pu used for sale

2 BRINKMANN screed Boy built in 2005 and 1996 for sale immediately from stock, without guarantee and warranty

Used SMG HZPUX 350/200 - 1500/1300 moulding press in good condition! Main technical data: - Power: 510 ton - Maximum span with castle: 1460 mm - Minimum light with castle: 520 mm - Maximum span without castle: 2160 mm - Minimum light without castle: 1220 mm

1250 x 2500mm with SheetMaster loading/unloading - Lots of tooling

coolant capacity: 10 m3l/h Headroom: 20 m operating pressure: 2 bar voltage: 230/400 V - 50 Hz motor speed: 2900 U/min motor type: 90 L engine output: 2,2 kW weight: 35 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TECHNICAL SPECIFICATIONS Manufacturer: FLYGHT (XYLEM) Designation: Construction pump (submersible pump) Series: 2660.180 Type: B 226 MT Year of construction: approx. 2015 head: approx. 35 m flow rate: approx. 50 l/s Nominal data: 10.0 kW / 19.0 A Voltage: 400 V / 3 phases Start type: direct Pressure connection: F-Storz Motor protection plug: 32 A Water protection class: IP68 diving depth: 20 m Weight: 78 kg Height: 853 mm Diameter: 346 mm Screen opening: 10 mm

2 units available / single purchase possible TECHNICAL SPECIFICATIONS Manufacturer: FLYGHT (XYLEM) Designation: Construction pump (submersible pump) Series: 2670.180 Type: B 226 MT Year of construction: approx. 2015 head: approx. 40 m flow rate: approx. 90 l/s Nominal data: 18.0 kW / 32.0 A Voltage: 400 V / 3 phases Start type: Star triangle Pressure connection: F-Storz Motor protection plug: free cable end Water protection class: IP68 diving depth: 20 m Weight: 141 kg Height: 955 mm Diameter: 395 mm Screen opening: 12 mm

Magnetizing device Magnet physics MF-RI8 Item condition: New without OVP The goods originate from a plant closure in the automotive industry and were temporarily stored in paternosters. Storage traces possible. R12B1_EK More products of this category can be found in our extensive EBAY assortment. More magnetizers - new and used - can be found in our shop! International shipping costs on request!

Specifications: Shelving system: Feralco suitable for clear width: approx. 2,710 mm Projection: approx. 100 mm The scope of delivery includes: 01x push-through protection, used Material colour: RAL 2004 orange Total length: approx. 2,787 mm Profile dimensions: approx. 35 x 35 mm including 2 agraffes Weight: 7,16 kg | Pcs. Left|right L flat iron welded on, which are screwed to the shelf stand.

coolant capacity: 10 m3l/h Headroom: 20 m operating pressure: 2 bar voltage: 230/400 V - 50 Hz motor speed: 2900 U/min motor type: 90 L engine output: 2,2 kW weight: 35 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

coolant capacity: 10 m3l/h Headroom: 18 m operating pressure: 2 bar voltage: 230/400 V - 50 Hz motor type: 80 L motor speed: 2900 U/min engine output: 1,1 kW weight: 33 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

WAHLI Multi 76 multi purpose lathe Mach. No. 227 Wahli Frères S.A. in Bévilard, Switzerland For turning and milling. Spindle head vertical adjustment. Center height 125 mm ( 70-230 mm) Distance between centers 550 mm Spindle speeds 50-3000 rpm. Travels Z/X - 350/100 mm Spindle diameter 16 mm Max. working diameter 100 mm Power: 2-speed 0.5/0.9 kW motor

Grundfos circulating pump UPS 32-120 F 220 for sale, with original packaging

Description Plate die-cutter suitable for MAN Roland 300-500-700-900 with autoplate system APL and Graphometronic Film register for plates from CtP systems but also for presses from Heidelberg 52, 74, 102 and XL series and KBA Rapida presses 74, 75, 105, 130, perforations 780 and 425 mm can be switched off each

2 pieces of Caterpillar 3408 B injection pumps in pre-chamber design for sale. Both injection pumps completely overhauled.

Offer 22523 Specifications: - Pressure capacity at 10 bar 35 KN - Plunger stroke 12 mm - Projection 95 mm - Installation height approx. 134 mm - Table size approx. 230 x 190 mm - Air consumption per stroke 8.0 l - Air inlet 6 - 10 bar - Space requirement approx. W 520 x H 1450 x D 600 mm - Weight approx. 100 kg - with: - Foot switch - Pressure gauge + pressure regulator - 4 x punching tool

Groove width: 3-100 mm Drawing length: 850 mm Stroke: 870 mm Table size: 780 x 430 mm Bore range: Diameter: 10-600 mm Return speed: 40 m/min Cutting speed: 0-16 m/min Total power requirement: 8 kW Machine weight approx. 1.55 t Space requirement approx. 1.8 x 2 x 2.25 m Foundation depth: can be omitted (1.07) m because the machine looks on a steel platform A number of accessories available

Heating power: 185 kW Heating water inlet temperature: 55 C Heating water outlet temperature: 60 C Heating water volume: 32 m3/h Refrigerant: R 134a Starting current: 147 A Capacity: 2x 25 kg Operating voltage: 400 V Control voltage: 230 volts Operating pressure: 28 bar Displacement: 101 m3/h Power consumption: 43 kW Subject to prior sale - errors possible Ref. No.: E-1165

Offer 23035 Technical data approx.: - Pressure capacity 30 t. - max. sheet thickness 10 mm - max. punching diameter 105 mm - Punching performance - e.g. Sheet steel : 105 mm in 1.5 mm ; 45 mm in 5 mm - e.g. VA sheet metal : 90 mm in 1.5 mm ; 45 mm in 4 mm - Stroke 7 - 70 mm - Projection 560 mm - Maximum stroke rate 120 h/min - Single stroke / continuous stroke - Drive 400 V / 4 kW - Space requirement approx. W 8000 x H 1850 x D 1700 mm - Weight approx. 1900 kg - with: - Notice table with stops - Foot switch; - Emergency stop button - Punch quick-change device - various receptacles, punches and matrices

4 pieces of hydraulic pump flanged to electric motor complete with accessories on Euro plate for sale. Characteristics pump Rexroth A10VSO 28 DR / 31 R Vg: 26cm3 DR: 240 Bar n: 1750 1/min Engine characteristics: Hatlapa 180M -4 Power: 21kW Other accessories: - 1 piece Blitz pressure vessel 40 liters / 16 bar - 2 Hydac filters, 25 bar - 2 pieces hydraulic pump - see photos for more

Electric motor with hydraulic pump for sale. Engine characteristics: Type: 280S/M-4 Power: 85kW n: 1780 1/min Pump characteristics: n: 1760 1/min Pressure 450 bar Other hydraulic accessories available.

max. format 34 x 46 cm Year of construction: 1954 Hot foil stamping machine 1 Slide preference 1 heating plate Delivery date: immediately Price on request. We deliver and install worldwide!

Allweiler feed pump type SNF 280 ER46U4-W33 in new condition for sale. Technical data can be found in the attached data sheet.

Universal stamping machine Max impact power 50 KN Total stroke 80 mm Stroke sequence per hour 1500 Pneumatic Data

Nibbel, stamping and forming center with C frame (C – Frame stress-free annealed before mechanical processing – 15-year warranty on freedom from cracking) All with one machine: Nibbling – Stamping – Forming – Embossing – Tapping – Marking – Deburring Servo-electric punch head drive - up to 950 strokes per minute, adjustable depending on the material feed speed. Maximum punching force 300 kN Maximum sheet thickness 6.5 mm Largest workpiece weight 200 kg Machining area 1,500 mm x 4,000 mm (with repositioning up to 8,000 mm) Punching head with FANUC® drive - Programmable: - Punching stroke - Punching depth - Punching speed and - Stamping tool acceleration Tool magazine for 15 pieces up to optionally 150 pieces indexable tools Indexing accuracy 0.01° On request, the machine can be supplied with a TRUMPF® tool system Patented vertical tool magazine ...

Unused Bosch Rexroth axial piston pump. See photos !

Unused Rexroth MCR5H565ZZ33A0M1L01SO533C hydraulic drive

Farm petrol station - company petrol station - diesel petrol station composed of: 1 x 16 qbm steel tank - brand new 1 x Nozzle type K-80 - brand new Description of storage containers: 16,000 litres capacity according to EN 12285-2 (replacement for DIN 6616), above ground, double-walled, incl. test certificate. The tank has two saddle feet, a manhole with dome cover and is equipped with the following fittings: 1 filling tube with TW closure (filling cap) and immersion tube, 1 sounding tube with dipstick and dipstick lock, 1 vent pipe with vent hood, 1 brand-new limit sensor with type approval (AIII), 1 conductor and 1 spare sleeve for removal purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 8.50 m - D = 1.60 m - weight approx. 3.5 tons. - ex works, fre ...

Kettner Pressant 300 Masch-Nr. 92/56001 With accessories, intermediate layer lifter, pallet magazine and pallet transport. More images available. Kettner Pressant 300 Machine no. 92/56001 With equipment, layer pad remover, pallet magazine and pallet transport. More pictures available.

Machine type: Pulse arc inverter welding machine with touch display Make MERKLE Type HighPULSE touch 280 K Serial No. 130.233 Connection voltage 3 x 400 volts Setting range 25 – 280 amps Duty cycle 35 % d.c. at 280 amps 100% d.c. at 200 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Portable industrial plant design with a connection for water cooling Wire feeder 4-roller drive DV 26 Fuse 16 amps Dimensions L x W x H 600 x 300 x 565 mm Weight 33 kg Age: 2 years Condition workshop-tested, like new, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch SBT 307, 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll of welding wire 0.8 mm, D-300, 5 kg 1 pair of welding gloves wi ...

Machine type: Pulse arc inverter welding machine with touch display Make MERKLE Type HighPULSE touch 280 K Connection voltage 3 x 400 volts Setting range 25 – 280 amps Duty cycle 35 % d.c. at 280 amps 100% d.c. at 200 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Portable industrial plant design with a connection for water cooling Wire feeder 4-roller drive DV 26 Fuse 16 amps Dimensions L x W x H 600 x 300 x 565 mm Weight 33 kg Age: 6 months Condition workshop-tested, like new, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch SBT 307, 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll of welding wire 0.8 mm, D-300, 5 kg 1 pair of welding gloves with cuff 1 piece sp ...

Edur multi-stage centrifugal pump, 15 cbm p.h., 7.5 bar, LBU404C120L Flow rate: 15 cbm/h Head/pressure: 75 m / 7.5 bar RPM: 2,900 KW / voltage: 4.4 / 400 V, motor 7.5 KW Suction side / discharge side: DN 65 flange 180 mm (flange with milk thread connection DN 65) / DN 40 flange 150 mm Type: Stationary, pump head in stainless steel, for liquids, Bauj. 2006 L 780 mm, W 290 mm, H 350 mm Type: LBU404C120L Manuf.: Edur-Pumpenfabrik Product number: 2023002

Machine type: Pulse arc inverter welding machine Make: Rehm Type Megapuls 500 Attachment no. 228.434 Connection voltage 3 x 400 volts Setting range 10 – 500 amps Duty cycle 45 % d.c. at 500 amps 60% d.c. at 450 amps 100% d.c. at 350 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case and 1.6 mtr. long VB cable Wire feeder 4-roller drive Fuse 32 amps Dimensions L x W x H 1,030 x 600 x 1,300 mm Weight 175 kg Special accessories for filter attachment and wheels on the DV box Age approx. 10 years Condition: workshop-tested, good incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauge ...

Roller Wacker WHK 90 L, self-propelled hydraulic articulated roller, hydrostatic drive, 2 cyl. Lombardini diesel engine, air-cooled, 10 kw/14 hp, hydraulic articulated steering, vibration compression. Working width 850 mm, defective water sprinkling, weight 1,335 kg, mast for rotating warning light. Built in 1987, machine running. ------ Jodau Municipal, Environmental & Green Care Technology ------- Used machines for facility and sports field maintenance, gardening and landscaping, cemetery technology & winter service, sweeping work and disposal, environmental care, engines and more...

Stock# U2412-3 Unused progressing cavity pump by Allweiler type AEB 1E 200. Pump is driven via Nord gearbox and el motor 2.2 kW, 1445 rpm, 230/400 V, 50 hz. Pump works with rotation up to 150 rpm. Working output depends on product and rotation and can reach from 5 l/min, up to 500 l/min. At current rotation on gearbox pump can reach 60 l/min / 3600 l/h. Mounted on carbon steel base.

Stock # U2412-4 Unused carbon steel progressing cavity pump by Mono (UK) type E11B. Pump has reported output up to 1.5 m3/h. Working pressure up to 1.6 bar. Rotor works with 498 rpm. Inlet and outlet have diameter 50 mm. Pump is driven by el. motor 0.75 kW, 1425 rpm, 220-380 V, 50 hz. Technical documentation in digital form. New 2019. Never used.

• Description: Versatile punch with many inserts • Power: max. pressure: 35t • Working height: approx. 1000 mm • Dimensions: 1350 x 850 x 1724 mm • Weight: 1540 kg • In operation since: 06.1998 • Accessories: Trolley with many suitable tools

Sealing punch Deventer (Ref. No. 160-2665) for window seals Cutting width 30 mm L x W x H: 150 x 250 x 200 mm Weight approx. 3 kg The machine is in good condition, ready for operation Subject to changes, errors and prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone: 0041 62 966 18 32 Fax 0041 62 966 21 12

Gerstel / CTC Mutlti Purpose Sampler MPS complete For the LC as well as GC YOC 2014, tray for 98 vials (2ml), gas-tight injection syringes

A centrifugal pump with 10 stages with 160KW electric motor and adjustable base frame is offered. Data of the pump: 128m³/h at head 310m Speed 1430 /rpm P 139KW Year: 05/2006 Electric motor: 160KW 1000V 118A 1,485 rpm

Technogel PA20A-45L Ripple pump Ripple pump 2010, Stainless, 15L tank capacity, pump capacity 1L per min, mobile, can be connected to freezer and filling machine

PUMP MLB03WTP4101PL35 for Ryobi 520 Art.: PS2464 Name: MLB03WTP4101PL35 Ersatzteil Nr. / parts No. 91493 Material: original Ryobi (Japan)

Used RO station by EPURO type RO 2000 PL. New 2017. Technical data: Medium - water, Nominal capacity Q [m3/h] - 2.0, SDI -

The scope of delivery includes: Depth web frame, new with push-through protection Material color: sendzimir galvanized for column depth: 1,100 mm Total depth: 1,250 mm Total width: 850 mm Support angle: 1,250 x 100 x 50 mm Cross connector: 850 x 35 x 35 mm Material thickness: approx. 3 mm Weight/pcs.: approx. 12,00 kg These are goods to order with at least 10 working days delivery time! Note: The depth web frame and the integrated Push-through protection in the event of transverse and transverse damage. Longitudinal storage of containers, lattice boxes and pallets, a slipping of the storage unit. These also serve to stabilize the Pallet storage on the rack. General information about the item: This item is offered for pickup only. A transport that is also desired or a shipment of this article is associated with additional costs, which separately ...

Knives for A750 - TREIF PUMA S Article number Treif - 58114 / 846000 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60 fax. 0048/33 812 58 36 abc.inter-wiba.com.pl infointer-wiba.com.pl

RA1851 electromechanical pusher installed in a support frame made of aluminum profiles Function: Push-off of the incoming material 90° to the conveying direction Make: Transnorm outer dimensions of the frame: LxWxH=1.720x1.080x940 mm suitable for infeed conveyor up to 1000 mm total width dimensions of the push-off panel: H=600 mm, W=650 mm total weight: 108 kg Features: condition: good (used) Construction year: 2008 Länge in mm: 1720 Width in mm: 1080 Height in mm: 940 Nominal / outside width in mm: 1080 Antrieb: SEW Getriebemotor mit MOVIMOT Electric data: 380-500 KW: 0,055/0,55/S1 Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. ...

Manufacturer: TREIF Type: PUMA CE 700 EB Product holder with 45 catchers / teeth / for PUMA CE 700 EB, Art. No. 124777 Dimensions: L 180 x W 185 mm Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60 fax. 0048/33 812 58 36 abc.inter-wiba.com.pl infointer-wiba.com.pl

electro-mechanical pull installed in a mounting frame made of aluminum profiles Function: Deportation of the incoming material 90° to conveyor direction Make: Transnorm Measurement of the mounting frame: Lxwxh = 1.075 1.125 x 1 000 mm Measurement of the Abschiebepaneels: H = 600 mm, 650 mm, B = Total weight: 108 kg Features: Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

3 pieces Teflon knife for slicer TREIF type PUMA CE 700 EB Article number Treif : 244755 = 83581 - ID 16391, 12153,11695 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60 fax. 0048/33 812 58 36 abc.inter-wiba.com.pl infointer-wiba.com.pl

Gebhardt timing belt pusher straight + 90° right 200-550-100 Year of manufacture: 2007 Machine number: 1070.113 POS. 013.10 354.21 Max. Weight: 30 kg Design: built in 2 cars (parallel running, B = 610 mm) driven roller conveyor feeder railway L = 2, 0 m, optionally up to 10 m expandable Conveyor roller conveyor without drive L = 1, 70 m, on demand expandable with drive up to 5m conveyor width: 550 mm Excavation: 15 mm Conveyor speed: v = 0.35 m/sec. Support roller pitch: 100 mm Drive: Motor type WA20DT71D4BMG/IS Power: 0, 37kW Speed: 96 Design 7 shaft: hollow shaft 20 mm Voltage: 230/400 V Current: 1,25 A Transportzmasze: L x B x H = 2,05 x 1.70 x 0.70 m Weight: 230 kg Features: condition: very good (used) Construction year: 2007 Conveying length in mm: 2000 Roll width in mm: 550 Roll division in mm: 100 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Ampere: 1,25 Conveyor spe ...

Recon Part Number: 2128176 Attention: We also have various other RECON parts from different manufacturers / types available. We would be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!