000 R Producer: Trumpf Created: 2003 Parameters: Compressive force: 18 t Maximum length of sheet metal plate: 2070 mm Maximum blade width: 1270 mm Maximum sheet metal plate weight: 75 kg Max. sheet thickness: 6.4 mm Maximum punching speed: 900 1/min Machine height: 2070 mm Machine length: 6000 mm Machine width: 5600 mm Machine weight: 8000 kg

stamp capacity: 2 - 63 mm throat: 110 / 200 mm Various Destaco punching iron, some with accessories: No. 3: Type 102-200, accessories: approx. 12 sets of punches and dies, technical data: see picture, price per piece incl. accessories: 350,- No. 6 & 7: Type 103-200, accessories: approx. 12 sets of punches and dies, technical data: see picture, price per piece incl. accessories 500,- 1 Raskin punching iron type 10 JL 200, throat 210 mm, install height 238 mm, material thickness 3 mm in max. 40 kg/mm². pice 175,-- EUR 1 Raskin punching iron type 15 BL 100, throat 110 mm, install height 149 mm, material thickness 3 mm in max. 40 kg/mm². pice 120,-- EUR Diverse punching dies. We can also sell each of them. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

coolant capacity: 10 m3l/h Headroom: 10 m operating pressure: 2 bar voltage: 420 V / 50 Hz motor speed: 1430 U/min engine output: 0,25 kW weight: 10 kg normal priming centrifugal pump, Housing and impeller made of stainless steel, Flange connections, Ref. no. 22/98-118884 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Liebherr slide-in gearbox from stock as good as new MPS 45X21. 1X25.97 Bosch Rexroth : ZHP5 . 23-0356 . 10014 MNR : 1695745 CMAN / CMIT Item number: 1695745

Liebherr slide-in gearbox from old stock ! As good as new MPS 45X21. 1X25.97 Bosch Rexroth : ZHP5 . 23-0356 . 10014 MNR : 1695745 CMAN / CMIT Item number: 1695745

Carrier 30AWH012HD9 & 30AWH015HD9 Heat Pump Heating power: 12kW/15kW Power Cooling: 13.5kW/16kW Refrigerant: R410a Price on request! Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at

Hoza EMU Punch This machine is ideal for punching out small moulded parts made of paper, rubber or textile goods. It has a high pressing force and fits on any stable table. The cut is initiated via a two-hand safety control. Forged knives or strip steel cuts can be inserted into the machine. Knife stroke: 30 mm Max. die-cutting format: 150 x 100 mm Weight: approx. 150 kg Colour: hammered blue Dimensions: 450 x 360 x 600 mm More items in other sizes - new and used - can be found in our shop! International shipping costs on request!

Type: 30AWH016H-9–R Year of Make: 2023 (New) Heating power: 16 kW Power cooling: 14 kW Refrigerant: R32 Original packaging! Price on request! Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at

TTS Hydraulics 7T 09 3 F PA S024 A 85 5B-S02 HOBC T LA1 COD,No. DTBO10507P SK No. BT15036893 Planetary gearboxes with hydraulics

Used machine in good condition. Available for immediate delivery. - Simultaneous positioning speed (X / Y): 106 m/min - Control type: SIEMENS 840D - Compressed air pressure min: 6 bar - Axis speed [Y axis] max: 60 m/min - Punch diameter max: 89 mm - Max. workpiece weight: 200 kg - Axis speed [X axis] max: 88 m/min - Operating hours: 9.000 - Number of turret stations (pcs): n/a - Working area max: 3.061 x 1.528 (6.000 repo) mm - Punching force: 300 kN - Material thickness (punching) max: 8 mm - Power: installed max: 30 kW - Compressed air consumption max: 30 l/s - Weight: 13.500 kg

- Excellent condition. Always maintained with Official Prima Power Service. - Only 51.849 working hours. - Full maintenance in 2023, including new Shear Blades in 2023 - SG6 Series 12. - Warranty start in 2006. - TU6 tapping. - Forming System. - 4

- Turret with 20 station (two Multi-Tool stations) - UP Forming option. - Operating hours: 21.500 - Number of turret stations (pcs): 20 (2x Index) - Number of turret stations (pcs): 20 - Working area max: 3.000 x 1.500 mm - Punching force: 300 kN

Including - Loading and Unloading - Simultaneous positioning speed (X / Y): 106 m/min - Control type: SIEMENS 840D - Compressed air pressure min: 6 bar - Axis speed [Y axis] max: 60 m/min - Punch diameter max: 89 mm - Max. workpiece weight: 200 kg - Axis speed [X axis] max: 88 m/min - Operating hours: 9.000 - Number of turret stations (pcs): 20 (D 2x Index, B, 10x, 6 6X (2x Index) - Working area max: 3.061 x 1.528 (6.000 repo) mm - Punching force: 300 kN - Material thickness (punching) max: 8 mm - Power: installed max: 30 kW - Compressed air consumption max: 30 l/s - Weight: 13.500 kg

Includes:- Night Train automatic warehouse - Control type: Siemens Sinumerik 840D - Compressed air pressure min: 6 bar - Power supply: 80 kVA - Operating hours: n/a - Number of turret stations (pcs): 20 - Turret rotation: 30 r/min - Axis speed [X axis] max: 80 m/min - Punch diameter max: 89 mm - Axis speed [Y axis] max: 60 m/min - Working area max: 1.500 x 3.000 mm - Punching force: 270 kN - Material thickness max: 8 mm - Material thickness (punching) max: 8 mm - Material thickness aluminium max: 50 mm - Material thickness steel Fe52/Fe37 max: 5 mm - Oil tank capacity: 330 l - Material thickness stainless steel max: 3 mm - Weight: 24.000 kg

Used machine in good condition. Available for immediate delivery. - Operating hours: 58.000 - Number of index tool stations, max: 21 - Max. workpiece weight: 230 kg - Punching force: 180 kN - Working area max: 3.000 x 1.550 mm - Material thickness (punching) max: 6,4 mm - Power: installed max: 3.3 kW - Dimensions (long x wide x high): 7.644 x 7.666 x 2.200 mm

Large Format 3000x1500 Sort Master / ToolMaster SheetMaster No Grip or shearMaster - Max. workpiece weight: 220 kg - Punch diameter max: 76,2 mm - Axis speed [Y axis] max: 60 m/min - Control type: Siemens SINUMERIK 840 D - Simultaneous positioning speed (X / Y): 116 m/min - Operating hours: n/a - Axis speed [X axis] max: 100 m/min - Punching force: 220 kN - Working area max: 3.050 x 1.550 mm - Material thickness (punching) max: 8 mm - Power: installed max: 9,5 kW - Weight: 19.300 kg - Dimensions (long x wide x high): 7.600 x 8.171 x 2.072 mm

Used machine in good condition. Available for immediate delivery. - Working area punching / laser (X x Y): 2.530 x 1.270 mm - Max. workpiece weight: 200 kg - Punching force: 200 kN - Maximum material thickness mild steel laser: 8 mm - Control: Siemens 840 D - Material thickness aluminium max: 8 mm - Material thickness stainless steel max: 8 mm - Laser Type: CO2 - Number of turret stations (pcs): 20 - Dimensions (long x wide x high): 6.700 x 8.000 x 2.600 mm - Weight: 17.000 kg

Used machine in good condition. Available for immediate delivery. - Simultaneous positioning speed (X / Y): 90 / 60 m/min - Number of turret stations (pcs): 19 - Control type: Siemens - Simultaneous positioning speed (X / Y): 108 m/min - Punching speed (Hit speed max.): 420 (25 mm) 1/min - Punching speed (Hit speed max.): 900 (1 mm) 1/min - Punch diameter max: 76 mm - Max. workpiece weight: 150 kg - Working area max: 2.540 x 1.270 mm - Punching force: 180 kN - Power: installed max: 9 kW - Dimensions (long x wide x high): 6.710 x 7.310 x 2.438 mm - Weight: 11.500 kg

Stanzmaschine für Mappen - Puching machine for wallets GBC Velo Bind Year 2002 - Serial.No. GE04190 Stanzkapazität 45 Blatt pro Vorgang / Punch Capacity Up to 45 sheets of 20 lb. Bond per lift Maschinenabmessung 27,3 cm H x 49,5 cm T x 49,5 cm B / Dimensions 27.3 cm H x 49.5 cm Dx 49.5 cm W 10 Gewicht 40 kg / Weight 40 kg. (88 Lbs.) Anschlusswerte 230 V, 50Hz, 3,5A / Electrical 115 V,50 Hz,3.5 A Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test