128,402 used machines on RESALE, but how to find them? Machine Search
Includes cabinet with tools Auction-ID: A1-41995-152
Name: Progressing cavity pump used Manufacturer: Netzsch Type: NMO45BY04S18B Year of construction: 2007 Material: Normal steel Drive motor: 7.5 / 8.6 kW operating temperature: 20 °C Dimensions: L 2350 x W 370 x H 400 mm Empty weight: approx. 100 kg Speed: 150 - 435 - 530 rpm Flow rate: 2 - 8-10 m3/h operating pressure: 16 bar Operating voltage: 400 / 690 V Protection class: IP 55 Condition: Used Tech. Documentation: No Price: On request
Operation has not been tested. Auction-ID: A1-40137-269
Grundfos pump, order number 96500570, power, 4 kW/ 50 Hz, good condition - ready for use
sheet width:400 mm plate length:500 mm plate thickness:4 mm total power requirement:0,5 kW Punching and Nibling machine with 6 x 3 mm nibling and 4 mm for cuting
High-pressure pumps are used to clean plants and apparatus, allowing containers, filter cloths from filter presses and pipelines to be cleaned. Name: High Pressure Pump Used Manufacturer: Uraca Type: KD613 Year of construction: 1991 Material: Normal steel Drive motor: 54 kW Dimensions: L 1800 x W 1000 x H 750 mm Empty weight: approx. 2000 kg Speed: 468 rpm Flow rate: 270 liters / min. Condition: Used Tech. Documentation: Yes Price: On request
air pressure:8 bar Air consumption:NI 18 l/min. weight:110 kg dimensions of the machine ca.:700 x 300 x 1000 mm
Guide and tension spindle lathe machine - With photocopying device - 3-jaw chuck 200mm - 2 Mutifix quick-change steel holders - Moving center punch - Machine light - Chip tray Turning diameter over bed 410 mm Turning diameter over support 260 mm Turning length 1000 mm Turning diameter in the offset mm Speed 40 - 2000 rpm Center height 205 mm Spindle bore 50 mm Total power requirement 4.5 KW Machine weight approx. 1.6 t Dimensions approx. 2.4 x 1.3 x 1.5 m
Label book printing machine, 4 colors, 3 colors, 2 colors or 1 color, punching unit, 2 embossing plates, various mounting plates, laminators, UV dryers, dispensers, slitter rewinders, scanner camera, in good condition, immediately available
Breast pump stainless steel with housing, manufacturer MKT Malmi, vario gearbox Lenze, electric motor - Elektrokovina T 90L4, power 1.5 kW/220/380 V, special feature: Vario gearbox Lenze
Lathes with: - Digital display - Quick-release steel holder - 3-jaw chuck 200mm and 160mm - Chip tray - Centering tip Turning diameter over bed 460 mm Turning diameter over support 280 mm Turning length 1000 mm Center height 230 mm Circumferential diameter in offset 720 mm Spindle bore 53 mm Spindle speeds 28 - 1250 rpm Total power requirement 4.0 kW Machine weight approx. 1.8 t Dimensions approx. 2.4 x 1.4 x 1.75 mm
Lead and pull spindle lathe - 4-jaw chuck 200mm - Multifix steel bracket size B - Foot brake - Chip tray Turning diameter over bed 420 mm Turning diameter over support 290 mm Turning length 900 mm Speed 40 - 2000 rpm Tip height 210 mm Spindle bore 38 mm Total power requirement 4.0 KW Machine weight approx. 0.9 t Space requirement approx. 2.4 x 1.1 x 1.3 m Condition: unchecked (6)
Back punching machine Schmedt Präcut HHS 65; good condition; cleaned and tested; Block height max.350mm; Block thickness max.90mm; 3 replacement knives. Book block spine machine Schmedt Präcut HHS 65; good condition; cleaned and checked; max.block hight 350mm; max.block thikness 90mm; three knifes.
Sanitary centrifugal pump, Alfa Laval, 222,000 liters per hour, 45 kW, 78 A, approx. 145 kg.
Center width: 750 mm Turning diameter over bed: approx. 300 mm Turning diameter over support: approx. 190 mm Bar passage: approx. 40 mm incl. three-jaw chuck, diameter: approx. 155 mm
Lead and pull spindle lathe Three-jaw chuck 200mm Multifix Steel Bracket Size B 3 Multifix cassettes Emergency Stop Facility Turning diameter over bed 370 mm Turning diameter over support 200 mm Turning length 1000 mm Center height 185 mm Spindle bore 56 mm Tailstock quill holder MK 4 Speed 50 - 2000 rpm Drive power 4.0 kW Machine weight approx. 1.4 t Dimensions approx. 2.3 x 1.1 x 1.3 m
SKF - Batch of automotive parts - drive shafts, bearings and pumps 135KG
Label book printing machine Labelmen PW180DLU, YOC 1996, 4 colors, punching unit, embossing device, various mounting plates, laminators, UV dryers, dispensers, Slitten rewinders, in good condition, immediately Available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.
Stroke 8-40 mm, flywheel diameter 400 mm, power requirement 1.5 kW, speed 120-600 rpm
Lathes with: - 4-fold steel holder - 3-jaw chuck 315mm - Centering tip Turning diameter over bed 500 mm Turning diameter over support 320 mm Turning length 2100 mm Center height 250 mm Spindle bore 60 mm Spindle speeds 11 - 2000 rpm Total power requirement 7.0 kW Machine weight approx. 2.9 t Dimensions approx. 4.3 x 1.2 x 1.3 mm
Speed: from 35 to 3000 rpm Spindle passage: approx. 45 mm Center length: approx. 600 mm Center height above bed: approx. 180 mm Turning diameter over bed: approx. 360 mm Center height above support: 130 mm Turning diameter over support: approx. 260 mm The machine is equipped with a tailstock, a lathe steel holder and a three-jaw chuck from the manufacturer RÖHM, diameter: 160 mm and a two-axis digital display from the manufacturer FAGOR
Mubea KLH 700/760 punching machine; serial number 0159889215136; capacity 70 tons; maximum sheet width 760 mm; projection 760 mm; suitable for materials up to 450 N/mm²; punching capacity 30mm hole in 20mm steel; equipped with foot control; connection 380 V; machine weight approx. 2,500 kg; Dimensions approx. 1,850 x 1,100 x 2,150 mm
Promix 2KE multi-component dosing device with pump; electronic dosing and mixing system for two-component materials; suitable for industrial applications such as paint and coating systems; equipped with adjustable mixing ratio; equipped with pump and control module; system for automatic dosing, mixing and processing of materials; Equipped with connections and components
Condition: unchecked Item is sold as is Weight may be ggbfs. Deviate. Machine must be dismantled by the buyer and transported out of the hall area. It cannot be guaranteed that a forklift is on site.
Frequency controlled pump, TPE2 80-180 N-A-F-A-BQQE, Grundfos, new -30% - Single-stage inline pump (glanded pump) with speed-controlled, fan-cooled permanent magnet synchronous motor, - 50.5 m³/h, 360 - 4000 rpm, 2.2 KW, 12.8/18m, DN80, 10bar, 3x380-500V, - Grundfos 98437605, control panel HMI 200 standard, function module FM 300 - Frequency converter MGE90LD 2-56C-IA For air conditioning of commercial buildings, heating for commercial buildings Hot water circulation in commercial properties and much more. Special price ! The current new price of a similar product is € 4.800 excl. VAT. We still have several identical pumps, but the quantity is ending. Buy more than 1 piece there is still a great discount. If you have a UID number, we will gladly issue an invoice without VAT. As good as new in original packaging! The part was bought from a spare parts store of a co ...
Capacity 100 ton Table 880x715 mm Max. sheet thickness 3 mm Stroke per min. 360 Stroke 25 mm Ram adjustment 70 mm Distance Ram-table 400 mm 15 kW Dimensions LxWxH 3300x1600x2600 mm Total weight 10 tons
Caterpillar injection pump, for engine 3400 12 valves.
Technical data Manufacturer: Schroeder & Bauer Type: HB 10 Machine No.: 1021 Year of Make: 1977 Voltage: 380 V Frequency: 50 Hz Configuration Control: UNIDOR Electronic Tool Monitoring Type: UN 6 D.B.P.: 23 64 601 Accessories: - Work table approx. 1200 x 650 x 960 mm
Lead and pull spindle lathe - 4-jaw chuck 315mm - Multifix steel bracket size B - Feed in upper support - Bezel - Machine feet - Chip tray Turning diameter over bed 520 mm Turning diameter over support 260 mm Turning length 1600 mm Speed 14 - 710 rpm Tip height 260 mm Spindle bore 60 mm Total power requirement 11.0 KW Machine weight approx. 2.9 t Space requirement approx. 4.0 x 1.4 x 1.6 m
HYDRAULIC PUMP WEB NBR 7094 3 ~ 90 S 11/06/2006 HG 1576 INDUCTION MOTOR 60 HZ CN N HP (HP - CV )1.5 (2.0) RPM: 1740 TS 1.15 220/380 V 6.12/3.54
FPZ ABB motor: 3 kW Condition: after renovation
Stock number: PM1577, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Eccentric screw pump, Construction: On a stainless frame, Motor: 2,2 kW - 163-975 rpm., Theoretical capacity: Max 4500 l/h, Dimensions: L 1300 x W 300 x H 550 mm., Dimensions inlet: Ø 2, Dimensions outlet: Ø 2, Manufacturer: Mono, Type: SH40R8
maximum number of results exceeded
please refine your search
100 € 
